The tpm_tis_write8() call specifies arguments in wrong order. Should be
(data, addr, value) not (data, value, addr). The initial correct order
was changed during the major refactoring when the code was split.
Fixes: 41a5e1cf1f ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Now that there are easy-to-use HMAC-SHA256 library functions, use these
in tpm2-sessions.c instead of open-coding the HMAC algorithm.
Note that the new implementation correctly handles keys longer than 64
bytes (SHA256_BLOCK_SIZE), whereas the old implementation handled such
keys incorrectly. But it doesn't appear that such keys were being used.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In tpm_buf_check_hmac_response(), compare the HMAC values in constant
time using crypto_memneq() instead of in variable time using memcmp().
This is worthwhile to follow best practices and to be consistent with
MAC comparisons elsewhere in the kernel. However, in this driver the
side channel seems to have been benign: the HMAC input data is
guaranteed to always be unique, which makes the usual MAC forgery via
timing side channel not possible. Specifically, the HMAC input data in
tpm_buf_check_hmac_response() includes the "our_nonce" field, which was
generated by the kernel earlier, remains under the control of the
kernel, and is unique for each call to tpm_buf_check_hmac_response().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
After reading all the feedback, right now disabling the TPM2_TCG_HMAC
is the right call.
Other views discussed:
A. Having a kernel command-line parameter or refining the feature
otherwise. This goes to the area of improvements. E.g., one
example is my own idea where the null key specific code would be
replaced with a persistent handle parameter (which can be
*unambigously* defined as part of attestation process when
done correctly).
B. Removing the code. I don't buy this because that is same as saying
that HMAC encryption cannot work at all (if really nitpicking) in
any form. Also I disagree on the view that the feature could not
be refined to something more reasoable.
Also, both A and B are worst options in terms of backporting.
Thuss, this is the best possible choice.
Cc: stable@vger.kernel.or # v6.10+
Fixes: d2add27cf2 ("tpm: Add NULL primary creation")
Suggested-by: Chris Fenner <cfenn@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Prior to commit b52da4054e ("ipmi: Rework user message limit handling"),
i_ipmi_request() used to increase the user reference counter if the receive
message is provided by the caller of IPMI API functions. This is no longer
the case. However, ipmi_free_recv_msg() is still called and decreases the
reference counter. This results in the reference counter reaching zero,
the user data pointer is released, and all kinds of interesting crashes are
seen.
Fix the problem by increasing user reference counter if the receive message
has been provided by the caller.
Fixes: b52da4054e ("ipmi: Rework user message limit handling")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20251006201857.3433837-1-linux@roeck-us.net>
Signed-off-by: Corey Minyard <corey@minyard.net>
Here is the big set of char/misc/iio and other driver subsystem changes
for 6.18-rc1. Loads of different stuff in here, it was a busy
development cycle in lots of different subsystems, with over 27k new
lines added to the tree. Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor
updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust. This is the big one, and
was driving a huge majority of the rust binding work over the past
years. Right now there are 2 binder drivers in the kernel, selected
only at build time as to which one to use as binder wants to be
included in the system at boot time. The binder C maintainers all
agreed on this, as eventually, they want the C code to be removed from
the tree, but it will take a few releases to get there while both
are maintained to ensure that the rust implementation is fully
stable and compliant with the existing userspace apis.
All of these have been in linux-next for a while, with only minor merge
issues showing up (you will hit them as well.) Just accept both sides
of the merge, it's just some header and include file lines, nothing
major.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEffA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynI/wCgjLFWH9B+huZI5JQb06NShggZod4AnjFFJ4ID
macHNv5/SjpAh7H5ssBU
=cjWS
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
Drivers:
- Add ciphertext hiding support to ccp.
- Add hashjoin, gather and UDMA data move features to hisilicon.
- Add lz4 and lz77_only to hisilicon.
- Add xilinx hwrng driver.
- Add ti driver with ecb/cbc aes support.
- Add ring buffer idle and command queue telemetry for GEN6 in qat.
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable.
- Fix CPU number wraparound in padata.
-----BEGIN PGP SIGNATURE-----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=knnk
-----END PGP SIGNATURE-----
Merge tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Drivers:
- Add ciphertext hiding support to ccp
- Add hashjoin, gather and UDMA data move features to hisilicon
- Add lz4 and lz77_only to hisilicon
- Add xilinx hwrng driver
- Add ti driver with ecb/cbc aes support
- Add ring buffer idle and command queue telemetry for GEN6 in qat
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable
- Fix CPU number wraparound in padata"
* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
dt-bindings: rng: hisi-rng: convert to DT schema
crypto: doc - Add explicit title heading to API docs
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
KEYS: X.509: Fix Basic Constraints CA flag parsing
crypto: anubis - simplify return statement in anubis_mod_init
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
crypto: hisilicon/qm - clear all VF configurations in the hardware
crypto: hisilicon - enable error reporting again
crypto: hisilicon/qm - mask axi error before memory init
crypto: hisilicon/qm - invalidate queues in use
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
crypto: aspeed - Fix dma_unmap_sg() direction
rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
crypto: comp - Use same definition of context alloc and free ops
crypto: omap - convert from tasklet to BH workqueue
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
crypto: caam - double the entropy delay interval for retry
padata: WQ_PERCPU added to alloc_workqueue users
padata: replace use of system_unbound_wq with system_dfl_wq
crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
...
