bochs_pci_probe() allocates the DRM device with devm_drm_dev_alloc(),
which registers a devres action to drop the initial DRM device reference
on driver detach or probe failure.
The error path currently calls drm_dev_put() manually. If probe then
returns an error, devres will run the registered release action and put
the same device again, after the first put may already have released it.
Return the probe error directly and let devres own the final put.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Fixes: 04826f5886 ("drm/bochs: Allocate DRM device in struct bochs_device")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424123506.32275-1-mhun512@gmail.com
This driver is attached to a ~2000x80 screen, which is a lot more than
a single page. This causes out of memory errors in some rare cases.
Reported-by: soopyc <cassie@soopy.moe>
Closes: https://github.com/t2linux/fedora/issues/51
Signed-off-by: Sasha Finkelstein <k@chaosmail.tech>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 0670c2f56e ("drm/tiny: add driver for Apple Touch Bars in x86 Macs")
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://patch.msgid.link/20260420-x86-tb-vmalloc-v1-1-7757ff657223@chaosmail.tech
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix
-----BEGIN PGP SIGNATURE-----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=WXJa
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"These are the regular fixes that have built up over last couple of
weeks, all pretty minor and spread all over.
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix"
* tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
MAINTAINERS: split hisilicon maintenance and add Yongbang Shi for hibmc-drm matainers
drm/v3d: Reject empty multisync extension to prevent infinite loop
drm/panel: visionox-rm69299: Make use of prepare_prev_first
drm/drm_atomic: duplicate colorop states if plane color pipeline in use
drm/nouveau: fix nvkm_device leak on aperture removal failure
hv: Select CONFIG_SYSFB only for CONFIG_HYPERV_VMBUS
dma-fence: Silence sparse warning in dma_fence_describe
drm/bridge: dw-mipi-dsi: Fix bridge leak when host attach fails
drm/arcpgu: fix device node leak
drm/panthor: Fix outdated function documentation
drm/panthor: Extend VM locked region for remap case to be a superset
dma-buf: fix UAF in dma_buf_put() tracepoint
drm/bridge: stm_lvds: Do not fail atomic_check on disabled connector
drm/atomic: Increase timeout in drm_atomic_helper_wait_for_vblanks()
This function gets a device_node reference via
of_graph_get_remote_port_parent() and stores it in encoder_node, but never
puts that reference. Add it.
There used to be a of_node_put(encoder_node) but it has been removed by
mistake during a rework in commit 3ea66a794f ("drm/arc: Inline
arcpgu_drm_hdmi_init").
Fixes: 3ea66a794f ("drm/arc: Inline arcpgu_drm_hdmi_init")
Cc: stable@vger.kernel.org
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260402-drm-arcgpu-fix-device-node-leak-v2-1-d773cf754ae5@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Replace simple-display helpers with regular atomic helpers. Store the
pipeline elements in struct panel_mipi_dbi_device and initialize them as
part of probing the device. Use mipi-dbi's existing helpers and initializer
macros where possible.
Effectively open-codes the modesetting code in the initializer helpers
of mipi-dbi and simple-display. Panel-mipi-dbi requires a custom helper
for CRTC enablement, and non-freeing cleanup of the pipeline.
v2:
- fix connector initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Tested-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-11-tzimmermann@suse.de
Replace simple-display helpers with regular atomic helpers. Store the
pipeline elements in struct mi0283qt_device and initialize them as part
of probing the device. Use mipi-dbi's existing helpers and initializer
macros where possible.
Effectively open-codes the modesetting code in the initializer helpers
of mipi-dbi and simple-display. Mi0283qt requires a custom helper for
CRTC enablement, and non-freeing cleanup of the pipeline.
v3:
- set dbi variable (David)
v2:
- fix connector initialization
- fix coding style
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-10-tzimmermann@suse.de
Replace simple-display helpers with regular atomic helpers. Store the
pipeline elements in struct ili9486_device and initialize them as part
of probing the device. Use mipi-dbi's existing helpers and initializer
macros where possible.
