Define function to bring phy lane out of reset for LT Phy and the
corresponding pre-requisite steps before we follow the steps for
Phy lane reset. Also create a skeleton of LT PHY PLL enable sequence
function in which we can place this function
Bspec: 77449, 74749, 74499, 74495, 68960
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-4-suraj.kandpal@intel.com
We already have some SR-IOV specific knobs exposed as debugfs
files to allow low level tuning of the SR-IOV configurations,
but those files are mainly for the use by the developers and
debugfs might not be available on the production builds.
Start building dedicated sysfs sub-tree under xe device, where
in upcoming patches we will add selected attributes that will
help provision and manage PF and all VFs:
/sys/bus/pci/drivers/xe/BDF/
├── sriov_admin/
├── pf/
├── vf1/
├── vf2/
:
└── vfN/
Add all required data types and helper macros that will be used
by upcoming patches to define actual attributes.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-2-michal.wajdeczko@intel.com
Reduce the compat i915_utils.h to only cover the requirements of
MISSING_CASE() in soc/ and the few i915_inject_probe_failure()
instances, instead of including the entire i915_utils.h from i915. This
prevents new users for the utilities from cropping up.
With this, we can remove the xe/display/ext/i915_utils.c altogether.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/c02f82e45f31caf95bd1339080b9099c3b7190be.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add intel_display_utils.c for display utilities that need more than a
header.
Start off with intel_display_run_as_guest(). The implementation is
intentional duplication of the i915_utils.h i915_run_as_guest(), with
the idea that it's small enough to not matter.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/469f9c41e0c3e3099314a3cf1a7671bf36ec8ffd.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add register definitions for sharpness strength and
filter window size used by CASF. Provide functions to
read and write these fields.
The sharpness strength value is determined by user input,
while the winsize is based on the resolution. The casf_enable
flag should be set if the platform supports sharpness adjustments
and the user API strength is not zero. Once sharpness is
enabled, update the strength bit of the register whenever
the user changes the strength value, as the enable bit and
winsize bit remain constant.
Introduce helper to enable, disable and update strength.
Add relavant strength and winsize in both enable and disable.
v2: Introduce get_config for casf[Ankit]
v3: Replace 0 with FILTER_STRENGTH_MASK[Ankit]
v4: After updating strength add win_sz register
v5: Replace u16 with u32 for total_pixel
v6: Add casf logging
v7: Add helper for enable and disable casf
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251028120747.3027332-4-ankit.k.nautiyal@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As we plan to add more VFs provisioning methods, start moving
related code into single place.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251015091211.592-2-michal.wajdeczko@intel.com
Currently intel_bw.c contains basically three completely independent
parts:
- SAGV/memory bandwidth handling
- DBuf bandwidth handling
- "Maximum pipe read bandwidth" calculation, which is some kind
of internal per-pipe bandwidth limit.
Carve out the DBuf bandwdith handling into a separate file since
there is no actual dependency between it and the rest of intel_bw.c.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Add a new helper thingy to deal with the pipe prefill latency.
We get three potentially useful thigns out of this:
- skl_prefill_vblank_too_short() used for checking the
actual vblank/guardband length
- skl_prefill_min_guardband() to calculate a suitable guardband
size based on some worst case scaling/etc. estimates
- skl_prefill_min_cdclk() used to calculate a minimum cdclk
frequency required for very small vblank lengths (in case the
otherwise computed minimum cdclk doesn't result in fast enough
prefill).
The internal arithmetic is done terms of scanlines using .16
binary fixed point representation.
v2: Add the missing <<16 for framestart_delay
Drop the cdclk_state stuff in favor of crtc_state->min_cdclk
Rename to skl_prefill since this is skl+ only
Use intel_crtc_vblank_length() instead of hand rolling it
memset(0) in prefill_init()
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-9-ville.syrjala@linux.intel.com
We already have control functions that we use to control the VF
state on the per-GT basis, but that is low level detail from the
user point of view, who rather expects VF-level functions.
For now add simple functions that just iterate over all GTs and
call per-GT control function. We will soon allow to use some of
them from the user facing interfaces like debugfs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250930233525.201263-2-michal.wajdeczko@intel.com
Populate new per SR-IOV function debugfs directories with next
level directories that represent tiles. There are no files yet,
but we will continue updating that tree in upcoming patches.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250928140029.198847-4-michal.wajdeczko@intel.com
In upcoming patches, we will build on the PF separate debugfs
tree for all SR-IOV related files and this new code will need
dedicated file. To minimize large diffs later, move existing
function now as-is, so any future modifications will be done
directly in target file.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250928140029.198847-2-michal.wajdeczko@intel.com
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
-----BEGIN PGP SIGNATURE-----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=2NXV
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-09-19' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/c2et6dnkst2apsgt46dklej4nprqdukjosb55grpaknf3pvcxy@t7gtn3hqtp6n
Introduce xe_late_bind_fw to enable firmware loading for the devices,
such as the fan controller, during the driver probe. Typically,
firmware for such devices are part of IFWI flash image but can be
replaced at probe after OEM tuning.
This patch binds mei late binding component to enable firmware loading.
v2:
- Add devm_add_action_or_reset to remove the component (Daniele)
- Add INTEL_MEI_GSC check in xe_late_bind_init() (Daniele)
v3:
- Fail driver probe if late bind initialization fails,
add has_late_bind flag (Daniele)
v4:
- %s/I915_COMPONENT_LATE_BIND/INTEL_COMPONENT_LATE_BIND/
v6:
- rebased
v7:
- rebased
- In xe_late_bind_init, use drm_err when returning an error to
stop the probe (Lucas)
- Use imperative mode in commit message (Lucas)
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905154953.3974335-4-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We want all validation (potential backing store allocation) to be part
of a drm_exec transaction. Therefore add a drm_exec pointer argument
to xe_bo_validate() and ___xe_bo_create_locked(). Upcoming patches
will deal with making all (or nearly all) calls to these functions
part of a drm_exec transaction. In the meantime, define special values
of the drm_exec pointer:
XE_VALIDATION_UNIMPLEMENTED: Implementation of the drm_exec transaction
has not been done yet.
XE_VALIDATION_UNSUPPORTED: Some Middle-layers (dma-buf) doesn't allow
the drm_exec context to be passed down to map_attachment where
validation takes place.
XE_VALIDATION_OPT_OUT: May be used only for kunit tests where exhaustive
eviction isn't crucial and the ROI of converting those is very
small.
