The 8-bit entry of the last MPLL row (594 MHz) doesn't lock reliably on
H6. 4K@60 RGB/YUV444, which is the mode that reaches this entry, doesn't
come up.
Align the value with the vendor driver. Other entries are left alone,
they are used by lower pixel clocks which work fine.
Tested with 4K@60 on a LG TV.
Fixes: 0fb4b858b1 ("drm/sun4i: Add support for H6 HDMI PHY")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/aec9060209473b8176eb43bc7c63c20b21306adf.1785772659.git.jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Two references are leaked every time the display pipeline is walked:
the output port node in sun4i_drv_traverse_endpoints(), which was never
released since the driver was introduced, and each node taken out of
the endpoint fifo in sun4i_drv_probe(), which stopped being released
when the fifo was introduced. The latter is still safe to drop right
after processing, since drm_of_component_match_add() takes its own
reference.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Fixes: 8b11aaface ("drm/sun4i: Implement endpoint parsing using kfifo")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/759c74e3a22b97ca066ef7910ca4b91b852011e6.1785772659.git.jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
sun4i_tcon_of_get_id_from_port() never drops the reference taken by
of_graph_get_remote_endpoint(). The function is not only called during
bind, but also on every mode set through sun8i_r40_tcon_tv_set_mux(),
so the leak accumulates.
Fixes: e8d5bbf7f4 ("drm/sun4i: tcon: get TCON ID and matching engine with remote endpoint ID")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/3f5ec952ad80cb51efebf2fe230df50259041a23.1785772659.git.jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
sun4i_crtc_init() returns plain NULL when layer initialization fails,
while all its other error paths return an error pointer. The only
caller, sun4i_tcon_bind(), checks the result with IS_ERR() and happily
continues with tcon->crtc set to NULL. sun4i_rgb_init() and
sun4i_lvds_init() then dereference it in drm_crtc_mask(), which
oopses.
Return the error pointer instead.
Fixes: dcd215801b ("drm/sun4i: Drop primary layer pointer from sun4i_drv")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/b26a0d427d9dfae9c82e3ca90a67d24d8ece5a28.1785772659.git.jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
sun4i_hdmi_enable() keeps using the same variable after it programmed
the video timing polarity register with it. The leftover TX_CLK, HSYNC
and VSYNC bits are then ORed into the packet control register, where
each nibble selects the packet type sent in one slot.
As a result, slot 0 selects packet type 3 instead of the AVI infoframe
whenever the mode has positive HSYNC polarity, and the TX_CLK bits set
nibbles which the driver never programs.
Assign the packet types instead of ORing them into the stale value.
Fixes: 9ca6bc2460 ("drm/sun4i: hdmi: Move mode_set into enable")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/51ba0918ce016a4b45313d5df1b6ce31b8c8731e.1785772659.git.jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
DSI and LVDS skip output mux setup, so TCON TOP cannot route the selected
mixer. Configure them like other channel 0 outputs.
In practice this matters for D1, where channel 0 TCONs are fed through
TCON TOP. The remaining set_mux implementations only handle TMDS and
return an error for other encoder types, as before.
Fixes: b9b52d2f4a ("drm/sun4i: Add support for D1 TCONs")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/7e9dad9eed2e91a79c4e1202caa8fed7c2427531.1785772659.git.jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The DE3 mixer initialization clears the entire mixer register space. This
also clears VSU_GLOBAL_ALPHA, despite its hardware reset value being 0xff.
The VI scaler uses Video Normal mode for subsampled YUV formats. In this
mode, VSU_GLOBAL_ALPHA provides the scaler output alpha. Leaving the
register at zero causes the scaler to produce fully transparent output.
Set VSU_GLOBAL_ALPHA to 0xff whenever configuring a DE3 or newer VI
scaler. The register is ignored in UI scaling mode.
Fixes: c50519e6db ("drm/sun4i: Add basic support for DE3")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/c48ba85b9e4478d51afde4f36839fd1c1d363b23.1785772659.git.jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Currently, vertical coefficients are selected based on horizontal
scaling, which is wrong. Additionally, chroma coefficients should be
selected based on format subsampling.
Fix all that.
Fixes: b862a648de ("drm/sun4i: Add support for HW scaling to DE2")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/263a4a41442a3c8b072b170256b72658f1b90802.1785772659.git.jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The VI scaler line buffer on V3s can hold 1024 pixels for subsampled
formats, not 2048 as currently claimed. Since coarse horizontal scaling
is engaged only once the source width exceeds that limit, YUV layers
wider than 1024 pixels are passed to the scaler unchanged and the
output is corrupted.
Use the value from the vendor driver.