Effectively open-codes the modesetting code in the initializer helpers
of mipi-dbi and simple-display. Ili9486 requires a custom helper for
CRTC enablement, and non-freeing cleanup of the pipeline.
v3:
- set ili9486 variable (David)
v2:
- fix connector initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-9-tzimmermann@suse.de
Replace simple-display helpers with regular atomic helpers. Store the
pipeline elements in struct ili9341_device and initialize them as part
of probing the device. Use mipi-dbi's existing helpers and initializer
macros where possible.
Effectively open-codes the modesetting code in the initializer helpers
of mipi-dbi and simple-display. Ili9341 requires a custom helper for
CRTC enablement, and non-freeing cleanup of the pipeline.
v3:
- set dbi variable (David)
v2:
- fix connector initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-8-tzimmermann@suse.de
Replace simple-display helpers with regular atomic helpers. Store the
pipeline elements in struct ili9225_device and initialize them as part
of probing the device. Use mipi-dbi's existing helpers and initializer
macros where possible.
Effectively open-codes the modesetting code in the initializer helpers
of mipi-dbi and simple-display. Ili9225 requires custom helpers for
various pipeline elements, and non-freeing cleanup of the pipeline.
v3:
- set dbi variable (David)
v2:
- fix connector initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Tested-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-7-tzimmermann@suse.de
Replace simple-display helpers with regular atomic helpers. Store the
pipeline elements in struct ili9163_device and initialize them as part
of probing the device. Use mipi-dbi's existing helpers and initializer
macros where possible.
Effectively open-codes the modesetting code in the initializer helpers
of mipi-dbi and simple-display. Ili9163 requires a custom helper for
CRTC enablement, and non-freeing cleanup of the pipeline.
v3:
- set dbi variable (David)
v2:
- fix connector initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-6-tzimmermann@suse.de
Replace simple-display helpers with regular atomic helpers. Store the
pipeline elements in struct hx8357d_device and initialize them as part
of probing the device. Use mipi-dbi's existing helpers and initializer
macros where possible.
Effectively open-codes the modesetting code in the initializer helpers
of mipi-dbi and simple-display. Hx8357d requires a custom helper for
CRTC enablement, and non-freeing cleanup of the pipeline.
v2:
- fix connector initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-5-tzimmermann@suse.de
Use drm_atomic_helper_commit_tail_rpm() as commit tail to update the
plane after enabling the CRTC. Then remove the plane-update code from
mipi_dbi_enable_flush() and inline the remaining backlight code where
necessary.
Mipi-dbi's current commit tail drm_atomic_helper_commit_tail() first
updates the plane and then enables the CRTC. But the CRTC enablement
includes power management that prevents the initial plane update from
working. Hence, each mipi-dbi driver includes a plane update in their
CRTC enablement; in the form of mipi_dbi_enable_flush() or custom code.
Using drm_atomic_helper_commit_tail_rpm() enables the CRTC before any
plane updates. Hence the additional plane update can be removed from
mipi_dbi_enable_flush() and a number of drivers.
This leaves backlight_enable() in the helper, which can now be inlined
into affected drivers. Drivers now enable the CRTC plus an optional
backlight and then automatically update the plane.
In the case of disabling the display, drm_atomic_helper_commit_tail_rpm()
only disables the CRTC without touching the plane at all. Mipi-dbi's
mipi_dbi_pipe_disable() already contains the necessary logic.
Removing the plane update from the CRTC enablement will also help with
converting mipi-dbi from simple-pipe helpers to regular atomic helpers.
v3:
- st7586: remove unused variable
v2:
- ili9225: remove unused variables (David)
- st7586: remove unused variables (David)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-2-tzimmermann@suse.de
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The function devm_drm_dev_alloc() returns a pointer error upon failure
not NULL. Change null check to pointer error check.
