mirror of
https://github.com/torvalds/linux.git
synced 2026-05-28 00:53:34 +02:00
master
717 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Matt Vollrath
|
aa3f7fe409 |
e1000e: Unroll PTP in probe error handling
If probe fails after registering the PTP clock and its delayed work,
these resources must be released.
This was not an issue until a 2016 fix moved the e1000e_ptp_init() call
before the jump to err_register.
Fixes:
|
||
|
Matt Vollrath
|
e94eaef111 |
e1000/e1000e: Fix leak in DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented after a successful mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping would leak. In these commits, a faulty while condition caused an infinite loop in dma_error: Commit |
||
|
Jakub Kicinski
|
6df0022b6c |
Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2026-02-19 (idpf, ice, i40e, ixgbevf, e1000e) For idpf: Li Li moves the check for software marker to occur after incrementing next to clean to avoid re-encountering the same packet. He also adds a couple of checks to prevent NULL pointer dereferences and NULLs rss_key, after free, in error path so that later checks are properly evaluated. Brian Vazquez adjusts IRQ naming to have correlation with netdev naming. Sreedevi removes validation of action type as part of ntuple rule deletion. For ice: Aaron Ma breaks RDMA initialization into two steps and adjusts calls so that VSIs are entirely configured before plugging. Michal Schmidt fixes initialization of loopback VSI to have proper resources allocated to allow for loopback testing to occur. For i40e: Thomas Gleixner fixes a leak of preempt count by replacing get_cpu() with smp_processor_id(). For ixgbevf: Jedrzej adds a check for mailbox version before attempting to call an associated link state call that is supported in that mailbox version. For e1000e: Vitaly clears power gating feature for Panther Lake systems to avoid packet issues. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: clear DPG_EN after reset to avoid autonomous power-gating e1000e: introduce new board type for Panther Lake PCH ixgbevf: fix link setup issue i40e: Fix preempt count leak in napi poll tracepoint ice: fix crash in ethtool offline loopback test ice: recap the VSI and QoS info after rebuild idpf: Fix flow rule delete failure due to invalid validation idpf: change IRQ naming to match netdev and ethtool queue numbering idpf: nullify pointers after they are freed idpf: skip deallocating txq group's txqs if it is NULL idpf: skip deallocating bufq_sets from rx_qgrp if it is NULL idpf: increment completion queue next_to_clean in sw marker wait routine ==================== Link: https://patch.msgid.link/20260225211546.1949260-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vitaly Lifshits
|
0942fc6d32 |
e1000e: clear DPG_EN after reset to avoid autonomous power-gating
Panther Lake systems introduced an autonomous power gating feature for
the integrated Gigabit Ethernet in shutdown state (S5) state. As part of
it, the reset value of DPG_EN bit was changed to 1. Clear this bit after
performing hardware reset to avoid errors such as Tx/Rx hangs, or packet
loss/corruption.
Fixes:
|
||
|
Vitaly Lifshits
|
5b644464ee |
e1000e: introduce new board type for Panther Lake PCH
Add new board type for Panther Lake devices for separating device-specific features and flows. Additionally, remove the deprecated device IDs 0x57B5 and 0x57B6, which are not used by any existing devices. Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> |
||
|
Kees Cook
|
189f164e57 |
Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
32a92f8c89 |
Convert more 'alloc_obj' cases to default GFP_KERNEL arguments
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Linus Torvalds
|
43dfc13ca9 |
pci-v6.19-changes
-----BEGIN PGP SIGNATURE-----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=qSzr
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)
- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)
Resource management:
- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)
Power management and error handling:
- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)
Power control:
- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)
Endpoint framework:
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)
New native PCIe controller drivers:
- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)
- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)
- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)
Amlogic Meson PCIe controller driver:
- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)
Broadcom STB PCIe controller driver:
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)
Cadence PCIe controller driver:
- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)
MediaTek PCIe controller driver:
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)
Qualcomm PCIe controller driver:
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)
- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
STMicroelectronics STM32MP25 PCIe controller driver:
- Fix a race between link training and endpoint register
initialization (Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
Synopsys DesignWare PCIe controller driver:
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)
- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)
TI Keystone PCIe controller driver:
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"
* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...
|
||
|
Linus Torvalds
|
8f7aa3d3c7 |
Networking changes for 6.19.