- Add relocation handling for R_SPARC_UA64 for sparc64 that is generated
by llvm and clarify printout on missing relocation handler
- Fix missing hugetlb tte initialization for sun4u
- Code cleanup for redundant use of __GPF_NOWARN for sparc64
- Fix prototypes of reads[bwl]() for sparc64 by adding missing const and
volatile pointer qualifiers
- Fix bugs in accurate exception reporting in multiple machine specific
sparc64 variants of copy_{from,to}_user() for sparc64
- Fix memory leak in error handling for sparc32
- Drop -ansi from asflags and replace __ASSEMBLY__ with __ASSEMBLER__ in
headers for all arch/sparc
- Replace strcpy() with strscpy() for all arch/sparc
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQfqfbgobF48oKMeq81AykqDLayywUCaN/S5hQcYW5kcmVhc0Bn
YWlzbGVyLmNvbQAKCRA1AykqDLayy6RgAQCrgItTcNenWJ1gy7UlT285jYhA9PyE
QSSRUroiA6kXvgEAjEcvbFMJYKJYM7GsCi2akQRcMJqSTCG7P9u/WW2yXQQ=
=270Q
-----END PGP SIGNATURE-----
Merge tag 'sparc-for-6.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Add relocation handling for R_SPARC_UA64 for sparc64 that is
generated by llvm and clarify printout on missing relocation handler
- Fix missing hugetlb tte initialization for sun4u
- Code cleanup for redundant use of __GPF_NOWARN for sparc64
- Fix prototypes of reads[bwl]() for sparc64 by adding missing const
and volatile pointer qualifiers
- Fix bugs in accurate exception reporting in multiple machine specific
sparc64 variants of copy_{from,to}_user() for sparc64
- Fix memory leak in error handling for sparc32
- Drop -ansi from asflags and replace __ASSEMBLY__ with __ASSEMBLER__
in headers for all arch/sparc
- Replace strcpy() with strscpy() for all arch/sparc
* tag 'sparc-for-6.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc: (22 commits)
sparc: Replace deprecated strcpy() with strscpy() in handle_nextprop_quirks()
sparc64: Replace deprecated strcpy() with strscpy() in build_path_component()
sparc: Replace deprecated strcpy() with strscpy() in prom_32.c
sparc: Replace deprecated strcpy() with strscpy() in domain services driver
sparc64: Replace deprecated strcpy() with strscpy() in prom_nextprop()
sparc: floppy: Replace deprecated strcpy() with strscpy() in sun_floppy_init()
sparc: parport: Replace deprecated strcpy() with strscpy() in ecpp_probe()
sparc: PCI: Replace deprecated strcpy() with strscpy()
sparc: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
sparc: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
sparc: Drop the "-ansi" from the asflags
sparc: fix error handling in scan_one_device()
sparc: fix accurate exception reporting in copy_{from,to}_user for M7
sparc: fix accurate exception reporting in copy_to_user for Niagara 4
sparc: fix accurate exception reporting in copy_{from_to}_user for Niagara
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC III
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC
sparc64: fix prototypes of reads[bwl]()
sparc64: Remove redundant __GFP_NOWARN
sparc64: fix hugetlb for sun4u
...
- The 3 patch series "mm, swap: improve cluster scan strategy" from
Kairui Song improves performance and reduces the failure rate of swap
cluster allocation.
- The 4 patch series "support large align and nid in Rust allocators"
from Vitaly Wool permits Rust allocators to set NUMA node and large
alignment when perforning slub and vmalloc reallocs.
- The 2 patch series "mm/damon/vaddr: support stat-purpose DAMOS" from
Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets
for virtual address spaces for ops-level DAMOS filters.
- The 3 patch series "execute PROCMAP_QUERY ioctl under per-vma lock"
from Suren Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps.
- The 2 patch series "mm/mincore: minor clean up for swap cache
checking" from Kairui Song performs some cleanup in the swap code.
- The 11 patch series "mm: vm_normal_page*() improvements" from David
Hildenbrand provides code cleanup in the pagemap code.
- The 5 patch series "add persistent huge zero folio support" from
Pankaj Raghav provides a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero.
- The 3 patch series "kho: fixes and cleanups" from Mike Rapoport adds a
few touchups to the recently added Kexec Handover feature.
- The 10 patch series "mm: make mm->flags a bitmap and 64-bit on all
arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To
end the constant struggle with space shortage on 32-bit conflicting with
64-bit's needs.
- The 2 patch series "mm/swapfile.c and swap.h cleanup" from Chris Li
cleans up some swap code.
- The 7 patch series "selftests/mm: Fix false positives and skip
unsupported tests" from Donet Tom fixes a few things in our selftests
code.
- The 7 patch series "prctl: extend PR_SET_THP_DISABLE to only provide
THPs when advised" from David Hildenbrand "allows individual processes
to opt-out of THP=always into THP=madvise, without affecting other
workloads on the system".
It's a long story - the [1/N] changelog spells out the considerations.
- The 11 patch series "Add and use memdesc_flags_t" from Matthew Wilcox
gets us started on the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc.
- The 3 patch series "Tiny optimization for large read operations" from
Chi Zhiling improves the efficiency of the pagecache read path.
- The 5 patch series "Better split_huge_page_test result check" from Zi
Yan improves our folio splitting selftest code.
- The 2 patch series "test that rmap behaves as expected" from Wei Yang
adds some rmap selftests.
- The 3 patch series "remove write_cache_pages()" from Christoph Hellwig
removes that function and converts its two remaining callers.
- The 2 patch series "selftests/mm: uffd-stress fixes" from Dev Jain
fixes some UFFD selftests issues.
