mirror of
https://github.com/torvalds/linux.git
synced 2026-10-16 12:50:02 +02:00
master
335 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ben Hutchings
|
86e9ba573c |
irqchip/irq-imgpdc: Remove unused driver
The irq-imgpdc driver is controlled by CONFIG_IMGPDC_IRQ, which cannot be enabled. It used to be selected by CONFIG_SOC_TZ1090, but that was removed along with the metag architecture in Linux 4.17. Signed-off-by: Ben Hutchings <benh@debian.org> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/akvddtMQTDKLo2PH@decadent.org.uk |
||
|
Linus Torvalds
|
70cb95c736 |
soc: drivers for 7.2
There are a few added drivers, but mostly the normal maintenance to drivers
for firmware, memory controller and other soc specific hadware:
- The NXP QuickEngine gets modern MSI support, which allows some cleanups to
the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC implementations,
and flexiblity around power managedment for the serial-engine driver
as well as probing the LLCC driver using custom hardware descriptions
inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed, tegra,
broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces,
to update driver probing, object lifetimes and address minor bugs.
-----BEGIN PGP SIGNATURE-----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=27+M
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
|
||
|
Arnd Bergmann
|
49ff66206e |
FSL SOC Changes for 7.1
Freescale QUICC Engine: - Add missing cleanup on device removal and switch to irq_domain_create_linear() in interrupt controller for IO Ports - Panic on ioremap() failure in qe_reset() Freescale Management Complex: - Move fsl-mc over to device MSI infrastructure - Wait for the MC firmware to complete its boot Freescale Hypervisor: - Fix header kernel-doc warnings -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTH/wu6mIr0ZW+Vui/dkHAmvKvPUwUCad8lggAKCRDdkHAmvKvP U3/HAQCNklj/7KSYApkif9zHTi3ITtY5YkunkfTVamnx+Ti6PgD+KE1yOnXtaumM gbrwGcjenjhz+nuFuRRWJ8kN/SQeAwI= =kIgf -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmoLKU8ACgkQmmx57+YA GNm42A//bz/gpNKsJYtcA2NNVCjC5ysFBu8e7KlHAO4zJ1OJZkRglDB6Rb3E6+oR oSd4G4erumrcpGoF7szkgZDKmXul6tUi2Gov2jkrG3cNUG24KA5wUj59bq9G2Bsb b8VZa+J+YzBEcJUAikWJuaMKU0KeH/N15284qREoIoXQFk+A5YM21N4PR8vwS6bC i5rdAsmRXJwtvDWW96opUyfvVUEe+1fqniOGhRtFDPMN3wAmItd9/uFYsKxg5L6r 2cNw0q9zdHG6RPNN6f3S48BtDmzGCGLwo+O8v0P1RDuC6bU7UVXhmKVRyUMmqP9Z fOTFXqV22V6iseVzIb3PCw4jQ+YVf1ROkJBNKGgDvpQ6Q3MKe8ONbR3DF8vjNzcL vOmPIVuCQalxvdaKRg508p4Vj4dyKQz9EdGQ7oHPbqANycu/Jdlfoumg3o2IPmf6 7dI9dYeG4/egG522//ynduHPvwJU9U4oXfB64dlDv4cTjLDsabFajfLTdy7ElmXH gSDaBCc9JmZ6/ESNYmrsuXBSWeuxuH9ZB+9Ztfymt/nqnqi3kl0CPqsD1NNACneB JSczPDhl8Cu9yGYMc4kTcZNRE7B69HAn9MGbe7Jv5yOfWHo0mRoBXVz7UdakY9HU GhrdpmqCbiY6TjeTjLVXmVvJQZn+stFuP4ce5FmxxU+xTZ8Yofo= =2Tv8 -----END PGP SIGNATURE----- Merge tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers FSL SOC Changes for 7.1 Freescale QUICC Engine: - Add missing cleanup on device removal and switch to irq_domain_create_linear() in interrupt controller for IO Ports - Panic on ioremap() failure in qe_reset() Freescale Management Complex: - Move fsl-mc over to device MSI infrastructure - Wait for the MC firmware to complete its boot Freescale Hypervisor: - Fix header kernel-doc warnings * tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: bus: fsl-mc: wait for the MC firmware to complete its boot soc: fsl: qe: panic on ioremap() failure in qe_reset() soc: fsl: qe_ports_ic: switch to irq_domain_create_linear() soc: fsl: qe_ports_ic: Add missing cleanup on device removal virt: fsl_hypervisor: fix header kernel-doc warnings platform-msi: Remove stale comment fsl-mc: Remove legacy MSI implementation fsl-mc: Switch over to per-device platform MSI irqchip/gic-v3-its: Add fsl_mc device plumbing to the msi-parent handling fsl-mc: Add minimal infrastructure to use platform MSI fsl-mc: Remove MSI domain propagation to sub-devices Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Krzysztof Kozlowski
|
76841b0ea8 |
irqchip/qcom: Unify user-visible "Qualcomm" name
Various names for Qualcomm as a company are used in user-visible config options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified "Qualcomm" so it will be easier for users to identify the options when for example running menuconfig. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260427070121.18422-2-krzysztof.kozlowski@oss.qualcomm.com |
||
|
Changhuang Liang
|
ac2005bba8 |
irqchip/starfive: Rename jh8100 to jhb100
The StarFive JH8100 SoC was discontinued before production. The newly taped-out JHB100 SoC uses the same interrupt controller IP. Rename the driver file, Kconfig symbol, and internal references from "jh8100" to "jhb100" to accurately reflect the supported hardware. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260416064751.632138-3-changhuang.liang@starfivetech.com |
