- Fixes for evdev and input compat handling to zero-initialize on-stack
absinfo and force-feedback effect structures before partial or compat
copies from userspace, preventing kernel stack memory disclosure
- Fixes for the Synaptics RMI4 driver to prevent an out-of-bounds read
when writing multi-chunk blocks over SMBus and to avoid a NULL pointer
dereference during suspend/resume when the RMI device is unbound
- Fixes for the soc_button_array driver to propagate -EPROBE_DEFER on
non-Bay Trail/Cherry Trail platforms (fixing broken power and volume
buttons on the Microsoft Surface Pro 11) and to validate the ACPI
package element count before dereferencing
- A fix for the adp5588-keys driver to cache the initial GPIO hardware
state before registering the gpiochip so pre-configured pin states are
not clobbered by GPIO hogs during registration
- A fix for the cyttsp5 touchscreen driver to clamp the device-supplied
HID report size before copying into the response buffer, preventing a
buffer overflow
- A fix for the HP SDC serio driver to use timer_shutdown_sync() on
module exit so the periodic kicker timer cannot rearm itself during
teardown
- A fix for the eeti_ts touchscreen driver to export its OF module alias
so the module autoloads on Device Tree platforms
- Updates to the xpad joystick driver adding support for the Victrix Pro
BFG controller and Azeron devices, and fixing the device type
classification for the PDP Marvel Xbox 360 controller
- Quirks for the i8042 and atkbd drivers to keep the built-in keyboards
functional on the Acer Aspire Go 15 AG15-42P and Xiaomi Redmi Book Pro
16 2026
- A quirk for the Synaptics PS/2 touchpad driver disabling SMBus
InterTouch on the Lenovo ThinkPad T440p (board ID 2722) so the
touchpad and TrackPoint respond immediately at boot
- Other minor updates and documentation fixes, including reading the
"ti,poll-period" property as u32 in tsc2007, adding the mt6572
compatible to the MediaTek keypad Device Tree binding, fixing an
attribute name typo in the trackpoint sysfs ABI documentation, and
documenting that no new LED codes should be added to the input
subsystem.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaq9j+gAKCRBAj56VGEWX
nJ5KAQDnTOivIghgIGnlKTIYLSV4cJ0fWJh7J1/ubx9soK+9RwD/bDUdyryAaSTr
x95U7/fEvq/lXBFyK2LXyahuTC6vNQY=
=Vsfi
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Fixes for evdev and input compat handling to zero-initialize on-stack
absinfo and force-feedback effect structures before partial or compat
copies from userspace, preventing kernel stack memory disclosure
- Fixes for the Synaptics RMI4 driver to prevent an out-of-bounds read
when writing multi-chunk blocks over SMBus and to avoid a NULL
pointer dereference during suspend/resume when the RMI device is
unbound
- Fixes for the soc_button_array driver to propagate -EPROBE_DEFER on
non-Bay Trail/Cherry Trail platforms (fixing broken power and volume
buttons on the Microsoft Surface Pro 11) and to validate the ACPI
package element count before dereferencing
- A fix for the adp5588-keys driver to cache the initial GPIO hardware
state before registering the gpiochip so pre-configured pin states
are not clobbered by GPIO hogs during registration
- A fix for the cyttsp5 touchscreen driver to clamp the device-supplied
HID report size before copying into the response buffer, preventing a
buffer overflow
- A fix for the HP SDC serio driver to use timer_shutdown_sync() on
module exit so the periodic kicker timer cannot rearm itself during
teardown
- A fix for the eeti_ts touchscreen driver to export its OF module
alias so the module autoloads on Device Tree platforms
- Updates to the xpad joystick driver adding support for the Victrix
Pro BFG controller and Azeron devices, and fixing the device type
classification for the PDP Marvel Xbox 360 controller
- Quirks for the i8042 and atkbd drivers to keep the built-in keyboards
functional on the Acer Aspire Go 15 AG15-42P and Xiaomi Redmi Book
Pro 16 2026
- A quirk for the Synaptics PS/2 touchpad driver disabling SMBus
InterTouch on the Lenovo ThinkPad T440p (board ID 2722) so the
touchpad and TrackPoint respond immediately at boot
- Other minor updates and documentation fixes, including reading the
"ti,poll-period" property as u32 in tsc2007, adding the mt6572
compatible to the MediaTek keypad Device Tree binding, fixing an
attribute name typo in the trackpoint sysfs ABI documentation, and
documenting that no new LED codes should be added to the input
subsystem
* tag 'input-for-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: hp_sdc - shut down kicker timer on module exit
Input: xpad - add support for Victrix Pro BFG Controller
Input: tsc2007 - read "ti,poll-period" as u32
Input: trackpoint - fix the inertia attribute name in the ABI document
Input: eeti_ts - publish the OF module alias
Input: xpad - add support for Azeron devices
Input: xpad - fix PDP Marvel Xbox 360 controller
Input: document that no new LED codes should be added
Input: soc_button_array - check btns_desc->package.count
Input: soc_button_array - fix MS Surface Pro 11 probe failure
Input: i8042 - add quirk for Acer Aspire Go 15 AG15-42P
Input: synaptics - disable InterTouch on ThinkPad T440p (board id 2722)
Input: cyttsp5 - clamp the HID report size before memcpy
Input: zero ff_effect before compat copy in input_ff_effect_from_user
Input: evdev - zero absinfo before partial copy in EVIOCSABS
Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound
Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block()
Input: atkbd - skip deactivate for Xiaomi Redmi Book Pro 16 2026
dt-bindings: input: mediatek,mt6779-keypad: add mt6572
Input: adp5588-keys - cache GPIO state before registering the gpiochip
Azeron controllers (Cyro, Cyborg, Classic/Compact, Cyro Lefty,
Cyborg II and Keyzen) present a standard Xbox 360 controller
interface, so they work with the existing xpad driver once their
USB IDs are added.