Core & protocols
----------------
- Replace busylock at the Tx queuing layer with a lockless list. Resulting
in a 300% (4x) improvement on heavy TX workloads, sending twice the
number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue. Normally we perform queue re-selection when flow comes out
of idle, but under extreme circumstances the flows may be constantly
busy. Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already did
for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly
quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for packets.
- Make MPTCP use Rx backlog processing. This lowers the lock pressure,
improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor fit
for modern container workloads, where limits are imposed using cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily
aggressive rcvbuf growth and overshot when the connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC 5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API
----------
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics,
as defined by the OPEN Alliance's "Advanced diagnostic features
for 100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads IPsec
and performs RSS.
- Add info to devlink params whether the current setting is the default
or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame duplication
for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers
--------------
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback
for reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which supports
Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as other
drivers) to avoid wasting resources if feature is unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211 debugfs
interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UoDR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
||
|
Tony Nguyen
|
954ba97cca |
e1000e: Remove unneeded checks
The caller, ethtool_set_eeprom(), already performs the same checks so
these are unnecessary in the driver. This reverts commit
|
||
|
Lukas Wunner
|
383d89699c |
treewide: Drop pci_save_state() after pci_restore_state()
In 2009, commit
|
||
|
Andy Shevchenko
|
81e3db7ead |
e1000e: Switch to use %ptSp
Use %ptSp instead of open coded variants to print content of struct timespec64 in human readable format. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20251113150217.3030010-10-andriy.shevchenko@linux.intel.com Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
|
Vitaly Lifshits
|
3c7bf5af21 |
e1000e: Introduce private flag to disable K1
The K1 state reduces power consumption on ICH family network controllers during idle periods, similarly to L1 state on PCI Express NICs. Therefore, it is recommended and enabled by default. However, on some systems it has been observed to have adverse side effects, such as packet loss. It has been established through debug that the problem may be due to firmware misconfiguration of specific systems, interoperability with certain link partners, or marginal electrical conditions of specific units. These problems typically cannot be fixed in the field, and generic workarounds to resolve the side effects on all systems, while keeping K1 enabled, were found infeasible. Therefore, add the option for users to globally disable K1 idle state on the adapter. Additionally, disable K1 by default for MTL and later platforms, due to issues reported with the current configuration. Link: https://lore.kernel.org/intel-wired-lan/CAMqyJG3LVqfgqMcTxeaPur_Jq0oQH7GgdxRuVtRX_6TTH2mX5Q@mail.gmail.com/ Link: https://lore.kernel.org/intel-wired-lan/20250626153544.1853d106@onyx.my.domain/ Link: https://lore.kernel.org/intel-wired-lan/Z_z9EjcKtwHCQcZR@mail-itl/ Link: https://github.com/QubesOS/qubes-issues/issues/9896 Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2115393 Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Timo Teräs <timo.teras@iki.fi> Tested-by: Timo Teräs <timo.teras@iki.fi> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Tested-by: Avraham Koren <Avrahamx.koren@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251016-jk-iwl-next-2025-10-15-v2-14-ff3a390d9fc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
3132f0e8ef |
Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-09-03 (ixgbe, igbvf, e1000, e1000e, igb, igbvf, igc) Piotr allows for 2.5Gb and 5Gb autoneg for ixgbe E610 devices. Jedrzej refactors reading of OROM data to be more efficient on ixgbe. Kohei Enju adds reporting of loopback Tx packets and bytes on igbvf. He also removes redundant reporting of Rx bytes. Jacek Kowalski remove unnecessary u16 casts in e1000, e1000e, igb, igc, and ixgbe drivers. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ixgbe: drop unnecessary casts to u16 / int igc: drop unnecessary constant casts to u16 igb: drop unnecessary constant casts to u16 e1000e: drop unnecessary constant casts to u16 e1000: drop unnecessary constant casts to u16 igbvf: remove redundant counter rx_long_byte_count from ethtool statistics igbvf: add lbtx_packets and lbtx_bytes to ethtool statistics ixgbe: reduce number of reads when getting OROM data ixgbe: add the 2.5G and 5G speeds in auto-negotiation for E610 ==================== Link: https://patch.msgid.link/20250903202536.3696620-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jacek Kowalski
|
7e93136459 |
e1000e: drop unnecessary constant casts to u16
Remove unnecessary casts of constant values to u16. C's integer promotion rules make them ints no matter what. Additionally replace E1000_MNG_VLAN_NONE with resulting value rather than casting -1 to u16. Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> |
||
|
Vitaly Lifshits
|
90fb7db49c |
e1000e: fix heap overflow in e1000_set_eeprom
Fix a possible heap overflow in e1000_set_eeprom function by adding
input validation for the requested length of the change in the EEPROM.