||
|
Ryan Chen
|
46e39ee92d |
irqchip/ast2700-intc: Add KUnit tests for route resolution
Add a KUnit suite for aspeed_intc0_resolve_route(). Cover invalid arguments, invalid domain/range data, connected and disconnected mappings, and malformed upstream range cases. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260407-irqchip-v5-3-c0b0a300a057@aspeedtech.com |
||
|
Ryan Chen
|
07825e4151 |
irqchip/ast2700-intc: Add AST2700-A2 support
The AST2700 interrupt fabric is shared by multiple integrated processors (PSP/SSP/TSP/BootMCU), each with its own interrupt controller and its own devicetree view of the system. As a result, interrupt routing cannot be treated as fixed: the valid route for a peripheral interrupt depends on which processor is consuming it. The INTC0 driver models this by creating a hierarchical irqdomain under the upstream interrupt controller selected by the interrupt-parent property in the devicetree. Information derived from this relationship is incorporated into the route resolution logic for the controller. The INTC1 driver implements the banked INTM-fed controller and forwards interrupts toward INTC0, without embedding assumptions about the final destination processor. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260407-irqchip-v5-2-c0b0a300a057@aspeedtech.com |
||
|
Icenowy Zheng
|
5d994fd7e2 |
irqchip/loongson-pch-lpc: Enable building on MIPS Loongson64
As the driver now supports OF-based platforms, it's now possible to use it on MIPS Loongson64 machines. Drop the requirement of LOONGARCH for this driver, to allow build on both MIPS-based and LoongArch-based Loongson systems. Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://patch.msgid.link/20260321092032.3502701-7-zhengxingda@iscas.ac.cn |
||
|
Ciprian Marian Costea
|
5e72917802 |
irqchip/imx-irqsteer: Add NXP S32N79 support
Add support for the interrupt steering controller found in NXP S32N79 series automotive SoCs. The S32N79 IRQ_STEER variant differs from the i.MX version by not implementing the CHANCTRL register. To handle this hardware difference, introduce a device type data structure with quirks field. The IRQSTEER_QUIRK_NO_CHANCTRL quirk skips CHANCTRL register access for S32N79 variants. The interrupt routing functionality and register layout are otherwise identical between the two variants. Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260311081154.381881-4-ciprianmarian.costea@oss.nxp.com |
||
|
Marc Zyngier
|
14b1cbcc6c |
fsl-mc: Remove legacy MSI implementation
Get rid of most of the fsl_mc MSI infrastructure, which is now replaced by common code. Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # LX2160ARDB, LS2088ARDB Tested-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Thomas Gleixner <tglx@kernel.org> Link: https://lore.kernel.org/r/20260224100936.3752303-6-maz@kernel.org Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> |
||
|
Brian Masney
|
4b52df1b4e |
irqchip/irq-pic32-evic: Allow driver to be compiled with COMPILE_TEST
This driver currently only supports builds against a PIC32 target. To avoid future breakage in the future update Kconfig so that it can be built with COMPILE_TEST enabled. [ tglx: Drop the now pointless select in the pic32 Kconfig ] Signed-off-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260222-irqchip-pic32-v1-5-37f50d1f14af@redhat.com |
||
|
Huacai Chen
|
a34d398c83 |
irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
All LoongArch irqchip drivers are adjusted, allow them to be built on both 32BIT and 64BIT platforms. Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260113085940.3344837-8-chenhuacai@loongson.cn |
||
|
Cosmin Tanislav
|
13e7b3305b |
irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
The Renesas RZ/T2H (R9A09G077) and Renesas RZ/N2H (R9A09G087) SoCs have an Interrupt Controller (ICU) that supports interrupts from external pins IRQ0 to IRQ15, and SEI, and software-triggered interrupts INTCPU0 to INTCPU15. INTCPU0 to INTCPU13, IRQ0 to IRQ13 are non-safety interrupts, while INTCPU14, INTCPU15, IRQ14, IRQ15 and SEI are safety interrupts, and are exposed via a separate register space. Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://patch.msgid.link/20251201112933.488801-3-cosmin-gabriel.tanislav.xa@renesas.com |
||
|
Linus Torvalds
|
15b87bec89 |
Boring updates for interrupt drivers:
- Support for a couple of new ARM64 and RISCV SoC variants and their
magic interrupt controllers which either can reuse existing code or
require quirks due to a botched hardware implementation.
- More section mismatch fixes.
- The usual cleanups and fixes all over the place.
