Use memcpy_and_pad() instead of memcpy() followed by memset() to
simplify atmel_sha_hmac_setup().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop of_match_ptr() because OF matching is stubbed out when CONFIG_OF=n.
Indent bcm_spu_pdriver.driver and its members while at it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a descriptor ring reset. This causes a hang in the
driver's unload/load sequence.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callback already has the correct type - remove the redundant cast.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit "gpu: host1x: Allow entries in BO caches to be freed",
host1x_bo_pin() and host1x_bo_unpin() handle the bo's refcount
themselves. .pin/.unpin callbacks should not adjust it.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A reset requested through /sys/bus/pci/devices/.../reset invokes the
driver reset_prepare() and reset_done() callbacks. The QAT driver does
not implement those callbacks today, so the reset proceeds without
quiescing the device or bringing it back up afterward, which leaves
the device unusable.
Hook reset_prepare() and reset_done() into adf_err_handler so the
common shutdown and recovery flow also runs for reset. Skip device
quiesce if the device is already in a down state.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the shutdown and recovery sequences out of adf_error_detected()
and adf_slot_reset() into reset_prepare() and reset_done() helpers.
This makes the AER recovery path easier to follow and prepares the
common reset flow for reuse by additional PCI reset callbacks without
duplicating the logic.
No functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Skip the shutdown and restart flow when adf_slot_reset() is entered
for a device that is already down. In that case, leave
ADF_STATUS_RESTARTING clear and let adf_slot_reset() restore PCI
function state without calling adf_dev_up(), re-enabling SR-IOV, or
sending restarted notifications.
This is in preparation for adding reset_prepare() and reset_done()
callbacks in adf_aer.c.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT driver currently toggles PCI bus mastering in multiple places
(probe paths, and reset callbacks). This makes BME state depend on
call ordering and on what PCI command bits were captured in saved PCI
config state.
Make BME control explicit and deterministic:
- remove pci_set_master() from device-specific probe paths
- add adf_set_bme() and call it from adf_dev_init() so BME is enabled
at one point before device bring-up
- drop redundant pci_set_master() and pci_clear_master from adf_aer.c
and rely on the unified init path for BME enablement
This is in preparation for adding reset_prepare() and reset_done()
hooks. In the PCI reset callback flow, the PCI core saves and
restores device configuration state around reset_prepare() and
reset_done(). This change is needed to ensure that we are able to
properly shutdown or reinitialize the device post sysfs triggered
resets.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Send fatal error notifications to subsystems and VFs as soon as
AER error detection starts, before entering the reset preparation
shutdown sequence.
This reduces notification latency and ensures peers are informed
immediately on fatal detection, rather than after restart-state setup
and arbitration teardown.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a reset is triggered via sysfs, the PCI core invokes the
reset_prepare() callback while holding pci_dev_lock(), which includes
the PCI configuration space access semaphore. If reset_prepare() calls
adf_dev_down(), the call chain adf_dev_stop() -> adf_disable_sriov()
-> pci_disable_sriov() attempts to acquire the same semaphore,
resulting in a deadlock.
Avoid this by skipping pci_disable_sriov() when ADF_STATUS_RESTARTING
is set. During reset the PCI topology is preserved, so VF devices
remain valid and enumerated across the reset. VF notification and the
quiesce handshake via adf_pf2vf_notify_restarting() are still
performed unconditionally so that VFs stop submitting work before the
PF shuts down.
Correspondingly, skip pci_enable_sriov() in adf_enable_sriov() when
VFs are already present, since their PCI devices were preserved from
before the restart.
This is in preparation for adding reset_prepare() and reset_done()
callbacks in adf_aer.c.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The VF2PF interrupt handler queues PF-side response work that stores a
raw pointer to per-VF state (struct adf_accel_vf_info). Currently,
adf_disable_sriov() destroys per-VF mutexes and frees vf_info without
stopping new VF2PF work or waiting for in-flight workers to complete. A
concurrently scheduled or already queued worker can then dereference
freed memory.
This manifests as a use-after-free when KASAN is enabled:
BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0
Write of size 8 at addr 0000000000000260 by task kworker/24:2/...
Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat]
Call Trace:
kasan_report+0x119/0x140
mutex_lock+0x76/0xe0
adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat]
adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat]
adf_iov_send_resp+0x8c/0xe0 [intel_qat]
process_one_work+0x6ac/0xfd0
worker_thread+0x4dd/0xd30
kthread+0x326/0x410
ret_from_fork+0x33b/0x670
Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker
processing, and interrupt re-enabling during teardown. Set this flag
atomically with the hardware interrupt mask inside
adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE
cluster MSI-X interrupt and flush the PF response workqueue before
tearing down per-VF locks and state so all in-flight work completes
before vf_info is destroyed.
Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and
unmask all VF2PF interrupts under the same lock when SR-IOV is
re-enabled. This ensures the software flag and hardware state transition
atomically on both the enable and disable paths.
Cc: stable@vger.kernel.org
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In-tree drivers do not need MODULE_VERSION as the kernel release
identifies the version of their code. The static version "0.6.0", which
the QAT drivers currently report, can be misleading as it might suggest
the drivers are outdated.
Remove MODULE_VERSION() from all QAT driver modules and the related
ADF_DRV_VERSION, ADF_MAJOR_VERSION, ADF_MINOR_VERSION and
ADF_BUILD_VERSION macros from adf_common_drv.h.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace two consecutive min() calls with min3() to simplify the code.
And since count is unsigned and cannot be less than zero, adjust the if
check and update the comment accordingly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use max() to simplify mv_cesa_probe() and improve its readability.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the character device and IOCTL interface have been removed,
adf_ctl_drv.c only contains module_init/module_exit hooks. Rename it
to adf_module.c to better reflect its purpose and rename the init/exit
functions accordingly.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused
adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal
module_init/module_exit hooks for workqueue, AER, and crypto/compression
algorithm registration.
Clean up leftover dead code that was only reachable from the removed
IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),
adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),
adf_get_vf_real_id() and the unused ADF_CFG macros.
Additionally, drop the entry associated to QAT IOCTLs in
ioctl-number.rst.
Cc: stable@vger.kernel.org
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Reported-by: Zhi Wang <wangzhi@stu.xidian.edu.cn>
Reported-by: Bin Yu <byu@xidian.edu.cn>
Reported-by: MingYu Wang <w15303746062@163.com>
Closes: https://lore.kernel.org/all/61d6d499.ab89.19b9b7f3186.Coremail.wangzhi_xd@stu.xidian.edu.cn/
Link: https://lore.kernel.org/all/20260508034841.256794-1-w15303746062@163.com/
Link: https://lore.kernel.org/all/20260508023542.256299-1-w15303746062@163.com/
Link: https://lore.kernel.org/all/20260504025120.98242-1-w15303746062@163.com/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Lower the priority of HiSilicon's crypto implementations to allow more
suitable alternatives to be selected. For example, certain kernel
use-cases do not benefit from HiSilicon's symmetric crypto algorithms.
This change ensures that more appropriate options are chosen first while
retaining HiSilicon's implementations as alternatives.
Signed-off-by: lizhi <lizhi206@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the CONFIG_OF preprocessor guard and remove of_match_ptr() because
OF matching is stubbed out when CONFIG_OF=n.
Reformat atmel_ecc_dt_ids for consistency.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since MODULE_DEVICE_TABLE() keeps atmel_sha204a_dt_ids referenced, drop
the unnecessary __maybe_unused annotation. Also remove of_match_ptr()
because OF matching is stubbed out when CONFIG_OF=n.
Reformat atmel_sha204a_dt_ids to silence a checkpatch error and
atmel_sha204a_id for consistency.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The memory allocated for priv in safexcel_pci_probe() is not freed in the
error paths, as well as in the PCI remove function. Fix this by using
device managed allocation.
Fixes: 625f269a5a ("crypto: inside-secure - add support for PCI based FPGA development board")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When meson_allocate_chanlist() fails after a partial allocation, it already
unwinds the allocated chanlist state through its local error path.
meson_crypto_probe() then jump to error_flow and calls
meson_free_chanlist() again, causing the same per-flow resources to be torn
down twice. In the reproduced failure path, the second teardown
re-entered crypto_engine_exit() on an already destroyed worker and KASAN
reported a slab-use-after-free in kthread_destroy_worker().
Prevent double-free by handling partial allocation failures locally within
meson_allocate_chanlist() and skipping the outer cleanup path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available.
The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1,
using the reproducer under tools/testing/meson_crypto_probe. The reproducer
forces the second dma_alloc_attrs() call in the gxl-crypto probe path to
return NULL, making meson_allocate_chanlist() fail after partial
initialization. On the unpatched kernel this reliably triggered a
slab-use-after-free. With this fix applied, the same reproducer no longer
emits any KASAN report and the probe fails cleanly with -ENOMEM.
==================================================================
BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0
Read of size 8 at addr ff1100010c057a68 by task insmod/265
CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcb/0x5e0
? __virt_addr_valid+0x21d/0x3f0
? kthread_destroy_worker+0xb2/0xd0
? kthread_destroy_worker+0xb2/0xd0
kasan_report+0xca/0x100
? kthread_destroy_worker+0xb2/0xd0
kthread_destroy_worker+0xb2/0xd0
meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto]
platform_probe+0x99/0x140
really_probe+0x1c6/0x6a0
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x248/0x310
? acpi_driver_match_device+0xb0/0x100
driver_probe_device+0x48/0x210
? __pfx___device_attach_driver+0x10/0x10
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x104/0x190
? __pfx_bus_for_each_drv+0x10/0x10
? _raw_spin_unlock_irqrestore+0x2c/0x50
__device_attach+0x19d/0x3b0
? __pfx___device_attach+0x10/0x10
? do_raw_spin_unlock+0x53/0x220
device_initial_probe+0x78/0xa0
bus_probe_device+0x5b/0x130
device_add+0xcfd/0x1430
? __pfx_device_add+0x10/0x10
? insert_resource+0x34/0x50
? lock_release+0xc9/0x290
platform_device_add+0x24e/0x590
? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro]
meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro]
do_one_initcall+0xc0/0x450
? __pfx_do_one_initcall+0x10/0x10
? _raw_spin_unlock_irqrestore+0x2c/0x50
? __create_object+0x59/0x80
? kasan_unpoison+0x27/0x60
do_init_module+0x27b/0x7d0
? __pfx_do_init_module+0x10/0x10
? kasan_quarantine_put+0x84/0x1d0
? kfree+0x32c/0x510
? load_module+0x561e/0x5ff0
load_module+0x54fe/0x5ff0
? __pfx_load_module+0x10/0x10
? security_file_permission+0x20/0x40
? kernel_read_file+0x23d/0x6e0
? mmap_region+0x235/0x4a0
? __pfx_kernel_read_file+0x10/0x10
? __file_has_perm+0x2c0/0x3e0
init_module_from_file+0x158/0x180
? __pfx_init_module_from_file+0x10/0x10
? __lock_acquire+0x45a/0x1ba0
? idempotent_init_module+0x315/0x610
? lock_release+0xc9/0x290
? lockdep_init_map_type+0x4b/0x220
? do_raw_spin_unlock+0x53/0x220
idempotent_init_module+0x330/0x610
? __pfx_idempotent_init_module+0x10/0x10
? __pfx_cred_has_capability.isra.0+0x10/0x10
? ksys_mmap_pgoff+0x385/0x520
__x64_sys_finit_module+0xbe/0x120
do_syscall_64+0x115/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7d6d31690d
Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f3 b4 0f 00 f7 d8 >
RSP: 002b:00007fffc027ac68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055f7b81967c0 RCX: 00007f7d6d31690d
RDX: 0000000000000000 RSI: 000055f79a0d6cd2 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 000055f79a0d6cd2
R13: 000055f7b8196790 R14: 000055f79a0d5888 R15: 000055f7b81968e0
</TASK>
Fixes: 48fe583fe5 ("crypto: amlogic - Add crypto accelerator for amlogic GXL")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
platform_get_resource and devm_ioremap effectively open codes this.
