-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnS4Y8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGe6AIAI4rjLLPlxUKQbx4
JP9lsKH7vqeIVvuMqzFau7+B8ngJ+80OESnBF7n43oNEqdJ0NYiL+rPtcGgBjZDP
yUu5DlzVSxpAIQBZe2Nc0dz/5NbT9QxKyC5Yl/whpNIR7UHx1RFvDJYxwN9xKxTw
ggLQevKAnHrKjIOKjq70Yqz2T1JMXc9Wp/xpur0oGioiFW/lH24CgHDXjE2Ka9oD
wqhotzThuSaaVDmqZ8WNFKxx2onR4r8/NpljaVT2mWRJ2+IMF4pMOBJZRQiNZtRa
1CsoJ3aV6pslAsuC1dLboCMul48VUgyu7l3xQwXVuA5bRO1jqt5ILWC10g09OItU
7CxGTno=
=1TRg
-----END PGP SIGNATURE-----
Merge v7.0-rc7 into drm-next
Thomas Zimmermann needs 2f42c1a616 ("drm/ast: dp501: Fix
initialization of SCU2C") for drm-misc-next.
Conflicts:
- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
Just between e927b36ae1 ("drm/amd/display: Fix NULL pointer
dereference in dcn401_init_hw()") and it's cherry-pick that confused
git.
- drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
Deleted in 6b0a611628 ("drm/amd/pm: Unify version check in SMUv11")
but some cherry-picks confused git. Same for v12/v14.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Apparently I forgot about the pipe min_voltage_level when I
decoupled the CDCLK calculations from modesets. Even if the
CDCLK frequency doesn't need changing we may still need to
bump the voltage level to accommodate an increase in the
port clock frequency.
Currently, even if there is a full modeset, we won't notice the
need to go through the full CDCLK calculations/programming,
unless the set of enabled/active pipes changes, or the
pipe/dbuf min CDCLK changes.
Duplicate the same logic we use the pipe's min CDCLK frequency
to also deal with its min voltage level.
Note that the 'allow_voltage_level_decrease' stuff isn't
really useful here since the min voltage level can only
change during a full modeset. But I think sticking to the
same approach in the three similar parts (pipe min cdclk,
pipe min voltage level, dbuf min cdclk) is a good idea.
Cc: stable@vger.kernel.org
Tested-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15826
Fixes: ba91b9eecb ("drm/i915/cdclk: Decouple cdclk from state->modeset")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260325135849.12603-2-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
(cherry picked from commit 0f21a14987ebae3c05ad1184ea872e7b7a7b8695)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Convert the low-hanging fruits of workaround checks to the workaround
framework. Instead of having display structure checks for the
workarounds all over, concentrate the checks in intel_display_wa.c.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260305100100.332956-5-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's not much use in passing a number to the macro and let it
convert that into the enum and a string. It just hides the symbols.
Remove the number to enum conversion magic in intel_display_wa().
This has the side-effect of changing the print in the drm_WARN() that
is issued when the number is not implemented, but that is moot anyway
and can be changed later to something cleaner if needed.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260305100100.332956-2-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
There are certain register definitions which are commonly shared
by i915, xe and display. Extract the same to a common header to
avoid duplication.
Move GEN6_PCODE_MAILBOX to common pcode header to make intel_cdclk.c
free from including i915_reg.h.
v3: Include pcode header as required, instead in i915_reg.h (Jani)
v2: Make the header granular and per feature (Jani)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260205094341.1882816-6-uma.shankar@intel.com
Call the parent driver pcode functions through the parent interface
function pointers instead of expecting both to have functions of the
same name.
In i915, add the interface to existing intel_pcode.[ch], while in xe
move them to new display/xe_display_pcode.[ch] and build it only for
CONFIG_DRM_XE_DISPLAY=y.
Do not add separate write and write_timeout calls in the
interface. Instead, handle the default 1 ms timeout in the
intel_parent.c glue layer.