For XE_VALIDATION_UNIMPLEMENTED and XE_VALIDATION_OPT_OUT there is also
a lockdep check that a drm_exec transaction can indeed start at the
location where the macro is expanded. This is to encourage
developers to take this into consideration early in the code
development process.
v2:
- Fix xe_vm_set_validation_exec() imbalance. Add an assert that
hopefully catches future instances of this (Matt Brost)
v3:
- Extend to psmi_alloc_object
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v3
Link: https://lore.kernel.org/r/20250908101246.65025-2-thomas.hellstrom@linux.intel.com
intel_bo.[ch] is not the appropriate location for the panic
functionality. Split out intel_panic.[ch] and xe_panic.c in i915 and
xe. Keep the function names for now.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/d98b831a011a028ffd33ce99b0ba62be061ee235.1756835342.git.jani.nikula@intel.com
Goal here is cut over to gpusvm and remove xe_hmm, relying instead on
common code. The core facilities we need are get_pages(), unmap_pages()
and free_pages() for a given useptr range, plus a vm level notifier
lock, which is now provided by gpusvm.
v2:
- Reuse the same SVM vm struct we use for full SVM, that way we can
use the same lock (Matt B & Himal)
v3:
- Re-use svm_init/fini for userptr.
v4:
- Allow building xe without userptr if we are missing DRM_GPUSVM
config. (Matt B)
- Always make .read_only match xe_vma_read_only() for the ctx. (Dafna)
v5:
- Fix missing conversion with CONFIG_DRM_XE_USERPTR_INVAL_INJECT
v6:
- Convert the new user in xe_vm_madise.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Dafna Hirschfeld <dafna.hirschfeld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250828142430.615826-17-matthew.auld@intel.com
This will simplify compiling out the bits that depend on DRM_GPUSVM in a
later patch. Without this we end up littering the code with ifdef
checks, plus it becomes hard to be sure that something won't blow at
runtime due to something not being initialised, even though it passed
the build. Should be no functional change here.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250828142430.615826-16-matthew.auld@intel.com
Our drm-based suballocator is implemented per-tile so it is better
to show its debug information also per-tile debugfs directory, not
under per-gt directory as it is done today.
To allow adding more per-tile attributes, prepare necessary helper
functions, like we already did for per-gt or per-uc attributes.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250829201106.1263-1-michal.wajdeczko@intel.com
The frontend exposes an API to the driver to send invalidations, handles
sequence number assignment, synchronization (fences), and provides a
timeout mechanism. The backend issues the actual invalidation to the
hardware (or firmware).
The new layering easily allows issuing TLB invalidations to different
hardware or firmware interfaces.
Normalize some naming while here too.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-10-stuart.summers@intel.com
Decouple TLB invalidations from the GT by updating the TLB invalidation
layer to accept a `struct xe_tlb_inval` instead of a `struct xe_gt`.
Also, rename *gt_tlb* to *tlb*. The internals of the TLB invalidation
code still operate on a GT, but this is now hidden from the rest of the
driver.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-7-stuart.summers@intel.com
tlb_invalidation is a bit verbose leading to ugly wraps in the code,
shorten to tlb_inval.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-4-stuart.summers@intel.com
Gfx device reports two classes of errors: uncorrectable and
correctable. Depending on the severity uncorrectable errors are further
classified Non-Fatal and Fatal.
Correctable and Non-Fatal errors: These errors are reported as MSI. Bits in
the Master Interrupt Register indicate the class of the error.
The source of the error is then read from the Device Error Source
Register.
Fatal errors: These are reported as PCIe errors
When a PCIe error is asserted, the OS will perform a SBR (Secondary
Bus reset) which causes the driver to reload. The error registers are
sticky and the values are maintained through SBR.
Add basic support to handle these errors.
Bspec: 50875, 53073, 53074, 53075, 53076
v2: Format commit message (Umesh)
v3: fix documentation (Stuart)
Cc: Stuart Summers <stuart.summers@intel.com>
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-9-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This driver-specific ioctl enables UMDs to control the memory attributes
for GPU VMAs within a specified input range. If the start or end
addresses fall within an existing VMA, the VMA is split accordingly. The
attributes of the VMA are modified as provided by the users. The old
mappings of the VMAs are invalidated, and TLB invalidation is performed
if necessary.
v2(Matthew brost)
- xe_vm_in_fault_mode can't be enabled by Mesa, hence allow ioctl in non
fault mode too
- fix tlb invalidation skip for same ranges in multiple op
- use helper for tlb invalidation
- use xe_svm_notifier_lock/unlock helper
- s/lockdep_assert_held/lockdep_assert_held_write
- Add kernel-doc
v3(Matthew Brost)
- make vfunc fail safe
- Add sanitizing input args before vfunc
v4(Matthew Brost/Shuicheng)
- Make locks interruptable
- Error handling fixes
- vm_put fixes
v5(Matthew Brost)
- Flush garbage collector before any locking.
- Add check for null vma
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-9-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Requirement for PSMI capture is to have a physically contiguous buffer.
All the needed configuration is done by the userspace tool directly to
the GPU via mmio access.
This interface only support allocating from VRAM regions. For integrated
devices, the PSMI buffer is in SYSTEM memory and should be allocated by
userspace using hugetlbfs.
Here we add the ability to allocate a region of physically contiguous
memory by writing to debugfs file (listed below). For multi-tile devices,
the capture tool requires ability to allocate a capture buffer per tile
(VRAM region) and so user can specify a region_mask. The tool then
can mmap the buffers via direct mmap of the PCIBAR via sysfs.
To support the capture tool, 3 new debugfs entries are added:
psmi_capture_addr - physical address per VRAM region's capture buffer
psmi_capture_region_mask - select which region(s) to allocate a buffer
psmi_capture_size - size of current capture buffer
Writing psmi_capture_size will allocate new buffer of requested size per
region after freeing any current buffers.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Original-author: Brian Welty <brian.welty@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> # v2
Link: https://lore.kernel.org/r/20250821-psmi-v5-2-34ab7550d3d8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Allow the driver to expose hardware register spaces to userspace
through GEM objects with fake mmap offsets. This can be useful
for userspace-firmware communication, debugging, etc.
v2: Minor doc fix (CI)
v3: Enforce MAP_SHARED (Tejas)
Add fault handler with dummy page (Tejas, Matt Auld)
Store physical address instead of xe_mmio in the GEM object (MattB)
v4: Separate xe_mmio_gem from xe_mmio and make it private (MattB)
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250714122658.1803-1-ilia.levi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add GT TLB invalidation jobs which issue GT TLB invalidations. Built on
top of Xe generic dependency scheduler.
v2:
- Fix checkpatch
v3:
- Fix kernel doc in xe_gt_tlb_inval_job_alloc_dep,
xe_gt_tlb_inval_job_push
- Use IS_ERR_OR_NULL in xe_gt_tlb_inval_job_put
- Squash migrate lock / unlock helpers into this patch (Stuart)
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-6-matthew.brost@intel.com
Add generic dependecy jobs / scheduler which serves as wrapper for DRM
scheduler. Useful when we want delay a generic operation until a
dma-fence signals.
Existing use cases could be destroying of resources based fences /
dma-resv, the preempt rebind worker, and pipelined GT TLB invalidations.
Written in such a way it could be moved to DRM subsystem if needed.
v3:
- Remove unnecessary cast (Staurt)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-3-matthew.brost@intel.com
Create two LRCs to handle CCS meta data read / write from CCS pool in the
VM. Read context is used to hold GPU instructions to be executed at save
time and write context is used to hold GPU instructions to be executed at
the restore time.
Allocate batch buffer pool using suballocator for both read and write
contexts.
Migration framework is reused to create LRCAs for read and write.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250722120506.6483-2-satyanarayana.k.v.p@intel.com
While some VF/PF relay actions must be handled on the GT level,
like query for runtime registers, it was clarified by the arch
team that initial version negotiation can be done by the VF just
once, by using any available GuC/GT.
Move handling of the VF/PF ABI version negotiation on the PF side
from the GT level functions to the device level functions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250713103625.1964-7-michal.wajdeczko@intel.com
There are some workarounds that must be appplied before gt init,
wa_15015404425 for example. Instead of sprinking them conditionally
throughout the driver as we did for i915 generate an oob.rules file
reusing the RTP infrastructure to make these easier to track.
v2: rename xe_soc_wa to xe_device_wa
v5: derive prefix from argument rather than hard coding the values.
v6: split out xe_gen-wa_oob changes
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250709221605.172516-3-matthew.s.atwood@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Adding adaption/glue layer where the I2C host adapter
(Synopsys DesignWare I2C adapter) and the I2C clients (the
microcontroller units) are enumerated.