-----BEGIN PGP SIGNATURE-----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=kdyt
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
"Boring updates for interrupt drivers:
- Support for a couple of new ARM64 and RISCV SoC variants and their
magic interrupt controllers which either can reuse existing code or
require quirks due to a botched hardware implementation
- More section mismatch fixes
- The usual cleanups and fixes all over the place"
* tag 'irq-drivers-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
irqchip/meson-gpio: Add support for Amlogic S6 S7 and S7D SoCs
dt-bindings: interrupt-controller: Add support for Amlogic S6 S7 and S7D SoCs
dt-bindings: interrupt-controller: aspeed,ast2700: Correct #interrupt-cells and interrupts count
irqchip/aclint-sswi: Add Nuclei UX900 support
dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT SSWI
dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT MSWI
dt-bindings: interrupt-controller: Add Anlogic DR1V90 PLIC
irqchip/irq-bcm7038-l1: Remove unused reg_mask_status()
irqchip/sifive-plic: Fix call to __plic_toggle() in M-Mode code path
irqchip/sifive-plic: Add support for UltraRISC DP1000 PLIC
irqchip/sifive-plic: Cache the interrupt enable state
dt-bindings: interrupt-controller: Add UltraRISC DP1000 PLIC
dt-bindings: vendor-prefixes: Add UltraRISC
irqchip/qcom-irq-combiner: Rename driver structure
irqchip/riscv-imsic: Inline imsic_vector_from_local_id()
irqchip/riscv-imsic: Embed the vector array in lpriv
irqchip/riscv-imsic: Remove redundant irq_data lookups
irqchip/ts4800: Drop unused module alias
irqchip/mvebu-pic: Drop unused module alias
irqchip/meson-gpio: Drop unused module alias
...
|
||
|
Marc Zyngier
|
c620438ef2 |
irqchip: Kill irq-partition-percpu
This code is now completely unused, and nobody will ever miss it. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Will Deacon <will@kernel.org> Link: https://patch.msgid.link/20251020122944.3074811-24-maz@kernel.org |
||
|
Marc Zyngier
|
64b9738eaa |
irqchip/gic-v3: Drop support for custom PPI partitions
The only thing getting in the way of correctly handling PPIs the way they were intended is the GICv3 hack that deals with PPI partitions. Remove that code, allowing the common code to kick in. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Will Deacon <will@kernel.org> Link: https://patch.msgid.link/20251020122944.3074811-22-maz@kernel.org |
||
|
Johan Hovold
|
1230fbb225 |
irqchip: Enable compile testing of Broadcom drivers
There seems to be nothing preventing the Broadcom drivers from being compile tested so enable that for wider build coverage. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> |
||
|
Sunil V L
|
4752b0cfbc |
irqchip/riscv-rpmi-sysmsi: Add ACPI support
Add ACPI support for the RISC-V RPMI system MSI based irqchip driver. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Link: https://lore.kernel.org/r/20250818040920.272664-23-apatel@ventanamicro.com Signed-off-by: Paul Walmsley <pjw@kernel.org> |
||
|
Anup Patel
|
aa43953e86 |
irqchip: Add driver for the RPMI system MSI service group
The RPMI specification defines a system MSI service group which allows application processors to receive MSIs upon system events such as graceful shutdown/reboot request, CPU hotplug event, memory hotplug event, etc. Add an irqchip driver for the RISC-V RPMI system MSI service group to directly receive system MSIs in Linux kernel. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Link: https://lore.kernel.org/r/20250818040920.272664-14-apatel@ventanamicro.com Signed-off-by: Paul Walmsley <pjw@kernel.org> |
||
|
Arnd Bergmann
|
3b6a18f0da |
irqchip: Build IMX_MU_MSI only on ARM
Compile-testing IMX_MU_MSI on x86 without PCI_MSI support results in a
build failure:
drivers/gpio/gpio-sprd.c:8:
include/linux/gpio/driver.h:41:33: error: field 'msiinfo' has incomplete type
drivers/iommu/iommufd/viommu.c:4:
include/linux/msi.h:528:33: error: field 'alloc_info' has incomplete type
Tighten the dependency further to only allow compile testing on Arm.
This could be refined further to allow certain x86 configs.
This was submitted before to address a different build failure, which was
fixed differently, but the problem has now returned in a different form.
Fixes:
|
||
|
Linus Torvalds
|
63eb28bb14 |
ARM:
- Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts. - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface. - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally. - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range. - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor. - Convert more system register sanitization to the config-driven implementation. - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls. - Various cleanups and minor fixes. LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups. RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time. - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors. - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n). - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical. - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps. - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently. - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed. - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo. - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone. - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list). - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC. - Various cleanups and fixes. x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests. - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF. x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still). - Fix a variety of flaws and bugs in the AVIC device posted IRQ code. - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation. - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry. - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs. - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU. - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model. - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care. - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance. - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data. Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI. - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand. - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs. - Clean up and document/comment the irqfd assignment code. - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique. - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions. - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL. - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely. - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation. Selftests: - Fix a comment typo. - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing). - Skip tests that hit EACCES when attempting to access a file, and rpint a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmiKXMgUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhMQf/QDhC/CP1aGXph2whuyeD2NMqPKiU 9KdnDNST+ftPwjg9QxZ9mTaa8zeVz/wly6XlxD9OQHy+opM1wcys3k0GZAFFEEQm YrThgURdzEZ3nwJZgb+m0t4wjJQtpiFIBwAf7qq6z1VrqQBEmHXJ/8QxGuqO+BNC j5q/X+q6KZwehKI6lgFBrrOKWFaxqhnRAYfW6rGBxRXxzTJuna37fvDpodQnNceN zOiq+avfriUMArTXTqOteJNKU0229HjiPSnjILLnFQ+B3akBlwNG0jk7TMaAKR6q IZWG1EIS9q1BAkGXaw6DE1y6d/YwtXCR5qgAIkiGwaPt5yj9Oj6kRN2Ytw== =j2At -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor - Convert more system register sanitization to the config-driven implementation - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls - Various cleanups and minor fixes LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n) - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list) - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC - Various cleanups and fixes x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still) - Fix a variety of flaws and bugs in the AVIC device posted IRQ code - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs - Clean up and document/comment the irqfd assignment code - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation Selftests: - Fix a comment typo - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing) - Skip tests that hit EACCES when attempting to access a file, and print a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits) Documentation: KVM: Use unordered list for pre-init VGIC registers RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map() RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs RISC-V: perf/kvm: Add reporting of interrupt events RISC-V: KVM: Enable ring-based dirty memory tracking RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap RISC-V: KVM: Delegate illegal instruction fault to VS mode RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs RISC-V: KVM: Factor-out g-stage page table management RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence RISC-V: KVM: Introduce struct kvm_gstage_mapping RISC-V: KVM: Factor-out MMU related declarations into separate headers RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect() RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range() RISC-V: KVM: Don't flush TLB when PTE is unchanged RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize() RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init() RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list ... |
||
|
Linus Torvalds
|
0b29600a30 |
Updates for interrupt chip drivers:
- Add support of forced affinity setting to yet offline CPUs for the
MIPS-GIC to ensure that the affinity of per CPU interrupts can be set
during the early bringup phase of a secondary CPU in the hotplug code
before the CPU is set online and interrupts are enabled.\
- Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI
interrupt chip
- Make the interrupt routing to RISV-V harts specification compliant so it
supports arbitrary hart indices
- Add a command line parameter and related handling to disable the generic
RISCV IMSIC mechanism on platforms which use a trap-emulated IMSIC.
