The MDSS resets were left undescribed. Add them to allow resetting the
display subsystem, which is necessary to avoid issues caused by state
left over from the bootloader on various platforms.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303034847.13870-5-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MDSS resets were left undescribed. Add them to allow resetting the
display subsystem, which is necessary to avoid issues caused by state
left over from the bootloader on various platforms.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303034847.13870-4-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the TCSR clock controller that provides the refclks on Eliza
platform for PCIe, USB and UFS subsystems.
Co-developed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-6-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for Global clock controller for Eliza Qualcomm SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-5-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the RPMH clocks present in Eliza SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-4-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe pipe clocks are currently left as orphan clocks and remain
enabled indefinitely, which is suboptimal. Add the missing clock gates
so the PCIe driver can explicitly manage them when not in use. In order
not to break compatibility with old DTB, mark them as CLK_IGNORE_UNUSED.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1772799641-32164-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add driver for clock controller in Tenstorrent Atlantis SoC. This version
of the driver covers clocks from RCPU subsystem.
5 types of clocks generated by this controller: PLLs (PLLs
with bypass functionality and an additional Gate clk at output), Shared
Gates (Multiple Gate clks that share an enable bit), standard Muxes,
Dividers and Gates. All clocks are implemented using custom clk ops and
use the regmap interface associated with the syscon. All clocks are derived
from a 24 Mhz oscillator.
The reset controller is also setup as an auxiliary device of the clock
controller.
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
The HW user manual for the Renesas RZ/V2H(P) SoC specifies
that only the WDT1 IP is supposed to be used by Linux,
while the WDT{0,2,3} IPs are supposed to be used by the CM33
and CR8 cores.
Remove the clock and reset entries for WDT{0,2,3} to prevent
interfering with the CM33 and CR8 cores.
This change is harmless as only WDT1 is used by Linux, there
are no users for the WDT{0,2,3} cores.
Fixes: 3aeccbe081 ("clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260203124247.7320-4-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The clock tree for byte_clk_src is as follows:
┌──────byte0_clk_src─────┐
│ │
byte0_clk byte0_div_clk_src
│
byte0_intf_clk
If both of its direct children have CLK_SET_RATE_PARENT with different
requests, byte0_clk_src (and its parent) will be reconfigured. In this
case, byte0_intf should strictly follow the rate of byte0_clk (with
some adjustments based on PHY mode).
Remove CLK_SET_RATE_PARENT from byte0_div_clk_src to avoid this issue.
Fixes: e700bfd2f9 ("clk: qcom: Add support for Display clock Controllers on SA8775P")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260304-topic-dsi_byte_fixup-v1-5-b79b29f83176@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock tree for byte_clk_src is as follows:
┌──────byte0_clk_src─────┐
│ │
byte0_clk byte0_div_clk_src
│
byte0_intf_clk
If both of its direct children have CLK_SET_RATE_PARENT with different
requests, byte0_clk_src (and its parent) will be reconfigured. In this
case, byte0_intf should strictly follow the rate of byte0_clk (with
some adjustments based on PHY mode).
Remove CLK_SET_RATE_PARENT from byte0_div_clk_src to avoid this issue.
Fixes: 76f05f1ec7 ("clk: qcom: Add DISPCC driver support for SM4450")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260304-topic-dsi_byte_fixup-v1-4-b79b29f83176@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock tree for byte_clk_src is as follows:
┌──────byte0_clk_src─────┐
│ │
byte0_clk byte0_div_clk_src
│
byte0_intf_clk
If both of its direct children have CLK_SET_RATE_PARENT with different
requests, byte0_clk_src (and its parent) will be reconfigured. In this
case, byte0_intf should strictly follow the rate of byte0_clk (with
some adjustments based on PHY mode).
Remove CLK_SET_RATE_PARENT from byte0_div_clk_src to avoid this issue.
Fixes: f40b5217dc ("clk: qcom: Add Display Clock controller (DISPCC) driver for Milos")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260304-topic-dsi_byte_fixup-v1-3-b79b29f83176@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock tree for byte_clk_src is as follows:
┌──────byte0_clk_src─────┐
│ │
byte0_clk byte0_div_clk_src
│
byte0_intf_clk
If both of its direct children have CLK_SET_RATE_PARENT with different
requests, byte0_clk_src (and its parent) will be reconfigured. In this
case, byte0_intf should strictly follow the rate of byte0_clk (with
some adjustments based on PHY mode).
Remove CLK_SET_RATE_PARENT from byte0_div_clk_src to avoid this issue.
Fixes: 6c6750b706 ("clk: qcom: dispcc: Add support for display clock controller Kaanapali")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260304-topic-dsi_byte_fixup-v1-2-b79b29f83176@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock tree for byte_clk_src is as follows:
┌──────byte0_clk_src─────┐
│ │
byte0_clk byte0_div_clk_src
│
byte0_intf_clk
If both of its direct children have CLK_SET_RATE_PARENT with different
requests, byte0_clk_src (and its parent) will be reconfigured. In this
case, byte0_intf should strictly follow the rate of byte0_clk (with
some adjustments based on PHY mode).
Remove CLK_SET_RATE_PARENT from byte0_div_clk_src to avoid this issue.