The microcontroller units (MCU) that are attached to the GPU
depend on the OEM. The initially supported MCU will be the
Add-In Management Controller (AMC).
Co-developed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250701122252.2590230-4-heikki.krogerus@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo fixed the co-developed tags and SPDX format in the .c file]
Provide the lower level code for PIPEDMC based flip queue.
We'll use the so called semi-full flip queue mode where the
PIPEDMC will start the provided DSB on a scanline a little
ahead of the vblank. We need to program the triggering scanline
early enough so that the DSB has enough time to complete writing
all the double buffered registers before they get latched (at
start of vblank).
The firmware implements several queues:
- 3 "plane queues" which execute a single DSB per entry
- 1 "general queue" which can apparently execute 2 DSBs per entry
- 1 vestigial "fast queue" that replaced the "simple flip queue"
on ADL+, but this isn't supposed to be used due to issues.
But we only need a single plane queue really, and we won't actually
use it as a real queue because we don't allow queueing multiple commits
ahead of time. So the whole thing is perhaps useless. I suppose
there migth be some power saving benefits if we would get the flip
scheduled by userspace early and then could keep some hardware powered
off a bit longer until the DMC kicks off the flipq programming. But that
is pure speculation at this time and needs to be proven.
The code to hook up the flip queue into the actual atomic commit
path will follow later.
TODO: need to think how to do the "wait for DMC firmware load" nicely
need to think about VRR and PSR
etc.
v2: Don't write DMC_FQ_W2_PTS_CFG_SEL on pre-lnl
Don't oops at flipq init if there is no dmc
v3: Adapt to PTL+ flipq changes (different queue entry
layout, different trigger event, need VRR TG)
Use the actual CDCLK frequency
Ask the DSB code how long things are expected to take
v3: Adjust the cdclk rounding (docs are 100% vague, Windows
rounds like this)
Initialize some undocumented magic DMC variables on PTL
v4: Use PIPEDMC_FQ_STATUS for busy check (the busy bit in
PIPEDMC_FQ_CTRL is apparently gone on LNL+)
Based the preempt timeout on the max exec time
Preempt before disabling the flip queue
Order the PIPEDMC_SCANLINECMP* writes a bit more carefully
Fix some typos
v5: Try to deal with some clang-20 div-by-zero false positive (Nathan)
Add some docs (Jani)
Cc: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
epr
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-5-ville.syrjala@linux.intel.com
Enable access to internal non-volatile memory on DGFX
with GSC/CSC devices via a child device.
The nvm child device is exposed via auxiliary bus.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250617145159.3803852-7-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some of our VF functions, even if they take a GT pointer, work
only on primary GT and really are tile-related and would be better
to keep them separate from the rest of true GT-oriented functions.
Move them to a file and update to take a tile pointer instead.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20250602103325.549-3-michal.wajdeczko@intel.com
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmgcsdUACgkQ+mJfZA7r
E8rYqAf/citknZ0aTAOw7+O8581v6/27BsmRYO8T2JvhHWr3RIOeowgyEQ9M3m6y
jBM5qIsGH0JOrDMVDjvuVlfm+JAPRxVABo3GXTpUIu94xszwco+5iQNnHBui0NrP
AnAauh/MZC6YKmTzNVBHW35N+JQJ9clmK6Rf5Bzb8pVP1bPRwRFSpgefHBeimRRY
qeQlqEVfvst5gkQiTe2b/5ydErPB7WfBY4WHGrgykBPt0+3t7Zln3Dqbdm9vB7+p
zEHXQNvX75KGFimUgCf7mU2Hoov0LI1/cazeG1dbv6gczXOUySwIKRIuqKNJ6XsG
PSV0X8Hc1ppL4Sp1Oe/WAdwE2k/xxw==
=rvsI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-05-08' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
Make the gt rps code and display irq code interact via
intel_display_rps.[ch], instead of direct access. Add no-op static
inline stubs for xe instead of having a separate build unit doing
nothing. All of this clarifies the interfaces between i915 core and
display.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/ef2a46dc8f30b72282494f54e98cb5fed7523b58.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix drm_gpusvm kernel-doc (Lucas)
Driver Changes:
- Release guc ids before cancelling work (Tejas)
- Remove a duplicated pc_start_call (Rodrigo)
- Fix an incorrect assert in previous userptr fixes (Thomas)
- Remove gen11 assertions and prefixes (Lucas)
- Drop sentinels from arg to xe_rtp_process_to_src (Lucas)
- Temporarily disable D3Cold on BMG (Rodrigo)
- Fix MOCS debugfs LNCF readout (Tvrtko)
- Some ring flush cleanups (Tvrtko)
- Use unsigned int for alignment in fb pinning code (Tvrtko)
- Retry and wait longer for GuC PC start (Rodrigo)
- Recognize 3DSTATE_COARSE_PIXEL in LRC dumps (Matt Roper)
- Remove reduntant check in xe_vm_create_ioctl() (Xin)
- A bunch of SRIOV updates (Michal)
- Add stats for SVM page-faults (Francois)
- Fix an UAF (Harish)
- Expose fan speed (Raag)
- Fix exporting xe buffer objects multiple times (Tomasz)
- Apply a workaround (Vinay)
- Simplify pinned bo iteration (Thomas)
- Remove an incorrect "static" keywork (Lucas)
- Add support for separate firmware files on each GT (Lucas)
- Survivability handling fixes (Lucas)
- Allow to inject error in early probe (Lucas)
- Fix unmet direct dependencies warning (Yue Haibing)
- More error injection during probe (Francois)
- Coding style fix (Maarten)
- Additional stats support (Riana)
- Add fault injection for xe_oa_alloc_regs (Nakshrtra)
- Add a BMG PCI ID (Matt Roper)
- Some SVM fixes and preliminary SVM multi-device work (Thomas)
- Switch the migrate code from drm managed to dev managed (Aradhya)
- Fix an out-of-bounds shift when invalidating TLB (Thomas)
- Ensure fixed_slice_mode gets set after ccs_mode change (Niranjana)
- Use local fence in error path of xe_migrate_clear (Matthew Brost)
- More Workarounds (Julia)
- Define sysfs_ops on all directories (Tejas)
- Set power state to D3Cold during s2idle/s3 (Badal)
- Devcoredump output fix (John)
- Avoid plain 64-bit division (Arnd Bergmann)
- Reword a debug message (John)
- Don't print a hwconfig error message when forcing execlists (Stuart)
- Restore an error code to avoid a smatch warning (Rodrigo)
- Invalidate L3 read-only cachelines for geometry streams too (Kenneth)
- Make PPHWSP size explicit in xe_gt_lrc_size() (Gustavo)
- Add GT frequency events (Vinay)
- Fix xe_pt_stage_bind_walk kerneldoc (Thomas)
- Add a workaround (Aradhya)
- Rework pinned save/restore (Matthew Auld, Matthew Brost)