Unfortunatly this is required because there is no mechanism available to
discover this programatically.
- Enable wakeup sources on the Renesas RZV2H driver
- Convert interrupt chip drivers, which use a open coded variant of
msi_create_parent_irq_domain() to use the new functionality
- Convert interrupt chip drivers, which use the old style two level
implementation of MSI support over to the MSI parent mechanism to
prepare for removing at least one of the three PCI/MSI backend variants.
- The usual cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=5LGj
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- Add support of forced affinity setting to yet offline CPUs for the
MIPS-GIC to ensure that the affinity of per CPU interrupts can be set
during the early bringup phase of a secondary CPU in the hotplug code
before the CPU is set online and interrupts are enabled
- Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI
interrupt chip
- Make the interrupt routing to RISV-V harts specification compliant so
it supports arbitrary hart indices
- Add a command line parameter and related handling to disable the
generic RISCV IMSIC mechanism on platforms which use a trap-emulated
IMSIC. Unfortunatly this is required because there is no mechanism
available to discover this programatically.
- Enable wakeup sources on the Renesas RZV2H driver
- Convert interrupt chip drivers, which use a open coded variant of
msi_create_parent_irq_domain() to use the new functionality
- Convert interrupt chip drivers, which use the old style two level
implementation of MSI support over to the MSI parent mechanism to
prepare for removing at least one of the three PCI/MSI backend
variants.
- The usual cleanups and improvements all over the place
* tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
irqchip/renesas-irqc: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
irqchip/renesas-intc-irqpin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
irqchip/riscv-imsic: Add kernel parameter to disable IPIs
irqchip/gic-v3: Fix GICD_CTLR register naming
irqchip/ls-scfg-msi: Fix NULL dereference in error handling
irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain()
irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain()
irqchip/alpine-msi: Switch to msi_create_parent_irq_domain()
irqchip/alpine-msi: Convert to __free
irqchip/alpine-msi: Convert to lock guards
irqchip/alpine-msi: Clean up whitespace style
irqchip/sg2042-msi: Switch to msi_create_parent_irq_domain()
irqchip/loongson-pch-msi.c: Switch to msi_create_parent_irq_domain()
irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper
irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper
irqchip/bcm2712-mip: Switch to msi_create_parent_irq_domain()
irqdomain: Add device pointer to irq_domain_info and msi_domain_info
irqchip/renesas-rzv2h: Remove unneeded includes
irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/aslint-sswi: Resolve hart index
...
|
||
|
Paolo Bonzini
|
314b40b3b6 |
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaIezbRccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFr/eAQDY5NIG5cR6ZcAWnPQLmGWpz2ou
pq4Jhn9E/mGR3n5L1AEAsJpfLLpOsmnLBdwfbjmW59gGsa8k3i5tjWEOJ6yzAwk=
=r+sp
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
|
||
|
Lorenzo Pieralisi
|
57d72196df |
irqchip/gic-v5: Add GICv5 ITS support
The GICv5 architecture implements Interrupt Translation Service
(ITS) components in order to translate events coming from peripherals
into interrupt events delivered to the connected IRSes.
Events (ie MSI memory writes to ITS translate frame), are translated
by the ITS using tables kept in memory.
ITS translation tables for peripherals is kept in memory storage
(device table [DT] and Interrupt Translation Table [ITT]) that
is allocated by the driver on boot.
Both tables can be 1- or 2-level; the structure is chosen by the
driver after probing the ITS HW parameters and checking the
allowed table splits and supported {device/event}_IDbits.
DT table entries are allocated on demand (ie when a device is
probed); the DT table is sized using the number of supported
deviceID bits in that that's a system design decision (ie the
number of deviceID bits implemented should reflect the number
of devices expected in a system) therefore it makes sense to
allocate a DT table that can cater for the maximum number of
devices.
DT and ITT tables are allocated using the kmalloc interface;
the allocation size may be smaller than a page or larger,
and must provide contiguous memory pages.
LPIs INTIDs backing the device events are allocated one-by-one
and only upon Linux IRQ allocation; this to avoid preallocating
a large number of LPIs to cover the HW device MSI vector
size whereas few MSI entries are actually enabled by a device.
ITS cacheability/shareability attributes are programmed
according to the provided firmware ITS description.
The GICv5 partially reuses the GICv3 ITS MSI parent infrastructure
and adds functions required to retrieve the ITS translate frame
addresses out of msi-map and msi-parent properties to implement
the GICv5 ITS MSI parent callbacks.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-28-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
||
|
Lorenzo Pieralisi
|
b4ead12d95 |
irqchip/gic-v3: Rename GICv3 ITS MSI parent
The GICv5 ITS will reuse some GICv3 ITS MSI parent functions therefore it makes sense to keep the code functionality in a compilation unit shared by the two drivers. Rename the GICv3 ITS MSI parent file and update the related Kconfig/Makefile entries to pave the way for code sharing. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-26-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Lorenzo Pieralisi
|
7ec80fb3f0 |
irqchip/gic-v5: Add GICv5 PPI support
The GICv5 CPU interface implements support for PE-Private Peripheral Interrupts (PPI), that are handled (enabled/prioritized/delivered) entirely within the CPU interface hardware. To enable PPI interrupts, implement the baseline GICv5 host kernel driver infrastructure required to handle interrupts on a GICv5 system. Add the exception handling code path and definitions for GICv5 instructions. Add GICv5 PPI handling code as a specific IRQ domain to: - Set-up PPI priority - Manage PPI configuration and state - Manage IRQ flow handler - IRQs allocation/free - Hook-up a PPI specific IRQchip to provide the relevant methods PPI IRQ priority is chosen as the minimum allowed priority by the system design (after probing the number of priority bits implemented by the CPU interface). Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-20-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Nam Cao
|
94b59d5f56 |
irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain()
Move away from the legacy MSI domain setup, switch to use msi_create_parent_irq_domain(). Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/6d23d93fa1f1e65526698f97c9888fa5d12abc7b.1750860131.git.namcao@linutronix.de |
||
|
Nam Cao
|
bafb290131 |
irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain()
Move away from the legacy MSI domain setup, switch to use msi_create_parent_irq_domain(). Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/976892e3ce64fcf52387833abee08ddfa47d2a82.1750860131.git.namcao@linutronix.de |
||
|
Thomas Gleixner
|
7a91ad7ebd |
irqchip/alpine-msi: Switch to msi_create_parent_irq_domain()
Move away from the legacy MSI domain setup, switch to use msi_create_parent_irq_domain(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/ec08fea004e7c3aa18c3f5657a8cafeb1adfcc1d.1750860131.git.namcao@linutronix.de |
||
|
Nam Cao
|
eb2c93e702 |
irqchip/irq-msi-lib: Select CONFIG_GENERIC_MSI_IRQ
irq-msi-lib directly uses struct msi_domain_info and more things which are
only available when CONFIG_GENERIC_MSI_IRQ=y.
However, there is no dependency specified and CONFIG_IRQ_MSI_LIB can be
enabled without CONFIG_GENERIC_MSI_IRQ, which causes the kernel build fail.
Make IRQ_MSI_LIB select GENEREIC_MSI_IRQ to prevent that.
Fixes:
|
||
|
Vladimir Kondratiev
|
df0f030ee7 |
irqchip/thead-c900-aclint-sswi: Generalize aclint-sswi driver and add MIPS P800 support
Refactor the Thead specific implementation of the ACLINT-SSWI irqchip: - Rename the source file and related details to reflect the generic nature of the driver - Factor out the generic code that serves both Thead and MIPS variants. This generic part is compliant with the RISC-V draft spec [1] - Provide generic and Thead specific initialization functions Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250612143911.3224046-5-vladimir.kondratiev@mobileye.com Link: https://github.com/riscvarchive/riscv-aclint [1] |
||
|
Linus Torvalds
|
c0f182c979 |
Update for interrupt chip drivers:
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221 MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing node
local copies a VM's interrupt translation table when possible. This
results in a 12% reduction of VM IPI latency in certain workloads.
- The usual cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=OS2H
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq controller updates from Thomas Gleixner:
"Update for interrupt chip drivers:
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221
MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing
node local copies a VM's interrupt translation table when possible.
This results in a 12% reduction of VM IPI latency in certain
workloads.
- The usual cleanups and improvements all over the place"
* tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/irq-pruss-intc: Simplify chained interrupt handler setup
irqchip/gic-v4.1: Use local 4_1 ITS to generate VSGI
irqchip/econet-en751221: Switch to of_fwnode_handle()
irqchip/irq-vt8500: Switch to irq_domain_create_*()
irqchip/econet-en751221: Switch to irq_domain_create_linear()
irqchip/irq-vt8500: Use fewer global variables and add error handling
irqchip/irq-vt8500: Use a dedicated chained handler function
irqchip/irq-vt8500: Don't require 8 interrupts from a chained controller
irqchip/irq-vt8500: Drop redundant copy of the device node pointer
irqchip/irq-vt8500: Split up ack/mask functions
irqchip/sg2042-msi: Fix wrong type cast in sg2044_msi_irq_ack()
irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller
irqchip/sg2042-msi: Introduce configurable chipinfo for SG2042
irqchip/sg2042-msi: Rename functions and data structures to be SG2042 agnostic
dt-bindings: interrupt-controller: Add Sophgo SG2044 MSI controller
genirq/generic-chip: Fix incorrect lock guard conversions
genirq/generic-chip: Remove unused lock wrappers
irqchip: Convert generic irqchip locking to guards
gpio: mvebu: Convert generic irqchip locking to guard()
ARM: orion/gpio:: Convert generic irqchip locking to guard()
...
|
||
|
Peter Robinson
|
9b3ae50cb9 |
irqchip/irq-bcm2712-mip: Enable driver when ARCH_BCM2835 is enabled
The BCM2712 MIP driver is required for Raspberry PI5, but it's not
automatically enabled when ARCH_BCM2835 is enabled and depends on
ARCH_BRCMSTB.
ARCH_BCM2835 shares drivers with ARCH_BRCMSTB platforms, but Raspberry PI5
does not require the BRCMSTB specific drivers, which are selected via
ARCH_BRCMSTB.
Enable the interrupt controller for both ARCH_BRCMSTB and ARCH_BCM2835.
[ tglx: Massage changelog ]
Fixes:
|
||
|
Caleb James DeLisle
|
1902a59cf5 |
irqchip: Add EcoNet EN751221 INTC
Add a driver for the interrupt controller in the EcoNet EN751221 MIPS SoC. Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250330170306.2584136-4-cjd@cjdns.fr |
||
|
Linus Torvalds
|
7d06015d93 |
pci-v6.15-changes
-----BEGIN PGP SIGNATURE-----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=gM1i
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
|
||
|
Linus Torvalds
|
336b4dae6d |
IOMMU Updates for Linux v6.15
Including:
- Core: IOMMUFD dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle in
the domain
- Give iommufd its own SW_MSI implementation along with some IRQ layer
rework
- Improvements to the handle attach API
- Core: Fixes for probe-issues from Robin
- Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
- AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
- ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework of
pm_runtime_put_autosuspend()
- Rockchip driver changes:
- Driver adjustments for recent DT probing changes
- S390 IOMMU changes:
- Support for IOMMU passthrough
- Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1
-----BEGIN PGP SIGNATURE-----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=a8Pd
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core iommufd dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle
in the domain
- Give iommufd its own SW_MSI implementation along with some IRQ
layer rework
- Improvements to the handle attach API
Core fixes for probe-issues from Robin
Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework
of pm_runtime_put_autosuspend()
Rockchip driver changes:
- Driver adjustments for recent DT probing changes
S390 IOMMU changes:
- Support for IOMMU passthrough
Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1"
* tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommu/vt-d: Fix possible circular locking dependency
iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes
iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled
iommu: apple-dart: fix potential null pointer deref
iommu/rockchip: Retire global dma_dev workaround
iommu/rockchip: Register in a sensible order
iommu/rockchip: Allocate per-device data sensibly
iommu/mediatek-v1: Support COMPILE_TEST
iommu/amd: Enable support for up to 2K interrupts per function
iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro
iommu/amd: Replace slab cache allocator with page allocator
iommu/amd: Introduce generic function to set multibit feature value
iommu: Don't warn prematurely about dodgy probes
iommu/arm-smmu: Set rpm auto_suspend once during probe
dt-bindings: arm-smmu: Document QCS8300 GPU SMMU
iommu: Get DT/ACPI parsing into the proper probe path
iommu: Keep dev->iommu state consistent
iommu: Resolve ops in iommu_init_device()
iommu: Handle race with default domain setup
iommu: Unexport iommu_fwspec_free()
...
|
||
|
Linus Torvalds
|
0f40464674 |
Updates for interrupt chip drivers:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver.
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable PCI/MSI
controllers are prone to lose interrupts when the MSI message is
updated to change the affinity because the message write consists of
three 32-bit subsequent writes, which update address and data. As these
writes are non-atomic versus the device raising an interrupt, the
device can observe a half written update and issue an interrupt on the
wrong vector. This is mitiated by a carefully orchestrated step by step
update and the observation of an eventually pending interrupt on the
CPU which issues the update. The algorithm follows the well established
method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver.
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmff454THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoZqoD/4kdHzbxfLpf7vC3NnG8NWwTq5FpbSx
6grQC9hWNMAs4n2IFjJRFLrjeX3AcdAQXL/BWuM0LfW9tQDQaVmqlSIlB/bn69KB
7HyAR6ozbOgnHKGAqFUXSLf+4pq+6q3mOgGKIF289dy14HFu4ta0DqKgkPZeQnVs
R/J8i7REUnn+YuxzSt5eOqyDPyt2EHJosSUABSWQZBlrM9jy1W7f6NqDFwawiVsa
+tv4U/bz91vjzVxwTIgt7nJK+b2HVYdxoZYuKJwPaTsj26ANPp6ltjRTeOmZhb5h
uKgw+OyzDnk6q+tjGcRqrqwl291VKxCvnRiqHFfu3CERdmI9qvpN9IRcEJqIbkcN
cakekhAyt7OO7sEPcql5vBL97e9hpb7EcH78gYxwHf8Dy0rFZUvSC5v+L6VRFnJS
XcKA1L+f9B6u5qxnBtLan9IW08HYNdvmPq6AuVjk+ndKioPUFqB2q6AtXpuA3Rmu
Y3XH/wh/q5wk0pgeByxQW6swsfpMN3OYK3mpLx475wFh2NKzcdGlwGhDFhiw8DKX
m1AESy3UZatj1a0qGaFS/M+mm9KGrDYIMrje832Wf4Yf1LGmTsDkd3/V99oazSsq
Jm4qhDASXChJXd0imQICX9hPw0aHTlLYNs54obUXVULH4HivQKIgWhUXrjG0dBDL
+tttjuv5FJxr3A==
=jPHa
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable
PCI/MSI controllers are prone to lose interrupts when the MSI message
is updated to change the affinity because the message write consists
of three 32-bit subsequent writes, which update address and data. As
these writes are non-atomic versus the device raising an interrupt,
the device can observe a half written update and issue an interrupt
on the wrong vector. This is mitiated by a carefully orchestrated
step by step update and the observation of an eventually pending
interrupt on the CPU which issues the update. The algorithm follows
the well established method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure
paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes
* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
irqchip/imx-irqsteer: Support up to 960 input interrupts
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
irqchip/davinci-cp-intc: Remove public header
irqchip/renesas-rzv2h: Add RZ/G3E support
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
riscv: sophgo: dts: Add msi controller for SG2042
irqchip: Add the Sophgo SG2042 MSI interrupt controller
dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
...