- The 3 patch series "introduce kernel file mapped folios" from Boris
Burkov introduces the concept of "kernel file pages". Using these
permits btrfs to account its metadata pages to the root cgroup, rather
than to the cgroups of random inappropriate tasks.
- The 2 patch series "mm/pageblock: improve readability of some
pageblock handling" from Wei Yang provides some readability improvements
to the page allocator code.
- The 11 patch series "mm/damon: support ARM32 with LPAE" from SeongJae
Park teaches DAMON to understand arm32 highmem.
- The 4 patch series "tools: testing: Use existing atomic.h for
vma/maple tests" from Brendan Jackman performs some code cleanups and
deduplication under tools/testing/.
- The 2 patch series "maple_tree: Fix testing for 32bit compiles" from
Liam Howlett fixes a couple of 32-bit issues in
tools/testing/radix-tree.c.
- The 2 patch series "kasan: unify kasan_enabled() and remove
arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN
arch-specific initialization code into a common arch-neutral
implementation.
- The 3 patch series "mm: remove zpool" from Johannes Weiner removes
zspool - an indirection layer which now only redirects to a single thing
(zsmalloc).
- The 2 patch series "mm: task_stack: Stack handling cleanups" from
Pasha Tatashin makes a couple of cleanups in the fork code.
- The 37 patch series "mm: remove nth_page()" from David Hildenbrand
makes rather a lot of adjustments at various nth_page() callsites,
eventually permitting the removal of that undesirable helper function.
- The 2 patch series "introduce kasan.write_only option in hw-tags" from
Yeoreum Yun creates a KASAN read-only mode for ARM, using that
architecture's memory tagging feature. It is felt that a read-only mode
KASAN is suitable for use in production systems rather than debug-only.
- The 3 patch series "mm: hugetlb: cleanup hugetlb folio allocation"
from Kefeng Wang does some tidying in the hugetlb folio allocation code.
- The 12 patch series "mm: establish const-correctness for pointer
parameters" from Max Kellermann makes quite a number of the MM API
functions more accurate about the constness of their arguments. This
was getting in the way of subsystems (in this case CEPH) when they
attempt to improving their own const/non-const accuracy.
- The 7 patch series "Cleanup free_pages() misuse" from Vishal Moola
fixes a number of code sites which were confused over when to use
free_pages() vs __free_pages().
- The 3 patch series "Add Rust abstraction for Maple Trees" from Alice
Ryhl makes the mapletree code accessible to Rust. Required by nouveau
and by its forthcoming successor: the new Rust Nova driver.
- The 2 patch series "selftests/mm: split_huge_page_test:
split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and
some cleanups to the thp selftesting code.
- The 14 patch series "mm, swap: introduce swap table as swap cache
(phase I)" from Chris Li and Kairui Song is the first step along the
path to implementing "swap tables" - a new approach to swap allocation
and state tracking which is expected to yield speed and space
improvements. This patchset itself yields a 5-20% performance benefit
in some situations.
- The 3 patch series "Some ptdesc cleanups" from Matthew Wilcox utilizes
the new memdesc layer to clean up the ptdesc code a little.
- The 3 patch series "Fix va_high_addr_switch.sh test failure" from
Chunyu Hu fixes some issues in our 5-level pagetable selftesting code.
- The 2 patch series "Minor fixes for memory allocation profiling" from
Suren Baghdasaryan addresses a couple of minor issues in relatively new
memory allocation profiling feature.
- The 3 patch series "Small cleanups" from Matthew Wilcox has a few
cleanups in preparation for more memdesc work.
- The 2 patch series "mm/damon: add addr_unit for DAMON_LRU_SORT and
DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in
furtherance of supporting arm highmem.
- The 2 patch series "selftests/mm: Add -Wunreachable-code and fix
warnings" from Muhammad Anjum adds that compiler check to selftests code
and fixes the fallout, by removing dead code.
- The 10 patch series "Improvements to Victim Process Thawing and OOM
Reaper Traversal Order" from zhongjinji makes a number of improvements
in the OOM killer: mainly thawing a more appropriate group of victim
threads so they can release resources.
- The 5 patch series "mm/damon: misc fixups and improvements for 6.18"
from SeongJae Park is a bunch of small and unrelated fixups for DAMON.
- The 7 patch series "mm/damon: define and use DAMON initialization
check function" from SeongJae Park implement reliability and
maintainability improvements to a recently-added bug fix.
- The 2 patch series "mm/damon/stat: expose auto-tuned intervals and
non-idle ages" from SeongJae Park provides additional transparency to
userspace clients of the DAMON_STAT information.
- The 2 patch series "Expand scope of khugepaged anonymous collapse"
from Dev Jain removes some constraints on khubepaged's collapsing of
anon VMAs. It also increases the success rate of MADV_COLLAPSE against
an anon vma.
- The 2 patch series "mm: do not assume file == vma->vm_file in
compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards
removal of file_operations.mmap(). This patchset concentrates upon
clearing up the treatment of stacked filesystems.
- The 6 patch series "mm: Improve mlock tracking for large folios" from
Kiryl Shutsemau provides some fixes and improvements to mlock's tracking
of large folios. /proc/meminfo's "Mlocked" field became more accurate.
- The 2 patch series "mm/ksm: Fix incorrect accounting of KSM counters
during fork" from Donet Tom fixes several user-visible KSM stats
inaccuracies across forks and adds selftest code to verify these
counters.