Fixes: 2586de70c1 ("drm/sun4i: Add VI scaler line size quirk for DE2/DE3")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/75ad4947981f2dc33fd42c05ae0b0cedda7647bd.1785772659.git.jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Back when support for zpos was added in commit 47a05f4a68 ("drm/sun4i:
backend: Add support for zpos"), a custom atomic_check callback was also
added in commit b8f1230dd3 ("drm/sun4i: framebuffer: Add a custom
atomic_check") to have a place to call drm_atomic_normalize_zpos().
Commit 49efffc7fb ("drm: Add drm_mode_config->normalize_zpos boolean")
added drm_atomic_normalize_zpos() to the standard atomic_check function.
Set mode_config.normalize_zpos and drop the custom atomic_check
implementation, which at this point is just a simplified copy of the
standard one. The standard one also checks whether async updates are
valid and updates the self refresh state, but neither feature is
supported by this driver.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260803111319.2836240-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Callers of of_drm_find_panel() and drm_of_find_panel_or_bridge()
receive a pointer with no reference held, creating a window where
the panel device can be unregistered and freed between the lookup
and first use (e.g., drm_panel_prepare()).
Fix the lookup function by acquiring a reference with drm_panel_get()
before returning, under panel_lock. Callers are now responsible for
calling drm_panel_put() when they no longer need the pointer.
For bridge drivers that immediately wrap the panel in a panel_bridge
(which acquires its own reference), release the lookup reference right
after the bridge creation call.
For analogix-anx6345, which stores the panel for direct use, release
the reference in the i2c remove path.
For platform drivers using analogix_dp_core with a component lifecycle
(exynos_dp, rockchip analogix_dp), release the lookup reference in the
platform remove() function. The panel_bridge created during bind() holds
a separate reference that devm cleanup releases after remove() returns.
Also fix devm_drm_of_get_bridge() and drmm_of_get_bridge() in
bridge/panel.c itself, update a second batch of drivers calling
of_drm_find_panel() or drm_of_find_panel_or_bridge() to release the
lookup reference after wrapping the panel in a bridge, and handle the
cases where a panel is found but cannot be used, dropping the reference
immediately in those paths.
Assisted-by: Claude:claude-opus-4-6
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260717-drm_refcount_wiring-v3-3-023900c32e01@redhat.com
When sun4i_backend_init_sat() calls reset_control_deassert() it
increments the deassert_count of the reset controller, and must
pair that with a reset_control_assert() call to decrement it.
In the error path where clk_prepare_enable() fails, the function
returns immediately without calling reset_control_assert(), leaking
the reference count. Other error paths, like the devm_clk_get()
failure, correctly jump to the err_assert_reset label which performs
the missing assert.
Fix the leak by using the existing err_assert_reset label in the
clk_prepare_enable error path instead of returning directly.
Cc: stable@vger.kernel.org
Fixes: 440d2c7b12 ("drm/sun4i: backend: Handle the SAT")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260607030950.83636-1-vulab@iscas.ac.cn
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Simple KMS helper are deprecated since they only add an intermediate
layer between drivers and the atomic modesetting.
This patch removes the dependency on drm simple helpers from sun4i
DRM drivers.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260623-sun4i_simple-v1-1-fa6696df1fad@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
__drm_atomic_helper_connector_hdmi_reset() is typically used to
initialize a newly allocated drm_connector_state when the connector is
using the HDMI helpers, and is being called by the
drm_connector_funcs.reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_connector_state instance, we will need to call
__drm_atomic_helper_connector_hdmi_reset() from both the reset and
atomic_create hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_connector_hdmi_reset() to
__drm_atomic_helper_connector_hdmi_state_init().
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-14-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Replace the 165000000 magic number with the shared constant defined
in the <linux/hdmi.h> header.
The old comment referenced "HDMI <= 1.2" but 165 MHz is actually
the maximum TMDS character rate defined by the HDMI 1.0 spec.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-7-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
The hdmi_colorspace enum was defined to represent the colorspace value
of the HDMI infoframes. It was later used by some HDMI drivers to
express the output format they should be setting up.
During the introduction of the HDMI helpers, it then was used to
represent it in the drm_connector_hdmi_state structure.
However, it's always been somewhat redundant with the DRM_COLOR_FORMAT_*
defines, and now with the drm_output_color_format enum. Let's
consolidate around drm_output_color_format in drm_connector_hdmi_state
to facilitate the current effort to provide a global output format
selection mechanism.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-14-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The sun4i DRM driver deals with DMA constraints in a peculiar way.
Instead of using the actual DMA device in various helpers, it justs
reconfigures the DMA constraints of the virtual display device using
the DMA device's device tree node by calling of_dma_configure().
Turns out of_dma_configure() should only be called from bus code.
Lately this also triggers a big warning through of_iommu_configure()
and ultimately __iommu_probe_device():
late IOMMU probe at driver bind, something fishy here!
Now that the GEM DMA helpers have proper support for allocating
and mapping buffers with a dedicated DMA device, switch over to
it as the proper solution.