This drops the last intel_pcode.h includes from display, and allows us
to remove the corresponding xe compat header.
v2: initialize .pcode in i915
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260126112925.2452171-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On Xe3_LPD, there is no instruction to program the CD2X divider anymore
and the hardware is expected to always use the default value of 0b00,
meaning "divide by 1".
With that, the CDCLK_CTL register was changed so that:
(1) The field "CD2X Divider Select" became a debug-only field.
Because we are programming CDCLK_CTL with a direct write instead
of read-modify-write operation, we still need to program "CD2X
Divider Select" in order to keep the field from deviating from its
default value. Let's, however, throw a warning if we encounter a
CDCLK value that would result in an unexpected value for that
field.
(2) The field "CD2X Pipe Select" has been removed. In fact, some
debugging in a PTL machine showed that such field comes back as
zero after writing a non-zero value to it. As such, do not
program it starting with Xe3_LPD.
v2:
- Add missing "val |= " when calling bxt_cdclk_cd2x_pipe().
(Dnyaneshwar)
Bspec: 68864, 69090
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20260106-xe3_lpd-no-cd2x-divider-v2-1-06e5cbc9dabb@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Under the hood, intel_wakeref_t is just struct ref_tracker *. Use the
actual underlying type both for clarity (we *are* using intel_wakeref_t
as a pointer though it doesn't look like one) and to help i915, xe and
display coexistence without custom types.
v2: Keep intel_wakeref.h includes as they are
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/f182bd26d5f9a00e843246d4aac8b25ff7531c51.1764076995.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Convert everything except uncore access to struct
intel_display. Converting the graphics version checks to display version
checks needs a tweak for display version 13, which have graphics version
12.
While at it, convert logging to drm_dbg_kms().
v2: Handle display version 13
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251120161846.3128999-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Convert some of the intel_de_wait_custom() users over to
intel_de_wait_us(). We'll eventually want to eliminate
intel_de_wait_custom() as it's a hinderance towards using
poll_timeout_us().
This includes all the obvious cases where we only specify
a microsecond timeout to intel_de_wait_custom().
Done with cocci (with manual formatting fixes):
@@
expression display, reg, mask, value, timeout_us, out_value;
@@
- intel_de_wait_custom(display, reg, mask, value, timeout_us, 0, out_value)
+ intel_de_wait_us(display, reg, mask, value, timeout_us, out_value)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-6-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
intel_de_wait*() take the timeout in milliseconds. Include
that information in the function name to make life less
confusing. I'll also be introducing microsecond variants
of these later.
Done with cocci:
@@
@@
(
static int
- intel_de_wait
+ intel_de_wait_ms
(...)
{
...
}
|
static int
- intel_de_wait_fw
+ intel_de_wait_fw_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
(...)
{
...
}
)
@@
@@
(
- intel_de_wait
+ intel_de_wait_ms
|
- intel_de_wait_fw
+ intel_de_wait_fw_ms
|
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
|
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-4-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add userptr support to ivpu.
- Add IOCTL's for resource and telemetry data in amdxdna.
Core Changes:
- Improve some atomic state checking handling.
- drm/client updates.
- Use forward declarations instead of including drm_print.h
- RUse allocation flags in ttm_pool/device_init and allow specifying max
useful pool size and propagate ENOSPC.
- Updates and fixes to scheduler and bridge code.
- Add support for quirking DisplayID checksum errors.
Driver Changes:
- Assorted cleanups and fixes in rcar-du, accel/ivpu, panel/nv3052cf,
sti, imxm, accel/qaic, accel/amdxdna, imagination, tidss, sti,
panthor, vkms.
- Add Samsung S6E3FC2X01 DDIC/AMS641RW, Synaptics TDDI series DSI,
TL121BVMS07-00 (IL79900A) panels.
- Add mali MediaTek MT8196 SoC gpu support.
- Add etnaviv GC8000 Nano Ultra VIP r6205 support.