Detected by Smatch:
drivers/gpu/drm/tiny/sharp-memory.c:549 sharp_memory_probe() error:
'smd' dereferencing possible ERR_PTR()
Fixes: b8f9f21716 ("drm/tiny: Add driver for Sharp Memory LCD")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260216040438.43702-1-ethantidmore06@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmkaT2IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGnakIAIq6O35+abAlDGe7
n8IwX/4hwDJ9Ol2vddg6jTdio3szSlvcXRAyijkG35etLap+i+Q78Q9H1fRcQ8CF
5t9kfs5oCVWEDlsHMI+Q38vYB3tWikaIUIuao6pH5U50fsA0KM/287TLYdzvmBsK
gy0BHoZhl++xdMsD2HNwt08RrK/IyY+Zp9i7pKhcsxJiJCgy8nq5ZxhmRPbqTKNc
IqIBPzG+UYcOd88Iz377Ax+TnzWaTpwyvfaiU8DVFMN0FeENdk1FY8ClYfpYxCDH
Pm5NzL/f54VtdZ3aL1fKmYwWN7WFJT4FH3l6DOvtCc+Gx3KW1a3Y508CbqYBXvgY
QV4oH4Y=
=iSoY
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc6' into drm-next
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
The DRM_GEM_SHMEM_HELPER helper requires MMU enabled because it uses
vmf_insert_pfn() in its mmap implementation. On NOMMU configurations
(e.g. some RISC-V randconfig builds), this symbol is unavailable and
selecting DRM_GEM_SHMEM_HELPER causes a modpost undefined reference:
ERROR: modpost: "vmf_insert_pfn" [drivers/gpu/drm/drm_shmem_helper.ko] undefined!
Normally, Kconfig prevents this helper from being selected when
CONFIG_MMU=n. However, in some randconfig builds (such as those used by
0day CI), select statements can override unmet dependencies, triggering
the issue.
Add an explicit dependency on MMU to DRM_PIXPAPER to prevent this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510280213.0rlYA4T3-lkp@intel.com/
Fixes: 0c4932f6dd ("drm/tiny: pixpaper: Fix missing dependency on DRM_GEM_SHMEM_HELPER")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251028-bar-v1-1-edfbd13fafff@gmail.com
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
Use a vblank timer to simulate the vblank interrupt. The DRM vblank
helpers provide an implementation on top of Linux' hrtimer. Cirrus-qemu
enables and disables the timer as part of the CRTC. The atomic_flush
callback sets up the event. Like vblank interrupts, the vblank timer
fires at the rate of the display refresh.
Most userspace limits its page flip rate according to the DRM vblank
event. Cirrus-qemu' virtual hardware does not provide vblank interrupts,
so DRM sends each event ASAP. With the fast access times of virtual display
memory, the event rate is much higher than the display mode's refresh
rate; creating the next page flip almost immediately. This leads to
excessive CPU overhead from even small display updates, such as moving
the mouse pointer.
This problem affects cirrus-qemu and all other virtual displays. See [1]
for a discussion in the context of hypervdrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/SN6PR02MB415702B00D6D52B0EE962C98D46CA@SN6PR02MB4157.namprd02.prod.outlook.com/ # [1]
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20251008121450.227997-1-tzimmermann@suse.de
Use a vblank timer to simulate the vblank interrupt. The DRM vblank
helpers provide an implementation on top of Linux' hrtimer. Bochs
enables and disables the timer as part of the CRTC. The atomic_flush
callback sets up the event. Like vblank interrupts, the vblank timer
fires at the rate of the display refresh.
Most userspace limits its page flip rate according to the DRM vblank
event. Bochs' virtual hardware does not provide vblank interrupts, so
DRM sends each event ASAP. With the fast access time of virtual display
memory, the event rate is much higher than the display mode's refresh
rate; creating the next page flip almost immediately. This leads to
excessive CPU overhead from even small display updates, such as moving
the mouse pointer.
This problem affects bochs and all other virtual displays. See [1] for
a discussion in the context of hypervdrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/SN6PR02MB415702B00D6D52B0EE962C98D46CA@SN6PR02MB4157.namprd02.prod.outlook.com/ # [1]
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20251008093931.19138-1-tzimmermann@suse.de
The driver uses drm_gem_shmem_prime_import_no_map() and
drm_gem_shmem_dumb_create(), but the Kconfig currently selects
DRM_GEM_DMA_HELPER instead of DRM_GEM_SHMEM_HELPER. This causes
link failures when DRM_GEM_SHMEM_HELPER is not enabled.
Select DRM_GEM_SHMEM_HELPER to fix the build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509220320.gfFZjmyg-lkp@intel.com/
Fixes: c9e70639f5 ("drm: tiny: Add support for Mayqueen Pixpaper e-ink panel")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250922-bar-v1-1-b2a1f54ace82@gmail.com
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch kernel control flow integrity (kCFI) issues at
build time, there is an instance in the new tiny DRM pixpaper driver:
drivers/gpu/drm/tiny/pixpaper.c:982:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_crtc *, const struct drm_display_mode *)' with an expression of type 'int (struct drm_crtc *, const struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
982 | .mode_valid = pixpaper_mode_valid,
| ^~~~~~~~~~~~~~~~~~~
While 'int' and 'enum drm_mode_status' are ABI compatible, hence no
regular warning from -Wincompatible-function-pointer-types, the mismatch
will trigger a kCFI violation when pixpaper_mode_valid() is called
indirectly.
Update the return type of pixpaper_mode_valid() to be
'enum drm_mode_status' to clear up the warning and kCFI violation.
Fixes: c9e70639f5 ("drm: tiny: Add support for Mayqueen Pixpaper e-ink panel")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250908-drm-pixpaper-fix-mode_valid-return-type-v1-1-705ceaf03757@kernel.org
The DRM subsystem has a set of preferred, prefixed logging functions
(drm_info, drm_warn, drm_err) which improve debuggability by including
the driver and function name in the log output.
As part of the ongoing effort to modernize logging calls,
convert a dev_err() call in the bochs hardware initialization
function to its drm_err() equivalent.
This work was suggested by the DRM TODO list.
Signed-off-by: Leander Kieweg <kieweg.leander@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250818113530.187440-1-kieweg.leander@gmail.com
Introduce a DRM driver for the Mayqueen Pixpaper e-ink display panel,
which is controlled via SPI. The driver supports a 122x250 resolution
display with XRGB8888 format.
Also, add a MAINTAINERS entry for the Pixpaper driver.
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-v5-3-d77c678c4ae3@gmail.com
Use DRM's shadow-plane helper to map and access the GEM object's buffer
within kernel address space. Encapsulates the vmap logic in the GEM-DMA
helpers.
The sharp-memory driver currently reads the vaddr field from the GME
buffer object directly. This only works because GEM code 'automagically'
sets vaddr.
Shadow-plane helpers perform the same steps, but with correct abstraction
behind drm_gem_vmap(). The shadow-plane state provides the buffer address
in kernel address space and the format-conversion state.
v2:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250627152327.8244-1-tzimmermann@suse.de
Use DRM's shadow-plane helper to map and access the GEM object's buffer
within kernel address space. Encapsulates the vmap logic in the GEM-DMA
helpers.
The repaper driver currently reads the vaddr field from the GME buffer
object directly. This only works because GEM code 'automagically' sets
vaddr.
Shadow-plane helpers perform the same steps, but with correct abstraction
behind drm_gem_vmap(). The shadow-plane state provides the buffer address
in kernel address space and the format-conversion state.
v2:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250627152422.8399-1-tzimmermann@suse.de
Add drm_panic module for bochs drm so that panic screen can be displayed
on panic.
