Use scoped for-each loop when iterating over device nodes to simplify the
code, but also to ensure the device node reference is automatically
released when the loop scope ends.
Signed-off-by: Hans Zhang <18255117159@163.com>
Reviewed-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
ioc_count won't be more than MMC_IOC_MAX_CMDS (255), retries won't be more
than MMC_NO_RETRIES (6), flags is newly introduced and uses only 1 bit.
Therefore let's change them all to become u8.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, the code uses the MQRQ_XFER_SINGLE_BLOCK flag to handle write
failures by retrying with single-block transfers. However, read failures
bypass this mechanism and instead use a dedicated legacy path mmc_blk_read_single()
that performs sector-by-sector retries.
Extend the MQRQ_XFER_SINGLE_BLOCK logic to cover multi-block read failures
as well. By doing so, we can remove the redundant and complex mmc_blk_read_single()
function, unifying the retry logic for both read and write operations under
a single, consistent, easier-to-maintain mechanism.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Replacing hard-coded values with standardized macros to improve code clarity,
simplify future maintenance.
Meanwhile, introduce global bs and sg_len arrays for block sizes and SG lengths,
eliminating redundant local definitions in multiple test functions.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert to use DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() to drop the
CONFIG_PM_SLEEP to handle the conditional compilation when PM support is
disabled. This allows the compiler to automatically optimize away the
unused code paths when CONFIG_PM_SLEEP is not selected.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
These shift-by-9 operations are for converting between bytes and sectors.
Use the SECTOR_SHIFT macro to improve code readability and maintainability.
No functional changes intended.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, the mmc_host_class_dev_pm_ops and its callback
functions are wrapped in #ifdef CONFIG_PM_SLEEP to handle the
conditional compilation when PM support is disabled.
Replace this #ifdef usage with the standard pm_ptr() helpers. This
allows the compiler to automatically optimize away the unused code
paths when CONFIG_PM_SLEEP is not selected, resulting in cleaner and
more maintainable code.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The 'enable-sdio-wakeup' device tree property was marked as legacy and
superseded by the standard 'wakeup-source' property in commit 71a0151c5c
("Documentation: devicetree: fix reference to legacy wakeup properties")
back in 2015.
Since it has been a decade and the migration to the standard property
has long been completed, remove this obsolete legacy support.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Simplifies allocations by using a flexible array member in these structs.
Add __counted_by to get extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Due to errata i2493[0], multi-block write would still fail in retries.
With i2493, the MMC interface has the potential of write failures when
issuing multi-block writes operating in HS200 mode with excessive IO
supply noise.
While the errata provides guidance in hardware design and layout to
minimize the IO supply noise, in theory the write failure cannot be
resolved in hardware. The software solution to ensure the data integrity
is to add minimum 5us delay between block writes. Single-block write is
the practical way to introduce the delay.
This patch reuses recovery_mode flag, and switches to single-block
write in retry when multi-block write fails. It covers both CQE and
non-CQE cases.
[0] https://www.ti.com/lit/pdf/sprz582
Cc: stable@vger.kernel.org
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The bus width support for UHS mode is now validated in mmc_validate_host_caps().
Therefore, we can safely remove the explicit MMC_CAP_4_BIT_DATA check from
mmc_host_can_uhs(). As part of this cleanup, simplify the condition by using
the consolidated MMC_CAP_UHS flag.
Signed-off-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
UHS/DDR/HS200 modes require at least 4-bit bus support. Host controllers
that lack relevant capability registers rely on paring properties provided
by firmware, which may incorrectly set these modes. Now that mmc_validate_host_caps()
has been introduced to validate such configuration violations, let's also
add checks for UHS/DDR/HS200 modes.
This fixes an issue where, if the HS200/HS400 property is set while only
a 1-bit bus width is used, mmc_select_hs200() returns 0 without actually
performing the mode switch. Consequently, mmc_select_timing() proceeds
without falling back to mmc_select_hs(), leaving the eMMC device operating
in legacy mode (26 MHz) instead of switching to High Speed mode (52 MHz).
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
[Shawn: reword the commit msg and rework the code]
Signed-off-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Kingston eMMC IY2964 and IB2932 takes a fixed ~2 seconds for each secure
erase/trim operation regardless of size - that is, a single secure
erase/trim operation of 1MB takes the same time as 1GB. With default
calculated 3.5MB max discard size, secure erase 1GB requires ~300 separate
operations taking ~10 minutes total.
Add a card quirk, MMC_QUIRK_FIXED_SECURE_ERASE_TRIM_TIME, to set maximum
secure erase size for those devices. This allows 1GB secure erase to
complete in a single operation, reducing time from 10 minutes to just 2
seconds.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some eMMC vendors need to report manufacturing dates beyond 2025 but are
reluctant to update the EXT_CSD revision from 8 to 9. Changing the
Updating the EXT_CSD revision may involve additional testing or
qualification steps with customers. To ease this transition and avoid a
full re-qualification process, a workaround is needed. This
patch introduces a temporary quirk that re-purposes the year codes
corresponding to 2010, 2011, and 2012 to represent the years 2026, 2027,
and 2028, respectively. This solution is only valid for this three-year
period.
After 2028, vendors must update their firmware to set EXT_CSD_REV=9 to
continue reporting the correct manufacturing date in compliance with the
JEDEC standard.
The `MMC_QUIRK_BROKEN_MDT` is introduced and enabled for all Sandisk
devices to handle this behavior.
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
To prepare sdio drivers to migrate away from struct device_driver::shutdown
(and then eventually remove that callback) create a serdev driver shutdown
callback and migration code to keep the existing behaviour. Note this
introduces a warning for each driver that isn't converted yet to that
callback at register time.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/397f45c2818f6632151f92b70e547262f373c3b6.1768232321.git.u.kleine-koenig@baylibre.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip: Add memory clock auto-gating support
- dw_mmc-rockchip: Add support for the RK3506 variant
- meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
- meson-mx-sdio: Refactoring and general code improvements
- renesas_sdhi: Enable bigger data ports where available
- renesas_sdhi: Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb: Add support for the BCM72116 and BCM74371 variants
- sdhci-brcmstb: Save/restore registers during system-wide suspend/resume
- sdhci-msm: Add support for the sm8750 and the Kaanapali variants
- sdhci-msm: Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc: Add command queue support for Rockchip SOCs
- sdhci-of-dwcmshc: Add support for the Eswin EIC7700 variant
-----BEGIN PGP SIGNATURE-----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=Gf5H
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip:
- Add memory clock auto-gating support
- Add support for the RK3506 variant
- meson-mx-sdio:
- Ignore disabled "mmc-slot" child-nodes
- Refactoring and general code improvements
- renesas_sdhi:
- Enable bigger data ports where available
- Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb:
- Add support for the BCM72116 and BCM74371 variants
- Save/restore registers during system-wide suspend/resume
- sdhci-msm:
- Add support for the sm8750 and the Kaanapali variants
- Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc:
- Add command queue support for Rockchip SOCs
- Add support for the Eswin EIC7700 variant"
* tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (40 commits)
mmc: sdhci-of-dwcmshc: reduce CIT for better performance
mmc: sdhci-of-dwcmshc: Disable internal clock auto gate for Rockchip SOCs
mmc: sdhci-msm: Avoid early clock doubling during HS400 transition
MAINTAINERS: Add Shawn Lin as co-maintainer for dw_mmc drivers
mmc: sdhci-of-dwcmshc: Fix command queue support for RK3576
mmc: renesas_sdhi: Add suspend/resume hooks
mmc: renesas_sdhi: Switch to SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() and pm_ptr()
mmc: renesas_sdhi: Deassert the reset signal on probe
dt-bindings: mmc: am654: Simplify dma-coherent property
mmc: meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
mmc: meson-mx-sdio: Fix indentation in meson_mx_mmc_irq_thread()
mmc: meson-mx-sdio: Use dev_err_probe() where appropriate
mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
mmc: meson-mx-sdio: Refactor internal clock initialization
mmc: meson-mx-sdio: Use devm_clk_get_enabled()
mmc: meson-mx-sdio: Switch to regmap for register access
mmc: core: add WQ_PERCPU to alloc_workqueue users
mmc: dw_mmc-rockchip: Add memory clock auto-gating support
mmc: omap: add WQ_PERCPU to alloc_workqueue users
mmc: mtk-sd: replace use of system_wq with system_percpu_wq
...
-----BEGIN PGP SIGNATURE-----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=FnfO
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20251113150217.3030010-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Let's avoid updating the SD current limit when the maximum power is 200mA
(0.72W) or less, as this is already the default value for the SD card. In
this way we avoid sending an unnecessary command during initialization.
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
As stated in Documentation/dev-tools/checkpatch.rst, octal file
permissions are preferred over symbolic constants because they are
easier to read and understand. Replace symbolic permissions with
their octal equivalents.
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_sd_num_wr_blocks() is in the block error path.
It needs to use GFP_NOIO. There is no need to complicate
anything here.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=kOmc
-----END PGP SIGNATURE-----
Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
Rename the inner 'frm' variable to 'resp_frm' in the write path of
mmc_route_rpmb_frames() to avoid shadowing the outer 'frm' variable.
The function declares 'frm' at function scope pointing to the request
frame, but then redeclares another 'frm' variable inside the write
block pointing to the response frame. This shadowing makes the code
confusing and error-prone.
Using 'resp_frm' for the response frame makes the distinction clear
and improves code readability.
Fixes: 7852028a35 ("mmc: block: register RPMB partition with the RPMB subsystem")
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Introduce a new device tree flag to cap the maximum High-Speed (HS)
mode frequency for SD cards, accommodating board-specific
electrical limitations which cannot support the default 50Mhz HS
frequency and others.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Starting with commit f99508074e ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250827101236.927313-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add infrastructure to handle regulator undervoltage events for MMC/eMMC
cards. When an undervoltage is detected, the new handler performs a
controlled emergency suspend using a short power-off notification,
skipping the cache flush to maximize the chance of a safe shutdown.
After the operation, the card is marked as removed to prevent further
I/O and possible data corruption.
This is implemented by introducing MMC_POWEROFF_UNDERVOLTAGE to the
mmc_poweroff_type enum and refactoring the suspend logic into an
internal __mmc_suspend() helper that allows the caller to skip the cache
flush if required. The undervoltage handler is registered as a bus
operation and invoked from the core undervoltage path.
If power-off notification is not supported by the card, the handler
falls back to sleep or deselecting the card.
Additionally, update the shutdown path to avoid redundant shutdown
steps if the card is already removed
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250821130751.2089587-3-o.rempel@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Implement the core infrastructure to allow MMC bus types to handle
REGULATOR_EVENT_UNDER_VOLTAGE events from power regulators. This is
primarily aimed at allowing devices like eMMC to perform an emergency
shutdown to prevent data corruption when a power failure is imminent.
This patch introduces:
- A new 'handle_undervoltage' function pointer to 'struct mmc_bus_ops'.
Bus drivers (e.g., for eMMC) can implement this to define their
emergency procedures.
- A workqueue ('uv_work') in 'struct mmc_supply' to handle the event
asynchronously in a high-priority context.
- A new function 'mmc_handle_undervoltage()' which is called from the
workqueue. It stops the host queue to prevent races with card removal,
checks for the bus op, and invokes the handler.
- Functions to register and unregister the regulator notifier, intended
to be called by bus drivers like 'mmc_attach_mmc' when a compatible
card is detected.
The notifier is only registered for the main vmmc supply, as
undervoltage handling for vqmmc or vqmmc2 is not required at this
time.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250821130751.2089587-2-o.rempel@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Provide a function to the MMC hosts to read some blocks of data as part
of their tuning.