- Document powervr ge7800 support in the devicetree.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/5afae707-c9aa-4a47-b726-5e1f1aa7a106@linux.intel.com
Add CDCLK table for Xe3p_LPD.
Just as with Xe3_LPD, we don't need to send voltage index info in the
PMDemand message, so we are able to re-use xe3lpd_cdclk_funcs.
With the new CDCLK table, we also need to update the maximum CDCLK value
returned by intel_update_max_cdclk().
Bspec: 68861, 68863
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-8-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The remaining utils display needs from i915_utils.h are primarily
MISSING_CASE() and fetch_and_zero(), with a couple of
i915_inject_probe_failure() uses.
To avoid excessive churn, add duplicates of MISSING_CASE() and
fetch_and_zero() to intel_display_utils.h, and switch display to use the
display utils.
As long as there are display files that include i915_drv.h, which
includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and
fetch_and_zero() in both utils headers. We can remove them once display
no longer depends on i915_drv.h.
A couple of files in display still need i915_utils.h for
i915_inject_probe_failure(). Annotate this. They will be handled
separately.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
In cases where the requested minimum CDCLK exceeds all available
values for the current reference clock, the CDCLK selection logic
previously returned 0. This could result coverity division or
modulo by zero issue.
Introduce a fallback mechanism that returns platform's max_cdclk_freq
instead of 0.
v2: Update safe fallback value to max cdclk. (Ville)
v3: Update commit messgae (Mika)
Signed-off-by: Naladala Ramanaidu <ramanaidu.naladala@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251017150526.781715-1-ramanaidu.naladala@intel.com
Currently we compute the min_cdclk for each pipe during
intel_cdclk_atomic_check(). But that is too late for the
pipe prefill vs. vblank length checks (done during
intel_compute_global_watermarks).
We can't just reorder these things due to other dependencies,
so instead pull only the per-crtc minimum cdclk calculation
ahead. We should have enough information for that as soon
as we've computed the min cdclk for the planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-8-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
intel_bw_crtc_min_cdclk() (aka. the thing that deals with what bspec
calls "Maximum Pipe Read Bandwidth") doesn't really have anything to
do with the rest of intel_bw.c (which is all about SAGV/QGV and
memory bandwidth). Move it into intel_crtc.c (for the lack of a better
place).
And I don't really want to call intel_bw.c functions from intel_crtc.c,
so move out intel_bw_crtc_data_rate() as well. And when we move that we
pretty much have to move intel_bw_crtc_num_active_planes() as well since
the two are meant to be used as a pair (they both implement the same
"ignore the cursor" logic).
And in an effort to keep the namespaces at least semi-sensible we
flip the intel_bw_crtc_ prefix into intel_crtc_bw_.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Currently intel_bw.c contains basically three completely independent
parts:
- SAGV/memory bandwidth handling
- DBuf bandwidth handling
- "Maximum pipe read bandwidth" calculation, which is some kind
of internal per-pipe bandwidth limit.
Carve out the DBuf bandwdith handling into a separate file since
there is no actual dependency between it and the rest of intel_bw.c.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Introduce a helper to compute the min required cdclk frequency
for a given guardband size. This could be used to bump up the
cdclk in case the vblank is so small that the normally computed
minimum cdclk results in too slow a prefill.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-5-ville.syrjala@linux.intel.com
Add helpers to compute the CDCLKl adjustment factor for prefill
calculations. The adjustment factor is always <= 1.0. That is,
a faster CDCLK speeds up the pipe prefill.
intel_cdclk_prefill_adjustment_worst() gives out a worst case estimate,
meant to be used during guardband sizing. We can actually do better
than 1.0 here because the absolute minimum CDCLK is limited by the
dotclock. This will still allow planes, pfit, etc. to be changed any
which way without having to resize the guardband yet again.
intel_cdclk_prefill_adjustment() is supposed to give a more accurate
value based on the current min cdclk for the pipe, but currently that
is not yet available when this gets called. So for now use the same
worst case estimate here.