Fixes: b4d15211c4 ("clk: qcom: dispcc-glymur: Add support for Display Clock Controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260304-topic-dsi_byte_fixup-v1-1-b79b29f83176@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The four byte_div_clk_src dividers (disp{0,1}_cc_mdss_byte{0,1}_div_clk_src)
had CLK_SET_RATE_PARENT set. When the DSI driver calls clk_set_rate() on
byte_intf_clk, the rate-change propagates through the divider up to the
parent PLL (byte_clk_src), halving the byte clock rate.
A simiar issue had been also encountered on SM8750.
b8501febdc ("clk: qcom: dispcc-sm8750: Drop incorrect CLK_SET_RATE_PARENT on byte intf parent").
Likewise, remove CLK_SET_RATE_PARENT from all four byte divider clocks
so that clk_set_rate() on the divider adjusts only the divider ratio,
leaving the parent PLL untouched.
Fixes: 4a66e76fdb ("clk: qcom: Add SC8280XP display clock controller")
Signed-off-by: White Lewis <liu224806@gmail.com>
[pengyu: reword]
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303115550.9279-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
UBSAN reported an out of bounds access during registration of the last
two outputs. This out of bounds access occurs because space is only
allocated in the hws array for two PLLs and the four output dividers
that each has, but the defined IDs contain two DLLS and their two
outputs each, which are not supported by the driver. The ID order is
PLLs -> DLLs -> PLL outputs -> DLL outputs. Decrement the PLL output IDs
by two while adding them to the array to avoid the problem.
Fixes: d39fb17276 ("clk: microchip: add PolarFire SoC fabric clock support")
CC: stable@vger.kernel.org
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add the clock and reset tree definitions for the RV1103B SoC.
Based on the 5.10 Rockchip vendor kernel driver.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Link: https://patch.msgid.link/20260210022620.172570-2-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Make code printing pointer error value a bit simpler and fix coccinelle
suggestion:
clk.c:363:16-23: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226205445.336839-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
samsung_a9fraco_recalc_rate(), unlike other functions in the unit, is
the first case dividing u64 by u64, thus it should rather use div64_u64
to avoid possible truncation. Note that the original code did not
use remainder.
This fixes Coccinelle warning:
clk-pll.c:1489:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602250053.wEU1hlpY-lkp@intel.com/
Fixes: f051dc5bc8 ("clk: samsung: Add clock PLL support for ARTPEC-9 SoC")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226205445.336839-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
All the functions operating on the 'handle' pointer are claiming it is a
pointer to const thus they should not modify the handle. In fact that's
a false statement, because first thing these functions do is drop the
cast to const with container_of:
struct acpm_info *acpm = handle_to_acpm_info(handle);
And with such cast the handle is easily writable with simple:
acpm->handle.ops.pmic_ops.read_reg = NULL;
The code is not correct logically, either, because functions like
acpm_get_by_node() and acpm_handle_put() are meant to modify the handle
reference counting, thus they must modify the handle. Modification here
happens anyway, even if the reference counting is stored in the
container which the handle is part of.
The code does not have actual visible bug, but incorrect 'const'
annotations could lead to incorrect compiler decisions.
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260224104203.42950-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add support for CMU_G3D which provides clocks to G3D block, and
register the required compatible and cmu_info for the same.
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Link: https://patch.msgid.link/20260202103555.2089376-3-raghav.s@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Most symbols for the clock descriptions (arrays) don't have a cmu_
prefix and all symbols have a _clks suffix where appropriate.
Update the few outliers to also fall into this same scheme for
consistency.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260205-clk-gs101-symbol-names-v1-1-a7d9a7a4d108@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
When the PRCM clk driver was added, somehow the r-spi module clock
was skipped over.
Add it so that r-spi can actually work.
Fixes: 8cea339cfb ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260217093004.3239051-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
imx_clk_scu_init() registers the imx_clk_scu_driver while commonly being
called from IMX driver's probe() callbacks.
However, it neither makes sense to register drivers from probe()
callbacks of other drivers, nor does the driver core allow registering
drivers with a device lock already being held.
The latter was revealed by commit dc23806a7c ("driver core: enforce
device_lock for driver_match_device()") leading to a deadlock condition
described in [1].
Besides that, nothing seems to unregister the imx_clk_scu_driver once
the corresponding driver module is unloaded, which leaves the
driver-core with a dangling pointer.
Also, if there are multiple matching devices for the imx8qxp_clk_driver,
imx8qxp_clk_probe() calls imx_clk_scu_init() multiple times. However,
any subsequent call after the first one will fail, since the driver-core
does not allow to register the same struct platform_driver multiple
times.
Hence, register the imx_clk_scu_driver from module_init() and unregister
it in module_exit().
Note that we first register the imx8qxp_clk_driver and then call
imx_clk_scu_module_init() to avoid having to call
imx_clk_scu_module_exit() in the unwind path of imx8qxp_clk_init().