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250613132023.106946-1-ryasuoka@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmg2aVAACgkQDHTzWXnE
hr6DjhAApr2fZjugU3EmpsARdcIWgEd+X65R97ef7RlUGqBKm2joSwZGOhH0oBsG
9WyO92Qzu6XMe8OibKqY4D2hir9UPz5v+uEWe3q9CzZGbNyAwyVRjVkaKpnI9upv
1dmHFI7HgPu6qbz6RfPIfgALBLXvVXMaQ4+ZgN/cLtZFa+OLAV5ByqWsRPPXZFb0
F/pQGQ4ursglfA+LH3SVPfnTN53lu93IlM5/Os9OQQGj+44w94zQ6DCm7CY1AugH
n+RM/0Yv7WaoF1ByeOtq4FcrmLRrd+ozsvITbRZqhOx7zS/mhP8LRzAwgKWOYzSh
puKunyQiSdHR7FSqSi8uyY3YumcLWNa/17LMKoTf+KqweJbKGE7RVBuFBn6WUdPb
AYHZrSB4USAeyahdrrsU+q7ltu5urs5ckpbXsRurMiaUz/BLim1PIm3N5FDLPY7B
PD1n1FcMUv3CmJT5Y+aNIQgmf1/dETESRTSAgSoOo3gNp6jdRCYqSuWIBsppibWT
26+tyz0/FGhE50QviHzg0Sv+jd/g93fN6snNlV8wNFMviq3bC69Toa+y3qJ5e7UC
/42R7nCWdkCZJfr6E67rOaahe9TDV/LXLqPErwptOkdK8sMchaIgF+deybgTtTi/
zGRBfjLvb5ocYBmPbeGX4mtXNRpyZ3o9I0QUyGUO4zMwFXmFwn0=
=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
We start to have support many Sitronix displays in the tiny directory,
and we expect more to come.
Move them to their own subdirectory.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250512-sitronix-v3-1-bbf6cc413698@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Since commit 559358282e ("drm/fb-helper: Don't use the preferred depth
for the BPP default"), RGB565 displays such as the CFAF240320X no longer
render correctly: colors are distorted and the content is shown twice
horizontally.
This regression is due to the fbdev emulation layer defaulting to 32 bits
per pixel, whereas the display expects 16 bpp (RGB565). As a result, the
framebuffer data is incorrectly interpreted by the panel.
Fix the issue by calling drm_client_setup_with_fourcc() with a format
explicitly selected based on the display's bits-per-pixel value. For 16
bpp, use DRM_FORMAT_RGB565; for other values, fall back to the previous
behavior. This ensures that the allocated framebuffer format matches the
hardware expectations, avoiding color and layout corruption.
Tested on a CFAF240320X display with an RGB565 configuration, confirming
correct colors and layout after applying this patch.
Cc: stable@vger.kernel.org
Fixes: 559358282e ("drm/fb-helper: Don't use the preferred depth for the BPP default")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250417103458.2496790-1-festevam@gmail.com
cirrus enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417094009.29297-2-phasta@kernel.org
The devm_kzalloc() function returns NULL on failure, not error pointers.
Also printing an error message for kmalloc() failures is against kernel
style so just return -ENOMEM without printing a message. (Kmalloc
already prints a message).
Fixes: 4b35f0f41e ("drm/st7571-i2c: add support for Sitronix ST7571 LCD controller")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/aBHZYgPPPYY-J8Vd@stanley.mountain
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The appletbdrm driver is exclusively for Touch Bars on x86 Intel Macs.
The M1 Macs have a separate driver. So, lets avoid compiling it for
other architectures.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/PN3PR01MB95970778982F28E4A3751392B8B72@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
The newly added driver calls drm_client_setup(), but that is not
always built in:
x86_64-linux-ld: vmlinux.o: in function `st7571_probe':
st7571-i2c.c:(.text+0x7b7119): undefined reference to `drm_client_setup'
Select the appropriate Kconfig symbol.
Fixes: 4b35f0f41e ("drm/st7571-i2c: add support for Sitronix ST7571 LCD controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250428150752.3970145-1-arnd@kernel.org
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
It turns out that there are no platforms that have PCI but don't have an
MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing
kernels for those platforms a lot, and avoids a lot of inadvertent build
regressions.
Add a dependency for CONFIG_PCI and remove all the ones for PCI specific
device drivers that are currently marked not having it.
There are a few platforms that have an optional MMU, but they usually
cannot have PCI at all. The one exception is Coldfire MCF54xx, but this is
mainly for historic reasons, and anyone using those chips should really use
the MMU these days.
Link: https://lore.kernel.org/lkml/a41f1b20-a76c-43d8-8c36-f12744327a54@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20250423202215.3315550-1-arnd@kernel.org
Sitronix ST7571 is a 4bit gray scale dot matrix LCD controller.
The controller has a SPI, I2C and 8bit parallel interface, this
driver is for the I2C interface only.
Reviewed-by: Thomas Zimmermann <tzimmrmann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250423-st7571-v6-2-e9519e3c4ec4@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Due to lack of a proper format specifier, %p4cc was being used instead
of %p4cl for the purpose of printing FourCCs. But the disadvange was
that they were being printed in a reverse order. %p4cl should correct
this issue.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB959783DC6377C4CAB203D7ADB8B52@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
The ofdrm and simpledrm drivers are special as they operate on
externally provided framebuffers. Move them into their own sub-
directory. Will let them share common code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-5-tzimmermann@suse.de
The helper drm_simple_encoder_init() is a trivial helper around
drm_encoder_init() and therefore deprecated. Open-code the function
and remove the dependency.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-3-tzimmermann@suse.de
Remove struct cirrus_primary_plane_state and its helpers, which
are all unused. Use struct drm_shadow_plane_state instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20250328091821.195061-5-tzimmermann@suse.de
Remove internal adjustments to framebuffer format from cirrus-qemu
driver. The driver did this to support higher resolutions by reducing
the per-pixel memory consumption. DRM has a policy of exporting formats
as they are implemented in hardware. So avoid internal adjustments if
possible.
Also remove the call to drm_fb_blit() from cirrus-qemu. The helper
is useful if source and destination format are not known beforehand.
This is not the case for cirrus-qemu.
This change effectively reduces the maximum available resolution to
800x600 at 32 bpp. A maximum scanline pitch of 4095 byte prevents
1024 pixels per scanline at 32 bpp. Higher resolutions are possible
at lower bit depths, but are currently not supported by userspace.
When cirrus-qemu currently reduced the internal bit depth to support
higher resolutions, it trades resolution for bit depth and CPU time.
Converting from 32-bit colors has a significant runtime overhead, as
outlined at [1]. Avoiding color-format adjustments also avoids this
tradeoff.
v2:
- expand commit message (Gerd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/dri-devel/20250325110407.81107-1-tzimmermann@suse.de/ # 1
Link: https://lore.kernel.org/r/20250328091821.195061-4-tzimmermann@suse.de
Implement strict checking of a display mode's minimum scanline
pitch in cirrus_mode_config_mode_valid(). Sort out all modes that
possibly overflow the maximum pitch.
The current validation only tests against a display mode's minimum
requirements for video memory. Only atomic_check later tests against
the pitch limit before programming the framebuffer.
The problem is that user-space compositors do not handle this
gracefully. If atomic_check fails to validate the scanline pitch
and returns an error, the compositor, namely Weston, does nothing
and the display remains stale.
Ruling out display modes that possibly overflow the pitch avoids
this problem. With only 4 MiB of video memory available, this
effectively limits horizontal resolution to 800 pixels. But with
cirrus-qemu being low-end and obsolete, this is probably not an
issue in practice. Better alternatives are available in qemu.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20250328091821.195061-3-tzimmermann@suse.de
Do not set CR1B[6] when programming the pitch. The bit effects VGA
text mode and is not interpreted by qemu. [1] It has no affect on
the scanline pitch.
The scanline bit that is set into CR1B[6] belongs into CR13[7], which
the driver sets up correctly.
This bug goes back to the driver's initial commit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://gitlab.com/qemu-project/qemu/-/blob/stable-9.2/hw/display/cirrus_vga.c?ref_type=heads#L1112 # 1
Fixes: f9aa76a852 ("drm/kms: driver for virtual cirrus under qemu")
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://lore.kernel.org/r/20250328091821.195061-2-tzimmermann@suse.de