- Allow non-contig VRAM kernel BO (Matthew Auld)
- Support non-contig VRAM provisioning for SRIOV (Matthew Auld)
- Allow scratch-pages for unmapped parts of page-faulting VMs. (Oak)
- Ensure XE_BO_FLAG_CPU_ADDR_MIRROR had a unique value (Matt Roper)
- Fix taking an invalid lock on wedge (Lucas)
- Configs and documentation for survivability mode (Riana)
- Remove an unused macro (Shuicheng)
- Work around a page-fault full error (Matt Brost)
- Enable a SRIOV workaround (John)
- Bump the recommended GuC version (John)
- Allow to drop VRAM resizing (Lucas)
- Don't expose privileged debugfs files if VF (Michal)
- Don't show GGTT/LMEM debugfs files under media GT (Michal)
- Adjust ring-buffer emission for maximum possible size (Tvrtko)
- Fix notifier vs folio lock deadlock (Matthew Auld)
- Stop relying on placement for dma-buf unmap Matthew Auld)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCaADVdgAKCRC4FpNVCsYG
vwhhAP95latf9GQChxq3th3z42uVe6YH0GxdorbgHvbrPkW9NwD+OjKNCe9BjADT
3T1uC+Lf0MkN4kJwIHp9tS0imyh0AgI=
=U5BC
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-04-17' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Core Changes:
Fix drm_gpusvm kernel-doc (Lucas)
Driver Changes:
- Release guc ids before cancelling work (Tejas)
- Remove a duplicated pc_start_call (Rodrigo)
- Fix an incorrect assert in previous userptr fixes (Thomas)
- Remove gen11 assertions and prefixes (Lucas)
- Drop sentinels from arg to xe_rtp_process_to_src (Lucas)
- Temporarily disable D3Cold on BMG (Rodrigo)
- Fix MOCS debugfs LNCF readout (Tvrtko)
- Some ring flush cleanups (Tvrtko)
- Use unsigned int for alignment in fb pinning code (Tvrtko)
- Retry and wait longer for GuC PC start (Rodrigo)
- Recognize 3DSTATE_COARSE_PIXEL in LRC dumps (Matt Roper)
- Remove reduntant check in xe_vm_create_ioctl() (Xin)
- A bunch of SRIOV updates (Michal)
- Add stats for SVM page-faults (Francois)
- Fix an UAF (Harish)
- Expose fan speed (Raag)
- Fix exporting xe buffer objects multiple times (Tomasz)
- Apply a workaround (Vinay)
- Simplify pinned bo iteration (Thomas)
- Remove an incorrect "static" keywork (Lucas)
- Add support for separate firmware files on each GT (Lucas)
- Survivability handling fixes (Lucas)
- Allow to inject error in early probe (Lucas)
- Fix unmet direct dependencies warning (Yue Haibing)
- More error injection during probe (Francois)
- Coding style fix (Maarten)
- Additional stats support (Riana)
- Add fault injection for xe_oa_alloc_regs (Nakshrtra)
- Add a BMG PCI ID (Matt Roper)
- Some SVM fixes and preliminary SVM multi-device work (Thomas)
- Switch the migrate code from drm managed to dev managed (Aradhya)
- Fix an out-of-bounds shift when invalidating TLB (Thomas)
- Ensure fixed_slice_mode gets set after ccs_mode change (Niranjana)
- Use local fence in error path of xe_migrate_clear (Matthew Brost)
- More Workarounds (Julia)
- Define sysfs_ops on all directories (Tejas)
- Set power state to D3Cold during s2idle/s3 (Badal)
- Devcoredump output fix (John)
- Avoid plain 64-bit division (Arnd Bergmann)
- Reword a debug message (John)
- Don't print a hwconfig error message when forcing execlists (Stuart)
- Restore an error code to avoid a smatch warning (Rodrigo)
- Invalidate L3 read-only cachelines for geometry streams too (Kenneth)
- Make PPHWSP size explicit in xe_gt_lrc_size() (Gustavo)
- Add GT frequency events (Vinay)
- Fix xe_pt_stage_bind_walk kerneldoc (Thomas)
- Add a workaround (Aradhya)
- Rework pinned save/restore (Matthew Auld, Matthew Brost)
- Allow non-contig VRAM kernel BO (Matthew Auld)
- Support non-contig VRAM provisioning for SRIOV (Matthew Auld)
- Allow scratch-pages for unmapped parts of page-faulting VMs. (Oak)
- Ensure XE_BO_FLAG_CPU_ADDR_MIRROR had a unique value (Matt Roper)
- Fix taking an invalid lock on wedge (Lucas)
- Configs and documentation for survivability mode (Riana)
- Remove an unused macro (Shuicheng)
- Work around a page-fault full error (Matt Brost)
- Enable a SRIOV workaround (John)
- Bump the recommended GuC version (John)
- Allow to drop VRAM resizing (Lucas)
- Don't expose privileged debugfs files if VF (Michal)
- Don't show GGTT/LMEM debugfs files under media GT (Michal)
- Adjust ring-buffer emission for maximum possible size (Tvrtko)
- Fix notifier vs folio lock deadlock (Matthew Auld)
- Stop relying on placement for dma-buf unmap Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aADWaEFKVmxSnDLo@fedora
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmf5ExAACgkQ+mJfZA7r
E8rS+Qf/WVswQAzNmDQxSBYvZJl7PFzk0zgrTTixwz8ePDezcnEE/+7VsMuQ3ZY+
k/7uve2WApoRAh8Z4+rpxHu/x3F4fI8oWXXt9Ug7f0OwVlKz4cgE5ax04m+90wqu
j7N5NZcGwMUEPR192GZqALxzSaWsRhPH0p8A32f9PU/Tq1+UTSEwwaMKDIRdmtiR
VHU8rS694tuXXuGoHiHOPMYDacxyQE7XRyTqaBaBvMQrjgbc+ZqcdG+b+Mnp3t6N
GIs4CkT6UkDEpnovA66FSiBWLBkrnNFfnyO5WEUbR13CB459XpwB0as8o2HW85oT
Q6Nui8w3ZeaGUi6U764fNm/FxFh4vw==
=3VwH
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-04-11' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-subsystem Changes:
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/Z_kTqPX5Mjruq1pL@intel.com
The only usage of the "PCH" infra is to detect which South Display
Engine we should be using. Move it under display so we can convert
all its callers towards intel_display struct later.
No functional or code change.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/041e3dee494aa15c22172360f2bdd9b15e4acb00.1744364975.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Registers a configfs subsystem called 'xe' that creates a
directory in the mounted configfs directory (/sys/kernel/config)
Userspace can then create the device that has to be configured
under the xe directory
mkdir /sys/kernel/config/xe/0000:03:00.0
The device created will have the following attributes to be
configured
/sys/kernel/config/xe/
.. 0000:03:00.0/
... survivability_mode
v2: fix kernel-doc
fix return value (Lucas)
v3: fix kernel-doc (Lucas)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250407051414.1651616-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Don't rely on CONFIG_DRM_GPUSVM because other drivers may enable it
causing us to compile in SVM support unintentionally.
Also take the opportunity to leave more code out of compilation if
!CONFIG_DRM_XE_GPUSVM and !CONFIG_DRM_XE_DEVMEM_MIRROR
v3:
- Fixes for compilation errors on 32-bit. This changes the Kconfig
logic a bit.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250326080551.40201-2-thomas.hellstrom@linux.intel.com
Add display specific wrappers around the i915 and xe dedicated runtime
PM interfaces. There are no conversions here, just the wrappers.
Implement with_intel_display_rpm() without needing to provide a local
variable, which neatly narrows the scope and hides the type of the
wakeref cookie.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/086b312367fa0fbd8de92e9764117aa7ff4a8cc5.1742483007.git.jani.nikula@intel.com
- Expose per-engine activity via perf pmu (Riana, Lucas, Umesh)
- Add support for EU stall sampling (Harish, Ashutosh)
- Allow userspace to provide low latency hint for submission (Tejas)
- GPU SVM and Xe SVM implementation (Matthew Brost)
Cross-subsystem Changes:
- devres handling for component drivers (Lucas)
- Backmege drm-next to allow cross dependent change with i915
- GPU SVM and Xe SVM implementation (Matthew Brost)
Core Changes:
Driver Changes:
- Fixes to userptr and missing validations (Matthew Auld, Thomas
Hellström, Matthew Brost)
- devcoredump typos and error handling improvement (Shuicheng)
- Allow oa_exponent value of 0 (Umesh)
- Finish moving device probe to devm (Lucas)
- Fix race between submission restart and scheduled being freed (Tejas)
- Fix counter overflows in gt_stats (Francois)
- Refactor and add missing workarounds and tunings for pre-Xe2 platforms
(Aradhya, Tvrtko)
- Fix PXP locks interaction with exec queues being killed (Daniele)
- Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper)
- Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez)
- New workarounds for Panther Lake (Tejas)
- Fix VF resume errors (Satyanarayana)
- Fix workaround infra skipping some workarounds dependent on engine
initialization (Tvrtko)
- Improve per-IP descriptors (Gustavo)
- Add more error injections to probe sequence (Francois)
-----BEGIN PGP SIGNATURE-----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=98mS
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-03-07' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose per-engine activity via perf pmu (Riana, Lucas, Umesh)
- Add support for EU stall sampling (Harish, Ashutosh)
- Allow userspace to provide low latency hint for submission (Tejas)
- GPU SVM and Xe SVM implementation (Matthew Brost)
Cross-subsystem Changes:
- devres handling for component drivers (Lucas)
- Backmege drm-next to allow cross dependent change with i915
- GPU SVM and Xe SVM implementation (Matthew Brost)
Core Changes:
Driver Changes:
- Fixes to userptr and missing validations (Matthew Auld, Thomas
Hellström, Matthew Brost)
- devcoredump typos and error handling improvement (Shuicheng)
- Allow oa_exponent value of 0 (Umesh)
- Finish moving device probe to devm (Lucas)
- Fix race between submission restart and scheduled being freed (Tejas)
- Fix counter overflows in gt_stats (Francois)
- Refactor and add missing workarounds and tunings for pre-Xe2 platforms
(Aradhya, Tvrtko)
- Fix PXP locks interaction with exec queues being killed (Daniele)
- Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper)
- Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez)
- New workarounds for Panther Lake (Tejas)
- Fix VF resume errors (Satyanarayana)
- Fix workaround infra skipping some workarounds dependent on engine
initialization (Tvrtko)
- Improve per-IP descriptors (Gustavo)
- Add more error injections to probe sequence (Francois)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ilc5jvtyaoyi6woyhght5a6sw5jcluiojjueorcyxbynrcpcjp@mw2mi6rd6a7l
Cross-subsystem Changes:
base:
- component: Provide helper to query bound status
fbdev:
- fbtft: Remove access to page->index
Core Changes:
- Fix usage of logging macros in several places
gem:
- Add test function for imported dma-bufs and use it in core and helpers
- Avoid struct drm_gem_object.import_attach
tests:
- Fix lockdep warnings
ttm:
- Add helpers for TTM shrinker
Driver Changes:
adp:
- Add support for Apple Touch Bar displays on M1/M2
amdxdna:
- Fix interrupt handling
appletbdrm:
- Add support for Apple Touch Bar displays on x86
bridge:
- synopsys: Add HDMI audio support
- ti-sn65dsi83: Support negative DE polarity
ipu-v3:
- Remove unused code
nouveau:
- Avoid multiple -Wflex-array-member-not-at-end warnings
panthor:
- Fix CS_STATUS_ defines
- Improve locking
rockchip:
- analogix_dp: Add eDP support
- lvds: Improve logging
- vop2: Improve HDMI mode handling; Add support for RK3576
- Fix shutdown
- Support rk3562-mali
xe:
- Use TTM shrinker
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmfJnNcACgkQaA3BHVML
eiNk/QgArbk5nWCS/Wbn/LtLUh5rdIEj6hUdTUurwbKb1TWM4UKTywU9ZjcoOohx
vcwD8QykjnfGDQqSx6uiQM27TQoyFucSgkLyp8asyzYOKqIaaIdvsdEPuu9LKnIw
jVcCDnoc5sQ1OjMLfTzcod4M22amL+fdcWjKXWJvHKuHfsLNY5ppPVxEmTeqiOcR
fnJ2Dlpi9Vkyft+j1begmm9PGTphWedu3xfkUdIR0o4t8ruEvuBq5xm55gg/lBo5
7mdZpqdsRtw+U9oowv17XHRVcjxJEDhGAgO21zW5FhP3PU6Sasgpap9iNX3IbTDj
6426osJOFCvqleQJOimc8SL20qf4mQ==
=62oM
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2025-03-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.15:
Cross-subsystem Changes:
base:
- component: Provide helper to query bound status
fbdev:
- fbtft: Remove access to page->index
Core Changes:
- Fix usage of logging macros in several places
gem:
- Add test function for imported dma-bufs and use it in core and helpers
- Avoid struct drm_gem_object.import_attach
tests:
- Fix lockdep warnings
ttm:
- Add helpers for TTM shrinker
Driver Changes:
adp:
- Add support for Apple Touch Bar displays on M1/M2
amdxdna:
- Fix interrupt handling
appletbdrm:
- Add support for Apple Touch Bar displays on x86
bridge:
- synopsys: Add HDMI audio support
- ti-sn65dsi83: Support negative DE polarity
ipu-v3:
- Remove unused code
nouveau:
- Avoid multiple -Wflex-array-member-not-at-end warnings
panthor:
- Fix CS_STATUS_ defines
- Improve locking
rockchip:
- analogix_dp: Add eDP support
- lvds: Improve logging
- vop2: Improve HDMI mode handling; Add support for RK3576
- Fix shutdown
- Support rk3562-mali
xe:
- Use TTM shrinker
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306130700.GA485504@linux.fritz.box
Add SVM init / close / fini to faulting VMs. Minimual implementation
acting as a placeholder for follow on patches.
v2:
- Add close function
v3:
- Better commit message (Thomas)
- Kernel doc (Thomas)
- Update chunk array to be unsigned long (Thomas)
- Use new drm_gpusvm.h header location (Thomas)
- Newlines between functions in xe_svm.h (Thomas)
- Call drm_gpusvm_driver_set_lock in init (Thomas)
v6:
- Only compile if CONFIG_DRM_GPUSVM selected (CI, Lucas)
v7:
- Only select CONFIG_DRM_GPUSVM if DEVICE_PRIVATE (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-10-matthew.brost@intel.com
Rather than relying on the TTM watermark accounting add a shrinker
for xe_bos in TT or system memory.
Leverage the newly added TTM per-page shrinking and shmem backup
support.
Although xe doesn't fully support WONTNEED (purgeable) bos yet,
introduce and add shrinker support for purgeable ttm_tts.
v2:
- Cleanups bugfixes and a KUNIT shrinker test.
- Add writeback support, and activate if kswapd.
v3:
- Move the try_shrink() helper to core TTM.
- Minor cleanups.
v4:
- Add runtime pm for the shrinker. Shrinking may require an active
device for CCS metadata copying.
v5:
- Separately purge ghost- and zombie objects in the shrinker.
- Fix a format specifier - type inconsistency. (Kernel test robot).
v7:
- s/long/s64/ (Christian König)
- s/sofar/progress/ (Matt Brost)
v8:
- Rebase on Xe KUNIT update.
- Add content verifying to the shrinker kunit test.
- Split out TTM changes to a separate patch.
- Get rid of multiple bool arguments for clarity (Matt Brost)
- Avoid an error pointer dereference (Matt Brost)
- Avoid an integer overflow (Matt Auld)
- Address misc review comments by Matt Brost.
v9:
- Fix a compliation error.
- Rebase.
v10:
- Update to new LRU walk interface.
- Rework ghost-, zombie and purged object shrinking.
- Rebase.
v11:
- Use additional TTM helpers.
- Honor __GFP_FS and __GFP_IO
- Rebase.
v13:
- Use ttm_tt_setup_backup().
v14:
- Don't set up backup on imported bos.
v15:
- Rebase on backup interface changes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-7-thomas.hellstrom@linux.intel.com
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
-----BEGIN PGP SIGNATURE-----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=WDS6
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-02-24' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/m3gbuh32wgiep43i4zxbyhxqbenvtgvtao5sczivlasj7tikwv@dmlba4bfg2ny
A new hardware feature first introduced in PVC gives capability to
periodically sample EU stall state and record counts for different stall
reasons, on a per IP basis, aggregate across all EUs in a subslice and
record the samples in a buffer in each subslice. Eventually, the aggregated
data is written out to a buffer in the memory. This feature is also
supported in XE2 and later architecture GPUs.
Use an existing IOCTL - DRM_IOCTL_XE_OBSERVATION as the interface into the
driver from the user space to do initial setup and obtain a file descriptor
for the EU stall data stream. Input parameter to the IOCTL is a struct
drm_xe_observation_param in which observation_type should be set to
DRM_XE_OBSERVATION_TYPE_EU_STALL, observation_op should be
DRM_XE_OBSERVATION_OP_STREAM_OPEN and param should point to a chain of
drm_xe_ext_set_property structures in which each structure has a pair of
property and value. The EU stall sampling input properties are defined in
drm_xe_eu_stall_property_id enum.
With the file descriptor obtained from DRM_IOCTL_XE_OBSERVATION, user space
can enable and disable EU stall sampling with the IOCTLs:
DRM_XE_OBSERVATION_IOCTL_ENABLE and DRM_XE_OBSERVATION_IOCTL_DISABLE.
User space can also call poll() to check for availability of data in the
buffer. The data can be read with read(). Finally, the file descriptor
can be closed with close().
v11: Changed a couple of variables in struct eu_stall_open_properties
from unsigned int to int.
v10: Use extension number while parsing chain of extensions.
Remove function description for static functions.
Move code around as per review feedback.
v9: Changed some u32 to unsigned int.
Moved some code around as per review feedback from v8.
v8: Used div_u64 instead of / to fix 32-bit build issue.
Changed copyright year in xe_eu_stall.c/h to 2025.
v7: Renamed input property DRM_XE_EU_STALL_PROP_EVENT_REPORT_COUNT
to DRM_XE_EU_STALL_PROP_WAIT_NUM_REPORTS to be consistent with
OA. Renamed the corresponding internal variables.
Fixed some commit messages based on review feedback.
v6: Change the input sampling rate to GPU cycles instead of
GPU cycles multiplier.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb707a27975c33e4a912b9839b023acb7a1f9c90.1740533885.git.harish.chegondi@intel.com
GuC provides support to read engine counters to calculate the
engine activity. KMD exposes two counters via the PMU interface to
calculate engine activity
Engine Active Ticks(engine-active-ticks) - active ticks of engine
Engine Total Ticks (engine-total-ticks) - total ticks of engine
Engine activity percentage can be calculated as below
Engine activity % = (engine active ticks/engine total ticks) * 100.
v2: fix cosmetic review comments
add forcewake for gpm_ts (Umesh)
v3: fix CI hooks error
change function parameters and unpin bo on error
of allocate_activity_buffers
fix kernel-doc (Umesh)
use engine activity (Umesh, Lucas)
rename xe_engine_activity to xe_guc_engine_*
fix commit message to use engine activity (Lucas, Umesh)
v4: add forcewake in PMU layer
v5: fix makefile
use drmm_kcalloc instead of kmalloc_array
remove managed bo
skip init for VF
fix cosmetic review comments (Michal)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224053903.2253539-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This patch introduces 2 PXP debugfs entries:
- info: prints the current PXP status and key instance
- terminate: simulate a termination interrupt
The first one is useful for debug, while the second one can be used for
testing the termination flow.
v2: move the info prints inside the lock (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-13-daniele.ceraolospurio@intel.com
PXP requires submissions to the HW for the following operations
1) Key invalidation, done via the VCS engine
2) Communication with the GSC FW for session management, done via the
GSCCS.
Key invalidation submissions are serialized (only 1 termination can be
serviced at a given time) and done via GGTT, so we can allocate a simple
BO and a kernel queue for it.
Submissions for session management are tied to a PXP client (identified
by a unique host_session_id); from the GSC POV this is a user-accessible
construct, so all related submission must be done via PPGTT. The driver
does not currently support PPGTT submission from within the kernel, so
to add this support, the following changes have been included:
- a new type of kernel-owned VM (marked as GSC), required to ensure we
don't use fault mode on the engine and to mark the different lock
usage with lockdep.
- a new function to map a BO into a VM from within the kernel.
v2: improve comments and function name, remove unneeded include (John)
v3: fix variable/function names in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-3-daniele.ceraolospurio@intel.com
As the first step towards adding PXP support, hook in the PXP init
function, allocate the PXP structure and initialize the KCR register to
allow PXP HWDRM sessions.
v2: remove unneeded includes, free PXP memory on error (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-2-daniele.ceraolospurio@intel.com
Backmerge drm-next to get the common APIs and refactors as well as
getting the display changes from i915 in xe so the probe order can be
improved.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The Makefile for xe asks us to keep the lists of object files sorted:
# Please keep these build lists sorted!
Reshuffle the lists into the correct sort order. That was done by
filtering each unsorted list through 'LC_ALL=C sort'.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115140812.20799-1-gustavo.sousa@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Boot Survivability is a software based workflow for recovering a system
in a failed boot state. Here system recoverability is concerned with
recovering the firmware responsible for boot.
This is implemented by loading the driver with bare minimum (no drm card)
to allow the firmware to be flashed through mei-gsc and collect telemetry.
The driver's probe flow is modified such that it enters survivability mode
when pcode initialization is incomplete and boot status denotes a failure.
In this mode, drm card is not exposed and presence of survivability_mode
entry in PCI sysfs is used to indicate survivability mode and
provide additional information required for debug
This patch adds initialization functions and exposes admin
readable sysfs entries
The new sysfs will have the below layout
/sys/bus/.../bdf
├── survivability_mode
v2: reorder headers
fix doc
remove survivability info and use mode to display information
use separate function for logging survivability information
for critical error (Rodrigo)
v3: use for loop
use dev logs instead of drm
use helper function for aux history(Rodrigo)
remove unnecessary error check of greater than max_scratch
as we are reading only 3 bit
v4: fix checkpatch warnings
fix space (Rodrigo)
rename register
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Acked-by: Ashwin Kumar Kulkarni <ashwin.kumar.kulkarni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128095632.1294722-2-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The CMTG is a timing generator that runs in parallel with transcoders
timing generators and can be used as a reference for synchronization.