In addition, change the variable type from int to size_t for better
code practices and rearrange declarations to RCT.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Torvalds
|
8be4d31cb8 |
Networking changes for 6.17.
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
||
|
Linus Torvalds
|
99e731bcb8 |
A treewide cleanup of struct cycle_counter const annotations:
The initial idea of making them const was correct as they were seperate instances. When they got embedded into larger data structures, which are even modified by the callback this got moot. The only reason why this went unnoticed is that the required container_of() casts the const attribute forcefully away. Stop pretending that it is const. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmiGkt0THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYodb/D/47tAOcL6qyTxh+E5fDj4h5M2aVQYp+ oLiBY7ejroObCAiMo6v/ajaGNEXvLXEtratFBQv1o7n12rxsKnv/XNdIbAzvMwKm 3vNx9anQ0THFnWiUKCAf/mZBc/Z9uXnjBXY0TeaFLuj4DuUMqGGs/ga32UIvEwW+ VXS592NIHYoK87VA/AIOK8AGX9VesYoxUqZmfmYn5NuJwsJDSgGaQpoH2fBVhU6p B7NRnVLYtFYpeAvL0ihFuOP03HZes5hM2wmqNtoCJJF9e39Eg9DXhsaUw8AIa1fu UCxm5sfNpMR+QN2AizbI5deHZJbFwYPy/cFrZ0AiwCfZt6NATjO7bQjvu/23yPFn klby8GizV0Q7qmiLi45EdPdid5oiBm/lNy6ICP9fN/XlHZFxAsqE/OGx626P+LPs xQK1MpHNjbkCK//X49hxQX6a0BCqSEAG4GOuEEqRxTeD9SZVzIQbcQ6CKOuBqPqc hc5o5N3suzdmq5sujQD0IiL9R960WfzsSgbmdQm+njhRz+LjAx6T419MlyePiu/5 hf8pZjl/SHn1O6RpPfJ501U+tbo1auEnUjXMGcg12dx7KE4w9s7fboFQLXruuVRr UNeVXeMRxZqXSAB1HyKQMI8lZ7nHF6FZUA+xLMusCwIYi7YU0h7I3BxDzxpZV62l zJgslDp7ZqSopw== =C0ua -----END PGP SIGNATURE----- Merge tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide cleanup of struct cycle_counter const annotations. The initial idea of making them const was correct as they were seperate instances. When they got embedded into larger data structures, which are even modified by the callback this got moot. The only reason why this went unnoticed is that the required container_of() casts the const attribute forcefully away. Stop pretending that it is const" * tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/timecounter: Fix the lie that struct cyclecounter is const |
||
|
Jakub Kicinski
|
8b5a19b4ff |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.16-rc8). Conflicts: drivers/net/ethernet/microsoft/mana/gdma_main.c |
||
|
Jacek Kowalski
|
61114910a5 |
e1000e: ignore uninitialized checksum word on tgp
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set.