The return type of devm_platform_ioremap_resource() is also nice as it
has multiple errors that it can return.
Because it internally calls devm_request_mem_region(), reg values and
sizes cannot overlap. This was manually verified to be the case for all
talitos users.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The problem described in commit 655ef638a2 ("crypto: talitos - fix
SEC1 32k ahash request limitation") also apply for the SEC2 hardware,
but with a limitation of 64k - 1 bytes.
Split ahash_done() into SEC1 and SEC2 paths: SEC1 continues to free the
whole descriptor list at once, while SEC2 now iterates through
descriptors one by one, submitting the next only after the previous
completes, which is required since SEC2 cannot chain descriptors in
hardware.
Cc: stable@vger.kernel.org
Fixes: c662b043cd ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ahash_process_req() was a wrapper used in commit 655ef638a2 ("crypto:
talitos - fix SEC1 32k ahash request limitation"). Rename
ahash_process_req_one() to ahash_process_req() and remove the wrapper.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In talitos_ahash_req_ctx and talitos_export_state, the fields
first_desc and last_desc describe request-level (not descriptor-level)
state. Rename them to first_request and last_request for clarity.
last_desc is also removed from talitos_ahash_req_ctx as it is no
longer used.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that SEC1 hash uses hardware descriptor chaining instead of a
workqueue to process requests exceeding TALITOS1_MAX_DATA_LEN, the
workqueue code is no longer needed.
Remove sec1_ahash_process_remaining(), the related fields from
talitos_ahash_req_ctx (request_bufsl, areq, request_sl,
remaining_ahash_request_bytes, current_ahash_request_bytes,
sec1_ahash_process_remaining), the dead code in ahash_done(), and
simplify ahash_process_req() to call ahash_process_req_one() directly
with the original areq->src and areq->nbytes.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rework the SEC1 ahash implementation to build a chain of hardware
descriptors, replacing the previous approach of submitting one
descriptor at a time via a workqueue, introduced by commit 655ef638a2
("crypto: talitos - fix SEC1 32k ahash request limitation").
Introduce ahash_process_req_prepare() which iterates over the request
data, allocating enough descriptors to cover the entire ahash request.
The new fields (bufsl, src, first, last) are added to talitos_edesc for
this purpose.
common_nonsnoop_hash() no longer calls talitos_submit(); it only
maps and sets up the descriptor. Submission is now done by the caller
after the chain is built.
ahash_free_desc_list_from() takes over calling
common_nonsnoop_hash_unmap() for each descriptor during cleanup.
Compared to the workqueue based solution, request are slightly faster
since there is no more scheduling latency induced by the workqueue, and
only one interrupt is generated by the device at the end of a chain.
Commit 655ef638a2 ("crypto: talitos - fix SEC1 32k ahash request
limitation") :
$ /usr/libexec/libkcapi/sha256sum ./test_5M.bin
013c5609d63c... ./test_5M.bin
real 0m 0.41s
user 0m 0.01s
sys 0m 0.07s
Now :
$ /usr/libexec/libkcapi/sha256sum ./test_5M.bin
013c5609d63c... ./test_5M.bin
real 0m 0.33s
user 0m 0.01s
sys 0m 0.20s
Tested on a system with an MPC885 SoC featuring the SEC1 Lite.
The increase in sys time is due to the fact that commit 37b5e8897e
("crypto: talitos - chain in buffered data for ahash on SEC1") can no
longer be applied.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, when SEC1 has buffered data (nbuf != 0), the ahash code
creates an additional descriptor on the fly inside
common_nonsnoop_hash() to handle the remainder of the data. This
approach is incompatible with the arbitrary-length descriptor chaining
that follows.
Remove the "additional descriptor" logic from common_nonsnoop_hash()
and common_nonsnoop_hash_unmap().
Also remove the nbytes adjustment for SEC1 in ahash_edesc_alloc()
that subtracted nbuf.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously added code in current_desc_hdr() in order to add support for
searching an offending descriptor inside a descriptor chain.
Move that code into a standalone function to improve readability.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously added code to talitos_submit() in order to map an entire
descriptor chain.
Move that code into a standalone function to improve readability.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously added code to flush_channel() in order to unmap an entire
descriptor.
Move that code into a standalone function to improve readability.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SEC1 hardware can process a chain of descriptors without host
intervention. Only the hash implementation currently use this feature,
but with a chain of at most 2 descriptors added in commit 37b5e8897e
("crypto: talitos - chain in buffered data for ahash on SEC1").
Add supports for chaining an arbitrary number of descriptors in a chain.
Adapt the ahash implementation to make it compatible.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to know if a descriptor has been processed by the device,
the driver polls the FIFO to see if DESC_HDR_DONE is set on a descriptor
header to confirm completion.
The current code does not make sure that the CPU gets up to date data
before reading the descriptor.
Fix this by calling dma_sync_single_for_cpu() before reading memory
written by the device.
Cc: stable@vger.kernel.org
Fixes: 58cdbc6d22 ("crypto: talitos - fix hash on SEC1.")
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dsm_create() initially checks pdev->bus when computing segment_id:
u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0;
But the next two lines unconditionally dereference pdev->bus via
pcie_find_root_port() and especially pci_dev_id(pdev), which expands
to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact
NULL, segment_id is initialised to 0 but the very next statement
crashes the kernel.
smatch flags this:
drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we
previously assumed 'pdev->bus' could be null (see line 251)
Make the NULL handling consistent: if pdev->bus is NULL the device
has no PCI context to work with and SEV TIO setup cannot proceed,
so return -ENODEV before any of the bus-dependent lookups. The
remaining initialisation now runs only on the path where pdev->bus
is known to be valid.
No change for callers where pdev->bus is non-NULL, which is the
only case where dsm_create() did meaningful work before this change.
Fixes: 4be423572d ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the simpler min() macro since the values are all unsigned and
compatible.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: David Laight <david.laght.linux@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace snprintf("%s") with the faster and more direct strscpy().
In cc_aead.c, group the includes while at it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace if-else with an early return to reduce code nesting, and move
the variable declarations to the top of the function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use a flexible array member to combine allocations.
Add __counted_by for extra runtime analysis.
Error in case of no channels as they are required.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the privers already have this correctly placed, so adjust
the missing ones. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When handling a PDH export, treat a zero-length userspace cert chain buffer
as a request to query the length of the relevant blobs. Failure to account
for the zero-length buffer trips a BUG_ON() when running with
CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the
ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation).
kernel BUG at arch/x86/mm/physaddr.c:28 !
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded
Tainted: G W 6.18.16-smp-DEV #1 NONE
Tainted: [W]=WARN
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28
RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293
RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600
RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010
RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000
R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000
FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0
Call Trace:
<TASK>
[<ffffffff853d3869>] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308
[<ffffffff853d1fdd>] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556
[<ffffffff82549ebc>] vfs_ioctl fs/ioctl.c:52 [inline]
[<ffffffff82549ebc>] __do_sys_ioctl fs/ioctl.c:598 [inline]
[<ffffffff82549ebc>] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584
[<ffffffff8630115f>] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline]
[<ffffffff8630115f>] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98
[<ffffffff81000136>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fd3158eac39
</TASK>
Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting
the physical address is just arithmetic, and the PSP errors out before
trying to write to the garbage address (which it must, otherwise querying
the blob lengths would clobber memory at pfn=0).
Fixes: 76a2b524a4 ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove repeated "+".
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
Refuse to re-try initialization if SNP is not already initialized for
SNP_CONFIG.
This is technically an ABI break: before if SNP initialization failed it
could be transparently retriggered by this ioctl, and if no VMs were
running, everything worked fine. Hopefully this is enough of a corner case
that nobody will notice, but someone does, there are a few options:
* do something like symbol_get() for kvm and refuse to initialize if KVM is
loaded
* check each cpu's HSAVE_PA for non-zero data before re-initializing
* once initialization has failed, continue to refuse to initialize until
the ccp module is unloaded
Fixes: ceac7fb89e ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead.
Fixes: ceac7fb89e ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SNP_COMMIT command does not require the firmware to be in any
particular state. Skip initializing it if it was previously uninitialized.
The SEV-SNP firmware specification doc 56860 does not mention SNP_COMMIT in
Table 5 as a command that is allowed in the UNINIT state, but it is in fact
allowed and a future documentation update will reflect that.
Fixes: ceac7fb89e ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
sev_move_to_init_state() is called for ioctls requiring only SEV firmware:
SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and
SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on
the SEV firmware. Since these commands do not require SNP to be
initialized, skip it by calling __sev_platform_init_locked() which only
initializes the SEV firmware. This way SNP is not Initialized at all, and
HSAVE_PA is not cleared.
The previous code saved any SEV initialization firmware error to
init_args.error and then threw it away and hardcoded the return value of
INVALID_PLATFORM_STATE regardless of the real firmware error. This patch
changes it to surface the underlying error, which is hopefully both more
useful and doesn't cause any problems.
Note that it is still safe to call __sev_firmware_shutdown() directly: it
calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not
initialized.
Fixes: ceac7fb89e ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Assigning .driver_data for drivers that don't use this struct member is
just noise that can better be dropped. The same applies for an explicit
zero in the terminating entry. Drop these.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .driver_data member of the struct pci_device_id array was
initialized by list expressions. This isn't easily readable if you're
not into PCI. Using the PCI_DEVICE macro and named initializers is more
explicit and thus easier to parse. Also skip explicit assignment of 0
(which the compiler then takes care of) in the terminating entry.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In some configurations, the firmware does not support all VM types. The SEV
firmware has an entry in the TCB_VERSION structure referred to as the
Security Version Number in the SEV-SNP firmware specification and referred
to as the "SPL" in SEV firmware release notes. The SEV firmware release
notes say:
On every SEV firmware release where a security mitigation has been
added, the SNP SPL gets increased by 1. This is to let users know that
it is important to update to this version.
The SEV firmware release that fixed CVE-2025-48514 by disabling SEV-ES
support on vulnerable platforms has this SVN increased to reflect the fix.