We have observed that we are inheriting from GOP a display configuration
with the CMTG enabled. Because our driver doesn't currently implement
any CMTG sequences, the CMTG ends up still enabled after our driver
takes over.
We need to make sure that the CMTG is not enabled if we are not going to
use it. For that, let's add a partial implementation in our driver that
only cares about disabling the CMTG if it was found enabled during
initial hardware readout. In the future, we can also implement sequences
for using the CMTG if that becomes a needed feature.
For now, we only deal with cases when it is possible to disable the CMTG
without requiring a modeset. For earlier display versions, we simply
skip if we find the CMTG enabled and we can't disable it without a
proper modeset. In the future, we need to properly handle that case.
v2:
- DG2 does not have the CMTG. Update HAS_CMTG() accordingly.
- Update logic to force disabling of CMTG only for initial commit.
v3:
- Add missing changes for v2 that were staged but not committed.
v4:
- Avoid if/else duplication in intel_cmtg_dump_state() by using "n/a"
for CMTG B enabled/disabled string for platforms without it. (Jani)
- Prefer intel_cmtg_readout_hw_state() over intel_cmtg_readout_state().
(Jani)
- Use display struct instead of i915 as first parameter for
TRANS_DDI_FUNC_CTL2(). (Jani)
- Fewer continuation lines in variable declaration/initialization for
better readability. (Jani)
- Coding style improvements. (Jani)
- Use drm_dbg_kms() instead of drm_info() for logging the disabling
of the CMTG.
- Make struct intel_cmtg_state entirely private to intel_cmtg.c.
v5:
- Do the disable sequence as part of the sanitization step after
hardware readout instead of initial modeset commit. (Jani)
- Adapt to commit 1513358246 ("drm/i915/display: convert global state
to struct intel_display") by using a display struct instead of i915
as argument for intel_atomic_global_obj_init().
v6:
- Do not track CMTG state as a global state. (Ville)
- Simplify the driver logic by only disabling the CMTG only on cases
when a modeset is not required. (Ville)
v7:
- Remove the call to drm_WARN_ON() when checking
intel_cmtg_disable_requires_modeset() and use a FIXME in the comment
instead.
- Remove the !HAS_CMTG() guard from intel_cmtg_get_config(), which is
static and its caller is already protected by that same condition.
- Also take the opportunity to put some Bspec references in the commit
trailers section.
v8:
- Use HAS_TRANSCODER() instead of intel_crtc_for_pipe(). (Ville)
- Ensure transcoder power well is enabled before reading
TRANS_DDI_FUNC_CTL2. (Ville)
Bspec: 68915, 49262
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124173956.46534-1-gustavo.sousa@intel.com
Basic PMU enabling patch. Setup the basic framework
for adding events.
Based on previous versions by Bommu Krishnaiah, Aravind Iddamsetty and
Riana Tauro, using i915 and rapl as reference implementations.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124050411.2189060-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add helpers to calculate the necessary parameters for configuring the
HDMI PLL for SNPS MPLLB and C10 PHY.
The pll parameters are computed for desired pixel clock, curve data
and other inputs used for interpolation and finally stored in the
pll_state.
Currently the helper is used to compute PLLs for DG2 SNPS PHY.
Support for computing Plls for C10 PHY is added in subsequent patches.
v2:
-Used kernel types instead of C99 types. (Jani)
-Fixed styling issues and renamed few variables to more meaningful
names. (Jani)
-Added Xe make file changes. (Jani)
-Fixed build errors reported by kernel test robot
v3:
-Renamed helper to align with file name. (Jani)
v4:
-Removed erroraneous comment, and added Bspec# as part of trailer. (Suraj)
-Fixed warning flagged by kernel test robot.
Bspec: 54032
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-2-ankit.k.nautiyal@intel.com
The purpose of the GuC Buffer Cache is to maintain a set ofreusable
buffers that could be used while sending some of the CTB H2G actions
that require separate buffer with indirect data. Currently only few
PF actions need this so initialize it only when running as a PF.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-9-michal.wajdeczko@intel.com
The __to_intel_display() generics require the definition of struct
drm_i915_private i.e. inclusion of i915_drv.h. Add
intel_display_conversion.c with a __i915_to_display() function to do the
conversion without the intel_display_conversion.h having an implicit
dependency on i915_drv.h.
The long term goal is to remove __to_intel_display() and the
intel_display_conversion.[ch] files altoghether, and this is merely a
transitional step to make the dependencies on i915_drv.h explicit.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/39e99b765b8c1a05d001659c39686a661ac268e2.1732104170.git.jani.nikula@intel.com
The Battlemage (BMG) discrete graphics card supports the Platform,
Monitoring Technology (PMT) feature directly on the primary PCI device.
Utilize the PMT callback API to add support for the BMG devices.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203153639.2982162-1-michael.j.ruhl@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
To properly support VF Save/Restore procedure, fixups need to be
applied after PF driver finishes its part of VF Restore. The fixups
are required to adjust the ongoing execution for a hardware switch
that happened, because some GFX resources are not fully virtualized,
and assigned to a VF as range from a global pool. The VF on which
a VM is restored will often have different ranges provisioned than
the VF on which save process happened. Those resource fixups are
applied by the VF driver within a restored VM.
A VF driver gets informed that it was migrated by receiving an
interrupt from each GuC. The interrupt assigned for that purpose
is "GUC SW interrupt 0". Seeing that fields set from within the
irq handler should be the trigger for fixups.
The VF can safely do post-migration fixups on resources associated
to each GuC only after that GuC issued the MIGRATED interrupt.
This change introduces a worker to be used for post-migration fixups,
and a mechanism to schedule said worker when all GuCs sent the irq.
v2: renamed and moved functions, updated logged messages, removed
unused includes, used anon struct (Michal)
v3: ordering, kerneldoc, asserts, debug messages,
on_all_tiles -> on_all_gts (Michal)
v4: fixed missing header include
v5: Explained what fixups are, explained which IRQ is used, style
fixes (Michal)
Bspec: 50868
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-2-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Help debugging when LRC timestamp is updated for a exec queue.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104143815.2112272-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add referenced registers defines and list of registers.
Update GuC ADS size allocation to include space for
the lists of error state capture register descriptors.
Then, populate GuC ADS with the lists of registers we want
GuC to report back to host on engine reset events. This list
should include global, engine-class and engine-instance
registers for every engine-class type on the current hardware.
Ensure we allocate a persistent storage for the register lists
that are populated into ADS so that we don't need to allocate
memory during GT resets when GuC is reloaded and ADS population
happens again.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-2-zhanjun.dong@intel.com
Abstract away the nuts and bolts of the SPI vs. PCI ROM
stuff, and hide it all in soc/intel_rom.c so that the
VBT code doesn't have to care about this stuff.
This leaves intel_bios.c with a single codepath that
can focus on the details related to the VBT layout.