Fixes: dc23806a7c ("driver core: enforce device_lock for driver_match_device()")
Fixes: 220175cd39 ("clk: imx: scu: fix build break when compiled as modules")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/lkml/13955113.uLZWGnKmhe@steina-w/
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8x/MBa8x
Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1]
Acked-by: Abel Vesa <abelvesa@kernel.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260212235842.85934-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add below clock PLL support for Axis ARTPEC-9 SoC platform:
- pll_a9fracm: Integer PLL with mid frequency FVCO (800 to 6400 MHz)
This is used in ARTPEC-9 SoC for shared PLL
- pll_a9fraco: Integer/Fractional PLL with mid frequency FVCO
(600 to 2400 MHz)
This is used in ARTPEC-9 SoC for Audio PLL
FOUT calculation for pll_a9fracm and pll_a9fraco:
FOUT = (MDIV x FIN)/(PDIV x (SDIV + 1)) for integer PLL
FOUT = (((MDIV + (KDIV/2^24)) x FIN)/(PDIV x (SDIV + 1)) for fractional PLL
Signed-off-by: GyoungBo Min <mingyoungbo@coasia.com>
Reviewed-by: Kyunghwan Kim <kenkim@coasia.com>
Signed-off-by: Ravi Patel <ravi.patel@samsung.com>
Link: https://patch.msgid.link/20251029130731.51305-3-ravi.patel@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The r9a09g056_mod_clks array is sorted by CPG_CLKON register number and
bit position. Move the RSPI 0/1/2 module clock entries to their correct
position to restore the array sort order.
Fixes: 1f76689d17 ("clk: renesas: r9a09g056: Add entries for RSCIs")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260125192706.27099-2-ovidiu.panait.rb@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The r9a09g057_mod_clks array is sorted by CPG_CLKON register number and
bit position. Move the RTC and RSPI module clock entries to their
correct position to restore the array sort order.
Fixes: 2efea3b35c ("clk: renesas: r9a09g057: Add entries for RSCIs")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260125190314.26729-1-ovidiu.panait.rb@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The clk_dp_ops are supposed to be used for DP-related clocks with a
proper MND divier. Use standard RCG2 ops for dptx1_aux_clk_src, the same
as all other DPTX AUX clocks in this driver.
Fixes: 16fb89f92e ("clk: qcom: Add support for Display Clock Controller on SM8450")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260112-dp-aux-clks-v1-2-456b0c11b069@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clk_dp_ops are supposed to be used for DP-related clocks with a
proper MND divier. Use shared RCG2 ops for dptx1_aux_clk_src, the same
as all other DPTX AUX clocks in this driver.
Fixes: b4d15211c4 ("clk: qcom: dispcc-glymur: Add support for Display Clock Controller")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260112-dp-aux-clks-v1-1-456b0c11b069@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the video clock controller for video clients to be able
to request for videocc clocks on Glymur platform.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260202-glymur_videocc-v2-4-8f7d8b4d8edd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The global clock controller video axi reset clocks are required by
the video SW driver to assert and deassert the clock resets during
their power down sequence. Hence add these clock resets.
Fixes: efe504300a ("clk: qcom: gcc: Add support for Global Clock Controller")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260202-glymur_videocc-v2-3-8f7d8b4d8edd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Support the graphics clock controller for Glymur for Graphics SW
driver to use the clocks. GXCLKCTL (Graphics GX Clock Controller) is a
block dedicated to managing clocks for the GPU subsystem on GX power
domain. The GX clock controller driver manages only the GX GDSC and the
rest of the resources of the controller are managed by the firmware.
Update the compatible for Graphics GX Clock Controller for Glymur as the
GX clock controller is a reuse of the Kaanapali driver.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-By: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260127-glymur_gpucc-v1-2-547334c81ba2@oss.qualcomm.com
[bjorn: Fixed copyright and de-acronymized MODULE_DESCRIPTION]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Glymur is a codename of Qualcomm SoC, not an acronym.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260217130047.281813-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are no remaining users of divider_round_rate() and
divider_round_rate_parent(), so let's go ahead and remove them.
Signed-off-by: Brian Masney <bmasney@redhat.com>
The round_rate() clk ops is deprecated, and all in tree drivers have
been converted, so let's go ahead and remove any references to the
round_rate() clk ops.
Signed-off-by: Brian Masney <bmasney@redhat.com>
The round_rate() clk ops is deprecated and going away, so migrate
this driver from round_rate() to determine_rate().
Signed-off-by: Brian Masney <bmasney@redhat.com>
The round_rate() clk ops is going away, so let's go ahead and remove any
references to it in the comments.
Signed-off-by: Brian Masney <bmasney@redhat.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZT9I
-----END PGP SIGNATURE-----
Merge tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (28 commits)
Revert "clk: microchip: core: allow driver to be compiled with COMPILE_TEST"
Revert "clk: microchip: fix typo in reference to a config option"
MIPS: Implement ARCH_HAS_CC_CAN_LINK
MIPS: rb532: Fix MMIO UART resource registration
MIPS: Work around LLVM bug when gp is used as global register variable
MIPS: Loongson64: env: Fixup serial clock-frequency when using LEFI
MIPS: Loongson2ef: Use pcibios_align_resource() to block io range
MIPS: Loongson2ef: Register PCI controller in early stage
clk: microchip: fix typo in reference to a config option
MIPS: Loongson64: dts: fix phy-related definition of LS7A GMAC
clk: microchip: core: allow driver to be compiled with COMPILE_TEST
MIPS: drop unused pic32.h header
watchdog: pic32-wdt: update include to use pic32.h from platform_data
watchdog: pic32-dmt: update include to use pic32.h from platform_data
serial: pic32_uart: update include to use pic32.h from platform_data
rtc: pic32: update include to use pic32.h from platform_data
pinctrl: pic32: update include to use pic32.h from platform_data
mmc: sdhci-pic32: update include to use pic32.h from platform_data
irqchip/irq-pic32-evic: update include to use pic32.h from platform_data
clk: microchip: core: update include to use pic32.h from platform_data
...
moved the context saving APIs around to fix a build error in certain
configurations. There was a change to the core framework for
CLK_OPS_PARENT_ENABLE behavior during registration, but it wrecked existing
drivers that didn't expect things to be turned off during clk registration so
it got reverted.