The SVN is platform-specific, as is the structure of TCB_VERSION.
Check CURRENT_TCB instead of REPORTED_TCB, since the firmware behaves with
the CURRENT_TCB SVN level and will reject SEV-ES VMs accordingly.
Parse the SVN, and mask off the SEV_ES supported VM type from the list of
supported types if it is above the per-platform threshold for the relevant
platforms.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Tycho Andersen (AMD) <tycho@kernel.org>
Link: https://patch.msgid.link/20260416232329.3408497-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
...to its own function. This way it can be used when the kernel needs
access to the platform status regardless of the INIT state of the firmware.
No functional change intended.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Tycho Andersen (AMD) <tycho@kernel.org>
Link: https://patch.msgid.link/20260416232329.3408497-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If snp_prepare() fails, SNP_INIT will fail, so skip it and return early.
Note that this is not a change in initialization behavior: if SNP_INIT fails
even before this change, it will still return an error and
__sev_snp_init_locked() will fail initialization of other SEV modes.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Link: https://lore.kernel.org/20260429155636.540040-1-tycho@kernel.org
Commit 8006aff155 ("crypto: atmel-sha204a - Set hwrng quality to
lowest possible") reduced the hwrng quality to 1 based on a review by
Bill Cox [1]. However, despite its title, the review only tested the
ATSHA204, not the ATSHA204A.
In the same thread, Atmel engineer Landon Cox wrote "this behavior has
been eliminated entirely"[2] in the ATSHA204A and "this problem does not
affect the ATECC108 or the ATECC108A (or the ATSHA204A)"[3].
According to the official ATSHA204A datasheet [4], the device contains a
high-quality hardware RNG that combines its output with an internal seed
value stored in EEPROM or SRAM to generate random numbers. The device
also implements all security functions using SHA-256, and the driver
uses the chip's Random command in seed-update mode.
Keep 'quality = 1' for ATSHA204, but drop the explicit hwrng quality
reduction for ATSHA204A and fall back to the hwrng core default.
[1] https://www.metzdowd.com/pipermail/cryptography/2014-December/023858.html
[2] https://www.metzdowd.com/pipermail/cryptography/2014-December/023852.html
[3] https://www.metzdowd.com/pipermail/cryptography/2014-December/023886.html
[4] https://ww1.microchip.com/downloads/en/DeviceDoc/ATSHA204A-Data-Sheet-40002025A.pdf
Fixes: 8006aff155 ("crypto: atmel-sha204a - Set hwrng quality to lowest possible")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use list_first_entry_or_null() to simplify starfive_cryp_find_dev() and
remove the now-unused local variable 'struct starfive_cryp_dev *tmp'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new helper omap_sham_unregister_algs() and replace two for loops
in omap_sham_probe() and omap_sham_remove(), which also ensure
->registered is reset to 0.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new helper omap_des_unregister_algs() and replace two for loops in
omap_des_probe() and omap_des_remove(), which also ensure ->registered
is reset to 0.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new helper omap_aes_unregister_algs() and replace two for loops in
omap_aes_probe() and omap_aes_remove(), which also ensure ->registered
is reset to 0.
Replace two additional for loops with crypto_engine_unregister_aeads()
while at it and reset ->registered to 0 explicitly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG
is enabled.
Fixes: 8d818c1055 ("crypto: caam/qi2 - add DPAA2-CAAM driver")
Fixes: 226853ac3e ("crypto: caam/qi2 - add skcipher algorithms")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() and gen_split_key() to avoid leaking secrets at runtime when
CONFIG_DYNAMIC_DEBUG is enabled.
Fixes: 6e00550319 ("crypto: caam - print debug messages at debug level")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The blocking and non-blocking paths were failing to provide valid entropy
due to improper buffer management. Reading the buffer starting from byte 1,
only fetch the 32 bytes of random data from the return message.
Tested on an Atmel SHA204A device.
Before (here for blocking), tests showed repeatedly reading reduced bytes.
$ head -c 32 /dev/hwrng | hexdump -C
00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020
After, the result will be similar to the following:
$ head -c 32 /dev/hwrng | hexdump -C
00000000 5a fc 3f 13 14 68 fe 06 68 0a bd 04 83 6e 09 69 |Z.?..h..h....n.i|
00000010 75 ff cf 87 10 84 3b c9 c1 df ae eb 45 53 4c c3 |u.....;.....ESL.|
00000020
Fixes: da001fb651 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Tested-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use a flexible array member to combine and simplify allocation.
Move struct mv_cesa_dev down as flexible array members require full
definitions.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
chainup_buffers() builds a linked list of buffer descriptors for a
scatterlist. If dma_pool_alloc() fails while constructing the list, the
current code sets buf to NULL and later dereferences it unconditionally
at the end of the function:
buf->next = NULL;
buf->phys_next = 0;
This can lead to a null-pointer dereference on allocation failure.
If the failure happens after part of the descriptor chain has already
been allocated and DMA-mapped, the partially constructed chain also
needs to be released.
Fix this by terminating the partially constructed chain on allocation
failure and letting the callers unwind it via their existing cleanup
paths. Also fix ablk_perform() to preserve the hook pointers before
checking for failure, so partially built chains can be freed correctly.
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While the sun4i-ss and sun8i-ce drivers started selecting CRYPTO_RNG,
the sun8i-ss variant does not, and causes a link failure:
aarch64-linux-ld: drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.o: in function `sun8i_ss_unregister_algs':
sun8i-ss-core.c:(.text.sun8i_ss_unregister_algs+0x94): undefined reference to `crypto_unregister_rng'
aarch64-linux-ld: drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.o: in function `sun8i_ss_probe':
sun8i-ss-core.c:(.text.sun8i_ss_probe+0x40c): undefined reference to `crypto_register_rng'
Looking more closely, I see that all of the allwinner crypto drivers have the
same logic where the rng and hash parts of the driver are optional, but then the
generic code is still selected, which is a bit inconsistent, aside from the
missing CRYPTO_RNG select on sun8i-ss.
Change the approach so only the bits that are actually used are built, using
ifdef checks around the optional portions that match the optional references
to the sub-drivers.
Ideally the drivers would get reworked in a way that keeps all the bits
related to the skcipher/ahash/rng codecs in the respective sub-drivers,
rather than having a common driver that knows about all of these.
Fixes: cdadc14359 ("crypto: cryptomgr - Select algorithm types only when CRYPTO_SELFTESTS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use straightforward (buffer, len) parameters instead of struct
drbg_string or lists of strings. This simplifies the code considerably.
For now struct drbg_string is still used in crypto_drbg_ctr_df(), so
move its definition to crypto/df_sp80090a.h.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested on hardware with an ATECC608B at 0x60. The device binds
successfully, passes the driver's sanity check, and registers the
ecdh-nist-p256 KPP algorithm.
The hardware ECDH path was also exercised using a minimal KPP test
module, covering private key generation, public key derivation, and
shared secret computation.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> is the stack variable data left uninitialized when taking the else branch?
> Since data.tio_en is later evaluated unconditionally, could stack garbage
> cause it to evaluate to true, leading to erroneous attempts to allocate
> pages and initialize SEV-TIO on unsupported hardware?
If the firmware is too old to support SEV_INIT_EX, data is left
uninitialized but used in the debug logging about whether TIO is enabled or
not.
Fixes: 4be423572d ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> if __snp_alloc_firmware_pages() returns NULL under memory pressure, is it
> safe to pass it directly to page_address()?
>
> On architectures without HASHED_PAGE_VIRTUAL, page_address(NULL) might
> compute a deterministic but invalid, non-zero virtual address. The
> subsequent if (tio_status) check would then evaluate to true, and
> sev_tsm_init_locked() would dereference the invalid pointer.
Indeed, page_address(NULL) will return non-NULL garbage here. Fix this by
checking the page allocation itself for NULL, not the resulting virtual
address.
Fixes: 4be423572d ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> regarding the bounds check in snp_filter_reserved_mem_regions()
> called via walk_iomem_res_desc(): does the check
> if ((range_list->num_elements * 16 + 8) > PAGE_SIZE)
> allow an off-by-one heap buffer overflow?
>
> If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096.
> Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count
> (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated
> PAGE_SIZE buffer.
Fix this by accounting for the entry about to be written to, in addition to
the entries that are already allocated.
Fixes: 1ca5614b84 ("crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before SNP x86 shutdown [1], all HV_FIXED pages were always leaked on
module unload. Now pages can be reclaimed if they are freed before SNP
shutdown.
The SFS driver does sfs_dev_destroy() -> snp_free_hv_fixed_pages(), marking
the command buffer as free. But this happens after sev_dev_destroy() in
psp_dev_destroy(), so the pages are always leaked.
Rearrange psp_dev_destroy() to destroy things in the reverse order from
psp_init(), so that any dependencies can be unwound accordingly. This lets
SFS free the page and the subsequent SNP shutdown release it.
This was identified with use of Chris Mason's review-prompts:
https://github.com/masoncl/review-prompts
[1]: https://lore.kernel.org/all/20260324161301.1353976-1-tycho@kernel.org/
Fixes: 648dbccc03 ("crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver")
Reported-by: review-prompts
Assisted-by: Claude:claude-4.6-opus
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current implementation of the heartbeat error injection uses
adf_disable_arb_thd() to stop a specific accelerator engine thread
from processing requests. This does not reliably prevent the device
from generating responses.
Fix the error injection by disabling the device arbiter through
exit_arb() instead. This properly simulates a device failure by
stopping all arbitration, which results in missing responses for
sent requests.
Remove the now unused adf_disable_arb_thd() function and its
declaration.
Fixes: e2b67859ab ("crypto: qat - add heartbeat error simulator")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.
Fixes: 2b789435d7 ("crypto: ccp - CCP AES crypto API support")
Signed-off-by: Paul Moses <p@1g4.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When retrieving the ID for the CPU, don't attempt to copy the ID blob to
userspace if the firmware command failed. If the failure was due to an
invalid length, i.e. the userspace buffer+length was too small, copying
the number of bytes _firmware_ requires will overflow the kernel-allocated
buffer and leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388
CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222
sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Fixes: d6112ea0cb ("crypto: ccp - introduce SEV_GET_ID2 command")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When retrieving the PDH cert, don't attempt to copy the blobs to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033
CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347
sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Fixes: 76a2b524a4 ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When retrieving the PEK CSR, don't attempt to copy the blob to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405
CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872
sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Fixes: e799035609 ("crypto: ccp: Implement SEV_PEK_CSR ioctl command")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For authenc AEAD algorithms, sa2ul is trying to register very specific
-ce version as a fallback. This causes registration failure on SoCs
which do not have ARMv8-CE enabled/available. Change the fallback
algorithm from the specific driver name to generic algorithm name so
that the kernel can allocate any available fallback.
Fixes: d2c8ac187f ("crypto: sa2ul - Add AEAD algorithm support")
Signed-off-by: T Pratham <t-pratham@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
eip93_hmac_setkey() allocates a temporary ahash transform for
computing HMAC ipad/opad key material. The allocation uses the
driver-specific cra_driver_name (e.g. "sha256-eip93") but passes
CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms.