The mixer change was tested on a Pine H64 model B. The backend change
was only compile tested. Though I don't expect any issues, help testing
on an older device would be appreciated.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260311094929.3393338-5-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Commit 4636ce93d5 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()")
adds a new helper, which covers fetching a drm_framebuffer's GEM object
and calculating the buffer address for a given plane.
This patch uses this helper to replace our own open coded version of the
same function.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260309165635.1138413-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Three clocks are not being released in devm_regmap_init_mmio() error
path.
Add proper goto and set ret to the error code.
Fixes: 8270249fbe ("drm/sun4i: backend: Create regmap after access is possible")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260226163836.10335-1-ethantidmore06@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Correct the kernel-doc notation, add a missing struct member comment,
and add a missing "Returns:" function comment to eliminate kernel-doc
warnings:
Warning: drivers/gpu/drm/sun4i/sunxi_engine.h:116 Incorrect use of
kernel-doc format: * @mode_set
Warning: drivers/gpu/drm/sun4i/sunxi_engine.h:125 struct member 'mode_set'
not described in 'sunxi_engine_ops'
Warning: drivers/gpu/drm/sun4i/sunxi_engine.h:144 struct member 'list'
not described in 'sunxi_engine'
Warning: drivers/gpu/drm/sun4i/sunxi_engine.h:168 No description found
for return value of 'sunxi_engine_layers_init'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260219215524.468142-1-rdunlap@infradead.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The function drm_atomic_get_plane_state() can return an error pointer
and is not checked for it. Add error pointer check.
Detected by Smatch:
drivers/gpu/drm/sun4i/sun4i_backend.c:496 sun4i_backend_atomic_check() error:
'plane_state' dereferencing possible ERR_PTR()
Fixes: 96180dde23 ("drm/sun4i: backend: Add a custom atomic_check for the frontend")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260217014801.60760-1-ethantidmore06@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Havign a single set of InfoFrame callbacks doesn't provide enough
information to the DRM framework about the InfoFrame types that are
actually supported. Also it's not really future-proof: it provides a way
to program only a single Vendor-Specific frame, however we might need to
support multiple VSIs at the same time (e.g. HDMI vs HDMI Forum
VSIs).
Provide separate sets of callbacks, one per the InfoFrame type.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-6-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
It's not used anymore, so remove it. This allows trully independent
layer state from mixer.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-31-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
This allows to almost completely decouple layer code from mixer. This is
important for DE33.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-29-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Later special plane only driver for DE33 will provide separate
configuration. This change will also help layer driver migrate away from
mixer structure.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-28-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
On DE2 and DE3, UI scalers are located right after VI scalers. So in
order to calculate proper UI scaler base address, number of VI scalers
must be known. In practice, it is same as number of VI channels, but it
doesn't need to be.
Let's make a quirk for this number. Code for configuring channels and
associated functions won't have access to vi_num quirk anymore after
rework for independent planes.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-27-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
They can't be triggered if mixer configuration is properly specified in
quirks. Additionally, number of VI channels won't be available in future
due to rework for DE33 support.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-26-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Determination if FCC unit can be used for VI layer alpha depends on
number of VI channels. This info won't be available anymore in future
to VI layer driver because of DE33 way of allocating planes from same
pool to different mixers.
While order is slightly changed, it doesn't affect anything due to
double buffering of registers. New order keeps related registers
together and quirk separate.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-25-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Now that channel base calculation is straightforward, let's update VI
scaler base calculation to be simpler. At the same time, also introduce
macro to avoid magic numbers.
Note, reason why current magic value and new macro value isn't the same
is because sun8i_channel_base() already introduces offset to channel
registers. Previous value is just the difference to VI scaler registers.
However, new code calculates scaler base from channel base. This is also
easier to understand when looking into BSP driver. Macro value can be
easily found whereas old diff value was not.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-24-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Layer will be more universal, due to DE33 support.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-22-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Till DE33, there were no reason to decouple registers from mixer.
However, with future new plane driver, this will be necessary.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-21-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Layer related peripherals should take layer struct as a input. This
looks cleaner and also necessary for proper DE33 support later.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-20-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Layer related peripherals should take layer struct as a input. This
looks cleaner and also necessary for proper DE33 support later.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-19-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
This change is equally a cleanup (less arguments) and preparation for
DE33 separate plane driver. It will introduce additional register space.
No functional changes.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-18-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
This change is equally a cleanup (less arguments) and preparation for
DE33 separate plane driver. It will introduce additional register space.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-17-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
With DE33, number of planes no longer depends on mixer because layers
are shared between all mixers.
Get this value via parameter, so DE specific code can fill in proper
value.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-16-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
In the pursuit of making UI/VI layer code independent of DE version,
change meaning of UI index to index of the plane within mixer. DE33 can
split amount of VI and UI planes between multiple mixer in whatever way
it deems acceptable, so simple calculation VI num + UI index won't be
meaningful anymore.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-15-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