- The 2 patch series "mm_slot: fix the usage of mm_slot_entry" from Wei
Yang addresses some potential but presently benign issues in KSM's
mm_slot handling.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN3cywAKCRDdBJ7gKXxA
jtaPAQDmIuIu7+XnVUK5V11hsQ/5QtsUeLHV3OsAn4yW5/3dEQD/UddRU08ePN+1
2VRB0EwkLAdfMWW7TfiNZ+yhuoiL/AA=
=4mhY
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
Lots of platform specific updates for Qualcomm SoCs, including a
new TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with the
M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed, Broadcom,
Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmjdpaoACgkQmmx57+YA
GNnBXA//QgmFXYGG7QfB825mt0orKZxpfpLcwvqO7hkWgbXtl7Gokw2lGYN6bwLu
zvY4MQ/bVoZ8R5uTVmuaSHBRsttSen8mBf+V0vzsBM/DRRVxvIN/7TESrY3J7Dtx
J5syHKIBiUtdkDebWWC6jIElczIBItsd03Ln4Xjjt8Vas5YOO4n44zFrPo+FwlN/
I6D2K86AiNZTtUCDMtB6VfJ6YtjYBWcWnJm7FXw/vE8FAXdZUnNWnZ8hbdQ5GaME
JZGepUhONaOMUoGNZNaDGw511RdPhYzPjj9rCsIx2qdsRO9/4tJ8ccpW2aUMYh8c
nA6w8Hj8jCwco6aYYrDUDV9uRtURDrmyJgTJBNLU05e/L+MuJ3IZNlzHFWlsxIAE
vhyTdmg/P04ClQyixCl67IH/66F/0smX9C+1761LrD7GTdfR92KPl5W6q+DPBg/x
yf+s2p3+f7ItV5XobKOrbf3w0xazeDb5o/EK8BufMx9vSe9bpzJ0gOf0CmNXEpyZ
owAhbh6wXX1YwPcyA9LHv6gthyJwc/3fLu49ggMZP2rU01ccKOYn9H0cr7C8NVmy
wEpJR0lp5aSw2oRkPkxB6sFmUohcpr8/OXGGJuvCXkYsUY1BEup4lewvbIWK4WoE
c84kbbaHsjgFhe3IRlQw3G4KLYQT3jRtF7fH+gPx556BcI6K+lg=
=mcZR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
This request fixes a number of small bugs, but has some more major
changes:
Loongson-2K BMC support is added. This is an MFD device and is
dependent on the changes coming from that tree. There is a
conflict in the MAINTAINERS file and the MFD tree changes must be
there before this is applied.
The way the driver handles BMCs that have become non-functional
has been completely redone. A number of changes in the past have
attempted to handle various issues around this, but nothing has
been very good. After working with some people on this, the
code has been reworked to disable the driver and fail all
pending operations if the BMC becomes non functional. It will
retry the BMC once a second to see if it's back up.
-corey
-----BEGIN PGP SIGNATURE-----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=mDVO
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.18-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Bug fixes and enhancements for IPMI
This fixes a number of small bugs, but has some more major changes:
- Loongson-2K BMC support is added. This is an MFD device and is
dependent on the changes coming from that tree.
The way the driver handles BMCs that have become non-functional has
been completely redone. A number of changes in the past have
attempted to handle various issues around this, but nothing has
been very good. After working with some people on this, the code
has been reworked to disable the driver and fail all pending
operations if the BMC becomes non functional. It will retry the BMC
once a second to see if it's back up"
* tag 'for-linus-6.18-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Add Loongson-2K BMC support
ipmi:si: Gracefully handle if the BMC is non-functional
ipmi: Rename "user_data" to "recv_msg" in an SMI message
ipmi: Allow an SMI sender to return an error
ipmi:si: Move flags get start to its own function
ipmi:si: Merge some if statements
ipmi: Set a timer for maintenance mode
ipmi: Add a maintenance mode sysfs file
ipmi: Disable sysfs access and requests in maintenance mode
ipmi: Differentiate between reset and firmware update in maintenance
dt-bindings: ipmi: aspeed,ast2400-kcs-bmc: Add missing "clocks" property
ipmi: Rework user message limit handling
Revert "ipmi: fix msg stack when IPMI is disconnected"
ipmi:msghandler:Change seq_lock to a mutex
Fix division by zero in ks_sa_rng_init caused by missing clock
pointer initialization. The clk_get_rate() call is performed on
an uninitialized clk pointer, resulting in division by zero when
calculating delay values.
Add clock initialization code before using the clock.
Fixes: 6d01d8511d ("hwrng: ks-sa - Add minimum sleep time before ready-polling")
Signed-off-by: Nishanth Menon <nm@ti.com>
drivers/char/hw_random/ks-sa-rng.c | 7 +++++++
1 file changed, 7 insertions(+)
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Cc: David S. Miller <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Commit 5c83b07df9 ("tpm: Add a driver for Loongson TPM device") has a
semantic conflict with commit 07d8004d6f ("tpm: add bufsiz parameter
in the .send callback"), as the former change was developed against a
tree without the latter change. This results in a build error:
drivers/char/tpm/tpm_loongson.c:48:17: error: initialization of 'int (*)(struct tpm_chip *, u8 *, size_t, size_t)' {aka 'int (*)(struct tpm_chip *, unsigned char *, long unsigned int, long unsigned int)'} from incompatible pointer type 'int (*)(struct tpm_chip *, u8 *, size_t)' {aka 'int (*)(struct tpm_chip *, unsigned char *, long unsigned int)'} [-Wincompatible-pointer-types]
48 | .send = tpm_loongson_send,
| ^~~~~~~~~~~~~~~~~
drivers/char/tpm/tpm_loongson.c:48:17: note: (near initialization for 'tpm_loongson_ops.send')
drivers/char/tpm/tpm_loongson.c:31:12: note: 'tpm_loongson_send' declared here
31 | static int tpm_loongson_send(struct tpm_chip *chip, u8 *buf, size_t count)
| ^~~~~~~~~~~~~~~~~
Add the expected bufsiz parameter to tpm_loongson_send() to resolve the
error.