Since the EIP93 hash algorithms are the only ones registered
under those driver names and they are inherently async, the
lookup is self-contradictory and always fails with -ENOENT.
When called from the AEAD setkey path, this failure leaves the
SA record partially initialized with zeroed digest fields. A
subsequent crypto operation then dereferences a NULL pointer in
the request context, resulting in a kernel panic:
```
pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93]
lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93]
sp : ffffffc082feb820
x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000
x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980
x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0
x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000
x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009
x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0
Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740)
```
The reported symbol eip93_aead_handle_result+0xc8c is a
resolution artifact from static functions being merged under
the nearest exported symbol. Decoding the faulting sequence:
```
910142b6 ADD X22, X21, #0x50
f94012e0 LDR X0, [X23, #0x20]
f9002aa0 STR X0, [X21, #0x50]
f90006d3 STR X19, [X22, #0x8]
f9400740 LDR X0, [X26, #0x8]
```
The faulting LDR at [X26, #0x8] is loading ctx->flags
(offset 8 in eip93_hash_ctx), where ctx has been resolved
to NULL from a partially initialized or unreachable
transform context following the failed setkey.
Fix this by dropping the CRYPTO_ALG_ASYNC mask from the
crypto_alloc_ahash() call. The code already handles async
completion correctly via crypto_wait_req(), so there is no
requirement to restrict the lookup to synchronous algorithms.
Note that hashing a single 64-byte block through the hardware
is likely slower than doing it in software due to the DMA
round-trip overhead, but offloading it may still spare CPU
cycles on the slower embedded cores where this IP is found.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
[Detailed investigation report of this bug]
Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes.
- Remove simd skcipher support.
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off.
Algorithms:
- Remove CPU-based des/3des acceleration.
- Add test vectors for authenc(hmac(md5),cbc(aes)).
- Add test vectors for authenc(hmac(md5),cbc(des)).
- Add test vectors for authenc(hmac(md5),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha1),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha224),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha256),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha384),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha512),rfc3686(ctr(aes))).
- Replace spin lock with mutex in jitterentropy.
Drivers:
- Add authenc algorithms to safexcel.
- Add support for zstd in qat.
- Add wireless mode support for QAT GEN6.
- Add anti-rollback support for QAT GEN6.
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2.
-----BEGIN PGP SIGNATURE-----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=KoAB
-----END PGP SIGNATURE-----
Merge tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes
- Remove simd skcipher support
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off
Algorithms:
- Remove CPU-based des/3des acceleration
- Add test vectors for authenc(hmac(md5),cbc({aes,des})) and
authenc(hmac({md5,sha1,sha224,sha256,sha384,sha512}),rfc3686(ctr(aes)))
- Replace spin lock with mutex in jitterentropy
Drivers:
- Add authenc algorithms to safexcel
- Add support for zstd in qat
- Add wireless mode support for QAT GEN6
- Add anti-rollback support for QAT GEN6
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2"
* tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (129 commits)
crypto: af_alg - use sock_kmemdup in alg_setkey_by_key_serial
crypto: vmx - remove CRYPTO_DEV_VMX from Kconfig
crypto: omap - convert reqctx buffer to fixed-size array
crypto: atmel-sha204a - add Thorsten Blum as maintainer
crypto: atmel-ecc - add Thorsten Blum as maintainer
crypto: qat - fix IRQ cleanup on 6xxx probe failure
crypto: geniv - Remove unused spinlock from struct aead_geniv_ctx
crypto: qce - simplify qce_xts_swapiv()
crypto: hisilicon - Fix dma_unmap_single() direction
crypto: talitos - rename first/last to first_desc/last_desc
crypto: talitos - fix SEC1 32k ahash request limitation
crypto: jitterentropy - replace long-held spinlock with mutex
crypto: hisilicon - remove unused and non-public APIs for qm and sec
crypto: hisilicon/qm - drop redundant variable initialization
crypto: hisilicon/qm - remove else after return
crypto: hisilicon/qm - add const qualifier to info_name in struct qm_cmd_dump_item
crypto: hisilicon - fix the format string type error
crypto: ccree - fix a memory leak in cc_mac_digest()
crypto: qat - add support for zstd
crypto: qat - use swab32 macro
...
the machine to claim SNP-related resources only when SNP guests are really
going to be launched. The user requests this by loading the ccp module and
thus it controls when SNP initialization is done
So export an API which module code can call and do the necessary SNP setup
only when really needed
- Drop an unnecessary write-back and invalidate operation that was being
performed too early, since the ccp driver already issues its own at the
correct point in the initialization sequence
— Drop the hotplug callbacks for enabling SNP on newly onlined CPUs, which
were both architecturally unsound (the firmware rejects initialization if any
CPU lacks the required configuration) and buggy (the MFDM SYSCFG MSR bit was
not being set)
- Code refactoring and cleanups to accomplish the above
-----BEGIN PGP SIGNATURE-----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=2eQs
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Change the SEV host code handling of when SNP gets enabled in order
to allow the machine to claim SNP-related resources only when SNP
guests are really going to be launched. The user requests this by
loading the ccp module and thus it controls when SNP initialization
is done
So export an API which module code can call and do the necessary SNP
setup only when really needed
- Drop an unnecessary write-back and invalidate operation that was
being performed too early, since the ccp driver already issues its
own at the correct point in the initialization sequence
- Drop the hotplug callbacks for enabling SNP on newly onlined CPUs,
which were both architecturally unsound (the firmware rejects
initialization if any CPU lacks the required configuration) and buggy
(the MFDM SYSCFG MSR bit was not being set)
- Code refactoring and cleanups to accomplish the above
* tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
crypto/ccp: Update HV_FIXED page states to allow freeing of memory
crypto/ccp: Implement SNP x86 shutdown
x86/sev, crypto/ccp: Move HSAVE_PA setup to arch/x86/
x86/sev, crypto/ccp: Move SNP init to ccp driver
x86/sev: Create snp_shutdown()
x86/sev: Create snp_prepare()
x86/sev: Create a function to clear/zero the RMP
x86/sev: Rename SNP_FEATURES_PRESENT to SNP_FEATURES_IMPL
x86/virt/sev: Keep the RMP table bookkeeping area mapped
x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN
x86/virt/sev: Drop support for SNP hotplug
- Migrate more hash algorithms from the traditional crypto subsystem
to lib/crypto/.
Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:
- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)
- Support these algorithms in lib/crypto/ using the AES
library and the existing arm64 assembly code
- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library
- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later
- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits
- Enable optimizations by default
- GHASH
- Migrate the standalone GHASH code into lib/crypto/
- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation
to resist cache-timing attacks and use much less memory
- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from
the crypto_shash API, as it's no longer needed
- Enable optimizations by default
- SM3
- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it
- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms
- Testing improvements
- Add a KUnit test suite for each of the new library APIs
- Migrate the existing ChaCha20Poly1305 test to KUnit
- Make the KUnit all_tests.config enable all crypto library tests
- Move the test kconfig options to the Runtime Testing menu
- Other updates to arch-optimized crypto code
- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine
- Remove some MD5 implementations that are no longer worth keeping
- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64
- Make jitterentropy and samples/tsm-mr use the crypto library APIs
Note: the overall diffstat is neutral, but when the test code is
excluded it is significantly negative:
Tests: 13 files changed, 1982 insertions(+), 888 deletions(-)
Non-test: 141 files changed, 2897 insertions(+), 3987 deletions(-)
All: 154 files changed, 4879 insertions(+), 4875 deletions(-)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCadWPyxQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK8QCAQD0i98miI1mu01RKuEwrBzmn7L/2sUH
ReYV/dFDtnN0GwD+KMCiNAM2XTVLRKq5t3OxPHpKZ4y+gZwRowAJeFA02Q8=
=5rip
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Migrate more hash algorithms from the traditional crypto subsystem to
lib/crypto/
Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:
- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)
- Support these algorithms in lib/crypto/ using the AES library
and the existing arm64 assembly code
- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library
- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later
- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits
- Enable optimizations by default
- GHASH
- Migrate the standalone GHASH code into lib/crypto/
- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation to
resist cache-timing attacks and use much less memory
- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from the
crypto_shash API, as it's no longer needed
- Enable optimizations by default
- SM3
- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it
- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms
- Testing improvements:
- Add a KUnit test suite for each of the new library APIs
- Migrate the existing ChaCha20Poly1305 test to KUnit
- Make the KUnit all_tests.config enable all crypto library tests
- Move the test kconfig options to the Runtime Testing menu
- Other updates to arch-optimized crypto code:
- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine
- Remove some MD5 implementations that are no longer worth keeping
- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64
- Make jitterentropy and samples/tsm-mr use the crypto library APIs
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (66 commits)
lib/crypto: arm64: Assume a little-endian kernel
arm64: fpsimd: Remove obsolete cond_yield macro
lib/crypto: arm64/sha3: Remove obsolete chunking logic
lib/crypto: arm64/sha512: Remove obsolete chunking logic
lib/crypto: arm64/sha256: Remove obsolete chunking logic
lib/crypto: arm64/sha1: Remove obsolete chunking logic
lib/crypto: arm64/poly1305: Remove obsolete chunking logic
lib/crypto: arm64/gf128hash: Remove obsolete chunking logic
lib/crypto: arm64/chacha: Remove obsolete chunking logic
lib/crypto: arm64/aes: Remove obsolete chunking logic
lib/crypto: Include <crypto/utils.h> instead of <crypto/algapi.h>
lib/crypto: aesgcm: Don't disable IRQs during AES block encryption
lib/crypto: aescfb: Don't disable IRQs during AES block encryption
lib/crypto: tests: Migrate ChaCha20Poly1305 self-test to KUnit
lib/crypto: sparc: Drop optimized MD5 code
lib/crypto: mips: Drop optimized MD5 code
lib: Move crypto library tests to Runtime Testing menu
crypto: sm3 - Remove 'struct sm3_state'
crypto: sm3 - Remove the original "sm3_block_generic()"
crypto: sm3 - Remove sm3_base.h
...
CRYPTO_DEV_VMX has been moved to arch/powerpc/crypto/Kconfig, remove it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The flexible array member 'buffer' in 'omap_sham_reqctx' is always
allocated with BUFLEN bytes. Replace the flexible array with a
fixed-size array and remove the now-redundant 'buflen' field.
Since 'struct omap_sham_reqctx' now includes the buffer, simplify
'reqsize' and 'statesize' and use an offsetof-based memcpy() in
omap_sham_export() and omap_sham_import().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When adf_dev_up() partially completes and then fails, the IRQ
handlers registered during adf_isr_resource_alloc() are not detached
before the MSI-X vectors are released.
Since the device is enabled with pcim_enable_device(), calling
pci_alloc_irq_vectors() internally registers pcim_msi_release() as a
devres action. On probe failure, devres runs pcim_msi_release() which
calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ
handlers (for example 'qat0-bundle0') are still attached. This causes
remove_proc_entry() warnings:
[ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0'
Moving the devm_add_action_or_reset() before adf_dev_up() does not solve
the problem since devres runs in LIFO order and pcim_msi_release(),
registered later inside adf_dev_up(), would still fire before
adf_device_down().
Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to
properly free IRQ handlers before devres releases the MSI-X vectors.
Fixes: 17fd7514ae ("crypto: qat - add qat_6xxx driver")
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Declare 'swap' as zero-initialized and use a single index variable to
simplify the byte-swapping loop in qce_xts_swapiv(). Add a comment for
clarity.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The direction used to map the buffer skreq->iv is DMA_TO_DEVICE but it is
unmapped with direction DMA_BIDIRECTIONAL in the error path.
Change the unmap to match the mapping.
Fixes: 915e4e8413 ("crypto: hisilicon - SEC security accelerator driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previous commit introduces a new last_request variable in the context
structure.
Renaming the first/last existing member variable in the context
structure to improve readability.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit c662b043cd ("crypto: af_alg/hash: Support
MSG_SPLICE_PAGES"), the crypto core may pass large scatterlists spanning
multiple pages to drivers supporting ahash operations. As a result, a
driver can now receive large ahash requests.
The SEC1 engine has a limitation where a single descriptor cannot
process more than 32k of data. The current implementation attempts to
handle the entire request within a single descriptor, which leads to
failures raised by the driver:
"length exceeds h/w max limit"
Address this limitation by splitting large ahash requests into multiple
descriptors, each respecting the 32k hardware limit. This allows
processing arbitrarily large requests.
Cc: stable@vger.kernel.org
Fixes: c662b043cd ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- sec_register_to_crypto() and sec_unregister_from_crypto()
have been removed, the function declarations have not been
removed. Remove them.
- hisi_qm_start_qp and hisi_qm_stop_qp are called internally by the
QM. Therefore, the EXPORT_SYMBOL_GPL declaration of these
non-public interfaces is deleted.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Variables are assigned before used. Initialization is not required.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Else condition is not needed after a return, remove it.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "info_name" is never changed in struct qm_cmd_dump_item,
make it const.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. The return value val of sec_debugfs_atomic64_get is of the
u64 type, but %lld instead of %llu is used in DEFINE_DEBUGFS_ATTRIBUTE.
Fix it.
2. In debugfs.c, since the types of q_depth and xeq_depth are u16,
the results of q_depth - 1 and xeq_depth - 1 are int rather than
u16. Use %d for int.
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the ZSTD algorithm for QAT GEN4, GEN5 and GEN6 via the
acomp API.
For GEN4 and GEN5, compression is performed in hardware using LZ4s, a
QAT-specific variant of LZ4. The compressed output is post-processed to
generate ZSTD sequences, and the ZSTD library is then used to produce
the final ZSTD stream via zstd_compress_sequences_and_literals(). Only
inputs between 8 KB and 512 KB are offloaded to the device. The minimum
size restriction will be relaxed once polling support is added. The
maximum size is limited by the use of pre-allocated per-CPU scratch
buffers. On these generations, only compression is offloaded to hardware;
decompression always falls back to software.
For GEN6, both compression and decompression are offloaded to the
accelerator, which natively supports the ZSTD algorithm. There is no
limit on the input buffer size supported. However, since GEN6 is limited
to a history size of 64 KB, decompression of frames compressed with a
larger history falls back to software.
Since GEN2 devices do not support ZSTD or LZ4s, add a mechanism that
prevents selecting GEN2 compression instances for ZSTD or LZ4s when a
GEN2 plug-in card is present on a system with an embedded GEN4, GEN5 or
GEN6 device.
In addition, modify the algorithm registration logic to allow
registering the correct implementation, i.e. LZ4s based for GEN4 and
GEN5 or native ZSTD for GEN6.
Co-developed-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace __builtin_bswap32() with swab32 in icp_qat_hw_20_comp.h to fix
the following build errors on architectures without native byte-swap
support:
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.o: in function `adf_gen4_build_decomp_block':
drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:141:(.text+0xeec): undefined reference to `__bswapsi2'
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:141:(.text+0xef8): undefined reference to `__bswapsi2'
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.o: in function `adf_gen4_build_comp_block':
drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:57:(.text+0xf64): undefined reference to `__bswapsi2'
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:57:(.text+0xf7c): undefined reference to `__bswapsi2'
Fixes: 5b14b2b307 ("crypto: qat - enable deflate for QAT GEN4")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603290259.Ig9kDOmI-lkp@intel.com/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In img_hash_digest(), remove the redundant return variable 'err' and
return img_hash_handle_queue() directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use list_first_entry_or_null() to simplify img_hash_digest() and remove
the now-unused local 'struct img_hash_dev *' variables. Use 'ctx->hdev'
when calling img_hash_handle_queue() instead of 'tctx->hdev'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enabling any template selects CRYPTO_MANAGER, which causes
CRYPTO_MANAGER2 to enable itself, which selects every algorithm type
option. However, pulling in all algorithm types is needed only when the
self-tests are enabled. So condition the selections accordingly.
To make this possible, also add the missing selections to various
symbols that were relying on transitive selections via CRYPTO_MANAGER.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace scatterwalk_map_and_copy() with memcpy_from_sglist() in
aspeed_ahash_dma_prepare(). The latter provides a simpler interface
without requiring a direction parameter, making the code easier to
read and less error-prone.
No functional change intended.
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the sequence of crypto_get_default_rng(),
crypto_rng_get_bytes(), and crypto_put_default_rng() with the equivalent
helper function crypto_stdrng_get_bytes().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the sequence of crypto_get_default_rng(),
crypto_rng_get_bytes(), and crypto_put_default_rng() with the equivalent
helper function crypto_stdrng_get_bytes().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cpu counter used to compute the IAA device index is reset to zero
at the start of each NUMA node iteration. This causes CPUs on every
node to map starting from IAA index 0 instead of continuing from the
previous node's last index. On multi-node systems, this results in all
nodes mapping their CPUs to the same initial set of IAA devices,
leaving higher-indexed devices unused.
Move the cpu counter initialization before the for_each_node_with_cpus()
loop so that the IAA index computation accumulates correctly across all
nodes.
Fixes: 714ca27e9b ("crypto: iaa - Optimize rebalance_wq_table()")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace scnprintf() with sysfs_emit() in the three RAS error counter
sysfs show callbacks. sysfs_emit() is the recommended API for sysfs show
functions as per Documentation/filesystems/sysfs.rst; it enforces the
PAGE_SIZE limit implicitly, removing the need to pass it explicitly.
Signed-off-by: Atharv Dubey <atharvd440@gmail.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ADF_RAS_ERR_CTR_READ() expands to atomic_read(), which returns int.
The local variable 'counter' was declared as 'unsigned long', causing
a type mismatch on the assignment. The format specifier '%ld' was
consequently wrong in two ways: wrong length modifier and wrong
signedness.
Use int to match the return type of atomic_read() and update the
format specifier to '%d' accordingly.
Fixes: 532d7f6bc4 ("crypto: qat - add error counters")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
qat_comp_alg_init_tfm() acquires a compression instance via
qat_compression_get_instance_node() before calling qat_comp_build_ctx()
to initialize the compression context. If qat_comp_build_ctx() fails, the
function returns an error without releasing the compression instance,
causing a resource leak.
When qat_comp_build_ctx() fails, release the compression instance with
qat_compression_put_instance() and clear the context to avoid leaving a
stale reference to the released instance.
The issue was introduced when build_deflate_ctx() (which always returned
void) was replaced by qat_comp_build_ctx() (which can return an error)
without adding error handling for the failure path.
Fixes: cd0e7160f8 ("crypto: qat - refactor compression template logic")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the usage of crypto_acomp_tfm() followed by crypto_tfm_ctx()
with a single call to the equivalent acomp_tfm_ctx().
This does not introduce any functional changes.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace snprintf("%s") with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Check if the return value is less than 0 to detect string truncation.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The get_ae_mask() function only disables individual engines based on
the fuse register, but engines are organized in clusters of 4. If the
lead engine of a cluster is fused off, the entire cluster must be
disabled.
Replace the single bitmask inversion with explicit test_bit() checks
on the lead engine of each group, disabling the full ADF_AE_GROUP
when the lead bit is set.
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The get_ae_mask() function only disables individual engines based on
the fuse register, but engines are organized in clusters of 4. If the
lead engine of a cluster is fused off, the entire cluster must be
disabled.
Replace the single bitmask inversion with explicit test_bit() checks
on the lead engine of each group, disabling the full ADF_AE_GROUP
when the lead bit is set.
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: 8c8268166e ("crypto: qat - add qat_4xxx driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Add missing async markers to tegra.
- Fix long hmac key DMA handling in caam.
- Fix spurious ENOSPC errors in deflate.
- Fix SG chaining in af_alg.
- Do not use in-place process in algif_aead.
- Fix out-of-place destination overflow in authencesn.
-----BEGIN PGP SIGNATURE-----
iQIyBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmnPB8sACgkQxycdCkmx
i6eSVg/3fDIS9Sjf7yiFrjefCbBc9uCbey+BGVEY3cdKNHDAysbhDdAGqT4tVsJb
w7Vn9AJ+DPGQGyadgsDuF5KmsewivKFl0gJzuKG2DNUIjTYctGJubfyiriUt1P+2
rQ7R9BBQMrbUbV0KQi/q4WlnYDJanNxcCz+cVrhDYFIjTGnu4BOun6LIhcAFlrpB
0jeVPtUZJNLPCrFNjvIdS73uE6/Y7M+u+QQ4/WQo/bhCqn6brrallB030UFUQiji
SqLKL4/2fIMUzbZ5GifKz8WSNAKpGStUYyzN6MpSsprJd6opyvjeTfyup6bwJe/8
+nLUJ8PYAQ9p3XNe2YwTc0bAfbN2QgjhPJ3Gu9alLBKzj3O6JTwEwddqx4LMYgue
RbOEZOBHLj/VJzxGWL84gq5HGCOaOG39xAOKny458EaUjUUrepXpp7WV3Ql6lfD7
eGZ+pHVOXUkmwcXBxE2EcD7Gb1t9F7bmhq8Y+yfi0ImzTeadFJzzCMn1K/e1zhHM
RjTWmVF4eNTjLhPc27FOCcervEYmxwdhuQHRTbuyLyhNdkiVsMWaj5rCgggA6Uug
bNzBYYvK0ColVCLJAy6hDU/AvYyyz22L1QodPjOGe6DJaAblrZaGETepLF0lGnpf
9//i1EaZmNPrLYifNNgkjT2xCuQZbbO3kWuTpwWtgddId0zoyA==
=CJbs
-----END PGP SIGNATURE-----
Merge tag 'v7.0-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Add missing async markers to tegra
- Fix long hmac key DMA handling in caam
- Fix spurious ENOSPC errors in deflate
- Fix SG chaining in af_alg
- Do not use in-place process in algif_aead
- Fix out-of-place destination overflow in authencesn
* tag 'v7.0-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption
crypto: algif_aead - Revert to operating out-of-place
crypto: af-alg - fix NULL pointer dereference in scatterwalk
crypto: deflate - fix spurious -ENOSPC
crypto: caam - fix overflow on long hmac keys
crypto: caam - fix DMA corruption on long hmac keys
crypto: tegra - Add missing CRYPTO_ALG_ASYNC
After SNP is disabled, any pages allocated as HV_FIXED can now be freed.