This cycle is really a large collection of new clk drivers, primarily for
Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed. Another big
change in here is support for automatic hardware clock gating on Samsung SoCs
where the clks turn on and off when needed. Ideally more vendors move to this
method for better power savings. The highlights are in the updates section
below.
Beyond all the new drivers we have a bunch of cleanups like converting drivers
from divider_round_rate() to divider_determine_rate() and using scoped for each
OF child loops. Otherwise it's the usual data fixes and plugging reference
leaks, etc. that's all pretty ordinary but not critical enough to fix until the
next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and video clk
controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on Renesas
RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and resets
on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520
-----BEGIN PGP SIGNATURE-----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=Zx/F
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
* clk-imx:
clk: imx: fracn-gppll: Add 241.90 MHz Support
clk: imx: fracn-gppll: Add 332.60 MHz Support
* clk-divider:
rtc: ac100: convert from divider_round_rate() to divider_determine_rate()
clk: zynqmp: divider: convert from divider_round_rate() to divider_determine_rate()
clk: x86: cgu: convert from divider_round_rate() to divider_determine_rate()
clk: versaclock3: convert from divider_round_rate() to divider_determine_rate()
clk: stm32: stm32-core: convert from divider_round_rate_parent() to divider_determine_rate()
clk: stm32: stm32-core: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: sprd: div: convert from divider_round_rate() to divider_determine_rate()
clk: sophgo: sg2042-clkgen: convert from divider_round_rate() to divider_determine_rate()
clk: nxp: lpc32xx: convert from divider_round_rate() to divider_determine_rate()
clk: nuvoton: ma35d1-divider: convert from divider_round_rate() to divider_determine_rate()
clk: milbeaut: convert from divider_round_rate() to divider_determine_rate()
clk: milbeaut: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: loongson1: convert from divider_round_rate() to divider_determine_rate()
clk: hisilicon: clkdivider-hi6220: convert from divider_round_rate() to divider_determine_rate()
clk: bm1880: convert from divider_round_rate() to divider_determine_rate()
clk: bm1880: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: actions: owl-divider: convert from divider_round_rate() to divider_determine_rate()
clk: actions: owl-composite: convert from owl_divider_helper_round_rate() to divider_determine_rate()
clk: sunxi-ng: convert from divider_round_rate_parent() to divider_determine_rate()
clk: sophgo: cv18xx-ip: convert from divider_round_rate() to divider_determine_rate()
* clk-rockchip:
clk: rockchip: Fix error pointer check after rockchip_clk_register_gate_link()
* clk-microchip:
dt-bindings: clock: mpfs-clkcfg: Add pic64gx compatibility
dt-bindings: clock: mpfs-ccc: Add pic64gx compatibility
clk: microchip: drop POLARFIRE from ARCH_MICROCHIP_POLARFIRE
clk: microchip: core: remove unused include asm/traps.h
clk: microchip: core: correct return value on *_get_parent()
clk: microchip: core: remove duplicate determine_rate on pic32_sclk_ops
Core & protocols
----------------
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls for
small helper and stack canary overhead in the fast-path. This
generates better and faster code with very small or no text size
increases, as in many cases the call generated more code than the
actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage by
up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the RX
path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without the
HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified, aligning
IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the rate
shaper of sch_cake across multiple CPUs, while still enforcing a
single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations that
are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information, saving
cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most protocols,
avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies between
the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes back
online.
Driver API
----------
- Support for switching the working mode (automatic vs manual) of a DPLL
device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties, to
generalize polarity inversion requirements for differential signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers
--------------
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram and
NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the used
H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO, leading to
12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN metadata
access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support
multi-wiphy devices and and pave the way for future device support
in the same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O31Y
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system controllers,
Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI WT61P803 PUZZLE, Delta
Electronics DPS-800-AB power supply, Infineon IR35221 Digital
Multi-phase Controller, Infineon PXE1610 Digital Dual Output 6+1
VR12.5 & VR13 CPU Controller, socionext,uniphier-smpctrl, and
xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files. These
are mostly for arm64 platforms which is getting closer to be warning
free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers
-----BEGIN PGP SIGNATURE-----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=RE7t
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a single
real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use devres
consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio driver
along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x and
add more models to the list of supported variants
-----BEGIN PGP SIGNATURE-----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=Zhuy
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
Commit 026d70dcfe ("clk: microchip: core: allow driver to be compiled
with COMPILE_TEST") introduces a typo when referring to a config option in
an ifdef directive.
Fix this typo.
Fixes: 026d70dcfe ("clk: microchip: core: allow driver to be compiled with COMPILE_TEST")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add AST2700 clock controller driver and also use axiliary
device framework register the reset controller driver.
Due to clock and reset using the same register region.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Prepare for long-term maintenance and future additions by introducing a
dedicated drivers/clk/aspeed/ subdirectory for ASPEED clock drivers.
Move the existing ASPEED clock drivers into the new
drivers/clk/aspeed/ subdirectory.
No functional change, file move only.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This reverts commit 669917676e.