The 0x16d0 vendor ID is a shared block, but this is safe because
xpad only binds interfaces that match the Xbox 360 signature.
Tested with an Azeron Keyzen.
Signed-off-by: Roberts Kursitis <roberts.kursitis@azeron.eu>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260906143040.162418-1-roberts.kursitis@azeron.eu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The PDP Marvel Xbox 360 controller with USB ID 0e6f:0147 is
incorrectly classified as an Xbox One controller.
With the current XTYPE_XBOXONE classification, the controller is
detected but produces no input, while its four player LEDs continue
blinking indefinitely.
Classify USB ID 0e6f:0147 as an Xbox 360 controller instead.
Tested on a PDP Marvel Xbox 360 controller with USB ID 0e6f:0147.
All inputs register correctly and the player LED indicates the
current player.
Fixes: c225370e01 ("Input: xpad - sync supported devices with 360Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Nyberg <SlickStretch3.0@gmail.com>
Link: https://patch.msgid.link/20260910071627.236014-1-SlickStretch3.0@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code than
removed, which was a nice change. Highlights in this merge request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while, with the only reported
issues being some major merge conflicts. Miguel pointed out some of
these with the Rust tree merge, which is the majority of them. I'll
follow up with a diffstat of the merge resolution I made against your
most recent tree, which works for me.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCao143A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtUgCeKB62gT1JfA86cg3NDB1opp+10N0An3oBBegQ
IJLqJgK45dTNtMGBwGFV
=68af
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
-----BEGIN PGP SIGNATURE-----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=4ayG
-----END PGP SIGNATURE-----
Merge tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...
iforce_process_packet() reads fixed fields from joystick, wheel and
status packets without first checking their lengths. In particular, the
shared hats-and-buttons helper unconditionally reads data[6]. The status
tail is a sequence of 16-bit effect addresses, but an incomplete final
address is also consumed. A successful zero-length USB URB additionally
reads the packet ID before the common parser is called.
Reject the zero-length USB transfer, require the seven-byte joystick and
wheel prefixes and the two-byte status prefix, and consume only complete
status-tail addresses.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260720115018.75045-1-pengpeng@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
psxpad_spi_suspend() retrieves the controller state with
spi_get_drvdata(), but probe never stores it, so suspend dereferences a
NULL pointer. Store it during probe.
Fixes: 8be193c7b1 ("Input: add support for PlayStation 1/2 joypads connected via SPI")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260721055551.1714965-1-lilinmao@kylinos.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use namespaced exports for IIO consumer API functions.
This will make it easier to manage the IIO export surface. Consumer drivers
will only be provided access to a specific set of functions, thereby
restricting usage of internal IIO functions by other parts of the kernel.
This change cannot be split into several parts without breaking
bisectability, thus all of the affected drivers are modified at once.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/akNYib9hQFNN1fA9@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags)) {
...
}
The index is masked only with 0x7f, so it ranges 0..127, but
core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index
of 32..127 the test_and_set_bit()/test_and_clear_bit() is an
out-of-bounds single-bit read-modify-write past the array. core_effects[]
is the second-to-last member of struct iforce, so the write lands in the
trailing members and beyond the embedding kzalloc()'d iforce_serio /
iforce_usb object.
data[1] is unvalidated device payload on both transports (the USB
interrupt endpoint and serio), and the status path is not gated on force
feedback being present, so a malicious or counterfeit device can set or
clear a bit at an attacker-chosen offset past the object.
Reject an out-of-range index instead of indexing with it. Bound against
the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so
the check guarantees memory safety regardless of how many effects the
device registered. A legitimate "effect started/stopped" status always
carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are
unaffected; the neighbouring mark_core_as_ready() loop is already bounded
and is left untouched.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260613-b4-disp-4828d263-v1-1-02320e1a89dd@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into next
Sync up with mainline to pull in a fix to IMS PCU driver and other
enhancements.