Update the page state of these pages and the snp_leak_hv_fixed_pages()
function to free pages on SNP_SHUTDOWN.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260324161301.1353976-8-tycho@kernel.org
The SEV firmware has support to disable SNP during an SNP_SHUTDOWN_EX command.
Verify that this support is available and set the flag so that SNP is disabled
when it is not being used.
In cases where SNP is disabled, skip the call to amd_iommu_snp_disable(), as
all of the IOMMU pages have already been made shared. Also skip the panic
case, since snp_shutdown() does IPIs.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260324161301.1353976-7-tycho@kernel.org
Now that there is snp_prepare() that indicates when the CCP driver wants to
prepare the architecture for SNP_INIT(_EX), move this architecture-specific
bit of code to a more sensible place.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260324161301.1353976-6-tycho@kernel.org
Use the new snp_prepare() to initialize SNP from the ccp driver instead of at
boot time. This means that SNP is not enabled unless it is really going to be
used (i.e. kvm_amd loads the ccp driver automatically).
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260324161301.1353976-5-tycho@kernel.org
Replace memset() followed by memcpy() with memcpy_and_pad() to simplify
the code and to write to ->auth_key only once.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the missing > characters to the end of the email address
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Correct the typo in the name "ecb(des-eip93)".
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During packet transmission, if the system is under heavy load,
the hardware might complete processing the packet and free the
request memory (req) before the transmission function finishes.
If the software subsequently accesses this req, a use-after-free
error will occur. The qp_ctx memory exists throughout the packet
sending process, so replace the req with the qp_ctx.
Fixes: f0ae287c50 ("crypto: hisilicon/sec2 - implement full backlog mode for sec")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Econet SoCs feature an integrated EIP93 in revision 3.0p1. It is identical
to the one used by the Airoha AN7581 and the MediaTek MT7621. Ahmed reports
that the EN7528 passes testmgr's self-tests. This driver should also work
on other little endian Econet SoCs.
CC: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Tested-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AES-CCM is an AEAD algorithm supporting both encryption and
authentication of data. This patch introduces support for AES-CCM AEAD
algorithm in the DTHEv2 driver.
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AES-GCM is an AEAD algorithm supporting both encryption and
authentication of data. This patch introduces support for AES-GCM as the
first AEAD algorithm supported by the DTHEv2 driver.
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use list_first_entry_or_null() to simplify stm32_cryp_find_dev() and
remove the now-unused local variable 'struct stm32_cryp *tmp'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use list_first_entry_or_null() to simplify stm32_hash_find_dev() and
remove the now-unused local variable 'struct stm32_hash_dev *tmp'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Anti-Rollback (ARB) is a QAT GEN6 hardware feature that prevents loading
firmware with a Security Version Number (SVN) lower than an authorized
minimum. This protects against downgrade attacks by ensuring that only
firmware at or above a committed SVN can run on the acceleration device.
During firmware loading, the driver checks the SVN validation status via
a hardware CSR. If the check reports a failure, firmware authentication
is aborted. If it reports a retry status, the driver reissues the
authentication command up to a maximum number of retries.
Extend the firmware admin interface with two new messages,
ICP_QAT_FW_SVN_READ and ICP_QAT_FW_SVN_COMMIT, to query and commit the
SVN, respectively. Integrate the SVN check into the firmware
authentication path in qat_uclo.c so the driver can react to
anti-rollback status during device bring-up.
Expose SVN information to userspace via a new sysfs attribute group,
qat_svn, under the PCI device directory. The group provides read-only
attributes for the active, enforced minimum, and permanent minimum SVN
values, as well as a write-only commit attribute that allows a system
administrator to commit the currently active SVN as the new authorized
minimum.
This is based on earlier work by Ciunas Bennett.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in
hash_digest_key() to avoid leaking secrets at runtime when
CONFIG_DYNAMIC_DEBUG is enabled.
Fixes: 045e36780f ("crypto: caam - ahash hmac support")
Fixes: 3f16f6c9d6 ("crypto: caam/qi2 - add support for ahash algorithms")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the __counted_by() compiler attribute to the flexible array member
'group' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace memset() followed by memcpy() with memcpy_and_pad() to simplify
the code and to write to 'cache' only once.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace multiple for loops with calls to crypto_unregister_ahashes() and
crypto_unregister_skciphers().
If crypto_register_skcipher() fails in s5p_aes_probe(), log the error
directly instead of checking 'i < ARRAY_SIZE(algs)' later. Also drop
now-unused local index variables. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a key longer than block size is supplied, it is copied and then
hashed into the real key. The memory allocated for the copy needs to
be rounded to DMA cache alignment, as otherwise the hashed key may
corrupt neighbouring memory.
The copying is performed using kmemdup, however this leads to an overflow:
reading more bytes (aligned_len - keylen) from the keylen source buffer.
Fix this by replacing kmemdup with kmalloc, followed by memcpy.
Fixes: 199354d7fb ("crypto: caam - Remove GFP_DMA and add DMA alignment padding")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a key longer than block size is supplied, it is copied and then
hashed into the real key. The memory allocated for the copy needs to
be rounded to DMA cache alignment, as otherwise the hashed key may
corrupt neighbouring memory.
The rounding was performed, but never actually used for the allocation.
Fix this by replacing kmemdup with kmalloc for a larger buffer,
followed by memcpy.
Fixes: 199354d7fb ("crypto: caam - Remove GFP_DMA and add DMA alignment padding")
Reported-by: Paul Bunyan <pbunyan@redhat.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its
asynchronous algorithms, causing the crypto API to select them for users
that request only synchronous algorithms. This causes crashes (at
least). Fix this by adding the flag like what the other drivers do.
Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just
get ignored and overridden by the registration function anyway.
Reported-by: Zorro Lang <zlang@redhat.com>
Closes: https://lore.kernel.org/r/20260314080937.pghb4aa7d4je3mhh@dell-per750-06-vm-08.rhts.eng.pek2.redhat.com
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Cc: stable@vger.kernel.org
Cc: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update one driver that used sizeof(struct sm3_state) to use
sizeof(struct sm3_ctx) instead. Then, remove struct sm3_state and
SM3_STATE_SIZE.
This completes the replacement of struct sm3_state with struct sm3_ctx.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reimplement the "sm3" crypto_shash on top of the SM3 library, closely
mirroring the other hash algorithms (e.g. SHA-*).
The result, after later commits migrate the architecture-optimized SM3
code into the library as well, is that crypto/sm3.c will be the single
point of integration between crypto_shash and the actual SM3
implementations, simplifying the code.
Note: to see the diff from crypto/sm3_generic.c to crypto/sm3.c, view
this commit with 'git show -M10'.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The kconfig options for generic crypto API modules have traditionally
*not* had a "_GENERIC" suffix. Also, the "_GENERIC" suffix will make
even less sense once the architecture-optimized SM3 code is moved into
lib/crypto/ and the "sm3" crypto_shash is reimplemented on top of that.
Thus, rename CRYPTO_SM3_GENERIC to CRYPTO_SM3.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Make the "gcm" template access GHASH using the library API instead of
crypto_ahash. This is much simpler and more efficient, especially given
that all GHASH implementations are synchronous and CPU-based anyway.
Note that this allows "ghash" to be removed from the crypto_ahash (and
crypto_shash) API, which a later commit will do.
This mirrors the similar cleanup that was done with POLYVAL.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-16-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Unregister the hwrng to prevent new ->read() calls and flush the Atmel
I2C workqueue before teardown to prevent a potential UAF if a queued
callback runs while the device is being removed.
Drop the early return to ensure sysfs entries are removed and
->hwrng.priv is freed, preventing a memory leak.
Fixes: da001fb651 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The accelerator device supports usage statistics. This patch enables
obtaining the accelerator's usage through the "dev_usage" file.
The returned number expressed as a percentage as a percentage.
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the scomp conversion, nx842_crypto_alloc_ctx() allocates the
context separately, but nx842_crypto_free_ctx() never releases it. Add
the missing kfree(ctx) to nx842_crypto_free_ctx(), and reuse
nx842_crypto_free_ctx() in the allocation error path.
Fixes: 980b5705f4 ("crypto: nx - Migrate to scomp API")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The bounce buffers are allocated with __get_free_pages() using
BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error
path and nx842_crypto_free_ctx() release the buffers with free_page().
Use free_pages() with the matching order instead.
Fixes: ed70b479c2 ("crypto: nx - add hardware 842 crypto comp alg")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure the device supports XTS and GCM with 'has_xts' and 'has_gcm'
before unregistering algorithms when XTS or authenc registration fails,
which would trigger a WARN in crypto_unregister_alg().
Currently, with the capabilities defined in atmel_aes_get_cap(), this
bug cannot happen because all devices that support XTS and authenc also
support GCM, but the error handling should still be correct regardless
of hardware capabilities.
Fixes: d52db5188a ("crypto: atmel-aes - add support to the XTS mode")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add wireless mode support for QAT GEN6 devices.
When the WCP_WAT fuse bit is clear, the device operates in wireless
cipher mode (wcy_mode). In this mode all accelerator engines load the
wireless firmware and service configuration via 'cfg_services' sysfs
attribute is restricted to 'sym' only.
The get_accel_cap() function is extended to report wireless-specific
capabilities (ZUC, ZUC-256, 5G, extended algorithm chaining) gated by
their respective slice-disable fuse bits. The set_ssm_wdtimer() function
is updated to configure WCP (wireless cipher) and WAT (wireless
authentication) watchdog timers. The adf_gen6_cfg_dev_init() function is
updated to use adf_6xxx_is_wcy() to enforce sym-only service selection
for WCY devices during initialization.
Co-developed-by: Aviraj Cj <aviraj.cj@intel.com>
Signed-off-by: Aviraj Cj <aviraj.cj@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
atmel_aes_buff_init() allocates 4 pages using __get_free_pages() with
ATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only the
first page using free_page(), leaking the remaining 3 pages. Use
free_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak.
Fixes: bbe628ed89 ("crypto: atmel-aes - improve performances of data transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Softirqs must be disabled when calling the finalization fucntion on
a request.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use memcpy_and_pad() instead of memcpy() followed by memset() to
simplify artpec6_crypto_prepare_hash().
Also fix a duplicate word in a comment and remove a now-redundant one.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Disable the "padlock" SHA-1 and SHA-256 driver on Zhaoxin
processors, since it does not compute hash values correctly.
- Make a generated file be removed by 'make clean'.