Unfortunately some systems have left the factory with an uninitialized
value of 0xFFFF at register address 0x3F (checksum word location).
So on Tiger Lake platform we ignore the computed checksum when such
condition is encountered.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Tested-by: Vlad URSU <vlad@ursu.me>
Fixes:
|
||
|
Jacek Kowalski
|
536fd741c7 |
e1000e: disregard NVM checksum on tgp when valid checksum bit is not set
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set. Since Tiger Lake devices were the first to have
> this lock, some systems in the field did not meet this requirement.
> Therefore, for these transitional devices we skip checksum update and
> verification, if the valid bit is not set.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Fixes:
|
||
|
Greg Kroah-Hartman
|
e78f70bad2 |
time/timecounter: Fix the lie that struct cyclecounter is const
In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh |
||
|
Jakub Kicinski
|
62deb67fc5 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.16-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vitaly Lifshits
|
688a0d61b2 |
e1000e: set fixed clock frequency indication for Nahum 11 and Nahum 13
On some systems with Nahum 11 and Nahum 13 the value of the XTAL clock in
the software STRAP is incorrect. This causes the PTP timer to run at the
wrong rate and can lead to synchronization issues.
The STRAP value is configured by the system firmware, and a firmware
update is not always possible. Since the XTAL clock on these systems
always runs at 38.4MHz, the driver may ignore the STRAP and just set
the correct value.
Fixes:
|
||
|
Jakub Kicinski
|
b8379a59b2 |
eth: e1000e: migrate to new RXFH callbacks
Migrate to new callbacks added by commit
|
||
|
Ingo Molnar
|
41cb08555c |
treewide, timers: Rename from_timer() to timer_container_of()
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com |
||
|
Piotr Wejman
|
39aa687a84 |
net: e1000e: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
Update the driver to use the new hardware timestamping API added in commit
|
||
|
Thomas Gleixner
|
8fa7292fee |
treewide: Switch/rename to timer_delete[_sync]()
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vitaly Lifshits
|
efaaf344bc |
e1000e: change k1 configuration on MTP and later platforms
Starting from Meteor Lake, the Kumeran interface between the integrated
MAC and the I219 PHY works at a different frequency. This causes sporadic
MDI errors when accessing the PHY, and in rare circumstances could lead
to packet corruption.
To overcome this, introduce minor changes to the Kumeran idle
state (K1) parameters during device initialization. Hardware reset
reverts this configuration, therefore it needs to be applied in a few
places.
Fixes:
|
||
|
Gerhard Engleder
|
13e2297247 |
e1000e: Fix real-time violations on link up
Link down and up triggers update of MTA table. This update executes many PCIe writes and a final flush. Thus, PCIe will be blocked until all writes are flushed. As a result, DMA transfers of other targets suffer from delay in the range of 50us. This results in timing violations on real-time systems during link down and up of e1000e in combination with an Intel i3-2310E Sandy Bridge CPU. The i3-2310E is quite old. Launched 2011 by Intel but still in use as robot controller. The exact root cause of the problem is unclear and this situation won't change as Intel support for this CPU has ended years ago. Our experience is that the number of posted PCIe writes needs to be limited at least for real-time systems. With posted PCIe writes a much higher throughput can be generated than with PCIe reads which cannot be posted. Thus, the load on the interconnect is much higher. Additionally, a PCIe read waits until all posted PCIe writes are done. Therefore, the PCIe read can block the CPU for much more than 10us if a lot of PCIe writes were posted before. Both issues are the reason why we are limiting the number of posted PCIe writes in row in general for our real-time systems, not only for this driver. A flush after a low enough number of posted PCIe writes eliminates the delay but also increases the time needed for MTA table update. The following measurements were done on i3-2310E with e1000e for 128 MTA table entries: Single flush after all writes: 106us Flush after every write: 429us Flush after every 2nd write: 266us Flush after every 4th write: 180us Flush after every 8th write: 141us Flush after every 16th write: 121us A flush after every 8th write delays the link up by 35us and the negative impact to DMA transfers of other targets is still tolerable. Execute a flush after every 8th write. This prevents overloading the interconnect with posted writes. Signed-off-by: Gerhard Engleder <eg@keba.com> Link: https://lore.kernel.org/netdev/f8fe665a-5e6c-4f95-b47a-2f3281aa0e6c@lunn.ch/T/ CC: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> |
||
|
Jakub Kicinski
|
2696e451df |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.12-rc7). Conflicts: drivers/net/ethernet/freescale/enetc/enetc_pf.c |
||
|
Vitaly Lifshits
|
b847372327 |
e1000e: Remove Meteor Lake SMBUS workarounds
This is a partial revert to commit |
||
|
Jakub Kicinski
|
9c0fc36ec4 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.12-rc3). No conflicts and no adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Joe Damato
|
c6b8cd6991 |
e1000e: Link NAPI instances to queues and IRQs
Add support for netdev-genl, allowing users to query IRQ, NAPI, and queue
information.