Fixes: 5c83b07df9 ("tpm: Add a driver for Loongson TPM device")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
This patch adds Loongson-2K BMC IPMI support.
According to the existing design, we use software simulation to
implement the KCS interface registers: Stauts/Command/Data_Out/Data_In.
Also since both host side and BMC side read and write kcs status, fifo flag
is used to ensure data consistency.
The single KCS message block is as follows:
+-------------------------------------------------------------------------+
|FIFO flags| KCS register data | CMD data | KCS version | WR REQ | WR ACK |
+-------------------------------------------------------------------------+
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Message-ID: <8f9ffb6f0405345af8f04193ce1510aacd075e72.1756987761.git.zhoubinbin@loongson.cn>
Signed-off-by: Corey Minyard <corey@minyard.net>
Attempt to map aligned to huge page size for private mapping which could
achieve performance gains, the mprot_tw4m in libMicro average execution
time on arm64:
- Test case: mprot_tw4m
- Before the patch: 22 us
- After the patch: 17 us
If THP config is not set, we fall back to system page size mappings.
Link: https://lkml.kernel.org/r/20250731122305.2669090-1-zhangqilong3@huawei.com
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LAN969x uses the Atmel HWRNG, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
If the BMC is not functional, the driver goes into an error state and
starts a 1 second timer. When the timer times out, it will attempt a
simple message. If the BMC interacts correctly, the driver will start
accepting messages again. If not, it remains in error state.
If the driver goes into error state, all messages current and pending
will return with an error.
This should more gracefully handle when the BMC becomes non-operational,
as opposed to trying each messages individually and failing them.
Signed-off-by: Corey Minyard <corey@minyard.net>
It's only used to hold the corresponding receive message, so fix the
name to make that clear and the type so nothing else can be accidentally
assigned to it.
Signed-off-by: Corey Minyard <corey@minyard.net>
Getting ready for handling when a BMC is non-responsive or broken, allow
the sender operation to fail in an SMI. If it was a user-generated
message it will return the error.
The powernv code was already doing this internally, but the way it was
written could result in deep stack descent if there were a lot of
messages queued. Have its send return an error in this case.
Signed-off-by: Corey Minyard <corey@minyard.net>
Now that maintenance mode rejects all messages, there's nothing to
run time timer. Make sure the timer is running in maintenance mode.
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Frederick Lawler <fred@cloudflare.com>
So you can see if it's in maintenance mode and see how long is left.
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Frederick Lawler <fred@cloudflare.com>
If the driver goes into any maintenance mode, disable sysfs access until
it is done.
If the driver goes into reset maintenance mode, disable all messages
until it is done.
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Frederick Lawler <fred@cloudflare.com>
This allows later changes to have different behaviour during a reset
verses a firmware update.
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Frederick Lawler <fred@cloudflare.com>
The limit on the number of user messages had a number of issues,
improper counting in some cases and a use after free.
Restructure how this is all done to handle more in the receive message
allocation routine, so all refcouting and user message limit counts
are done in that routine. It's a lot cleaner and safer.
Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Closes: https://lore.kernel.org/lkml/aLsw6G0GyqfpKs2S@mail.minyard.net/
Fixes: 8e76741c3d ("ipmi: Add a limit on the number of users that may use IPMI")
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
This reverts commit c608966f3f.
This patch has a subtle bug that can cause the IPMI driver to go into an
infinite loop if the BMC misbehaves in a certain way. Apparently
certain BMCs do misbehave this way because several reports have come in
recently about this.
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Eric Hagberg <ehagberg@janestreet.com>
Cc: <stable@vger.kernel.org> # 6.2
Dan Carpenter got a Smatch warning:
drivers/char/ipmi/ipmi_msghandler.c:5265 ipmi_free_recv_msg()
warn: sleeping in atomic context
due to the recent rework of the IPMI driver's locking. I didn't realize
vfree could block. But there is an easy solution to this, now that
almost everything in the message handler runs in thread context.
I wanted to spend the time earlier to see if seq_lock could be converted
from a spinlock to a mutex, but I wanted the previous changes to go in
and soak before I did that. So I went ahead and did the analysis and
converting should work. And solve this problem.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202503240244.LR7pOwyr-lkp@intel.com/
Fixes: 3be997d5a6 ("ipmi:msghandler: Remove srcu from the ipmi user structure")
Cc: <stable@vger.kernel.org> # 6.16
Signed-off-by: Corey Minyard <corey@minyard.net>
Currently, misc_deregister() uses list_del() to remove the device
from the list. After list_del(), the list pointers are set to
LIST_POISON1 and LIST_POISON2, which may help catch use-after-free bugs,
but does not reset the list head.
If misc_deregister() is called more than once on the same device,
list_empty() will not return true, and list_del() may be called again,
leading to undefined behavior.
Replace list_del() with list_del_init() to reinitialize the list head
after deletion. This makes the code more robust against double
deregistration and allows safe usage of list_empty() on the miscdevice
after deregistration.