It's been shown to cause problems on i.MX and STM32 platforms
where the board doesn't boot. In one case, a clk with
CLK_IS_CRITICAL and CLK_OPS_PARENT_ENABLE is being registered
causing the parent to be enabled, the rate recalculated, and then
the parent is disabled causing the critical clk being registered
to stop clocking.
A fix for that would be to calculate the rate of the clk after
enabling the critical clk itself, but that wouldn't fix another
problem where a clk with CLK_OPS_PARENT_ENABLE is registered
before the parent is registered. In this case the hardware access
in the clk_ops::recalc_rate() function would fail if the parent
is disabled.
There are even more problems exposed by this patch because it
introduces logic that disables clks earlier in system boot than
has existed previously. Historically we've not disabled clks
until late init (clk_disable_unused) under the assumption that
clks have been registered enough to have a consistent view of the
clk tree. The clk_disable_unused logic doesn't work very well
though, leading to quite a few devices booting with
clk_ignore_unused on the kernel command line.
Long story short, disabling clks during clk registration is full
of pitfalls. Revert this commit until a proper solution can be
found.
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/r/6239343.lOV4Wx5bFT@steina-w
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/036da7ce-6487-4a6e-9b15-97c6d3bcdcec@sirena.org.uk
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: Brian Masney <bmasney@redhat.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Abel Vesa <abelvesa@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-of-for-each-compatible-scoped-v3-9-c22fa2c0749a@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Abel Vesa <abelvesa@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-of-for-each-compatible-scoped-v3-8-c22fa2c0749a@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the Renesas 9-series PCIe clock generator driver from
SIMPLE_DEV_PM_OPS() to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr().
This lets us drop the __maybe_unused annotations from its suspend and
resume callbacks, and reduces kernel size in case CONFIG_PM or
CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The 9FGV0841 has 8 outputs and registers 8 struct clk_hw, make sure
there are 8 slots for those newly registered clk_hw pointers, else
there is going to be out of bounds write when pointers 4..7 are set
into struct rs9_driver_data .clk_dif[4..7] field.
Since there are other structure members past this struct clk_hw
pointer array, writing to .clk_dif[4..7] fields corrupts both
the struct rs9_driver_data content and data around it, sometimes
without crashing the kernel. However, the kernel does surely
crash when the driver is unbound or during suspend.
Fix this, increase the struct clk_hw pointer array size to the
maximum output count of 9FGV0841, which is the biggest chip that
is supported by this driver.
Cc: stable@vger.kernel.org
Fixes: f0e5e18002 ("clk: rs9: Add support for 9FGV0841")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/CAMuHMdVyQpOBT+Ho+mXY07fndFN9bKJdaaWGn91WOFnnYErLyg@mail.gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This driver currently only supports builds against a PIC32 target. To
avoid future breakage in the future, let's update the Kconfig and the
driver so that it can be built with CONFIG_COMPILE_TEST enabled.
Note that with the existing asm calls is not how I'd want to do this
today if this was a new driver, however I don't have access to this
hardware. To avoid any breakage, let's keep the existing behavior.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Acked-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260128154306.133047-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After renaming round_rate->determine, kerneldoc does not match anymore,
causing W=1 warnings:
pll.c:102 function parameter 'req' not described in 'zynqmp_pll_determine_rate'
pll.c:102 expecting prototype for zynqmp_pll_round_rate(). Prototype was for zynqmp_pll_determine_rate() instead
Fixes: 193650c7a8 ("clk: zynqmp: pll: convert from round_rate() to determine_rate()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
After renaming round_rate->determine, kerneldoc does not match anymore,
causing W=1 warnings:
Warning: drivers/clk/zynqmp/divider.c:122 function parameter 'req' not described in 'zynqmp_clk_divider_determine_rate'
Warning: drivers/clk/zynqmp/divider.c:122 expecting prototype for zynqmp_clk_divider_round_rate(). Prototype was for zynqmp_clk_divider_determine_rate() instead
Fixes: 0f9cf96a01 ("clk: zynqmp: divider: convert from round_rate() to determine_rate()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
devm_pm_runtime_enable() can fail due to memory allocation. The current
code ignores its return value, and when pm_runtime_resume_and_get() fails,
it returns directly without unmapping the shared_io region.
Add error handling for devm_pm_runtime_enable(). Reorder cleanup labels
to properly unmap shared_io on pm_runtime_resume_and_get() failure.
Fixes: 2f7b1d8b55 ("clk: mediatek: Do a runtime PM get on controllers during probe")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This option defaults to y for ARCH64 meaning it's built even if we don't
want anything related to mediatek. Make the default condition stricter
and only build it if ARCH_MEDIATEK is selected.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
All the MFGPLL require MFG_EB to be on for any operation on them, and
they only tick when MFG_EB is on as well, therefore making this a
parent-child relationship.
This dependency wasn't clear during the initial upstreaming of these
clock controllers, as it only made itself known when I could observe
the effects of the clock by bringing up a different piece of hardware.
Add a new PLL_PARENT_EN flag to mediatek's clk-pll.h, and check for it
when initialising the pll to then translate it into the actual
CLK_OPS_PARENT_ENABLE flag.
Then add the mfg_eb parent to the mfgpll clocks, and set the new
PLL_PARENT_EN flag.
Fixes: 03dc02f8c7 ("clk: mediatek: Add MT8196 mfg clock support")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
After refactoring all of PLL to pass the device, it's now fairly easy to
refactor pllfh and its users, as pllfh registration wraps PLL
registration.