After this patch is applied, note the IRQs assigned to my NIC:
$ cat /proc/interrupts | grep ens | cut -f1 --delimiter=':'
50
51
52
While e1000e allocates 3 IRQs (RX, TX, and other), it looks like e1000e
only has a single NAPI, so I've associated the NAPI with the RX IRQ (50
on my system, seen above).
Note the output from the cli:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'id': 145, 'ifindex': 2, 'irq': 50}]
This device supports only 1 rx and 1 tx queue. so querying that:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 145, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 145, 'type': 'tx'}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
||
|
Takamitsu Iwai
|
0cab3b0f83 |
e1000e: Remove duplicated writel() in e1000_configure_tx/rx()
Duplicated register initialization codes exist in e1000_configure_tx()
and e1000_configure_rx().
For example, writel(0, tx_ring->head) writes 0 to tx_ring->head, which
is adapter->hw.hw_addr + E1000_TDH(0).
This initialization is already done in ew32(TDH(0), 0).
ew32(TDH(0), 0) is equivalent to __ew32(hw, E1000_TDH(0), 0). It
executes writel(0, hw->hw_addr + E1000_TDH(0)). Since variable hw is
set to &adapter->hw, it is equal to writel(0, tx_ring->head).
We can remove similar four writel() in e1000_configure_tx() and
e1000_configure_rx().
commit
|
||
|
Vitaly Lifshits
|
9d9e5347b0 |
e1000e: change I219 (19) devices to ADP
Sporadic issues, such as PHY access loss, have been observed on I219 (19)
devices. It was found that these devices have hardware more closely
related to ADP than MTP and the issues were caused by taking MTP-specific
flows.
Change the MAC and board types of these devices from MTP to ADP to
correctly reflect the LAN hardware, and flows, of these devices.
Fixes:
|
||
|
Vitaly Lifshits
|
0a6ad4d9e1 |
e1000e: avoid failing the system during pm_suspend
Occasionally when the system goes into pm_suspend, the suspend might fail due to a PHY access error on the network adapter. Previously, this would have caused the whole system to fail to go to a low power state. An example of this was reported in the following Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205015 [ 1663.694828] e1000e 0000:00:19.0 eth0: Failed to disable ULP [ 1664.731040] asix 2-3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 1665.093513] e1000e 0000:00:19.0 eth0: Hardware Error [ 1665.596760] e1000e 0000:00:19.0: pci_pm_resume+0x0/0x80 returned 0 after 2975399 usecs and then the system never recovers from it, and all the following suspend failed due to this [22909.393854] PM: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x760 [e1000e] returns -2 [22909.393858] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -2 [22909.393861] PM: Device 0000:00:1f.6 failed to suspend async: error -2 This can be avoided by changing the return values of __e1000_shutdown and e1000e_pm_suspend functions so that they always return 0 (success). This is consistent with what other drivers do. If the e1000e driver encounters a hardware error during suspend, potential side effects include slightly higher power draw or non-working wake on LAN. This is preferred to a system-level suspend failure, and a warning message is written to the system log, so that the user can be aware that the LAN controller experienced a problem during suspend. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205015 Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> |