[ Note, this seems to keep broken out-of-tree drivers from doing foolish
things. While this does not matter for any in-kernel drivers,
external drivers could use a bit of help to show them they shouldn't
be doing stuff like re-registering misc devices - gregkh ]
Signed-off-by: Xion Wang <xion.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250904063714.28925-2-xion.wang@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The WARN_ON(list_empty(&misc->list)) in misc_deregister() does
not catch any practical error conditions:
- For statically allocated miscdevice structures, the list pointers
are zero-initialized, so list_empty() returns false, not true.
- After list_del(), the pointers are set to LIST_POISON1 and LIST_POISON2,
so repeated deregistration also fails to trigger the check.
Signed-off-by: Xion Wang <xion.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250827024201.21407-2-xion.wang@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function parameter 'size_t count' is unsigned and cannot be less
than zero. Remove the redundant condition.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250903202350.182446-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loongson Security Engine supports random number generation, hash,
symmetric encryption and asymmetric encryption. Based on these
encryption functions, TPM2 have been implemented in the Loongson
Security Engine firmware. This driver is responsible for copying data
into the memory visible to the firmware and receiving data from the
firmware.
Co-developed-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250705072045.1067-4-zhaoqunqin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
misc_open() may request module for miscdevice with dynamic minor, which
is meaningless since:
- The dynamic minor allocated is unknown in advance without registering
miscdevice firstly.
- Macro MODULE_ALIAS_MISCDEV() is not applicable for dynamic minor.
Fix by only requesting module for miscdevice with fixed minor.
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-6-2ed949665bde@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For miscdevice who wants dynamic minor, it may fail to be registered again
without reinitialization after being de-registered, which is illustrated
by kunit test case miscdev_test_dynamic_reentry() newly added.
There is a real case found by cascardo when a part of minor range were
contained by range [0, 255):
1) wmi/dell-smbios registered minor 122, and acpi_thermal_rel registered
minor 123
2) unbind "int3400 thermal" driver from its device, this will de-register
acpi_thermal_rel
3) rmmod then insmod dell_smbios again, now wmi/dell-smbios is using minor
123
4) bind the device to "int3400 thermal" driver again, acpi_thermal_rel
fails to register.
Some drivers may reuse the miscdevice structure after they are deregistered
If the intention is to allocate a dynamic minor, if the minor number is not
reset to MISC_DYNAMIC_MINOR before calling misc_register(), it will try to
register a previously dynamically allocated minor number, which may have
been registered by a different driver.
One such case is the acpi_thermal_rel misc device, registered by the
int3400 thermal driver. If the device is unbound from the driver and later
bound, if there was another dynamic misc device registered in between, it
would fail to register the acpi_thermal_rel misc device. Other drivers
behave similarly.
Actually, this kind of issue is prone to happen if APIs
misc_register()/misc_deregister() are invoked by driver's
probe()/remove() separately.
Instead of fixing all the drivers, just reset the minor member to
MISC_DYNAMIC_MINOR in misc_deregister() in case it was a dynamically
allocated minor number, as error handling of misc_register() does.
Cc: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-5-2ed949665bde@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For miscdevice who wants dynamic minor, add a cast to test if it can be
successfully registered again without reinitialization:
1) Provide Both miscdevice @dev_A and @dev_B want to request dynamic
minor by initializing their minor to MISC_DYNAMIC_MINOR.
2) Register then de-register @dev_A.
3) Register @dev_B.
4) Register @dev_A again without reinitialization.
5) Check if @dev_A can be successfully registered.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-4-2ed949665bde@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, It is allowed to register miscdevice with minor > 255
which is defined by macro MISC_DYNAMIC_MINOR, and cause:
- Chaos regarding division and management of minor codes.
- Registering failure if the minor was allocated to other dynamic request.
Fortunately, in-kernel users have not had such usage yet.
Fix by refusing to register miscdevice whose minor > 255.
Also bring in a very simple minor code space division and management:
< 255 : Fixed minor code
== 255 : Indicator to request dynamic minor code
> 255 : Dynamic minor code requested, 1048320 minor codes totally
And all fixed minors allocated should be registered in 'linux/miscdevice.h'
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-3-2ed949665bde@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adapt and add test cases for next change which regards minor whose
value > macro MISC_DYNAMIC_MINOR as invalid parameter when register
miscdevice, hence get a simple minor space division below:
< MISC_DYNAMIC_MINOR: fixed minor code
== MISC_DYNAMIC_MINOR: indicator to request dynamic minor code
> MISC_DYNAMIC_MINOR: dynamic minor code requested
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-2-2ed949665bde@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/misc/misc_minor_kunit.c is to test APIs defined in
drivers/char/misc.c, but is not in the same directory as the later.
Move misc_minor_kunit.c to drivers/char/.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-1-2ed949665bde@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is better to replace ns_to_ktime() with us_to_ktime(),
which can make the code clearer.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Compile-testing this driver is only possible when the AMBA bus driver is
available in the kernel:
x86_64-linux-ld: drivers/char/hw_random/nomadik-rng.o: in function `nmk_rng_remove':
nomadik-rng.c:(.text+0x67): undefined reference to `amba_release_regions'
x86_64-linux-ld: drivers/char/hw_random/nomadik-rng.o: in function `nmk_rng_probe':
nomadik-rng.c:(.text+0xee): undefined reference to `amba_request_regions'
x86_64-linux-ld: nomadik-rng.c:(.text+0x18d): undefined reference to `amba_release_regions'
The was previously implied by the 'depends on ARCH_NOMADIK', but needs to be
specified for the COMPILE_TEST case.