This should have no functional changes.
v2: Rebase due to vbt_signature changes
Drop unnecessary cast (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923152453.11230-7-ville.syrjala@linux.intel.com
We've now completely stopped using drm_i915_gem_object in display code
that gets built for xe. Kill off the -Ddrm_i915_gem_object=xe_bo
hack. Good riddance.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0eae2b62b635acafe5dc97dc4b205aaa34ce1e53.1726589119.git.jani.nikula@intel.com
The display code needs to deal with gem objects, and mostly uses struct
drm_i915_gem_object. That's not great, because for xe we need to
redefine it struct xe_bo during build.
Start a common interface using struct drm_gem_object, with separate
implementations for i915 and xe. For starters, convert i9xx_wm.c to use
it.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/df6867523a0b5fdd4eb63f657f545603ae6f6e0b.1726589119.git.jani.nikula@intel.com
To successfully migrate a VM with attached GPU VF we also need to
migrate VF's GuC state. Add necessary functions that interacts with
GuC to save and restore a VF GuC state. We will start using them in
upcoming patches.
Since VF migration requires many more changes in the driver, enable
those functions only under debug config.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913120013.1924-1-michal.wajdeczko@intel.com
This is useful for debug, in case something goes wrong with the GSC. The
info includes the version information and the current value of the HECI1
status registers.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-5-daniele.ceraolospurio@intel.com
A xe_hw_engine_group is a group of hw engines. Two hw engines belong to
the same xe_hw_engine_group if one hw engine cannot make progress while
the other is stuck on a page fault.
Typically, hw engines of the same group share some resources such as EUs,
but this really depends on the hardware configuration of the platforms.
The simple engines partitioning proposed here might be too conservative
but is intended to work for existing platforms. It can be optimized later
if more sets of independent engines are identified.
The hw engine groups are intended to be used in the context of faulting
long-running jobs submissions.
v2: Move to own files, improve error handling (Matt Brost)
v3: Fix build issue reported by CI, improve commit message (Matt Roper)
v4: Fix kernel doc
v5: Add switch case for XE_ENGINE_CLASS_OTHER
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-2-francois.dugast@intel.com
Add skeleton APIs for recording and printing various stats over
debugfs. This currently only added counter types stats which is backed
by atomic_t and wrapped with CONFIG_DRM_XE_STATS so this can be disabled
on production system.
v4: Rebase and other minor fixes (Matt)
v3: s/CONFIG_DRM_XE_STATS/CONFIG_DEBUG_FS(Lucas)
v2: add missing docs
Add boundary checks for stats id and other improvements (Michal)
Fix build when CONFIG_DRM_XE_STATS is disabled(Matt)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sai Gowtham Ch <sai.gowtham.ch@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240810191522.18616-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Use a dummy xe_debugfs_register() if debugfs is not enabled and move all
debugfs-related files under `ifeq ($(CONFIG_DEBUG_FS),y)` in the
Makefile. This is similar to what was done for display in
commit 439987f6f4 ("drm/xe: don't build debugfs files when
CONFIG_DEBUG_FS=n").
This removes the following warning while loading xe with
CONFIG_DEUBG_FS=n:
xe 0000:03:00.0: [drm] Create GT directory failed
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808171121.2484237-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Instead of keep adding more dependencies as WAs are needed in different
places of the driver, just add a rule with all the objects so the code
generation happens before anything else.
While at it, group lines related to wa_oob in the Makefile.
v2: Prefix $(obj) when declaring dependency
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708213041.1734028-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
On BMG-G21 we need to disable fbc due to complications around the WA.
v2:
- Try to handle with i915_drv.h and compat layer. (Rodrigo)
v3:
- For simplicity retreat back to the original design for now.
- Drop the extra \ from the Makefile (Jani)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703124338.208220-4-matthew.auld@intel.com
This involves enabling l2 caching of host side memory access to VRAM
through the CPU BAR. The main fallout here is with display since VRAM
writes from CPU can now be cached in GPU l2, and display is never
coherent with caches, so needs various manual flushing. In the case of
fbc we disable it due to complications in getting this to work
correctly (in a later patch).
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703124338.208220-3-matthew.auld@intel.com
In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.
Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.
v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)
Fixes: 52c2e956dc ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf8 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703164801.2561423-1-ashutosh.dixit@intel.com
This WA requires us to limit media GT frequency requests to a certain
cap value during driver load. Freq limits are restored after load
completes, so perf will not be affected during normal operations.
During normal driver operation, this WA requires dummy writes to media
offset 0x380D8C after every ~63 GGTT writes. This will ensure completion
of the LMEM writes originating from Gunit.
During driver unload(before FLR), the WA requires that we set requested
frequency to the cap value again.
v3: Do not use WA number in function name. Call WA wrapper from xe_device.
Rename some variables, check for locks in the correct function (Rodrigo).
Ensure reset path is also covered for this WA.
v4: Fix BAT failure
v5: Add a function pointer for ggtt_ops (Michal W)
v6: Fix name collision and use static function (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-2-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Need to sync some header include that propagated through
drm-intel-next.
v2: After some changes in drm/drm-next
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add and initialize supported OA data formats for various platforms
(including Xe2). User can request OA data in any supported format.
Bspec: 52198, 60942, 61101
v2: Start 'xe_oa_format_name' enum from 0 (Umesh)
Fix error rewind with OA (Umesh)
v3: Use graphics versions rather than absolute platform names
v4: Add missing kernel doc for struct memebers and enum and other minor
changes (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-4-ashutosh.dixit@intel.com
In Xe, the plan is to support multiple types of perf counter streams (OA is
only one type of these streams). Rather than introduce NxM ioctls for
these (N perf streams with M ioctl's per perf stream), we decide to
multiplex these (N different stream types and the M ops for each of these
stream types) through a single PERF ioctl. This multiplexing is the purpose
of the PERF layer.
In addition to PERF DRM ioctl's, another set of ioctl's on the PERF fd are
defined. These are expected to be common to different PERF stream types and
therefore defined at the PERF layer itself.
v2: Add param_size to 'struct drm_xe_perf_param' (Umesh)
v3: Rename 'enum drm_xe_perf_ops' to
'enum drm_xe_perf_ioctls' (Guy Zadicario)
Add DRM_ prefix to ioctl names to indicate uapi names
v4: Add 'enum drm_xe_perf_op' previously missed out (Guy Zadicario)
v5: Squash the ops and PERF layer patches into a single patch (Umesh)
Remove param_size from struct 'drm_xe_perf_param' (Umesh)
v6: Add DRM_XE_PERF_IOCTL_STATUS
v7: Add DRM_XE_PERF_IOCTL_INFO
v8: Fix Copyright years, fix DRM_XE_PERF_TYPE_MAX, move '#include
"xe_perf.h"' to xe_perf.c, add kernel doc (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Guy Zadicario <gzadicario@habana.ai>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-2-ashutosh.dixit@intel.com
Recheck the link state after a passing link training, with a 2 sec delay
to account for cases where the link goes bad following the link training
and the sink doesn't report this via an HPD IRQ.
The delayed work added here will be also used by a later patch after a
failed link training to try to retrain the link with unchanged link
params before reducing the link params.
v2: Don't flush an uninitialized delayed work (on HDMI-only DDI ports).
v3:
- Move the helpers to a new intel_encoder.c file, rename them
accordingly. (Ville)
- Add the work to intel_encoder instead of intel_digital_port.
- Call the encoder specific link check function via an encoder hook.
- Flush the link check work during encoder destroy from
intel_dp_encoder_flush_work().
- Flush the link check work during encoder suspend as well.
v4: Call intel_encoder_link_check_init() with a valid encoder pointer.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610181428.2955658-1-imre.deak@intel.com