Do this refactor and move all of the pllfh users to pass the device as
well.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Passing the struct device pointer to clk_hw_register allows for runtime
power management to work for the registered clock controllers. However,
the mediatek PLL clocks do not do this.
Change this by adding a struct device pointer argument to
mtk_clk_register_pll, and fix up the only other user of it. Also add a
new member to the struct mtk_clk_pll for the struct device pointer,
which is set by mtk_clk_register_pll and is used by
mtk_clk_register_pll_ops.
If mtk_clk_register_pll is called with a NULL struct device pointer,
then everything still works as expected; the clock core will simply
treat them as previously, i.e. without runtime power management.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As it stands, mtk_clk_register_plls takes a struct device_node pointer
as its first argument. This is a tragic happenstance, as it's trivial to
get the device_node from a struct device, but the opposite not so much.
The struct device is a much more useful thing to have passed down.
Refactor mtk_clk_register_plls to take a struct device pointer instead
of a struct device_node pointer, and fix up all users of this function.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When CLK_OPS_PARENT_ENABLE was introduced, it guarded various clock
operations, such as setting the rate or switching parents. However,
another operation that can and often does touch actual hardware state is
recalc_rate, which may also be affected by such a dependency.
Add parent enables/disables where the recalc_rate op is called directly.
Fixes: fc8726a2c0 ("clk: core: support clocks which requires parents enable (part 2)")
Fixes: a4b3518d14 ("clk: core: support clocks which requires parents enable (part 1)")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Since commit 8ceff24a75 ("clk: mediatek: clk-gate: Refactor
mtk_clk_register_gate to use mtk_gate struct") the mtk_gate structs
are no longer just used for initialization/registration, but also at
runtime. So drop __initconst annotations.
Fixes: 8ceff24a75 ("clk: mediatek: clk-gate: Refactor mtk_clk_register_gate to use mtk_gate struct")
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Make sure to drop the reference taken when looking up the EMC device and
its driver data on first set_rate().
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 2db04f16b5 ("clk: tegra: Add EMC clock driver")
Fixes: 6d6ef58c24 ("clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver")
Cc: stable@vger.kernel.org # 4.2: 6d6ef58c24
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 0f9cf96a01 ("clk: zynqmp: divider: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: f7a6bed91a ("clk: x86: cgu: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 9e3372b2eb ("clk: versaclock3: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate_parent() function is now deprecated, so let's
migrate to divider_determine_rate() instead so that this deprecated API
can be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cd1cb38836 ("clk: stm32: stm32-core: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cd1cb38836 ("clk: stm32: stm32-core: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: deb4740a5f ("clk: sprd: div: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Note that this commit also removes a debugging message that's not really
needed.
Fixes: 9a3b699361 ("clk: sophgo: sg2042-clkgen: convert from round_rate() to determine_rate()")
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 0879768df2 ("clk: nxp: lpc32xx: convert from round_rate() to determine_rate()")
Tested-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 215f8aa095 ("clk: nuvoton: ma35d1-divider: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 7b45988fcf ("clk: milbeaut: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: fe67c682f91c ("clk: milbeaut: convert from divider_round_rate() to divider_determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: bb40a2ef4f ("clk: loongson1: convert from round_rate() to determine_rate()")
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B & LS1C
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 619a6210f3 ("clk: hisilicon: clkdivider-hi6220: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 64613d7fb4 ("clk: bm1880: convert from round_rate() to determine_rate()")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cf1d95fa0c64 ("clk: bm1880: convert from divider_round_rate() to divider_determine_rate()")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed. Additionally, owl_divider_helper_round_rate() is no longer used,
so let's drop that from the header file as well.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 1b04e12a8b ("clk: actions: owl-divider: convert from round_rate() to determine_rate()")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
owl_divider_helper_round_rate() is just a wrapper for
divider_round_rate(), which is deprecated. Let's migrate to
divider_determine_rate() instead so that this deprecated API can be
removed.
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate_parent() function is now deprecated, so let's
migrate to divider_determine_rate() instead so that this deprecated API
can be removed. Also go ahead and convert all of the driver from round
rate type to determine rate that accepts a 'struct clk_rate_request' to
simplify the overall driver code.
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed. Also go ahead and convert all of the driver from round rate
type to determine rate that accepts a 'struct clk_rate_request' to
simplify the overall driver code.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Add a new managed clock framework helper function that combines getting
optional bulk clocks and enabling them in a single operation.
The devm_clk_bulk_get_optional_enable() function simplifies the common
pattern where drivers need to get optional bulk clocks, prepare and enable
them, and have them automatically disabled/unprepared and freed when the
device is unbound.
This new API follows the established pattern of
devm_clk_bulk_get_all_enabled() and reduces boilerplate code in drivers
that manage multiple optional clocks.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260116192725.972966-2-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set CLK_OPS_PARENT_ENABLE to ensure the parent gets prepared and enabled
when switching to it.
Fixes: e3c13e0caa ("clk: qcom: dispcc-sm7150: Fix dispcc_mdss_pclk0_clk_src")
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260117-sm7150-dispcc-fix-v1-1-2f39966bcad2@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some parallel panels have a pixelclk of 24.19 MHz. Add support for
241.90 MHz so a by 10 divider can be used to derive the exact pixelclk.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260113-v6-18-topic-clk-fracn-gppll-v3-2-45da70f43c98@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Some parallel panels have a pixelclk of 33.260 MHz. Add support for
332.60 MHz so a by 10 divider can be used to derive the exact pixelclk.
Reviewed-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260113-v6-18-topic-clk-fracn-gppll-v3-1-45da70f43c98@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
cmu_dpu is the clock management unit used for the Display Process Unit
block. It generates clocks for image scaler, compressor etc.