|
||
|
Chen Wang
|
c667415494 |
irqchip: Add the Sophgo SG2042 MSI interrupt controller
Add driver for Sophgo SG2042 MSI interrupt controller. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Inochi Amaoto <inochiama@gmail.com> Link: https://lore.kernel.org/all/3104216ca90a5f532bafb676c1c5b1efb19e94d1.1740535748.git.unicorn_wang@outlook.com |
||
|
Stanimir Varbanov
|
32c6c05466
|
irqchip: Add Broadcom BCM2712 MSI-X interrupt controller
Add an interrupt controller driver for MSI-X Interrupt Peripheral (MIP) hardware block found in BCM2712. The interrupt controller is used to handle MSI-X interrupts from peripherials behind PCIe endpoints like RPi1 south bridge found in RPi5. There are two MIPs on BCM2712, the first has 64 consecutive SPIs assigned to 64 output vectors, and the second has 17 SPIs, but only 8 of them are consecutive starting at the 8th output vector. Signed-off-by: Stanimir Varbanov <svarbanov@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20250224083559.47645-4-svarbanov@suse.de [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> |
||
|
Jason Gunthorpe
|
96093fe54f |
irqchip: Have CONFIG_IRQ_MSI_IOMMU be selected by irqchips that need it
Currently, IRQ_MSI_IOMMU is selected if DMA_IOMMU is available to provide an implementation for iommu_dma_prepare/compose_msi_msg(). However, it'll make more sense for irqchips that call prepare/compose to select it, and that will trigger all the additional code and data to be compiled into the kernel. If IRQ_MSI_IOMMU is selected with no IOMMU side implementation, then the prepare/compose() will be NOP stubs. If IRQ_MSI_IOMMU is not selected by an irqchip, then the related code on the iommu side is compiled out. Link: https://patch.msgid.link/r/a2620f67002c5cdf974e89ca3bf905f5c0817be6.1740014950.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Thomas Gleixner
|
fe35ecee8e |
irqchip/riscv-imsic: Move to common MSI library
Simplify the leaf MSI domain handling in the RISC-V IMSIC driver by using msi_lib_init_dev_msi_info() and msi_lib_irq_domain_select() provided by the common MSI library. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250217085657.789309-4-apatel@ventanamicro.com |
||
|
Geert Uytterhoeven
|
e06c9e3682 |
irqchip/lan966x-oic: Make CONFIG_LAN966X_OIC depend on CONFIG_MCHP_LAN966X_PCI
The Microchip LAN966x outband interrupt controller is only present on
Microchip LAN966x SoCs, and only used in PCI endpoint mode. Hence add a
dependency on MCHP_LAN966X_PCI, to prevent asking the user about this
driver when configuring a kernel without Microchip LAN966x PCIe support.
Fixes:
|
||
|
Linus Torvalds
|
4c551165e7 |
Updates for the interrupt subsystem:
- Consolidation of the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting. Some
interrupt chips require that affinity changes are made from the context
of handling an interrupt to avoid certain race conditions. For x86 this
was the default, but with interrupt remapping this requirement was
lifted and a flag was introduced which tells the core code that
affinity changes can be done in any context. Unrestricted affinity
changes are the default for the majority of interrupt chips. RISCV has
the requirement to add the deferred mode to one of it's interrupt
controllers, but with the original implementation this would require to
add the any context flag to all other RISC-V interrupt chips. That's
backwards, so reverse the logic and require that chips, which need the
deferred mode have to be marked accordingly. That avoids chasing the
'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=q4rj
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
- Consolidate the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting.
Some interrupt chips require that affinity changes are made from the
context of handling an interrupt to avoid certain race conditions.
For x86 this was the default, but with interrupt remapping this
requirement was lifted and a flag was introduced which tells the core
code that affinity changes can be done in any context. Unrestricted
affinity changes are the default for the majority of interrupt chips.