||
|
Linus Torvalds
|
51835949dd |
Networking changes for 6.11. Not much excitement - a handful of large
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmaWjBwACgkQMUZtbf5S
IrvuSRAAkJuEzTRqgURBCe4eNEQde6mJJig7l2CKHwCbFiHZpRkFHf8qKbcGWbL6
uLW33SWnKtJVDhxVKWHLq635XW7BAa80YhqGw21GDi+mIEhWXZglHj3xbXNxsMfE
4eg/kG4BkfYWFmHaXOwVWV/mr7nXf6j7WmXNeXEi32ufE1j0OL+YlQenKnMj8yP2
j9JmYa2Chwppng1SblHmcjmGkdNVwFhStKeCG+2K7v06wdDH/QYBlbgUv9gw/cxp
NlW//wgiaeX40U4O3kDwt9C+LDoh+0VrDDeVdQ+IsScLtY3PhAzEoKolFYTq2HSr
I1JpoaHNnyNsJq3DZrACQ5WlH4yDn6C2EUB6dxNnFaI9F1ZPsi+7MTl6Sei1AklD
TuQTj/lxOACBwW2Q77NU72uoxiIUauesGPHcnrAFuoCIEhZF0mso7k59BvrXhsOP
QwcLbQdc1YHNkqv/Vc7NBY+ruMsYB+5Ubbhhj2p27dp/CWFIwxI29fze4dn2uhO6
ejHN3mbqwPdSzg12YJtM6Iq61Cnwo2eVSvhTxl+ZVSZtI4nu2arzR+y7QTYmNrXP
6tkgVN9UsWeLl2xJ8wyyqL5mcvNHP2rPXWZ2X56iTaa26m+UlleeQ7YRaYtQAAr0
Ec/vlDMX64SwHhd+qwE99DXGQf2g+KklHKSLsnajJUVrWFTlRI0=
=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
||
|
Linus Torvalds
|
4fd9435641 |
Updates for timers, timekeeping and related functionality:
- Core:
- Make the takeover of a hrtimer based broadcast timer reliable during
CPU hot-unplug. The current implementation suffers from a race which
can lead to broadcast timer starvation in the worst case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
- PTP:
- Replace the architecture specific base clock to clocksource, e.g. ART
to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
- Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=8GjP
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and related functionality:
Core:
- Make the takeover of a hrtimer based broadcast timer reliable
during CPU hot-unplug. The current implementation suffers from a
race which can lead to broadcast timer starvation in the worst
case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
PTP:
- Replace the architecture specific base clock to clocksource, e.g.
ART to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place"
* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: timer: Add SOPHGO SG2002 clint
dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
dt-bindings: timer: renesas,tmu: Add RZ/G1 support
dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
clocksource/drivers/mips-gic-timer: Correct sched_clock width
clocksource/drivers/mips-gic-timer: Refine rating computation
clocksource/drivers/sh_cmt: Address race condition for clock events
clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
tick/broadcast: Make takeover of broadcast hrtimer reliable
tick/sched: Combine WARN_ON_ONCE and print_once
x86/vdso: Remove unused include
x86/vgtod: Remove unused typedef gtod_long_t
x86/vdso: Fix function reference in comment
vdso: Add comment about reason for vdso struct ordering
vdso/gettimeofday: Clarify comment about open coded function
timekeeping: Add missing kernel-doc function comments
tick: Remove unnused tick_nohz_get_idle_calls()
...