Add support for the muxes, dividers and gates in cmu_dpu.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260113-dpu-clocks-v3-4-cb85424f2c72@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Currently, sysreg registers of a CMU that has PM and automatic clock
gating enabled are not saved / restored during runtime PM (RPM) or
s2idle. During normal suspend, they are accessed too late, after the
CMU (and potentially power domain) have been shut down, causing an
SError.
The reason is that these registers are registered to be saved/restored
via a syscore suspend handler which doesn't run during RPM or s2idle.
During normal suspend, this handler runs after the CMU has been shut
down. This registration happens as part of
samsung_clk_extended_sleep_init() via samsung_en_dyn_root_clk_gating().
When PM is enabled for a CMU, registers must be saved/restored via
exynos_arm64_cmu_suspend() / exynos_arm64_cmu_resume() respectively
instead. These use their own data structures and are unrelated to
anything that samsung_clk_extended_sleep_init() does. Calling it
unconditionally from samsung_en_dyn_root_clk_gating() therefore isn't
useful.
Update the code to prepare sysreg save / restore in a similar way to
how it handles other clock registers in the PM case already.
exynos_arm64_cmu_suspend() / exynos_arm64_cmu_resume() already handle
sysreg save/restore, just the setup was incorrect.
Fixes: 298fac4f4b ("clk: samsung: Implement automatic clock gating mode for CMUs")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260109-clk-samsung-autoclk-updates-v1-2-2394dcf242a9@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
We currently print a warning message that the IO memory size is not
compatible with automatic clock gating for many Exynos-based boards,
including legacy ones, even if not requested to enable automatic clock
gating in the first place.
Change the test in question to avoid that warning.
Fixes: 298fac4f4b ("clk: samsung: Implement automatic clock gating mode for CMUs")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/8b2c412d-3e1e-4be0-a9d5-ef67f6f0d409@samsung.com/
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260109-clk-samsung-autoclk-updates-v1-1-2394dcf242a9@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tegra30 has CSI pad bits in both PLLD and PLLD2 clocks that are required
for the correct work of the CSI block. Add CSI pad A and pad B clock gates
with PLLD/PLLD2 parents, respectively. Add a plld2 spinlock, like one plld
uses, to prevent simultaneous access since both the PLLDx and CSIx_PAD
clocks use the same registers
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CSUS clock is a clock gate for the output clock signal primarily
sourced from the VI_SENSOR clock. This clock signal is used as an input
MCLK clock for cameras.
Unlike later Tegra SoCs, the Tegra 20 can change its CSUS parent, which is
why csus_mux is added in a similar way to how CDEV1 and CDEV2 are handled.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
System suspend and resume callbacks run after the core has bumped
up the runtime PM usage counters of all devices, so these callbacks
need not worry about runtime PM reference counting.
Accordingly, to eliminate useless overhead related to runtime PM
usage counter manipulation, set the suspend callback pointer in
tegra_clock_pm to a wrapper around pm_runtime_resume() called
tegra_clock_suspend() and do not set the resume callback in it at all.
This will also facilitate a planned change of the pm_runtime_put()
return type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: b6f90511c1 ("clk: qcom: regmap-divider: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260108-clk-divider-round-rate-v1-16-535a3ed73bf3@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: b6f90511c1 ("clk: qcom: regmap-divider: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260108-clk-divider-round-rate-v1-15-535a3ed73bf3@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Convert the limited MIPI clock calculations to a full range of settings
based on math including H/W limitation validation.
Since the required DSI division setting must be specified from external
sources before calculations, expose a new API to set it.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251124131003.992554-2-chris.brandt@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This driver is used by non-polarfire devices now, and the ARCH_MICROCHIP
symbol has been defined for some time on RISCV so drop it without any
functional change.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260113-doing-surplus-dc45866f71d4@spud
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,nco" anymore [1]. Use
"apple,t8103-nco" as base compatible as it is the SoC the driver and
bindings were written for.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Fixes: 6641057d5d ("clk: clk-apple-nco: Add driver for Apple NCO")
Cc: stable@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On TH1520 SoC, c910_clk feeds the CPU cluster. It could be glitchlessly
reparented to one of the two PLLs: either to cpu_pll0 indirectly through
c910_i0_clk, or to cpu_pll1 directly.
To achieve glitchless rate change, customized clock operations are
implemented for c910_clk: on rate change, the PLL not currently in use
is configured to the requested rate first, then c910_clk reparents to
it.
Additionally, c910_bus_clk, which in turn takes c910_clk as parent,
has a frequency limit of 750MHz. A clock notifier is registered on
c910_clk to adjust c910_bus_clk on c910_clk rate change.
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
roclk_get_parent() and sclk_get_parent() has the possibility of
returning -EINVAL, however the framework expects this call to always
succeed since the return value is unsigned.
If there is no parent map defined, then the current value programmed in
the hardware is used. Let's use that same value in the case where
-EINVAL is currently returned.
This index is only used by clk_core_get_parent_by_index(), and it
validates that it doesn't overflow the number of available parents.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202512050233.R9hAWsJN-lkp@intel.com/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20251205-clk-microchip-fixes-v3-2-a02190705e47@redhat.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
pic32_sclk_ops previously had a sclk_round_rate() member, and this was
recently converted over to sclk_determine_rate() with the help of a
Coccinelle semantic patch. pic32_sclk_ops now has two conflicting
determine_rate ops members.
Prior to the conversion, pic32_sclk_ops already had a determine_rate
member that points to __clk_mux_determine_rate(). When both the
round_rate() and determine_rate() ops are defined, the clk core only
uses the determine_rate() op. Let's go ahead and drop the recently
converted sclk_determine_rate() to match the previous functionality
prior to the conversion.
Fixes: e9f039c08c ("clk: microchip: core: convert from round_rate() to determine_rate()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511222115.uvHrP95A-lkp@intel.com/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20251205-clk-microchip-fixes-v3-1-a02190705e47@redhat.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 0e56e3369b ("clk: qcom: alpha-pll: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260108-clk-divider-round-rate-v1-14-535a3ed73bf3@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If the assert() fails due to timeout error, set the reset register bit
back to deasserted state. This change is needed especially for handling
assert error in suspend() callback that expect the device to be in
operational state in case of failure.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260108123433.104464-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
If the assert() fails due to timeout error, set the reset register bit
back to deasserted state. This change is needed especially for handling
assert error in suspend() callback that expect the device to be in
operational state in case of failure.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260108123433.104464-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Introduce a new clock PLLA for SpacemiT's K3 SoC which has a different
register layout comparing to previous PPL type. And, It is configured
by swcr1, swcr3 and swcr2 BIT[15:8].
Link: https://lore.kernel.org/r/20260108-k3-clk-v5-3-42a11b74ad58@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
K3 SoC has the clock IP which support to write value 0 for enabling the
clock, while write 1 for disabling it, thus the enable BIT is inverted.
So, introduce a flag to support the inverted gate clock.
Link: https://lore.kernel.org/r/20260108-k3-clk-v5-2-42a11b74ad58@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
This change is needed for adding future new SpacemiT K3 reset driver.
Since both K1 and K3 reset code register via the same module which its
name changed to spacemit_ccu, it's necessary to encode the platform/SoC
in the reset auxiliary device name to distinguish them, otherwise two
reset drivers will claim to support same "compatible" auxiliary device
even in the case of only one CCU clock driver got registered, which in
the end lead to a broken reset driver.
This change will introduce a runtime break to reset driver, and will be
fixed in follow-up commit:
ecff77f7c0 ("reset: spacemit: fix auxiliary device id")
Link: https://lore.kernel.org/r/20260108-06-k1-clk-common-v4-3-badf635993d3@gentoo.org
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Refactor the probe function of SpacemiT's clock, and extract a common ccu
file, so new clock driver added in the future can share the same code,
which would lower the burden of maintenance. Since this commit changes the
module name from spacemit_ccu_k1 to spacemit_ccu where the auxiliary device
registered, the auxiliary device id need to be adjusted. Idea of the patch
comes from the review of K3 clock driver, please refer to this disucssion[1]
for more detail.
This change will introduce a runtime break to reset driver, and will be
fixed in follow-up commit:
ecff77f7c0 ("reset: spacemit: fix auxiliary device id")
Link: https://lore.kernel.org/all/aTo8sCPpVM1o9PKX@pie/ [1]
Link: https://lore.kernel.org/r/20260108-06-k1-clk-common-v4-2-badf635993d3@gentoo.org
Suggested-by: Yao Zi <me@ziyao.cc>
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Private state is available in all places where cpg_rzt2h_mstp_read() is
called, remove the extra pointer math used to find it from clk_hw.
While at it, put these statements on a single line as they do not exceed
the 80 columns limit.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251127145654.3253992-2-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Support the graphics clock controller for Kaanapali for Graphics SW
driver to use the clocks. GXCLKCTL (Graphics GX Clock Controller) is a
block dedicated to managing clocks for the GPU subsystem on GX power
domain. The GX clock controller driver manages only the GX GDSC and the
rest of the resources of the controller are managed by the firmware.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-11-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the Camera Clock Controller (CAMCC) on the Kaanapali
platform.
The CAMCC block on Kaanapali includes both the primary camera clock
controller and the Camera BIST clock controller, which provides the
functional MCLK required for camera operations.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-9-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Support the clock controller driver for Kaanapali to enable display SW to
be able to control the clocks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-8-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Recent QCOM PLLs require the CAL_L field to be programmed according to
specific hardware recommendations, rather than using the legacy default
value of 0x44. Hardcoding this value can lead to suboptimal or incorrect
behavior on newer platforms.
To address this, introduce a `cal_l` field in the PLL configuration
structure, allowing CAL_L to be set explicitly based on platform
requirements. This improves flexibility and ensures correct PLL
initialization across different hardware variants.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-1-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the Camera Clock Controller (CAMCC) on the SM8750
platform.
The CAMCC block on SM8750 includes both the primary camera clock
controller and the Camera BIST clock controller, which provides the
functional MCLK required for camera operations.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251202-sm8750_camcc-v1-3-b3f7ef6723f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add clock ops for Rivian ELU and EKO_T PLLs, add the register offsets
for the Rivian ELU PLL. Since ELU and EKO_T shared the same offsets and
PLL ops, reuse the Rivian EKO_T enum.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-3-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