This function only returns the status of the read operation, not the
data read.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Link: https://lore.kernel.org/r/20250818-mobileye-emmc-for-upstream-4-v4-5-34ecb3995e96@bootlin.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a helper to check for the missing CMD23 quirk, similar to other
quirk helpers. Also reorder the helpers to match the order of the quirk
bits defined in include/linux/mmc/card.h.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Link: https://lore.kernel.org/r/20250818-mobileye-emmc-for-upstream-4-v4-2-34ecb3995e96@bootlin.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Instances are happier that way and it makes more sense anyway -
the only part of the result that is related to partition we are given
is the start sector, and that has been filled in by the caller.
Everything else is a function of the disk. Only one instance
(DASD) is ever looking at anything other than bdev->bd_disk and
that one is trivial to adjust.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Remove redundant pm_runtime_mark_last_busy() calls
MMC host:
- Convert drivers to use devm_mmc_alloc_host()
- Remove redundant pm_runtime_mark_last_busy() calls
- renesas_sdhi: Add support for the RZ/T2H and RZ/N2H variants
- renesas_sdhi: Fix incorrect auto retuning for an SDIO card
- rtsx_usb_sdmmc: Add 74 clocks in poweron flow
- rtsx_usb_sdmmc: Re-work the code in sd_set_power_mode()
- loongson2: Add driver for the Loongson-2K SD/SDIO controller
- loongson2: Add support for the Loongson-2K2000 SD/SDIO/eMMC controller
- sdhci: Drop sdhci_free_host()/sdhci_pltfm_free() interface
- sdhci: Remove the sdhci_free_host() and sdhci_pltfm_free() helpers
- sdhci-cadence: Add support for the Mobileye EyeQ controller
- sdhci-esdhc-imx: Optimize clock loopback selection
- sdhci-esdhc-imx: Don't change pinctrl in suspend if wakeup source
- sdhci-msm: Add support for the Milos variant
- sdhci-msm: Add support for the qcs8300 variant
- sdhci-msm: Ensure SD card power isn't ON when card gets removed
- sdhci-of-k1: Disable HW busy detection
-----BEGIN PGP SIGNATURE-----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=bC9D
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Remove redundant pm_runtime_mark_last_busy() calls
MMC host:
- Convert drivers to use devm_mmc_alloc_host()
- Remove redundant pm_runtime_mark_last_busy() calls
- renesas_sdhi:
- Add support for the RZ/T2H and RZ/N2H variants
- Fix incorrect auto retuning for an SDIO card
- rtsx_usb_sdmmc:
- Add 74 clocks in poweron flow
- Re-work the code in sd_set_power_mode()
- loongson2:
- Add driver for the Loongson-2K SD/SDIO controller
- Add support for the Loongson-2K2000 SD/SDIO/eMMC controller
- sdhci:
- Drop sdhci_free_host()/sdhci_pltfm_free() interface
- Remove the sdhci_free_host() and sdhci_pltfm_free() helpers
- sdhci-cadence: Add support for the Mobileye EyeQ controller
- sdhci-esdhc-imx:
- Optimize clock loopback selection
- Don't change pinctrl in suspend if wakeup source
- sdhci-msm:
- Add support for the Milos variant
- Add support for the qcs8300 variant
- Ensure SD card power isn't ON when card gets removed
- sdhci-of-k1: Disable HW busy detection"
* tag 'mmc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (102 commits)
mmc: loongson2: Unify the function prefixes for loongson2_mmc_pdata
mmc: loongson2: Fix error code in loongson2_mmc_resource_request()
dt-bindings: mmc: sdhci-msm: document the Milos SDHCI Controller
mmc: loongson2: prevent integer overflow in ret variable
mmc: Remove redundant pm_runtime_mark_last_busy() calls
mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
dt-bindings: mmc: Add sdhci compatible for qcs8300
mmc: sdhci-cadence: use of_property_present
mmc: loongson2: Add Loongson-2K2000 SD/SDIO/eMMC controller driver
dt-bindings: mmc: loongson,ls2k0500-mmc: Add compatible for Loongson-2K2000
mmc: loongson2: Add Loongson-2K SD/SDIO controller driver
dt-bindings: mmc: Add Loongson-2K SD/SDIO/eMMC controller binding
mmc: Convert ternary operator to str_true_false() helper
dt-bindings: mmc: renesas,sdhi: Document RZ/T2H and RZ/N2H support
mmc: sdhci-cadence: add Mobileye eyeQ support
dt-bindings: mmc: cdns: add Mobileye EyeQ MMC/SDHCI controller
mmc: rtsx_usb_sdmmc: Fix clang -Wimplicit-fallthrough in sd_set_power_mode()
mmc: cb710-mmc: Convert ternary operator to str_plural() helper
mmc: rtsx_usb_sdmmc: Add 74 clocks in poweron flow
mmc: rtsx_usb_sdmmc: Re-work the code in sd_set_power_mode()
...
Merge miscellaneous power management updates and cpupower utility
updates for 6.17-rc1:
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
* pm-misc:
PM: docs: Use my kernel.org address in ABI docs and DT bindings
driver core: platform: Drop dev_pm_domain_detach() call
PM: domains: Detach on device_unbind_cleanup()
PM: domains: Add flags to specify power on attach/detach
PM: Don't use "proxy" headers
* pm-tools:
cpupower: Improve Python binding's Makefile
pm: cpupower: Fix printing of CORE, CPU fields in cpupower-monitor
pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075434.3220506-1-sakari.ailus@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Calling dev_pm_domain_attach()/dev_pm_domain_detach() in bus driver
probe/remove functions can affect system behavior when the drivers
attached to the bus use devres-managed resources. Since devres actions
may need to access device registers, calling dev_pm_domain_detach() too
early, i.e., before these actions complete, can cause failures on some
systems. One such example is Renesas RZ/G3S SoC-based platforms.
If the device clocks are managed via PM domains, invoking
dev_pm_domain_detach() in the bus driver's remove function removes the
device's clocks from the PM domain, preventing any subsequent
pm_runtime_resume*() calls from enabling those clocks.
The second argument of dev_pm_domain_attach() specifies whether the PM
domain should be powered on during attachment. Likewise, the second
argument of dev_pm_domain_detach() indicates whether the domain should be
powered off during detachment.
Upcoming changes address the issue described above (initially for the
platform bus only) by deferring the call to dev_pm_domain_detach() until
after devres_release_all() in device_unbind_cleanup(). The detach_power_off
field in struct dev_pm_info stores the detach power off info from the
second argument of dev_pm_domain_attach().
Because there are cases where the device's PM domain power-on/off behavior
must be conditional (e.g., in i2c_device_probe()), the patch introduces
PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF flags to be passed
to dev_pm_domain_attach().
Finally, dev_pm_domain_attach() and its users are updated to use the newly
introduced PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF macros.
This change is preparatory.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250703112708.1621607-2-claudiu.beznea.uj@bp.renesas.com
[ rjw: Changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adjust some error messages to debug mode to avoid causing
misunderstanding it is an error.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 9a9f7e1395 ("mmc: core: Support UHS-II card control and access")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250606110121.96314-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move the BROKEN_SD_DISCARD quirk for certain SanDisk SD cards from the
`mmc_blk_fixups[]` to `mmc_sd_fixups[]`. This ensures the quirk is
applied earlier in the device initialization process, aligning with the
reasoning in [1]. Applying the quirk sooner prevents the kernel from
incorrectly enabling discard support on affected cards during initial
setup.
[1] https://lore.kernel.org/all/20240820230631.GA436523@sony.com
Fixes: 07d2872bf4 ("mmc: core: Add SD card quirk for broken discard")
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250526114445.675548-1-avri.altman@sandisk.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
It appears that some vendors provision the boot areas with valid part
tables (GPT) in order to have identifiable partitions for device and
firmware specific data, such has the qualcomm CDT (Qualcomm Config
Data Table). Additionally, these boot areas can be utilized to host
device-specific IDs, calibration data, and other critical information.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250507134538.575912-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