The returned numbers are in .16 binary fixed point.
TODO: the intel_cdclk_prefill_adjustment_worst() approach here
can result in guardband changes for DRRS. But I'm thinking
that is fine since M/N changes will always happen on the
legacy timing generator so guardband doesn't actually matter.
May need to think about this a bit more though...
v2: Use the worst case estimate always for now
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-4-ville.syrjala@linux.intel.com
Currently we are considering the set of active pipes when
determining if we need to boost the cdclk due to glk audio
issues. Replace that with the set of logically enabled pipes
instead. That is generally how everything else cdclk related
is computed (cdclk_state->logical is based on logically
enabled pipes).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-19-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
There's no real reason anymore to tie cdclk updates to
state->modeset/any_ms. Always call the cdclk functions and
allow them to decide whether cdclk update is necessary/desired
or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-17-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
intel_bw_crtc_min_cdclk() depends only on per-crtc state,
so there is no real point in having it complicate the global
bw_min_cdclk. Instead let's just account for it in
intel_crtc_compute_min_cdclk().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-16-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Update crtc min_cdclk directly from when calling
intel_cdclk_update_crtc_min_cdclk() rather than doing it later
from intel_compute_min_cdclk().
This will eg. allow better control over when to update the
cdclk. For now we preserve the current behaviour by allowing
the cdclk to decrease when any pipe needs to do a full modeset.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-15-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
There's no reason to defer intel_plane_calc_min_cdclk() until
intel_cdclk_atomic_check(). Just do this as part of
intel_atomic_check_planes() (after we've added all the planes to
the state that affect the per-plane min_cdclk calculation).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-14-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Currently we call intel_cdclk_update_crtc_min_cdclk() per-plane.
That is rather wasteful, and also won't account for any of the
other per-pipe min_cdclk restrictions from
intel_crtc_compute_min_cdclk(). Change the behaviour to do
do the comparison per-crtc instead, and use the final min cdclk
as computed by intel_crtc_compute_min_cdclk().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-13-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Update bw_min_cdclk directly from intel_bw_calc_min_cdclk()
rather than doing it later from intel_compute_min_cdclk().
This will allow better control over when to update the
cdclk. For now we preserve the current behaviour by allowing
the cdclk to decrease when any pipe needs to do a full modeset.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-12-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Hide the cdclk state details better by providing a helper
(intel_cdclk_update_crtc_min_cdclk()) by which the crtc code
can inform the cdclk code about a new per-pipe min_cdclk value.
Note that this is currently being called once per-plane, but
it'll be changed to be just a single call for the whole pipe
later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-11-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
I plan to better decouple the cdclk computation from actual
modesets. To that end make the cdclk code self sufficient in
being able to determine if a full cdclk calculation/update is
needed or not due to some not strictly cdclk related reason.
Currently we have three such things that depend active_pipes:
- cdclk_state->actual
- glk audio w/a
- dg2 power well stuff
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-8-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Extract the code to determine the DG2 pipe power well count
into a small helper. I'll have other uses for this later.
TODO: need to move this power well stuff out from the cdclk code...
v2: Don't lose the early return from intel_cdclk_pcode_pre_notify()
(kernel test robot)
v3: Compare old vs. new, not old vs. old (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250926083950.24486-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Use vlv_clock_get_hpll_vco() helper more to avoid looking at
i915->hpll_freq directly. Cache and return the cached results to avoid
repeated lookups.
v2: Rebase
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com> # v1
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/14695618682d8d8fad1adc485de7a122c8e1494a.1757688216.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add vlv_clock_get_cdclk() helper to hide the details from the callers.
For now, this means running vlv_get_hpll_vco() twice in vlv_get_cdclk(),
but this will be improved later.
v2: Rebase
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/fc93ccf998300048432d18ce7e8690bd54e1e18d.1757688216.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