RISCV has the requirement to add the deferred mode to one of it's
interrupt controllers, but with the original implementation this
would require to add the any context flag to all other RISC-V
interrupt chips. That's backwards, so reverse the logic and require
that chips, which need the deferred mode have to be marked
accordingly. That avoids chasing the 'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
* tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()
genirq/timings: Add kernel-doc for a function parameter
genirq: Remove IRQ_MOVE_PCNTXT and related code
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
genirq: Provide IRQCHIP_MOVE_DEFERRED
hexagon: Remove GENERIC_PENDING_IRQ leftover
ARC: Remove GENERIC_PENDING_IRQ
genirq: Remove handle_enforce_irqctx() wrapper
genirq: Make handle_enforce_irqctx() unconditionally available
irqchip/loongarch-avec: Add multi-nodes topology support
irqchip/ts4800: Replace seq_printf() by seq_puts()
irqchip/ti-sci-inta : Add module build support
irqchip/ti-sci-intr: Add module build support
irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function
irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args
genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown
kexec: Consolidate machine_kexec_mask_interrupts() implementation
genirq: Reuse irq_thread_fn() for forced thread case
genirq: Move irq_thread_fn() further up in the code
|
||
|
Nicolas Frayer
|
b8b26ae398 |
irqchip/ti-sci-inta : Add module build support
Add module build support in Kconfig for the TI SCI interrupt aggregator driver. The driver's default build is built-in and it also depends on ARCH_K3 as the driver uses some 64 bit ops and should only be built for 64-bit platforms. Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/all/20241224-timodules-v4-2-c5e010f58e2c@baylibre.com |
||
|
Nicolas Frayer
|
2d95ffaecb |
irqchip/ti-sci-intr: Add module build support
Add module build support in Kconfig for the TI SCI interrupt router driver. This driver depends on the TI sci firmware driver which aready supports module build. Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/all/20241224-timodules-v4-1-c5e010f58e2c@baylibre.com |
||
|
Geert Uytterhoeven
|
9151299ee5 |
irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when compile-testing
Merely enabling compile-testing should not enable additional functionality.
Fixes:
|
||
|
Linus Torvalds
|
5c2b050848 |
A set of updates for the interrupt subsystem:
- Tree wide:
* Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
- Core code:
* Prevent freeing an interrupt in the devres code which is not managed
by devres in the first place.
* Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
* Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which checks
whether ksoftirqd should be woken up. The latter is a pointless
exercise as both soft interrupts are raised in the context of the
timer interrupt and therefore never wake up ksoftirqd.
* Delegate timer/hrtimer soft interrupt processing to a dedicated thread
on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
- Drivers:
* New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
* Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU cluster
has its own GIC (Generic Interrupt Controller). This requires to
access the GIC of a remote cluster through a redirect register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC details.
* Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
* Small cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=JqxC
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
||
|
Inochi Amaoto
|
25caea955c |
irqchip: Add T-HEAD C900 ACLINT SSWI driver
Add a driver for the T-HEAD C900 ACLINT SSWI device. This device allows the system with T-HEAD cpus to send ipi via fast device interface. Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241031060859.722258-3-inochiama@gmail.com |
||
|
Nathan Chancellor
|
0053892ff7 |
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
Without SMP enabled (such as in allnoconfig), there is a Kconfig warning
because CONFIG_IRQ_EFFECTIVE_AFF_MASK is unconditionally selected by
CONFIG_MIPS_GIC:
WARNING: unmet direct dependencies detected for GENERIC_IRQ_EFFECTIVE_AFF_MASK
Depends on [n]: SMP [=n]
Selected by [y]:
- MIPS_GIC [=y]
Add a dependency on SMP to the selection, which matches all other
selections of CONFIG_IRQ_EFFECTIVE_AFF_MASK.
Fixes:
|
||
|
Paul Burton
|
322a906387 |
irqchip/mips-gic: Multi-cluster support
The MIPS I6500 CPU & CM (Coherence Manager) 3.5 introduce the concept of
multiple clusters to the system. In these systems, each cluster contains
its own GIC, so the GIC isn't truly global any longer. Access to
registers in the GICs of remote clusters is possible using a redirect
register block much like the redirect register blocks provided by the
CM & CPC, and configured through the same GCR_REDIRECT register that
mips_cm_lock_other() abstraction builds upon.
It is expected that external interrupts are connected identically on all
clusters. That is, if there is a device providing an interrupt connected
to GIC interrupt pin 0 then it should be connected to pin 0 of every GIC
in the system. For the most part, the GIC can be treated as though it is
still truly global, so long as interrupts in the cluster are configured
properly.
Introduce support for such multi-cluster systems in the MIPS GIC irqchip
driver. A newly introduced gic_irq_lock_cluster() function allows:
1) Configure access to a GIC in a remote cluster via the redirect
register block, using mips_cm_lock_other().
Or:
2) Detect that the interrupt in question is affine to the local
cluster and plain old GIC register access to the GIC in the
local cluster should be used.
It is possible to access the local cluster's GIC registers via the
redirect block, but keeping the special case for them is both good for
performance (because we avoid the locking & indirection overhead of
using the redirect block) and necessary to maintain compatibility with
systems using CM revisions prior to 3.5 which don't support the redirect
block.
The gic_irq_lock_cluster() function relies upon an IRQs effective
affinity in order to discover which cluster the IRQ is affine to. In
order to track this & allow it to be updated at an appropriate point
during gic_set_affinity() select the generic support for effective
affinity using CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK.
gic_set_affinity() is the one function which gains much complexity. It
now deconfigures routing to any VP(E), ie. CPU, on the old cluster when
moving affinity to a new cluster.
gic_shared_irq_domain_map() moves its update of the IRQs effective
affinity to before its use of gic_irq_lock_cluster(), to ensure that
operation is on the cluster the IRQ is affine to.
The remaining changes are straightforward use of the gic_irq_lock_cluster()
function to select between local cluster & remote cluster code-paths when
configuring interrupts.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/all/20241028175935.51250-5-arikalo@gmail.com
|