Fixes: d5e93b3374 ("hwrng: Kconfig - Add helper dependency on COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nothing huge, some rate limiting on logs, a strncpy fix where the source
and destination could be the same, and removal of some unused cruft.
-----BEGIN PGP SIGNATURE-----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=0zUC
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.17-1' of https://github.com/cminyard/linux-ipmi
Pull ipmi updates from Corey Minyard:
"Some small fixes for the IPMI driver
Nothing huge, some rate limiting on logs, a strncpy fix where the
source and destination could be the same, and removal of some unused
cruft"
* tag 'for-linus-6.17-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Use dev_warn_ratelimited() for incorrect message warnings
char: ipmi: remove redundant variable 'type' and check
ipmi: Fix strcpy source and destination the same
API:
- Allow hash drivers without fallbacks (e.g., hardware key).
Algorithms:
- Add hmac hardware key support (phmac) on s390.
- Re-enable sha384 in FIPS mode.
- Disable sha1 in FIPS mode.
- Convert zstd to acomp.
Drivers:
- Lower priority of qat skcipher and aead.
- Convert aspeed to partial block API.
- Add iMX8QXP support in caam.
- Add rate limiting support for GEN6 devices in qat.
- Enable telemetry for GEN6 devices in qat.
- Implement full backlog mode for hisilicon/sec2.
-----BEGIN PGP SIGNATURE-----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=E8nj
-----END PGP SIGNATURE-----
Merge tag 'v6.17-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Allow hash drivers without fallbacks (e.g., hardware key)
Algorithms:
- Add hmac hardware key support (phmac) on s390
- Re-enable sha384 in FIPS mode
- Disable sha1 in FIPS mode
- Convert zstd to acomp
Drivers:
- Lower priority of qat skcipher and aead
- Convert aspeed to partial block API
- Add iMX8QXP support in caam
- Add rate limiting support for GEN6 devices in qat
- Enable telemetry for GEN6 devices in qat
- Implement full backlog mode for hisilicon/sec2"
* tag 'v6.17-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: keembay - Use min() to simplify ocs_create_linked_list_from_sg()
crypto: hisilicon/hpre - fix dma unmap sequence
crypto: qat - make adf_dev_autoreset() static
crypto: ccp - reduce stack usage in ccp_run_aes_gcm_cmd
crypto: qat - refactor ring-related debug functions
crypto: qat - fix seq_file position update in adf_ring_next()
crypto: qat - fix DMA direction for compression on GEN2 devices
crypto: jitter - replace ARRAY_SIZE definition with header include
crypto: engine - remove {prepare,unprepare}_crypt_hardware callbacks
crypto: engine - remove request batching support
crypto: qat - flush misc workqueue during device shutdown
crypto: qat - enable rate limiting feature for GEN6 devices
crypto: qat - add compression slice count for rate limiting
crypto: qat - add get_svc_slice_cnt() in device data structure
crypto: qat - add adf_rl_get_num_svc_aes() in rate limiting
crypto: qat - relocate service related functions
crypto: qat - consolidate service enums
crypto: qat - add decompression service for rate limiting
crypto: qat - validate service in rate limiting sysfs api
crypto: hisilicon/sec2 - implement full backlog mode for sec
...
Here is the big set of char/misc/iio and other smaller driver subsystems
for 6.17-rc1. It's a big set this time around, with the huge majority
being in the iio subsystem with new drivers and dts files being added
there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeYDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3dwCdF6xoEVZaDkLM5IF3XKWWgdYxjNsAoKUy2kUx
YtmVh4S0tMmugfeRGac7
=3Wxi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
This PR has quite a few commits but nothing really that would be worth of
spending too much time for, or would want to emphasize in particular.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaIAmHQAKCRAaerohdGur
0pBVAP94mutr2EyDyvJWpzej0fWROHzL1EkJacuKxmabt7HnJgEA9H8Ug6OoAdKq
V1v+Z9iL1wrQ3Yfp28vHhdrAQUgDJgA=
=cjP7
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Quite a few commits but nothing really that would be worth of spending
too much time for, or would want to emphasize in particular"
* tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb_ffa: handle tpm busy return code
tpm_crb_ffa: Remove memset usage
tpm_crb_ffa: Fix typos in function name
tpm: Check for completion after timeout
tpm: Use of_reserved_mem_region_to_resource() for "memory-region"
tpm: Replace scnprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show functions
tpm_crb_ffa: Remove unused export
tpm: tpm_crb_ffa: try to probe tpm_crb_ffa when it's built-in
firmware: arm_ffa: Change initcall level of ffa_init() to rootfs_initcall
tpm/tpm_svsm: support TPM_CHIP_FLAG_SYNC
tpm/tpm_ftpm_tee: support TPM_CHIP_FLAG_SYNC
tpm: support devices with synchronous send()
tpm: add bufsiz parameter in the .send callback
This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants. These APIs will allow further simplifications across the
kernel as users start using them instead of the old-school crypto API.
(I've already written a lot of such conversion patches, removing over
1000 more lines of code. But most of those will target 6.18 or later.)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ93BQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK8HCAQD3O9P0qd6wscne5XuRwaybzKHQ2AqU
OlhlDZWQQEvYAgD/aa6KP/DS+8RKGj0TBn6bACAJyXyDygFXq5a5s9pGzAs=
=UmMM
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
* one extra reference is enough to pin a dentry down; no need
for two. Switch to regular scheme, similar to shmem, debugfs,
etc. - that fixes securityfs_recursive_remove() dentry leak,
among other things.