|
||
|
Jakub Kicinski
|
30b3560050 |
Merge branch 'net-make-timestamping-selectable'
First part of "net: Make timestamping selectable" from Kory Maincent. Change the driver-facing type already to lower rebasing pain. Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kory Maincent
|
2111375b85 |
net: Add struct kernel_ethtool_ts_info
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
852e42cc2d |
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-07-11 (net/intel) This series contains updates to most Intel network drivers. Tony removes MODULE_AUTHOR from drivers containing the entry. Simon Horman corrects a kdoc entry for i40e. Pawel adds implementation for devlink param "local_forwarding" on ice. Michal removes unneeded call, and code, for eswitch rebuild for ice. Sasha removed a no longer used field from igc. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Remove the internal 'eee_advert' field ice: remove eswitch rebuild ice: Add support for devlink local_forwarding param i40e: correct i40e_addr_to_hkey() name in kdoc net: intel: Remove MODULE_AUTHORs ==================== Link: https://patch.msgid.link/20240711201932.2019925-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Thomas Gleixner
|
b7625d67eb |
- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch timer and the ARM global timer (Li kunyu) - Fix a race condition in the interrupt leading to a deadlock on the SH CMT driver. Note that this fix was not tested on the platform using this timer but the fix seems reasonable enough to be picked confidently (Niklas Söderlund) - Increase the rating of the gic-timer and use the configured width clocksource register on the MIPS architecture (Jiaxun Yang) - Add the DT bindings for the TMU on the Renesas platforms (Geert Uytterhoeven) - Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas Bonnefille) - Add the rtl-otto timer driver along with the DT bindings for the Realtek platform (Chris Packham) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmaRQh0ACgkQqDIjiipP 6E+rfQgAqkAWZ9BjswxV8Fg+Hj+a1cSohKjDczqitQF5rJm25X5VvMwlXVa3XQGm yemh4tKPpll02LOiYCTyqOWzNrkVS9VsoBd5rrYjRX5aSv7UD35EXklLj4P/INwX O9CRGD6aK4Xbw66xxheYHSSh+2iRs2x2mq61+/VdcIBlAwpQo+vx7McRoJZZI+2t NFIXw8RF5dDlmmAaqiB0WnPAtcOK3SDo9fu1LEAX1ZAzvbZriLo7XLnL7ibySWVe BW1n7Ore6PN5Dvz7jMfTsOQsgAlVv6MPfp/s4EDqMfBLVqXNirzXrdhiee/ahnYP vyzQyU5HPCMiIYS45mhJF0OyDd3wyw== =wuYA -----END PGP SIGNATURE----- Merge tag 'timers-v6.11-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/event driver updates from Daniel Lezcano: - Remove unnecessary local variables initialization as they will be initialized in the code path anyway right after on the ARM arch timer and the ARM global timer (Li kunyu) - Fix a race condition in the interrupt leading to a deadlock on the SH CMT driver. Note that this fix was not tested on the platform using this timer but the fix seems reasonable enough to be picked confidently (Niklas Söderlund) - Increase the rating of the gic-timer and use the configured width clocksource register on the MIPS architecture (Jiaxun Yang) - Add the DT bindings for the TMU on the Renesas platforms (Geert Uytterhoeven) - Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas Bonnefille) - Add the rtl-otto timer driver along with the DT bindings for the Realtek platform (Chris Packham) Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org |
||
|
Jakub Kicinski
|
7c8267275d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/act_ct.c |
||
|
Tony Nguyen
|
bf130ed3aa |
net: intel: Remove MODULE_AUTHORs
We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> |
||
|
Vitaly Lifshits
|
76a0a3f9cc |
e1000e: fix force smbus during suspend flow
Commit |
||
|
Jakub Kicinski
|
76ed626479 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/aquantia/aquantia.h |
||
|
Dima Ruinskiy
|
c93a6f62cb |
e1000e: Fix S0ix residency on corporate systems
On vPro systems, the configuration of the I219-LM to achieve power
gating and S0ix residency is split between the driver and the CSME FW.
It was discovered that in some scenarios, where the network cable is
connected and then disconnected, S0ix residency is not always reached.
This was root-caused to a subset of I219-LM register writes that are not
performed by the CSME FW. Therefore, the driver should perform these
register writes on corporate setups, regardless of the CSME FW state.
This was discovered on Meteor Lake systems; however it is likely to
appear on other platforms as well.
Fixes:
|
||
|
Andy Shevchenko
|
a2fe35df41 |
net: intel: Use *-y instead of *-objs in Makefile
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |