The st_lsm6dsx_set_fifo_odr() function, which is called when enabling and
disabling the hardware FIFO, checks the contents of the hw->settings->batch
array at index sensor->id, and then sets the current ODR value in sensor
registers that depend on whether the register address is set in the above
array element. This logic is valid for internal sensors only, i.e. the
accelerometer and gyroscope; however, since commit c91c1c844e ("iio: imu:
st_lsm6dsx: add i2c embedded controller support"), this function is called
also when configuring the hardware FIFO for external sensors (i.e. sensors
accessed through the sensor hub functionality), which can result in
unrelated device registers being written.
Add a check to the beginning of st_lsm6dsx_set_fifo_odr() so that it does
not touch any registers unless it is called for internal sensors.
Fixes: c91c1c844e ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The adis_init() function dereferences adis->ops to check if the
individual function pointers (write, read, reset) are NULL, but does
not first check if adis->ops itself is NULL.
Drivers like adis16480, adis16490, adis16545 and others do not set
custom ops and rely on adis_init() assigning the defaults. Since struct
adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL
when adis_init() is called, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : adis_init+0xc0/0x118
Call trace:
adis_init+0xc0/0x118
adis16480_probe+0xe0/0x670
Fix this by checking if adis->ops is NULL before dereferencing it,
falling through to assign the default ops in that case.
Fixes: 3b29bcee8f ("iio: imu: adis: Add custom ops struct")
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When the driver probe fails we encounter a regulator put warning
because vddio regulator is not stopped before release. The issue
comes from pm_runtime not already setup when core probe fails and
the vddio regulator disable callback is called.
Fix the issue by setting pm_runtime active early before vddio
regulator resource cleanup. This requires to cut pm_runtime
set_active and enable in 2 function calls.
Fixes: 7ff021a3fa ("iio: imu: inv_icm45600: add new inv_icm45600 driver")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drive bit must be set for open-drain mode and be cleared for push-pull
mode.
Referring to datasheet DS-000576_ICM-45605.pdf section 17.23
INT1_CONFIG2.
Fixes: 06674a72cf ("iio: imu: inv_icm45600: add buffer support in iio devices")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IRQ needs to be acked. for some odd reasons, reading from irq status does
not reliable help, enable acking from any register to be on the safe side
and read the irq status register. Comments in the code indicate a known
unreliability with that register.
The blamed commit was tested with mpu6050 in lg,p895 and lg,p880 according
to Tested-bys. But with the MPU9150 in the Epson Moverio BT-200 this leads
to irq storms without properly acking the irq.
Fixes: 0a3b517c80 ("iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching odr and turning buffer off just afterward, we are
losing the FIFO ODR change flag and ODR switch is blocked.
Fix the issue by force applying any waiting ODR change when turning
buffer off.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching to the same odr value, we end up waiting for a
FIFO ODR flag that is never happening.
Fix the issue by doing nothing and exiting properly when we are
switching to the same ODR value.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Slightly messier than normal unfortunately due to some conflicts
and build config bugs related to I3C drivers.
One last minute Kconfig fix right at the top after a linux-next report.
I've simplified the Kconfig and made it match other instances in the kernel
so that should be safe enough despite short soak time in front of build bots.
Merge of an immutable branch from I3C to get some stubs that were missing
and caused build issues with dual I2C / I3C drivers. This also brought in a
drop of some deprecated interfaces so there is also one patch to update a
new driver to not use those.
We are having another go at using cleanup.h magic with the IIO mode claim
functions after backing out last try at this. This time we have wrappers
around the new ACQUIRE() and ACQUIRE_ERR() macros.
Having been burnt once, we will be taking it a bit more slowly this time
wrt to wide adoption of these! Thanks in particular to Kurt for taking
on this core IIO work.
New Device Support
==================
adi,ad18113
- New driver to support the AD18113 amplifier - an interesting device due
to the external bypass paths where we need to describe what gain those
paths have in DT. Longer term it will be interesting to see if this
simplistic description is enough for real deployments.
adi,ad4062
- New driver for the AD4060 and AD4052 SAR ADCs including trigger, event
and GPIO controller support. Follow up patch replaced use of some
deprecated I3C interfaces prior to the I3C immutable branch merge as
that includes dropping them.
adi,ad4134
- New driver for the AD4134 24bit 4 channel simultaneous sampling ADC.
adi,ad7768-1,
- Add support for the ADAQ767-1, ADAQ7768-1 and ADAQ7769-1 ADCs after some
rework to enable the driver to support multiple device types.
adi,ad9467
- Add support for the similar ad9211 ADC to this existing driver.
- Make the selection of 2s comp mode explicit for normal operation and
switch to offset binary when entering calibration mode.
honeywell,abp2
- New driver to support this huge family (100+) of board mount pressure and
temperature sensors.
maxim,max22007
- New drier for this 4 channel DAC.
memsic,mmc5633
- New driver for this I2C/I3C magnetometer. Follow on patches fixed up
issues related to single driver supporting both bus types.
microchip,mcp747feb02
- New driver for the Microchip MCP47F(E/V)B(0/1/2)1,
MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8
buffered voltage output DACs.
nxp,sar-adc
- New driver support ADCs found on s32g2 and s32g3 platforms.
ti,ads1018
- New drier for the ADS1018 and ADS1118 SPI ADCs.
ti,ads131m02
- New driver supporting ADS131M(02/03/04/06/08)24-bit simultaneous sampling
ADCs.
Features
========
iio-core
- New IIO_DEV_ACQUIRE_DIRECT_MODE() / IIO_DEV_ACQUIRE_FAILED() +
equivalents for the much rarer case where the mode needs pinning
whether or not it is in direct mode. These use the ACQUIRE()
/ ACQUIRE_ERR() infrastructure underneath to provide both simple
checks on whether we got the requested mode and to provide scope
based release. Applied in a few initial drivers.
adi,ad9467
- Support calibbias control
adi,adf4377
- Add support to act as a clock provider.
adi,adxl380
- Support low power 1KHz sampling frequency mode. Required rework of
how events and filters were configured, plus applying of constraints
when in this mode.
rf-digital,rfd77402
- Add interrupt support as alternative to polling for completion.
st,lsm6dsx
- Tap event detection (after considerable driver rework)
Cleanup and Minor Fixes
=======================
More minor cleanup such as typos, white space etc not called out except
where they were applied to a lot of drivers.
Various drivers.
- Use of dev_err_probe() to cleanup error handling.
- Introduce local struct device and struct device_node variables to
reduce duplication of getting them from containing structs.
- Ensure uses of iio_trigger_generic_data_rdy_poll() set IRQF_NO_THREAD
as that function calls non threaded child interrupt handlers.
- Replace IRQF_ONESHOT in not thread interrupt handlers with
IRQF_NO_THREAD to ensure they run as intended. Drop one unnecessary case.
iio-sw-device/trigger.
- Constify configs_group_operations structures.
iio-buffer-dma / buffer-dma-engine
- Use lockdep_assert_held() to replace WARN_ON() to check lock is
correctly held.
- Make use of cleanup.h magic to simplify various code paths.
- Make iio_dma_buffer_init() return void rather than always success.
adi,ad7766
- Replace custom interrupt handler with iio_trigger_generic_data_rdy_poll()
adi,ad9832
- Drop legacy platform_data support.
adi,ade9000
- Add a maintainer entry.
adi,adt7316
- Move to EXPORT_GPL_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() so the compiler
can cleanly drop unused pm structures and callbacks.
adi,adxl345
- Relax build constraint vs the driver that is in input so both may be
built as modules and selection made at runtime.
adi,adxl380
- Make sure we don't read tail entries in the hardware fifo if a partial
new scan has been written.
- Move to a single larger regmap_noinc_read() to read the hardware fifo.
aspeed,ast2600
- Add missing interrupts property to DT binding.
bosch,bmi270_i2c
- Add missing MODULE_DEVICE_TABLE() macros so auto probing of modules can
work.
bosch,smi330
- Drop duplicate assignment of IIO_TYPE in smi330_read_avail()
- Use new common field_get() and field_prep() helpers to replace local
version.
honeywell,mprls0025pa
Fixes delayed to merge window as late in cycle and we didn't want to delay
the rest of the series.
- Allow Kconfig selection of specific bus sub-drivers rather than tying that
to the buses themselves being supported.
- Zero spi_transfer structure to avoid chance of unintentionally set fields
effecting transfer.
- Fix a potential timing violation wrt to the chip select to first clock
edge timing.
- As recent driver, take risk inherent in dropping interrupt direction from
driver as that should be set by firmware.
- Fix wrong reported number of data bits for channel.
- Fix a pressure channel calculation bug.
- Rework to allow embedding the tx buffer in the iio_priv() structure rather
than requiring separate allocation.
- Move the buffer clearing to the shared core bringing it into affect for
SPI as well as I2C.
- Stricter checks for status byte.
- Greatly simplify the measurement sequence.
- Add a copyright entry to reflect Petre's continued work on this driver.
intersil,isl29018
- Switch from spritnf to sysfs_emit_at() to make it clear overflow can't
occur.
invensense,icm42600
- Allow sysfs access to temperature when buffered capture in use as it
does not impact other sensor data paths.
invensense,itg3200
- Check unused return value in read_raw() callback.
men,z188
- Drop now duplicated module alias.
rf-digital,rfd77402
- Add DT binding doc and explicit of_device_id table.
- Poll for timeout with times as on datasheet, then replace opencoded
version with read_poll_timeout().
sensiron,scd4x
- Add missing timestamp channel. The code to push it to the buffer was there
but there was no way to turn it on.
vti,sca3000
- Fix resource leak if iio_device_register() fails.
-----BEGIN PGP SIGNATURE-----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=2IKe
-----END PGP SIGNATURE-----
Merge tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for the 6.20/7.0 cycle.
Slightly messier than normal unfortunately due to some conflicts
and build config bugs related to I3C drivers.
One last minute Kconfig fix right at the top after a linux-next report.
I've simplified the Kconfig and made it match other instances in the kernel
so that should be safe enough despite short soak time in front of build bots.
Merge of an immutable branch from I3C to get some stubs that were missing
and caused build issues with dual I2C / I3C drivers. This also brought in a
drop of some deprecated interfaces so there is also one patch to update a
new driver to not use those.
We are having another go at using cleanup.h magic with the IIO mode claim
functions after backing out last try at this. This time we have wrappers
around the new ACQUIRE() and ACQUIRE_ERR() macros.
Having been burnt once, we will be taking it a bit more slowly this time
wrt to wide adoption of these! Thanks in particular to Kurt for taking
on this core IIO work.
New Device Support
==================
adi,ad18113
- New driver to support the AD18113 amplifier - an interesting device due
to the external bypass paths where we need to describe what gain those
paths have in DT. Longer term it will be interesting to see if this
simplistic description is enough for real deployments.
adi,ad4062
- New driver for the AD4060 and AD4052 SAR ADCs including trigger, event
and GPIO controller support. Follow up patch replaced use of some
deprecated I3C interfaces prior to the I3C immutable branch merge as
that includes dropping them.
adi,ad4134
- New driver for the AD4134 24bit 4 channel simultaneous sampling ADC.
adi,ad7768-1,
- Add support for the ADAQ767-1, ADAQ7768-1 and ADAQ7769-1 ADCs after some
rework to enable the driver to support multiple device types.
adi,ad9467
- Add support for the similar ad9211 ADC to this existing driver.
- Make the selection of 2s comp mode explicit for normal operation and
switch to offset binary when entering calibration mode.
honeywell,abp2
- New driver to support this huge family (100+) of board mount pressure and
temperature sensors.
maxim,max22007
- New drier for this 4 channel DAC.
memsic,mmc5633
- New driver for this I2C/I3C magnetometer. Follow on patches fixed up
issues related to single driver supporting both bus types.
microchip,mcp747feb02
- New driver for the Microchip MCP47F(E/V)B(0/1/2)1,
MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8
buffered voltage output DACs.
nxp,sar-adc
- New driver support ADCs found on s32g2 and s32g3 platforms.
ti,ads1018
- New drier for the ADS1018 and ADS1118 SPI ADCs.
ti,ads131m02
- New driver supporting ADS131M(02/03/04/06/08)24-bit simultaneous sampling
ADCs.
Features
========
iio-core
- New IIO_DEV_ACQUIRE_DIRECT_MODE() / IIO_DEV_ACQUIRE_FAILED() +
equivalents for the much rarer case where the mode needs pinning
whether or not it is in direct mode. These use the ACQUIRE()
/ ACQUIRE_ERR() infrastructure underneath to provide both simple
checks on whether we got the requested mode and to provide scope
based release. Applied in a few initial drivers.
adi,ad9467
- Support calibbias control
adi,adf4377
- Add support to act as a clock provider.
adi,adxl380
- Support low power 1KHz sampling frequency mode. Required rework of
how events and filters were configured, plus applying of constraints
when in this mode.
rf-digital,rfd77402
- Add interrupt support as alternative to polling for completion.
st,lsm6dsx
- Tap event detection (after considerable driver rework)
Cleanup and Minor Fixes
=======================
More minor cleanup such as typos, white space etc not called out except
where they were applied to a lot of drivers.
Various drivers.
- Use of dev_err_probe() to cleanup error handling.
- Introduce local struct device and struct device_node variables to
reduce duplication of getting them from containing structs.
- Ensure uses of iio_trigger_generic_data_rdy_poll() set IRQF_NO_THREAD
as that function calls non threaded child interrupt handlers.
- Replace IRQF_ONESHOT in not thread interrupt handlers with
IRQF_NO_THREAD to ensure they run as intended. Drop one unnecessary case.
iio-sw-device/trigger.
- Constify configs_group_operations structures.
iio-buffer-dma / buffer-dma-engine
- Use lockdep_assert_held() to replace WARN_ON() to check lock is
correctly held.
- Make use of cleanup.h magic to simplify various code paths.
- Make iio_dma_buffer_init() return void rather than always success.
adi,ad7766
- Replace custom interrupt handler with iio_trigger_generic_data_rdy_poll()
adi,ad9832
- Drop legacy platform_data support.
adi,ade9000
- Add a maintainer entry.
adi,adt7316
- Move to EXPORT_GPL_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() so the compiler
can cleanly drop unused pm structures and callbacks.
adi,adxl345
- Relax build constraint vs the driver that is in input so both may be
built as modules and selection made at runtime.
adi,adxl380
- Make sure we don't read tail entries in the hardware fifo if a partial
new scan has been written.
- Move to a single larger regmap_noinc_read() to read the hardware fifo.
aspeed,ast2600
- Add missing interrupts property to DT binding.
bosch,bmi270_i2c
- Add missing MODULE_DEVICE_TABLE() macros so auto probing of modules can
work.
bosch,smi330
- Drop duplicate assignment of IIO_TYPE in smi330_read_avail()
- Use new common field_get() and field_prep() helpers to replace local
version.
honeywell,mprls0025pa
Fixes delayed to merge window as late in cycle and we didn't want to delay
the rest of the series.
- Allow Kconfig selection of specific bus sub-drivers rather than tying that
to the buses themselves being supported.
- Zero spi_transfer structure to avoid chance of unintentionally set fields
effecting transfer.
- Fix a potential timing violation wrt to the chip select to first clock
edge timing.
- As recent driver, take risk inherent in dropping interrupt direction from
driver as that should be set by firmware.
- Fix wrong reported number of data bits for channel.
- Fix a pressure channel calculation bug.
- Rework to allow embedding the tx buffer in the iio_priv() structure rather
than requiring separate allocation.
- Move the buffer clearing to the shared core bringing it into affect for
SPI as well as I2C.
- Stricter checks for status byte.
- Greatly simplify the measurement sequence.
- Add a copyright entry to reflect Petre's continued work on this driver.
intersil,isl29018
- Switch from spritnf to sysfs_emit_at() to make it clear overflow can't
occur.
invensense,icm42600
- Allow sysfs access to temperature when buffered capture in use as it
does not impact other sensor data paths.
invensense,itg3200
- Check unused return value in read_raw() callback.
men,z188
- Drop now duplicated module alias.
rf-digital,rfd77402
- Add DT binding doc and explicit of_device_id table.
- Poll for timeout with times as on datasheet, then replace opencoded
version with read_poll_timeout().
sensiron,scd4x
- Add missing timestamp channel. The code to push it to the buffer was there
but there was no way to turn it on.
vti,sca3000
- Fix resource leak if iio_device_register() fails.
* tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (144 commits)
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
iio: Replace IRQF_ONESHOT with IRQF_NO_THREAD
iio: Use IRQF_NO_THREAD
iio: dac: Add MAX22007 DAC driver support
dt-bindings: iio: dac: Add max22007
...
Drop the driver-specific smi330_field_get() and smi330_field_prep()
macros, in favor of the globally available variants from
<linux/bitfield.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently BMI260 & BMI270 devices do not automatically load this
driver. To fix this, add missing MODULE_DEVICE_TABLE for the i2c,
acpi, and of device tables so the driver will load when the hardware
is detected.
Tested on my OneXPlayer F1 Pro.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Delete iio_device_claim_direct_mode() when reading temperature.
It enables polling of temperature data while buffer is on and it
doesn't have any impact on the other sensors.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Correct temperature computation is (raw + offset) * scale and not
apply scale and offset afterward.
Fix temperature offset reporting to the correct value and update
commentaries for the new computation.
Fixes: 27e072bc34 ("iio: imu: inv_icm45600: add IMU IIO gyroscope device")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the IIO_CHAN_INFO_OVERSAMPLING_RATIO case, the type parameter
is assigned from smi330_average_attr.type and then immediately
overwritten with IIO_VAL_INT on the next line.
Since smi330_average_attr.type is already initialized to IIO_VAL_INT,
the second assignment is redundant. Remove the hardcoded assignment
to maintain consistency in the code.
Signed-off-by: Massimiliano Pellizzer <mpellizzer.dev@gmail.com>
Reviewed-by: Jianping Shen <Jianping.Shen@de.bosch.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In order to allow sensors to advertise tap event capability and report tap
events, define a new struct iio_event_spec array that includes a tap event
spec, and a new struct iio_chan_spec array that references the new
iio_event_spec array; for the LSM6DSV chip family, use the new
iio_chan_spec array and define an event source for tap events.
Tested on LSMDSV16X.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In preparation for adding support for more event sources, add to the
ST_LSM6DSX_CHANNEL_ACC() iio_chan_spec initializer macro an iio_event_spec
array argument, so that this macro can be used with different arrays by
sensors that support different event sources; change the st_lsm6dsx_event
struct declaration to an array (renamed as st_lsm6dsx_ev_motion) so that it
can be passed to the macro (and opportunistically move it from the header
file where it does not belong to the C file where it is used).
In addition, remove from this macro the channel type parameter and
hard-code IIO_ACCEL in the macro definition, since all callers use
IIO_ACCEL as channel type argument.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st_lsm6dsx_acc_channels array of struct iio_chan_spec has a non-NULL
event_spec field, indicating support for IIO events. However, event
detection is not supported for all sensors, and if userspace tries to
configure accelerometer wakeup events on a sensor device that does not
support them (e.g. LSM6DS0), st_lsm6dsx_write_event() dereferences a NULL
pointer when trying to write to the wakeup register.
Define an additional struct iio_chan_spec array whose members have a NULL
event_spec field, and use this array instead of st_lsm6dsx_acc_channels for
sensors without event detection capability.
Fixes: b5969abfa8 ("iio: imu: st_lsm6dsx: add motion events")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In order to be able to configure event detection on a per axis
basis (for either setting an event threshold/sensitivity value, or
enabling/disabling event detection), add new axis-specific fields
to struct st_lsm6dsx_event_src, and modify the logic that handles
event configuration to properly handle axis-specific settings when
supported by a given event source.
A future commit will add actual event sources with per-axis
configurability.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In preparation for adding support for more event types, use an array
indexed by event ID instead of a scalar value to store enabled events, and
refactor the functions to configure and report events so that their
implementation is not specific for wakeup events. Move the logic to update
the global event interrupt enable flag from st_lsm6dsx_event_setup() to its
calling function, so that it can take into account also event sources
different from the source being configured. While changing the signature of
the st_lsm6dsx_event_setup() function, opportunistically add the currently
unused `axis` parameter, which will be used when adding support for
enabling and disabling events on a per axis basis.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This field is used to store the wakeup event detection threshold value.
When adding support for more event types, some of which may have different
threshold values for different axes, storing all threshold values for all
event sources would be cumbersome. Thus, remove this field altogether, and
read the currently configured value from the sensor when requested by
userspace.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The enable_event field in struct st_lsm6dsx_hw does not lend itself well to
handling multiple event sources, so it will have to be modified to add
support for more event sources. As a preparatory step, remove references to
this field from code that does not deal with event management; rework the
st_lsm6dsx_check_events() function so that it returns whether any events
are currently enabled on a given sensor.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The mask value being assigned to the irq1_func and irq2_func fields of the
irq_config struct is specific to a single event source (i.e. the wakeup
event), and as such it should be separate from the definition of the
interrupt function registers, which cover multiple event sources.
In preparation for adding support for more event types, change the
irq1_func and irq2_func type from an {address, mask} pair to an address,
and move the mask value to a new field of struct st_lsm6dsx_event_src. No
functional changes.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st_lsm6dsx_event_settings structure contains fields specific for one
event type (wakeup). In preparation for adding support for more event
types, introduce an event id enum and a generic event source structure, and
replace wakeup-specific data in struct st_lsm6dsx_event_settings with an
array of event source structures.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions.
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now, with no reported
issues other than a merge conflict with your tree that should be trivial
to handle (take both sides).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTNDQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykVIACeN0AiTosAtp4CAGe4fAwM7EvbnkQAoNJE5NAx
Ef31/j1Tq2pCTWt6SVbs
=AY/e
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
The sleep variable in inv_icm45600_buffer_postdisable() could be used without
being assigned in case of error. It must be initialized to 0 by default.
Fixes: 06674a72cf ("iio: imu: inv_icm45600: add buffer support in iio devices")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-iio/aPi6Xw-ZoUkW76zR@stanley.mountain/
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The bmi270 can be connected to I2C or a SPI interface. If it is a SPI,
during probe, if devm_regmap_init() fails, it should print the "spi"
term rather "i2c".
Fixes: 92cc50a005 ("iio: imu: bmi270: Add spi driver for bmi270 imu")
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The intention here was clearly to return -ENODEV but the return statement
was missing. It would result in an off by one read in i3c_chip_info[] on
the next line. Add the return statement.
Fixes: 1bef24e900 ("iio: imu: inv_icm45600: add I3C driver for inv_icm45600 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the iio driver for bosch imu smi330. The smi330 is a combined
three axis angular rate and three axis acceleration sensor.
Signed-off-by: Jianping Shen <Jianping.Shen@de.bosch.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The calibrated timestamp is calculated from the nominal value using the
formula:
ts_gain[ns] ≈ ts_sensitivity - (ts_trim_coeff * val) / 1000.
The values of ts_sensitivity and ts_trim_coeff are not the same for all
devices, so it is necessary to differentiate them based on the part name.
For the correct values please consult the relevant AN.
Fixes: cb3b6b8e1b ("iio: imu: st_lsm6dsx: add odr calibration feature")
Signed-off-by: Mario Tesi <mario.tesi@st.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The rate at which accelerometer or gyroscope sensor samples are fed
to the hardware FIFO (batch data rate, or BDR) does not have to
coincide with the sensor sampling frequency (output data rate, or
ODR); the only requirement is for the BDR to not be greater than
the ODR. Having a BDR lower than the ODR is useful in cases where
an application requires a high sampling rate for accurate detection
of motion events (e.g. wakeup events), but wants to read sensor
sample values from the hardware FIFO at a lower data rate (e.g. to
minimize the amount of I2C or SPI traffic and the rate of periodic
interrupts).
To support the above use case, add a sampling_frequency sysfs
attribute to the buffer directory of st_lsm6dsx IIO devices, which
controls the BDR for a given sensor independently from the "main"
sampling_frequency attribute (which controls the ODR); introduce a
new `hwfifo_odr_mHz` field in struct st_lsm6dsx_sensor to keep
track of the current BDR value, and use this field instead of the
`odr` field in the code that deals with the FIFO data rate. In the
sensor hub driver, make the hwfifo_odr_mHz value always mirror the
odr value, since there is no separate configuration setting to
control the BDR for data produced by the sensor hub functionality.
For backwards compatibility, set the buffer frequency equal to the
main frequency whenever the latter is updated via sysfs; if
userspace wants a different buffer frequency, it has to write to
the relevant sysfs attribute after any writes to the main frequency
attribute.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The `odr` field in struct st_lsm6dsx_sensor contains a data rate
value expressed in mHz, not in Hz.
Fixes: f8710f0357 ("iio: imu: st_lsm6dsx: express odr in mHZ")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add IIO device for accelerometer sensor
with data polling interface and FIFO parsing.
Attributes: raw, scale, sampling_frequency, calibbias.
Temperature is available as a processed channel.
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add IIO device for gyroscope sensor
with data polling interface and FIFO parsing.
Attributes: raw, scale, sampling_frequency, calibbias.
Temperature is available as a processed channel.
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add FIFO control functions.
Support hwfifo watermark by multiplexing gyro and accel settings.
Support hwfifo flush.
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Core component of a new driver for InvenSense ICM-45600 devices.
It includes registers definition, main probe/setup, and device
utility functions.
ICM-456xx devices are latest generation of 6-axis IMU,
gyroscope+accelerometer and temperature sensor. This device
includes a 8K FIFO, supports I2C/I3C/SPI, and provides
intelligent motion features like pedometer, tilt detection,
and tap detection.
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Any-motion event can be enabled on a per-axis basis and triggers a
combined event when motion is detected on any axis.
No-motion event is triggered if the rate of change on all axes falls
below a specified threshold for a configurable duration. A fake channel
is used to report this event.
Threshold and duration can be configured from userspace.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The `decimator` and `batch` fields of struct st_lsm6dsx_settings
are arrays indexed by sensor type, not by sensor hardware
identifier; moreover, the `batch` field is only used for the
accelerometer and gyroscope.
Change the array size for `decimator` from ST_LSM6DSX_MAX_ID to
ST_LSM6DSX_ID_MAX, and change the array size for `batch` from
ST_LSM6DSX_MAX_ID to 2; move the enum st_lsm6dsx_sensor_id
definition so that the ST_LSM6DSX_ID_MAX value is usable within
the struct st_lsm6dsx_settings definition.
Fixes: 801a6e0af0 ("iio: imu: st_lsm6dsx: add support to LSM6DSO")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace explicit mutex_lock() and mutex_unlock() with the guard() macro
for cleaner and safer mutex handling.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The vdd regulator is not used for runtime power management, so it does
not need explicit enable/disable handling.
Use devm_regulator_get_enable() to let the regulator be managed
automatically by devm.
This simplifies the code by removing the manual enable and cleanup
logic.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-4-ef1336246960@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Do as in suspend, skip resume configuration steps if the device is already
pm_runtime suspended. This avoids reconfiguring a device that is already
in the correct low-power state and ensures that pm_runtime handles the
power state transitions properly.
Fixes: 31c24c1e93 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-3-ef1336246960@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unnecessary calls to pm_runtime_disable(), pm_runtime_set_active(),
and pm_runtime_enable() from the resume path. These operations are not
required here and can interfere with proper pm_runtime state handling,
especially when resuming from a pm_runtime suspended state.
Fixes: 31c24c1e93 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-2-ef1336246960@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rework the power management in inv_icm42600_core_probe() to use
devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM
setup by handling activation and enabling in one step.
Remove the separate inv_icm42600_disable_pm callback, as it's no longer
needed with the devm-managed approach.
Using devm_pm_runtime_enable() also fixes the missing disable of
autosuspend.
Update inv_icm42600_disable_vddio_reg() to only disable the regulator if
the device is not suspended i.e. powered-down, preventing unbalanced
disables.
Also remove redundant error msg on regulator_disable(), the regulator
framework already emits an error message when regulator_disable() fails.
This simplifies the PM setup and avoids manipulating the usage counter
unnecessarily.
Fixes: 31c24c1e93 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250825135401.1765847-8-sakari.ailus@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
GPD devices originally used BMI160 sensors with the "BMI0160" PNP ID.
When they switched to BMI260 sensors in newer hardware, they reused
the existing Windows driver which accepts both "BMI0160" and "BMI0260"
IDs. Consequently, they kept "BMI0160" in DSDT tables for new BMI260
devices, causing driver mismatches in Linux.
1. GPD updated BIOS v0.40+[1] for newer devices to report "BMI0260" for
BMI260 sensors to avoid loading the bmi160 driver on Linux. While this
isn't Bosch's VID;
2. Bosch's official Windows driver uses "BMI0260" as a compatible ID
3. We're seeing real devices shipping with "BMI0260" in DSDT
The DSDT excerpt of GPD G1619-04 with BIOS v0.40:
Scope (_SB.I2CC)
{
Device (BMA2)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "BMI0260") // _HID: Hardware ID
Name (_CID, "BMI0260") // _CID: Compatible ID
Name (_DDN, "Accelerometer") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x0069, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CC",
0x00, ResourceConsumer, , Exclusive,
)
})
Return (RBUF) /* \_SB_.I2CC.BMA2._CRS.RBUF */
}
# omit some noise
}
}
Link: http://download.softwincn.com/WIN%20Max%202024/Max2-7840-BIOS-V0.41.zip#1
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patch.msgid.link/20250821-bmi270-gpd-acpi-v4-1-5279b471d749@uniontech.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dev_err_probe() doesn't do anything when the error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just return the
value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250821080723.525379-5-zhao.xichao@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use min() to reduce code in inv_icm42600_buffer_update_fifo_period()
and inv_icm42600_buffer_update_watermark(), and improve readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250816120510.355835-1-rongqianfeng@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Update the sysfs interface for sampling frequency and scale attributes.
Replace `scnprintf()` with `sysfs_emit_at()` which is PAGE_SIZE-aware
and recommended for use in sysfs.
Signed-off-by: Akshay Bansod <akbansd@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250811165641.1214347-1-akbansd@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Temperature sensor returns the temperature of the mechanical parts
of the chip. If both accel and gyro are off, the temperature sensor is
also automatically turned off and returns invalid data.
In this case, returning -EBUSY error code is better then -EINVAL and
indicates userspace that it needs to retry reading temperature in
another context.
Fixes: bc3eb0207f ("iio: imu: inv_icm42600: add temperature sensor support")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250808-inv-icm42600-change-temperature-error-code-v1-1-986fbf63b77d@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- DEBUGFS
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
- SYSFS
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
- Support cache-ids for device-tree systems
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
- Rust
- Device
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
- Misc
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
=jgRj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Add const qualifier to struct bno055_sysfs_attr and its array fields.
All of this is read-only data so it can be made const.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250709-iio-const-data-19-v2-2-fb3fc9191251@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix a potential out-of-bounds array access of the hw_xlate array in
bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the
vals array instead of the length of the hw_xlate array. In the case of
bno055_gyr_scale, the vals array is larger than the hw_xlate array,
so this could result in an out-of-bounds access. In practice, this
shouldn't happen though because a match should always be found which
breaks out of the for loop before it iterates beyond the end of the
hw_xlate array.
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be
sure we are iterating over the correct length.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507100510.rGt1YOOx-lkp@intel.com/
Fixes: 4aefe1c2bd ("iio: imu: add Bosch Sensortec BNO055 core driver")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250709-iio-const-data-19-v2-1-fb3fc9191251@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move all DMA aligned buffers together at the end of the structure.
1. Timestamp anynomous structure is not used with DMA so it doesn't
belong after __aligned(IIO_DMA_MINALIGN).
2. struct inv_icm42600_fifo contains it's own __aligned(IIO_DMA_MINALIGN)
within it at the end so it should not be after __aligned(IIO_DMA_MINALIGN)
in the outer struct either.
3. Normally 1 would have been considered a bug, but because of the extra
alignment from 2, it actually was OK, but we shouldn't be relying on such
quirks.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-1-5bb0c84800d9@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formating the value to be
returned to user space. So replace scnprintf() with sysfs_emit().
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250701154720.54276-1-chelsyratnawat2001@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change the adis16400 driver to use individual chip info structures
instead of an array. This reduces the verbosity of the code. Also, the
data is now const as it should have been in the first place.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250628-iio-const-data-17-v1-1-a215ebb653ec@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for generating events when the step counter reaches the
configurable watermark.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Link: https://patch.msgid.link/20250616-bmi270-events-v3-2-16e37588604f@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a channel for enabling/disabling the step counter, reading the
number of steps and resetting the counter.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Link: https://patch.msgid.link/20250616-bmi270-events-v3-1-16e37588604f@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver code is full of intXX_t and uintXX_t types which is
not the pattern we use in the IIO subsystem. Switch the driver
to use kernel internal types for that. No functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250616090423.575736-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20250611085838.4761-8-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250611085838.4761-7-chuguangqing@inspur.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is really no reason for having the IRQ name as a macro definition
if it is only used once (often in functions requesting the IRQ). It
is also more readable this way. Remove these macro definitions and
instead use the string literal directly.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/3dc06cb2a83d292c50d9758643aad37ca5c6d95c.1748356671.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is really no reason for having the driver name as a macro
definition if it is only used once (often as `.name` in `struct
device_driver`). It is also more readable this way. Remove these macro
definitions and instead use the string literal directly.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/4840779a167e027b8be77c82f7a4f27210ef084a.1748356671.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactors inv_mpu_aux_read() and inv_mpu_aux_write() to extract the common
I2C transfer sequence into inv_mpu_i2c_master_xfer(), which now handles
starting and stopping the I2C master, waiting for completion, disabling
SLV0, and checking for NACK errors.
This refactoring removes code duplication and improves maintainability.
No functional changes are intended.
Signed-off-by: Isabella Caselli <bellacaselli20@gmail.com>
Co-developed-by: Rodrigo Michelassi <rodrigo.michelassi@usp.br>
Signed-off-by: Rodrigo Michelassi <rodrigo.michelassi@usp.br>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250507184539.54658-1-bellacaselli20@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Note - last minute rebase was to drop a typo patch that I'd accidentally
picked up (in the microblaze arch Kconfig)
Take 2 is due to that rebase messing up some fixes tags that were
referring to patches after that point.
There is a known merge conflict due to changes in neighbouring lines.
Stephen's resolution in linux-next is:
https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/
Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those
who have been doing much of this work for some time. Lars-Peter is
removed from the entry having moved on to other topics. Thanks
Nuno, David and Andy for stepping up and Lars-Peter for all your
hard work in the past!
Includes the usual mix of new device support, features and general
cleanup.
This time we also have some tree wide changes.
- Rip out the iio_device_claim_direct_scoped() as it proved hard to work
with. This series includes quite a few related cleanups such as use
of guard or factoring code out to allow direct returns.
- Switch from iio_device_claim/release_direct_mode() to new
iio_device_claim/release_direct() which is structured so that sparse
can warn on failed releases. There were a few false positives but
those were mostly in code that benefited from being cleaned up as part
of this process.
- Introduce iio_push_to_buffers_with_ts() to replace the _timestamp()
version over time. This version takes the size of the supplied buffer
which the core checks is at least as big as expected by calculation
from channel descriptions of those channels enabled. Use this in
an initial set of drivers.
- Add macros for IIO_DECLARE_BUFFER_WITH_TS() and
IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure
correctly aligned buffers for timestamps being added onto the end of
channel data.
New device support
------------------
adi,ad3530r
- New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with
programmable gain controls. R variants have internal references.
adi,ad7476
- Add support (dt compatible only) for the Rohm BU79100G ADC which is
fully compatible with the ti,ads7866.
adi,ad7606
- Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic
channel information allocation.
adi,ad7380
- Add support for the AD7389-4
dfrobot,sen0322
- New driver for this oxygen sensor.
mediatek,mt2701-auxadc
- Add binding for MT6893 which is fully compatible with already supported
MT8173.
meson-saradc
- Support the GXLX SoCs. Mostly this is a workaround for some unrelated
clock control bits found in the ADC register map.
nuvoton,nct7201
- New driver for NCT7201 and NCT7202 I2C ADCs.
rohm,bd79124
- New driver for this 12-bit, 8-channel SAR ADC.
- Switch to new set_rv etc gpio callbacks that were added in 6.15.
rohm,bd79703
- Add support for BD79700, BD79701 and BD79702 DACs that have subsets of
functionality of the already supported bd79703. Included making this
driver suitable for support device variants.
st,stm32-lptimer
- Add support for stm32pm25 to this trigger.
Features
--------
Beyond IIO
- Property iterator for named children.
core
- Enable writes for 64 bit integers used for standard IIO ABI elements.
Previously these could be read only.
- Helper library that should avoid code duplication for simpler ADC
bindings that have a child node per channel.
- Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true
and simplifies code on all significant architectures)
core/backend
- Add support to control source of data - useful when the HDL includes
things like generated ramps for testing purposes. Enable this for
adi-axi-dac
adi,ad3552-hs
- Add debugfs related callbacks to allow debug access to register contents.
adi,ad4000
- Support SPI offload with appropriate FPGA firmware along with improving
documentation.
adi,ad7293
- Add support for external reference voltage.
adi,ad7606
- Support SPI offload.
adi,ad7768-1
- Support reset GPIO.
adi,admv8818
- Support filter frequencies beyond 2^32.
adi,adxl345
- Add single and double tap events.
hid-sensor-prox
- Support 16-bit report sizes as seen on some Intel platforms.
invensense,icm42600
- Enable use of named interrupts to avoid problems with some wiring choices.
Get the interrupt by name, but fallback to previous assumption on the first
being INT1 if no names are supplied.
microchip,mcp3911
- Add reset gpio support.
rohm,bh7150
- Add reset gpio support.
st,stm32
- Add support to control oversampling.
ti,adc128s052
- Add support for ROHM BD79104 which is early compatible with the TI
parts already supported by this driver. Includes some general driver
cleanup and a separate dt binding.
- Simplify reference voltage handling by assuming it is fixed after enabling
the supply.
winsen,mhz19b
- New driver for this C02 sensor.
Cleanup and minor fixes
-----------------------
dt-bindings
- Correct indentation and style for DTS examples.
- Use unevalutateProperties for SPI devices instead of additionalProperties
to allow generic SPI properties from spi-peripheral-props.yaml
ABI Docs
- Add missing docs for sampling_frequency when it applies only to events.
Treewide
- Various minor tweaks, comment fixes and similar.
- Sort TI ADCs in Kconfig that had gotten out of order.
- Switch various drives that provide GPIO chip functionality to the new
callbacks with return values.
- Standardize on { } formatting for all array sentinels.
- Make use of aligned_s64 in a few places to replace either wrong types
or manually defined equivalents.
- Drop places where spi bits_per_word is set to 8 because that is the
default anyway.
adi,ad_sigma_delta library
- Avoid a potential use of uninitialized data if reg_size has a value
that is not supported (no drivers hit this but it is reasonable hardening)
adi,ad4030
- Add error checking for scan types and no longer store it in state.
- Rework code to reduce duplication.
- Move setting the mode from buffer preenable() to update_scan_mode(),
better matching expected semantics of the two different callbacks.
- Improve data marshalling comments.
adi,ad4695
- Use u16 for buffer elements as oversampling is not yet supported except
with SPI offload (which doesn't use this path).
adi,ad5592r
- Clean up destruction of mutexes.
- Use lock guards to simplify code (later patch fixes a missed unlock)
adi,ad5933
- Correct some incorrect settling times.
adi,ad7091
- Deduplicate handling of writable vs volatile registers as they are the
inverse of each other for this device.
adi,ad7124
- Fix 3db Filter frequency.
- Remove ability to directly write the filter frequency (which was broken)
- Register naming improvements.
adi,ad7606
- Add a missing return value check.
- Fill in max sampling rates for all chips.
- Use devm_mutex_init()
- Fix up some kernel-doc formatting issues.
- Remove some camel case that snuck in.
- Drop setting address field in channels as easily established from other
fields.
- Drop unnecessary parameter to ad76060_scale_setup_cb_t.
adi,ad7768-1
- Convert to regmap.
- Factor out buffer allocation.
- Tidy up headers.
adi,ad7944
- Stop setting bits_per_word in SPI xfers with no data.
adi,ad9832
- Add of_device_id table rather than just relying on fallbacks.
- Use FIELD_PREP() to set values of fields.
adi,admv1013
- Cleanup a pointless ternary.
adi,admv8818
- Fix up LPF Band 5 frequency which was slightly wrong.
- Fix an integer overflow.
- Fix range calculation
adi,adt7316
- Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler
irq_get_trigger_type()
adi,adxl345
- Use regmap cache instead of various state variables that were there to
reduce bus accesses.
- Make regmap return value checking consistent across all call sites.
adi,axi-dac
- Add a check on number of channels (0 to 15 valid)
allwinner,sun20i
- Use new adc-helpers to replace local parsing code for channel nodes.
bosch,bmp290
- Move to local variables for sensor data marshalling removing the need
for a messy definition that has to work for all supported parts.
Follow up fix adds a missing initialization.
dynaimage,al3010 and dynaimage,al3320a
- Various minor cleanup to bring these drivers inline with reviewed feedback
given on a new driver.
- Fix an error path in which power down is not called when it should be.
- Switch to regmap.
google,cros_ec
- Fix up a flexible array in middle of structure warning.
- Flush fifo when changing the timeout to avoid potential long wait
for samples.
hid-sensor-rotation
- Remove an __aligned(16) marking that doesn't seem to be justified.
kionix,kxcjk-1013
- Deduplicate code for setting up interrupts.
microchip,mcp3911
- Fix handling of conversion results register which differs across supported
devices.
idt,zopt2201
- Avoid duplicating register lists as all volatile registers are the
inverse of writeable registers on this device.
renesas,rzg2l
- Use new adc-helpers to replace local parsing code for channel nodes.
ti,ads1298
- Fix a missing Kconfig dependency.
-----BEGIN PGP SIGNATURE-----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=vLKV
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for 6.16 - take 2
Note - last minute rebase was to drop a typo patch that I'd accidentally
picked up (in the microblaze arch Kconfig)
Take 2 is due to that rebase messing up some fixes tags that were
referring to patches after that point.
There is a known merge conflict due to changes in neighbouring lines.
Stephen's resolution in linux-next is:
https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/
Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those
who have been doing much of this work for some time. Lars-Peter is
removed from the entry having moved on to other topics. Thanks
Nuno, David and Andy for stepping up and Lars-Peter for all your
hard work in the past!
Includes the usual mix of new device support, features and general
cleanup.
This time we also have some tree wide changes.
- Rip out the iio_device_claim_direct_scoped() as it proved hard to work
with. This series includes quite a few related cleanups such as use
of guard or factoring code out to allow direct returns.
- Switch from iio_device_claim/release_direct_mode() to new
iio_device_claim/release_direct() which is structured so that sparse
can warn on failed releases. There were a few false positives but
those were mostly in code that benefited from being cleaned up as part
of this process.
- Introduce iio_push_to_buffers_with_ts() to replace the _timestamp()
version over time. This version takes the size of the supplied buffer
which the core checks is at least as big as expected by calculation
from channel descriptions of those channels enabled. Use this in
an initial set of drivers.
- Add macros for IIO_DECLARE_BUFFER_WITH_TS() and
IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure
correctly aligned buffers for timestamps being added onto the end of
channel data.
New device support
------------------
adi,ad3530r
- New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with
programmable gain controls. R variants have internal references.
adi,ad7476
- Add support (dt compatible only) for the Rohm BU79100G ADC which is
fully compatible with the ti,ads7866.
adi,ad7606
- Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic
channel information allocation.
adi,ad7380
- Add support for the AD7389-4
dfrobot,sen0322
- New driver for this oxygen sensor.
mediatek,mt2701-auxadc
- Add binding for MT6893 which is fully compatible with already supported
MT8173.
meson-saradc
- Support the GXLX SoCs. Mostly this is a workaround for some unrelated
clock control bits found in the ADC register map.
nuvoton,nct7201
- New driver for NCT7201 and NCT7202 I2C ADCs.
rohm,bd79124
- New driver for this 12-bit, 8-channel SAR ADC.
- Switch to new set_rv etc gpio callbacks that were added in 6.15.
rohm,bd79703
- Add support for BD79700, BD79701 and BD79702 DACs that have subsets of
functionality of the already supported bd79703. Included making this
driver suitable for support device variants.
st,stm32-lptimer
- Add support for stm32pm25 to this trigger.
Features
--------
Beyond IIO
- Property iterator for named children.
core
- Enable writes for 64 bit integers used for standard IIO ABI elements.
Previously these could be read only.
- Helper library that should avoid code duplication for simpler ADC
bindings that have a child node per channel.
- Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true
and simplifies code on all significant architectures)
core/backend
- Add support to control source of data - useful when the HDL includes
things like generated ramps for testing purposes. Enable this for
adi-axi-dac
adi,ad3552-hs
- Add debugfs related callbacks to allow debug access to register contents.
adi,ad4000
- Support SPI offload with appropriate FPGA firmware along with improving
documentation.
adi,ad7293
- Add support for external reference voltage.
adi,ad7606
- Support SPI offload.
adi,ad7768-1
- Support reset GPIO.
adi,admv8818
- Support filter frequencies beyond 2^32.
adi,adxl345
- Add single and double tap events.
hid-sensor-prox
- Support 16-bit report sizes as seen on some Intel platforms.
invensense,icm42600
- Enable use of named interrupts to avoid problems with some wiring choices.
Get the interrupt by name, but fallback to previous assumption on the first
being INT1 if no names are supplied.
microchip,mcp3911
- Add reset gpio support.
rohm,bh7150
- Add reset gpio support.
st,stm32
- Add support to control oversampling.
ti,adc128s052
- Add support for ROHM BD79104 which is early compatible with the TI
parts already supported by this driver. Includes some general driver
cleanup and a separate dt binding.
- Simplify reference voltage handling by assuming it is fixed after enabling
the supply.
winsen,mhz19b
- New driver for this C02 sensor.
Cleanup and minor fixes
-----------------------
dt-bindings
- Correct indentation and style for DTS examples.
- Use unevalutateProperties for SPI devices instead of additionalProperties
to allow generic SPI properties from spi-peripheral-props.yaml
ABI Docs
- Add missing docs for sampling_frequency when it applies only to events.
Treewide
- Various minor tweaks, comment fixes and similar.
- Sort TI ADCs in Kconfig that had gotten out of order.
- Switch various drives that provide GPIO chip functionality to the new
callbacks with return values.
- Standardize on { } formatting for all array sentinels.
- Make use of aligned_s64 in a few places to replace either wrong types
or manually defined equivalents.
- Drop places where spi bits_per_word is set to 8 because that is the
default anyway.
adi,ad_sigma_delta library
- Avoid a potential use of uninitialized data if reg_size has a value
that is not supported (no drivers hit this but it is reasonable hardening)
adi,ad4030
- Add error checking for scan types and no longer store it in state.
- Rework code to reduce duplication.
- Move setting the mode from buffer preenable() to update_scan_mode(),
better matching expected semantics of the two different callbacks.
- Improve data marshalling comments.
adi,ad4695
- Use u16 for buffer elements as oversampling is not yet supported except
with SPI offload (which doesn't use this path).
adi,ad5592r
- Clean up destruction of mutexes.
- Use lock guards to simplify code (later patch fixes a missed unlock)
adi,ad5933
- Correct some incorrect settling times.
adi,ad7091
- Deduplicate handling of writable vs volatile registers as they are the
inverse of each other for this device.
adi,ad7124
- Fix 3db Filter frequency.
- Remove ability to directly write the filter frequency (which was broken)
- Register naming improvements.
adi,ad7606
- Add a missing return value check.
- Fill in max sampling rates for all chips.
- Use devm_mutex_init()
- Fix up some kernel-doc formatting issues.
- Remove some camel case that snuck in.
- Drop setting address field in channels as easily established from other
fields.
- Drop unnecessary parameter to ad76060_scale_setup_cb_t.
adi,ad7768-1
- Convert to regmap.
- Factor out buffer allocation.
- Tidy up headers.
adi,ad7944
- Stop setting bits_per_word in SPI xfers with no data.
adi,ad9832
- Add of_device_id table rather than just relying on fallbacks.
- Use FIELD_PREP() to set values of fields.
adi,admv1013
- Cleanup a pointless ternary.
adi,admv8818
- Fix up LPF Band 5 frequency which was slightly wrong.
- Fix an integer overflow.
- Fix range calculation
adi,adt7316
- Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler
irq_get_trigger_type()
adi,adxl345
- Use regmap cache instead of various state variables that were there to
reduce bus accesses.
- Make regmap return value checking consistent across all call sites.
adi,axi-dac
- Add a check on number of channels (0 to 15 valid)
allwinner,sun20i
- Use new adc-helpers to replace local parsing code for channel nodes.
bosch,bmp290
- Move to local variables for sensor data marshalling removing the need
for a messy definition that has to work for all supported parts.
Follow up fix adds a missing initialization.
dynaimage,al3010 and dynaimage,al3320a
- Various minor cleanup to bring these drivers inline with reviewed feedback
given on a new driver.
- Fix an error path in which power down is not called when it should be.
- Switch to regmap.
google,cros_ec
- Fix up a flexible array in middle of structure warning.
- Flush fifo when changing the timeout to avoid potential long wait
for samples.
hid-sensor-rotation
- Remove an __aligned(16) marking that doesn't seem to be justified.
kionix,kxcjk-1013
- Deduplicate code for setting up interrupts.
microchip,mcp3911
- Fix handling of conversion results register which differs across supported
devices.
idt,zopt2201
- Avoid duplicating register lists as all volatile registers are the
inverse of writeable registers on this device.
renesas,rzg2l
- Use new adc-helpers to replace local parsing code for channel nodes.
ti,ads1298
- Fix a missing Kconfig dependency.
* tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (260 commits)
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
iio: pressure: zpa2326_spi: remove bits_per_word = 8
iio: pressure: ms5611_spi: remove bits_per_word = 8
...
Remove setting bits_per_word = 8 from the adis driver. This is the
default value for SPI transfers, so it is not necessary to explicitly
set it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-remove-bits_per_word-8-v1-9-341f85fcfe11@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>From the documentation:
"offset to be added to <type>[Y]_raw prior toscaling by <type>[Y]_scale"
Offset should be applied before multiplying scale, so divide offset by
scale to make this correct.
Fixes: bc3eb0207f ("iio: imu: inv_icm42600: add temperature sensor support")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250502-imu-v1-1-129b8391a4e3@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use `\t(\{ ?\},|\{\}|\{\s*/\*.*\*/\s*\},?)$` regex to find and replace
the array sentinel in all IIO drivers to the same style.
For some time, we've been trying to consistently use `{ }` (no trailing
comma, no comment, one space between braces) for array sentinels in the
IIO subsystem. Still nearly 50% of existing code uses a different style.
To save reviewers from having to request this trivial change as
frequently, let's normalize the style in all existing IIO drivers.
At least when code is copy/pasted to new drivers, the style will be
consistent.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250411-iio-sentinel-normalization-v1-1-d293de3e3d93@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use generic fwnode_irq_get_byname() for getting interrupt pin using
interrupt name. Only INT1 is supported by the driver currently.
If not found fallback to first defined interrupt to keep compatibility.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250410-iio-imu-inv-icm42600-rework-interrupt-using-names-v4-2-19e4e2f8f7eb@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These new functions allow sparse to find failures to release
direct mode reducing chances of bugs over the claim_direct_mode()
functions that are deprecated.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250331121317.1694135-21-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver caused a false positive with __cond_lock() style solution
but is fine with the simple boolean return approach now used.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250331121317.1694135-20-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
By factoring out all the code that occurs with direct mode claimed
to a helper function, that helper function can directly return simplifying
code flow.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250331121317.1694135-19-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These new functions allow sparse to find failures to release
direct mode reducing chances of bugs over the claim_direct_mode()
functions that are deprecated.
Cc: Shen Jianping <Jianping.Shen@de.bosch.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250331121317.1694135-18-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These new functions allow sparse to find failures to release
direct mode reducing chances of bugs over the claim_direct_mode()
functions that are deprecated.
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250331121317.1694135-17-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These new functions allow sparse to find failures to release
direct mode reducing chances of bugs over the claim_direct_mode()
functions that are deprecated.
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250331121317.1694135-16-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Align the buffers used with iio_push_to_buffers_with_timestamp() to
ensure the s64 timestamp is aligned to 8 bytes.
Fixes: bac4368fab ("iio: imu: adis16550: add adis16550 support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250418-iio-more-timestamp-alignment-v2-1-d6a5d2b1c9fe@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Align the buffer used with iio_push_to_buffers_with_timestamp() to
ensure the s64 timestamp is aligned to 8 bytes.
Fixes: 0829edc43e ("iio: imu: inv_mpu6050: read the full fifo when processing data")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-7-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250406-b4-device-wakeup-leak-iio-v1-3-2d7d322a4a93@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Prevent st_lsm6dsx_read_tagged_fifo from falling in an infinite loop in
case pattern_len is equal to zero and the device FIFO is not empty.
Fixes: 801a6e0af0 ("iio: imu: st_lsm6dsx: add support to LSM6DSO")
Signed-off-by: Silvano Seva <s.seva@4sigma.it>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250311085030.3593-4-s.seva@4sigma.it
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Prevent st_lsm6dsx_read_fifo from falling in an infinite loop in case
pattern_len is equal to zero and the device FIFO is not empty.
Fixes: 290a6ce11d ("iio: imu: add support to lsm6dsx driver")
Signed-off-by: Silvano Seva <s.seva@4sigma.it>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250311085030.3593-2-s.seva@4sigma.it
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the bmi270_configure_imu() function, the accelerometer and gyroscope
configuration registers are incorrectly written with the mask
BMI270_PWR_CONF_ADV_PWR_SAVE_MSK, which is unrelated to these registers.
As a result, the accelerometer's sampling frequency is set to 200 Hz
instead of the intended 100 Hz.
Remove the mask to ensure the correct bits are set in the configuration
registers.
Fixes: 3ea51548d6 ("iio: imu: Add i2c driver for bmi270 imu")
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Reviewed-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patch.msgid.link/20250304-bmi270-odr-fix-v1-1-384dbcd699fb@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform bus
interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mNdQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylktACfYJix41jCCDbiFjnu7Hz4OIdcrUsAnRyF164M
1n5MhEhsEmvQj7WBwQLE
=AmmW
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
The BMI270 sensor provides two interrupt pins that can be used for
different interrupt sources, including a data ready signal. Add support
for configuring one the pins as a trigger source.
The interrupt pin can be configured with various options: active high or
low, push-pull or open-drain, and latched or non-latched.
Acked-by: Alex Lanzano <lanzano.alex@gmail.com>
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Link: https://patch.msgid.link/20250228-bmi270-irq-v2-3-3f97a4e8f551@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rename all instances of 'struct bmi270_data' to 'data', to ensure
consistency across the driver.
Also rename bmi270_data::data to bmi270_data::buffer to avoid naming
conflicts.
Acked-by: Alex Lanzano <lanzano.alex@gmail.com>
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Link: https://patch.msgid.link/20250228-bmi270-irq-v2-2-3f97a4e8f551@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The device's private data struct is currently declared in the header
file, but it does not need to be exposed there. Move it to the driver's
core source file to avoid unnecessary #include directives or forward
declarations in the header.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Acked-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patch.msgid.link/20250219-bmi270-irq-v1-1-145d02bbca3b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADIS16550 is a complete inertial system that includes a triaxis
gyroscope and a triaxis accelerometer. Each inertial sensor in the
ADIS16550 combines industry leading MEMS only technology with signal
conditioning that optimizes dynamic performance. The factory calibration
characterizes each sensor for sensitivity, bias, and alignment. As a
result, each sensor has its own dynamic compensation formulas that
provide accurate sensor measurements.
Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
Link: https://patch.msgid.link/20250217105753.605465-6-robert.budai@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of including a huge device.h with tons of dependencies
include only what driver actually uses.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