- Fix excessive stack usage in some of the arm64 AES code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCabshQRQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK+iGAQCeIUVBldIXHGJ4SS/P3rNMLfAbPl1q
AInsse2HAGcSTQEA+ZdAId7G+K8IhJN0cBCNHBgSh4zKQN/QPwSTA4UyIwc=
=UBud
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Disable the "padlock" SHA-1 and SHA-256 driver on Zhaoxin
processors, since it does not compute hash values correctly
- Make a generated file be removed by 'make clean'
- Fix excessive stack usage in some of the arm64 AES code
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc: Add powerpc/aesp8-ppc.S to clean-files
crypto: padlock-sha - Disable for Zhaoxin processor
crypto: arm64/aes-neonbs - Move key expansion off the stack
Use list_first_entry_or_null() to simplify atmel_sha_find_dev() and
remove the now-unused local variable 'struct atmel_sha_dev *tmp'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before DMA output is consumed by the CPU, ->dma_addr_out must be synced
with dma_sync_single_for_cpu() instead of dma_sync_single_for_device().
Using the wrong direction can return stale cache data on non-coherent
platforms.
Fixes: 13802005d8 ("crypto: atmel - add Atmel DES/TDES driver")
Fixes: 1f858040c2 ("crypto: atmel-tdes - add support for latest release of the IP (0x700)")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register hash before hmac and authenc algorithms. This will ensure
selftests pass at startup. Previously, selftests failed on the
crypto_alloc_ahash() function since the associated algorithm was
not yet registered.
Fixes following error:
...
[ 18.375811] alg: self-tests for authenc(hmac(sha1),cbc(aes)) using authenc(hmac(sha1-eip93),cbc(aes-eip93)) failed (rc=-2)
[ 18.382140] alg: self-tests for authenc(hmac(sha224),rfc3686(ctr(aes))) using authenc(hmac(sha224-eip93),rfc3686(ctr(aes-eip93))) failed (rc=-2)
[ 18.395029] alg: aead: authenc(hmac(sha256-eip93),cbc(des-eip93)) setkey failed on test vector 0; expected_error=0, actual_error=-2, flags=0x1
[ 18.409734] alg: aead: authenc(hmac(md5-eip93),cbc(des3_ede-eip93)) setkey failed on test vector 0; expected_error=0, actual_error=-2, flags=0x1
...
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT GEN6 hardware requires a minimum 3 us delay during the acceleration
engine reset sequence to ensure the hardware fully settles.
Without this delay, the firmware load may fail intermittently.
Add a delay after placing the AE into reset and before clearing the reset,
matching the hardware requirements and ensuring stable firmware loading.
Earlier generations remain unaffected.
Fixes: 17fd7514ae ("crypto: qat - add qat_6xxx driver")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The macros in qat_hal.c were using a mixture of tabs and spaces.
Update all macro indentation to use tabs consistently, matching the
predominant style.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For Zhaoxin processors, the XSHA1 instruction requires the total memory
allocated at %rdi register must be 32 bytes, while the XSHA1 and
XSHA256 instruction doesn't perform any operation when %ecx is zero.
Due to these requirements, the current padlock-sha driver does not work
correctly with Zhaoxin processors. It cannot pass the self-tests and
therefore does not activate the driver on Zhaoxin processors. This issue
has been reported in Debian [1]. The self-tests fail with the
following messages [2]:
alg: shash: sha1-padlock-nano test failed (wrong result) on test vector 0, cfg="init+update+final aligned buffer"
alg: self-tests for sha1 using sha1-padlock-nano failed (rc=-22)
alg: shash: sha256-padlock-nano test failed (wrong result) on test vector 0, cfg="init+update+final aligned buffer"
alg: self-tests for sha256 using sha256-padlock-nano failed (rc=-22)
Disable the padlock-sha driver on Zhaoxin processors with the CPU family
0x07 and newer. Following the suggestion in [3], support for PHE will be
added to lib/crypto/ instead.
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1113996
[2] https://linux-hardware.org/?probe=271fabb7a4&log=dmesg
[3] https://lore.kernel.org/linux-crypto/aUI4CGp6kK7mxgEr@gondor.apana.org.au/
Fixes: 63dc06cd12 ("crypto: padlock-sha - Use API partial block handling")
Cc: stable@vger.kernel.org
Signed-off-by: AlanSong-oc <AlanSong-oc@zhaoxin.com>
Link: https://lore.kernel.org/r/20260313080150.9393-2-AlanSong-oc@zhaoxin.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
sev_do_cmd() has its own command buffer (sev->cmd_buf) with the correct
alignment, perms, etc. that it copies the command into, so prepending it to
the firmware data is unnecessary.
Switch sev_update_firmware() to using a stack allocated command in light of
this copy, and drop all of the resulting pointer math.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In qce_aead_done(), the return variable 'ret' is no longer used - remove
it. And qce_aead_prepare_dst_buf() jumps directly to 'dst_tbl_free:' on
error and returns 'sg' - drop the useless 'ret' assignments.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 551120148b ("crypto: ccp - Fix a case where SNP_SHUTDOWN is
missed") fixed a case where SNP is left in INIT state if page reclaim
fails. It removes the transition to the INIT state for this command and
adjusts the page state management.
While doing this, it added a call to snp_leak_pages() after a call to
snp_reclaim_pages() failed. Since snp_reclaim_pages() already calls
snp_leak_pages() internally on the pages it fails to reclaim, calling
it again leaks the exact same page twice.
Fix by removing the extra call to snp_leak_pages().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Assisted-by: Gemini:gemini-3.1-pro
Fixes: 551120148b ("crypto: ccp - Fix a case where SNP_SHUTDOWN is missed")
Cc: Tycho Andersen (AMD) <tycho@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the "aes" module to implement "cmac(aes)", "xcbc(aes)", and
"cbcmac(aes)" algorithms using the corresponding library functions, and
register these with the crypto_shash API. Each algorithm is included
only if the corresponding existing kconfig option is enabled.
This allows the architecture-optimized implementations of these
algorithms to continue to be accessible via the crypto_shash API once
they are migrated into the library.
For "xcbc(aes)", I also fixed the bug where AES key lengths other than
128 bits were allowed, so that this bug didn't have to be implemented in
the library. The AES-XCBC-MAC specification (RFC 3566) is clear that
key lengths other than 128 bits MUST NOT be supported. AES-XCBC-MAC
derives a 128-bit subkey internally, so the nonstandard support for
longer AES keys didn't really work: AES-128 was still used internally.
In the unlikely event that someone is actually relying on the broken and
nonstandard support for longer AES-XCBC-MAC keys, we can fairly easily
reintroduce it. But it seems unnecessary: the only user of "xcbc(aes)"
seems to be IPsec, which uses 128-bit keys with it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260218213501.136844-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Return sysfs_emit() directly and drop 'ret' in cap_rem_show().
In cap_rem_store(), use 'ret' when calling set_param_u() instead of
assigning it to 'val' first, and remove 'val'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for CTR mode of operation for AES algorithm in the AES
Engine of the DTHEv2 hardware cryptographic engine.
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CONFIG_CRYPTO_DEV_VMX has been moved to arch/powerpc - delete the
disabled build directive.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call atmel_ecc_i2c_client_free() to release the I2C client reserved by
atmel_ecc_i2c_client_alloc() when crypto_alloc_kpp() fails. Otherwise
->tfm_count will be out of sync.
Fixes: 11105693fa ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return early if atmel_i2c_send_receive() fails to avoid checking
potentially uninitialized data in 'cmd.data'.
Cc: stable@vger.kernel.org
Fixes: e05ce444e9 ("crypto: atmel-sha204a - add reading from otp zone")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix otp_show() to read and print all 64 bytes of the OTP zone.
Previously, the loop only printed half of the OTP (32 bytes), and
partial output was returned on read errors.
Propagate the actual error from atmel_sha204a_otp_read() instead of
producing partial output.
Replace sprintf() with sysfs_emit_at(), which is preferred for
formatting sysfs output because it provides safer bounds checking.
Cc: stable@vger.kernel.org
Fixes: 13909a0c88 ("crypto: atmel-sha204a - provide the otp content")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return -EINVAL from atmel_i2c_init_read_otp_cmd() on invalid addresses
instead of -1. Since the OTP zone is accessed in 4-byte blocks, valid
addresses range from 0 to OTP_ZONE_SIZE / 4 - 1. Fix the bounds check
accordingly.
In atmel_sha204a_otp_read(), propagate the actual error code from
atmel_i2c_init_read_otp_cmd() instead of -1. Also, return -EIO instead
of -EINVAL when the device is not ready.
Cc: stable@vger.kernel.org
Fixes: e05ce444e9 ("crypto: atmel-sha204a - add reading from otp zone")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Checked the register definitions with the documentation[1]. Turns out
that the PKTE_INBUF_CNT register has a bad offset. It's used in Direct
Host Mode (DHM). The driver uses Autonomous Ring Mode (ARM), so it
causes no harm.
1. ADSP-SC58x/ADSP-2158x SHARC+ Processor Hardware Reference
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The only generic interface to execute asynchronously in the BH context
is tasklet; however, it's marked deprecated and has some design flaws
such as the execution code accessing the tasklet item after the
execution is complete which can lead to subtle use-after-free in certain
usage scenarios and less-developed flush and cancel mechanisms.
To replace tasklets, BH workqueue support was recently added. A BH
workqueue behaves similarly to regular workqueues except that the queued
work items are executed in the BH context.
Convert virtio_crypto_core.c from tasklet to BH workqueue.
Semantically, this is an equivalent conversion and there shouldn't be
any user-visible behavior changes. The BH workqueue implementation uses
the same softirq infrastructure, and performance-critical networking
conversions have shown no measurable performance impact.
Signed-off-by: Pat Somaru <patso@likewhatevs.io>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the following AEAD ciphersuites:
- authenc(hmac(md5),cbc(aes))
- authenc(hmac(md5),cbc(des)))
- authenc(hmac(md5),cbc(des3_ede))
- authenc(hmac(md5),rfc3686(ctr(aes)))
The first three ciphersuites were tested using testmgr and the recently
sent test vectors. They passed self-tests.
This is enhanced version of the patch found in the mtk-openwrt-feeds repo.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move authenc(sha1,des) and authenc(sha1,3des) ciphersuites to appropriate
groups. No functional changes intended.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace scnprintf("%s", ...) with the faster and more direct strscpy().
Remove the parentheses while we're at it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If memory allocation fails, decrement ->tfm_count to avoid blocking
future reads.
Cc: stable@vger.kernel.org
Fixes: da001fb651 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the error path of sev_tsm_init_locked(), the code dereferences 't'
after it has been freed with kfree(). The pr_err() statement attempts
to access t->tio_en and t->tio_init_done after the memory has been
released.
Move the pr_err() call before kfree(t) to access the fields while the
memory is still valid.
This issue reported by Smatch static analyser
Fixes:4be423572da1 ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When SEV is disabled, the HV-Fixed page allocation call fails, which in
turn causes SFS initialization to fail.
Fix the HV-Fixed API so callers (for example, SFS) can use it even when
SEV is disabled by performing normal page allocation and freeing.
Fixes: e09701dcdd ("crypto: ccp - Add new HV-Fixed page allocation/free API")
Cc: stable@vger.kernel.org
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
amd/pmf:
- Added a module parameter to disable the Smart PC function
- Introduce new interface to export NPU metrics
- Prevent TEE errors after hibernate
- Use ring buffer to store custom BIOS input values
amd:
- Use scope-based cleanup for wbrf_record()
asus-wmi:
- add keyboard brightness event handler
- Add support for multiple kbd led handlers
- remove unused keyboard backlight quirk
crypto:
- ccp - Add an S4 restore flow
- ccp - Declare PSP dead if PSP_CMD_TEE_RING_INIT fails
- ccp - Factor out ring destroy handling to a helper
- ccp - Send PSP_CMD_TEE_RING_DESTROY when PSP_CMD_TEE_RING_INIT fails
HID: asus:
- add support for the asus-wmi brightness handler
- early return for ROG devices
- fortify keyboard handshake
- initialize additional endpoints only for certain devices
- listen to the asus-wmi brightness device instead of creating one
- move vendor initialization to probe
- simplify RGB init sequence
- use same report_id in response
hp-wmi:
- Add EC offsets to read Victus S thermal profile
- add manual fan control for Victus S models
- fix platform profile values for Omen 16-wf1xxx
- implement fan keep-alive
- order include headers
ideadpad-laptop:
- Clean up style warnings and checks
intel/pmc:
- Change LPM mode fields to u8
- Enable substate residencies for multiple PMCs
- Move LPM mode attributes to PMC
- Remove double empty line
intel/pmt:
- Replace sprintf() with sysfs_emit()
intel/uncore-freq:
- Replace sprintf() with scnprintf()
- Replace sprintf() with sysfs_emit()
intel-wmi-sbl-fw-update:
- Use new buffer-based WMI API
intel/wmi: thunderbolt:
- Use new buffer-based WMI API
ISST:
- Add missing write block check
- Check for admin capability for write commands
- Optimize suspend/resume callbacks
- Store and restore all domains data
lenovo-wmi-capdata:
- Add support for Capability Data 00
- Add support for Fan Test Data
lenovo-wmi-{capdata,other}:
- Fix HWMON channel visibility
- Support multiple Capability Data
lenovo-wmi-capdata:
- Wire up Fan Test Data
lenovo-wmi-helpers:
- Convert returned buffer into u32
lenovo-wmi-other:
- Add HWMON for fan reporting/tuning
mlx-platform:
- Add support DGX flavor of next-generation 800GB/s ethernet switch.
- Add support for new Nvidia DGX system based on class VMOD0010
Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata:
- Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata
surface: aggregator_registry:
- Add Surface Pro 11 (QCOM)
surface:
- Replace deprecated strcpy() in surface_button_add()
thinkpad_acpi:
- Add support to detect hardware damage detection capability.
- Add sysfs to display details of damaged device.
tools/power/x86/intel-speed-select:
- Allow non root users
- Fix file descriptor leak in isolate_cpus()
- Use pkg-config for libnl-3.0 detection
- v1.25 release
uniwill:
- Implement cTGP setting
uniwill-laptop:
- Introduce device descriptor system
wmi:
- Add helper functions for WMI string conversions
- Add kunit test for the marshalling code
- Add kunit test for the string conversion code
wmi-bmof:
- Use new buffer-based WMI API
wmi:
- Introduce marshalling support
wmi: string-kunit:
- Add missing oversized string test case
wmi:
- Update driver development guide
xiaomi-wmi:
- Use new buffer-based WMI API
yogabook:
- Clean up code style
Merges:
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
- Merge branch 'platform-drivers-x86-asus-kbd' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaY9soAAKCRBZrE9hU+XO
MT5EAP9aK1wHlVGDfuC2k07X4gk8ZX5Ks9anXJlBcZFrpC9okwD5Aeqj3XLK338x
g5k/x+r87GwXjcBLnFi2TnNA2c8SWQY=
=eGAm
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors.
- Use pin_init::zeroed() for fops initialization.
- Annotate DRM helpers with __rust_helper.
- Improve safety documentation for gem::Object::new().
- Update AlwaysRefCounted imports.
- mm: Prevent integer overflow in page_align().
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switched to use virtual planes by default
- Fixed DSI CMD panels on DPU 3.x
- Rewrote format handling to remove intermediate representation
- Fixed watchdog on DPU 8.x+
- Fixed TE / Vsync source setting on DPU 8.x+
- Added 3D_Mux on SC7280
- Kaanapali platform support
- Fixed UBWC register programming
- Made RM reserve DSPP-enabled mixers for CRTCs with LMs.
- Gamma correction support
- DP:
- Enabled support for eDP 1.4+ link rate tables
- Fixed MDSS1 DP indices on SA8775P, making them to work
- Fixed msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Documented QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switched to divider_determine_rate()
- MDP5:
- Dropped support for MSM8998, SDM660 and SDM630 (switched over
to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation.
- Get rid of the Result<impl PinInit<T, E>> anti-pattern.
- Relocate initializer-specific code into the appropriate initializer.
- Use CStr::from_bytes_until_nul() to remove custom helpers.
- Improve handling of unexpected firmware values.
- Clean up redundant debug prints.
- Replace c_str!() with native Rust C-string literals.
- Update nova-core task list.
nova:
- Align GEM object size to system page size.
tyr:
- Use generated uAPI bindings for GpuInfo.
- Replace manual sleeps with read_poll_timeout().
- Replace c_str!() with native Rust C-string literals.
- Suppress warnings for unread fields.
- Fix incorrect register name in print statement.
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
-----BEGIN PGP SIGNATURE-----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=RFJ2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
The existing allocation of scatterlists in omap_crypto_copy_sg_lists()
was allocating an array of scatterlist pointers, not scatterlist objects,
resulting in a 4x too small allocation.
Use sizeof(*new_sg) to get the correct object size.
Fixes: 74ed87e7e7 ("crypto: omap - add base support library for common routines")
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
API:
- Fix race condition in hwrng core by using RCU.
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode.
- Add test vectors for authenc(hmac(sha384),cbc(aes)).
- Add test vectors for authenc(hmac(sha224),cbc(aes)).
- Add test vectors for authenc(hmac(md5),cbc(des3_ede)).
- Add lz4 support in hisi_zip.
- Only allow clear key use during self-test in s390/{phmac,paes}.
Drivers:
- Set rng quality to 900 in airoha.
- Add gcm(aes) support for AMD/Xilinx Versal device.
- Allow tfms to share device in hisilicon/trng.
-----BEGIN PGP SIGNATURE-----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=n4fL
-----END PGP SIGNATURE-----
Merge tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaYlV8xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK1ffAQCbM+cnqF4ThspBCgLZGSScx02KsA4U
dQblKoOFyIEbnwEA1ElJNhNQs2m7AT+R0hOh6yI+5+ttUfqLMT9tuNs2mwM=
=iZ06
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
Replace the for loops with calls to crypto_unregister_ahashes(). In
img_register_algs(), return 'err' immediately and remove the goto
statement to simplify the error handling code.
Convert img_unregister_algs() to a void function since its return value
is never used.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return the result of calling crypto_dequeue_request() directly and
remove the local return variable.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The starfive_aes_aead_do_one_req() function allocates rctx->adata with
kzalloc() but fails to free it if sg_copy_to_buffer() or
starfive_aes_hw_init() fails, which lead to memory leaks.
Since rctx->adata is unconditionally freed after the write_adata
operations, ensure consistent cleanup by freeing the allocation in these
earlier error paths as well.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 7467147ef9 ("crypto: starfive - Use dma for aes requests")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace multiple for loops with calls to crypto_unregister_aeads(),
crypto_unregister_ahashes(), and crypto_unregister_skciphers().
Remove the definition of atmel_tdes_unregister_algs() because it is
equivalent to calling crypto_unregister_skciphers() directly, and the
function parameter 'struct atmel_tdes_dev *' is unused anyway.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The boot integrity attribute represents that the CPU or APU is used for the
hardware root of trust in the boot process. This bit only represents the
CPU/APU and some vendors have other hardware root of trust implementations
specific to their designs.
Link: https://github.com/fwupd/fwupd/pull/9825
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When commit 0e1a4d427f ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios.
Fixes: 0e1a4d427f ("crypto: caam: Unembed net_dev structure in dpaa2")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The device requires more time to process queue stop and function stop
mailbox commands compared to other mailbox commands . In the current
driver, the mailbox processing wait time for queue stop and function
stop is less than the device timeout, which may cause the driver to
incorrectly assume that the mailbox processing has failed. Therefore,
the driver wait time for queue stop and function stop should be set to
be greater than the device timeout. And PF and VF communication
relies on mailbox, the communication wait time should also be modified.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The malibox needs to be triggered by a 128bit atomic operation.
The reason is that the PF and VFs of the device share the mmio memory
of the mailbox, and the mutex cannot lock mailbox operations in
different functions, especially when passing through VFs to
virtual machines.
Currently, the write operation to the mailbox is already a 128-bit
atomic write. The read operation also needs to be modified to a
128-bit atomic read. Since there is no general 128-bit IO memory
access API in the current ARM64 architecture, and the stp and ldp
instructions do not guarantee atomic access to device memory, they
cannot be extracted as a general API. Therefore, the 128-bit atomic
read and write operations need to be implemented in the driver.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the HiSilicon accelerator is used only on the
ARM64 architectures, the implementations for other
architectures are not needed, so remove the unnecessary code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before sending the data via the mailbox to the hardware, to ensure
that the data accessed by the hardware is the most up-to-date,
a write barrier should be added before writing to the mailbox register.
The current memory barrier is placed after writing to the register,
the barrier order should be modified to be before writing to the register.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the number of devices is limited, and the number
of tfms may exceed the number of devices, to ensure that
tfms can be successfully allocated, support tfms
sharing the same device.
Fixes: e4d9d10ef4 ("crypto: hisilicon/trng - add support for PRNG")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the "hisi-lz4-acomp" algorithm by the crypto acomp. When the
8th bit of the capability register is 1, the lz4 algorithm will
register to crypto acomp, and the window length is configured to
16K by default.
Since the "hisi-lz4-acomp" currently only support compression
direction, decompression is completed by the soft lz4 algorithm.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In most cases, min_t(size_t) and explicit casting are unnecessary
because the values ->hw_blocksize, ->payload_{in,out}, and ->header_in
are already of type 'size_t'. Use the simpler min() macro instead.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With multiple virtio crypto devices supported with different NUMA
nodes, when crypto session is created, it will search virtio crypto
device with the same numa node of current CPU.
Here API topology_physical_package_id() is replaced with cpu_to_node()
since package id is physical concept, and one package id have multiple
memory numa id.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With function virtio_crypto_skcipher_crypt_req(), there is already
virtqueue_kick() call with spinlock held in function
__virtio_crypto_skcipher_do_req(). Remove duplicated virtqueue_kick()
function call here.
Fixes: d79b5d0bbf ("crypto: virtio - support crypto engine framework")
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