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260515164848.497608-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add the VID/PIDs for the ASUS ROG RAIKIRI II controller to xpad_device
and the VID to xpad_table. The controller has a physical PC/XBOX toggle
which switches between XBOX360 and XBOXONE protocols.
Signed-off-by: Dmitriy Zharov <contact@zharov.dev>
Link: https://patch.msgid.link/20260430183522.122151-1-contact@zharov.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 4ef4636707 ("Input: xpad - fix Share button on Xbox One controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
gf2k_read() decodes the hat position from a 4-bit field and uses it
directly to index gf2k_hat_to_axis[]. The lookup table only has nine
entries, so malformed packets can read past the end of the fixed table.
Skip hat reporting when the decoded value falls outside the lookup
table instead of forcing it to the neutral position. This keeps the
fix local and avoids reporting a made-up axis state for malformed
packets.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260407120001.1-gf2k-v2-pengpeng@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add device IDs for the Razer Wolverine V3 Pro controller in both
wired (0x0a57) and wireless 2.4 GHz dongle (0x0a59) modes.
The controller uses the Xbox 360 protocol (vendor-specific class,
subclass 93, protocol 1) on interface 0 with an identical 20-byte
input report layout, so no additional processing is needed.
Signed-off-by: Zoltan Illes <zoliviragh@gmail.com>
Link: https://patch.msgid.link/20260329220031.1325509-1-137647604+ZlordHUN@users.noreply.github.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
All items in the TODO block have since been addressed: axis tuning,
analog button handling, rumble support, and dance pad USB IDs are all
implemented. The manual changelog is also removed as history is tracked
in git.
Signed-off-by: Elliot Tester <elliotctester1@gmail.com>
Link: https://patch.msgid.link/20260325221618.135833-1-elliotctester1@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The probe function in the psxpad-spi driver calls spi_setup()
but fails to check its return value. If the SPI bus setup fails,
the driver will still load successfully, resulting in potential
error in later I/O operations.
Add a check for the return value of spi_setup() and return
an error on failure.
Fixes: 8be193c7b1 ("Input: add support for PlayStation 1/2 joypads connected via SPI")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A number of modules in the input subsystem use EXPORT_SYMBOL() and
friends without explicitly including the corresponding header
<linux/export.h>. While the build currently succeeds due to this header
being pulled in transitively, this is not guaranteed to be the case in
the future.
Let's add the explicit include to make the dependencies clear and
prevent future build breakage.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=Vo0F
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.
Since dance pads can have both up/down or left/right pressed at the same time,
by design, they are not suitable for mapping the buttons to axes. Historically,
this driver mapped the D-pad to BTN_TRIGGER_HAPPY1-4 in these cases, and before
that as mouse buttons. However, BTN_DPAD_* exists for this and makes far more
sense than the arbitrary mapping it was before.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250702034740.124817-1-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The controller should have been set as XTYPE_XBOX360 and not XTYPE_XBOX.
Also the entry is in the wrong place. Fix it.
Reported-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250708033126.26216-2-niltonperimneto@gmail.com
Fixes: 22c69d786e ("Input: xpad - support Acer NGR 200 Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Not all errors that occur in xpad_try_sending_next_out_packet() are
IO errors. Pass up the error code to the caller so that it can
decide what to do.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250609014718.236827-3-superm1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a device supporting xpad is disconnected it's expected that a
URB will fail to transmit.
Only show an error message when the error isn't -ENODEV.
Fixes: 7fc595f4c0 ("Input: xpad - correctly handle concurrent LED and FF requests")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250609014718.236827-2-superm1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Some Xbox One controllers will only start processing the init packets after
sending the GIP announce packet. While most controllers send this packet
immediately, others will delay for some time, e.g. if a dongle needs to connect
to an actual controller first. In those cases, we want to delay until we
receive the announce packet before sending the init sequence.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250513225411.2718072-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell
Precision M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaCBDmQAKCRBAj56VGEWX
nA13AQCmVOo2PAJU2CtMxqwEVZMat0id/fk0Ro8aiW8JBzyzuwD/as/hMtOkAGyI
pUsaxLp7SlOUMq9YFlkbC/Ffe2GH2QQ=
=yrk/
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
A recent commit put one entry in the wrong place. This just moves it to the
right place.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-5-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This adds support for several new controllers, all of which include
Share buttons:
- HORI Drum controller
- PowerA Fusion Pro 4
- 8BitDo Ultimate 3-mode Controller
- Hyperkin DuchesS Xbox One controller
- PowerA MOGA XP-Ultra controller
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's
Edge Official -- were missing the value of the mapping field, and thus
wouldn't detect properly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com
Fixes: 540602a43a ("Input: xpad - add a few new VID/PID combinations")
Fixes: 3492321e2e ("Input: xpad - add multiple supported devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