* we need to have the filesystem pinned to prevent the contents
disappearing; what we do not need is pinning it for each file.
Doing that only for files and directories in the root is enough.
* the previous two changes allow to get rid of the racy kludges
in efi_secret_unlink(), where we can use simple_unlink() instead
of securityfs_remove(). Which does not require unlocking and
relocking the parent, with all deadlocks that invites.
* Make securityfs_remove() take the entire subtree out, turning
securityfs_recursive_remove() into its alias. Makes a lot more
sense for callers and fixes a mount leak, while we are at it.
* Making securityfs_remove() remove the entire subtree allows for
much simpler life in most of the users - efi_secret, ima_fs,
evm, ipe, tmp get cleaner. I hadn't touched apparmor use of
securityfs, but I suspect that it would be useful there as well.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaIRJkgAKCRBZ7Krx/gZQ
67PmAQCCmJ8Czxb0+4P2J8bJFDELvrT3ff0Ns2d/1m77cATdBAEArOxw5iNXfpfU
0WhjMvQFsgob6jtijG1MAWV7Npz4MwE=
=wraS
-----END PGP SIGNATURE-----
Merge tag 'pull-securityfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull securityfs updates from Al Viro:
"Securityfs cleanups and fixes:
- one extra reference is enough to pin a dentry down; no need for
two. Switch to regular scheme, similar to shmem, debugfs, etc. This
fixes a securityfs_recursive_remove() dentry leak, among other
things.
- we need to have the filesystem pinned to prevent the contents
disappearing; what we do not need is pinning it for each file.
Doing that only for files and directories in the root is enough.
- the previous two changes allow us to get rid of the racy kludges in
efi_secret_unlink(), where we can use simple_unlink() instead of
securityfs_remove(). Which does not require unlocking and relocking
the parent, with all deadlocks that invites.
- Make securityfs_remove() take the entire subtree out, turning
securityfs_recursive_remove() into its alias. Makes a lot more
sense for callers and fixes a mount leak, while we are at it.
- Making securityfs_remove() remove the entire subtree allows for
much simpler life in most of the users - efi_secret, ima_fs, evm,
ipe, tmp get cleaner. I hadn't touched apparmor use of securityfs,
but I suspect that it would be useful there as well"
* tag 'pull-securityfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
tpm: don't bother with removal of files in directory we'll be removing
ipe: don't bother with removal of files in directory we'll be removing
evm_secfs: clear securityfs interactions
ima_fs: get rid of lookup-by-dentry stuff
ima_fs: don't bother with removal of files in directory we'll be removing
efi_secret: clean securityfs use up
make securityfs_remove() remove the entire subtree
fix locking in efi_secret_unlink()
securityfs: pin filesystem only for objects directly in root
securityfs: don't pin dentries twice, once is enough...
Platforms supporting direct message request v2 [1] can support secure
partitions that support multiple services. For CRB over FF-A interface,
if the firmware TPM or TPM service [1] shares its Secure Partition (SP)
with another service, message requests may fail with a -EBUSY error.
To handle this, replace the single check and call with a retry loop
that attempts the TPM message send operation until it succeeds or a
configurable timeout is reached. Implement a _try_send_receive function
to do a single send/receive and modify the existing send_receive to
add this retry loop.
The retry mechanism introduces a module parameter (`busy_timeout_ms`,
default: 2000ms) to control how long to keep retrying on -EBUSY
responses. Between retries, the code waits briefly (50-100 microseconds)
to avoid busy-waiting and handling TPM BUSY conditions more gracefully.
The parameter can be modified at run-time as such:
echo 3000 | tee /sys/module/tpm_crb_ffa/parameters/busy_timeout_ms
This changes the timeout from the default 2000ms to 3000ms.
[1] TPM Service Command Response Buffer Interface Over FF-A
https://developer.arm.com/documentation/den0138/latest/
Signed-off-by: Prachotan Bathi <prachotan.bathi@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Simplify initialization of `ffa_send_direct_data2` and
`ffa_send_direct_data` structures by using designated initializers
instead of `memset()` followed by field assignments, reducing code size
and improving readability.
Signed-off-by: Prachotan Bathi <prachotan.bathi@arm.com>
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The current implementation of timeout detection works in the following
way:
1. Read completion status. If completed, return the data
2. Sleep for some time (usleep_range)
3. Check for timeout using current jiffies value. Return an error if
timed out
4. Goto 1
usleep_range doesn't guarantee it's always going to wake up strictly in
(min, max) range, so such a situation is possible:
1. Driver reads completion status. No completion yet
2. Process sleeps indefinitely. In the meantime, TPM responds
3. We check for timeout without checking for the completion again.
Result is lost.
Such a situation also happens for the guest VMs: if vCPU goes to sleep
and doesn't get scheduled for some time, the guest TPM driver will
timeout instantly after waking up without checking for the completion
(which may already be in place).
Perform the completion check once again after exiting the busy loop in
order to give the device the last chance to send us some data.
Since now we check for completion in two places, extract this check into
a separate function.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formating the value to be
returned to user space. So replace scnprintf() with sysfs_emit().
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Remove the export of tpm_crb_ffa_get_interface_version() as it has no
callers outside tpm_crb_ffa.
Fixes: eb93f0734e ("tpm_crb: ffa_tpm: Implement driver compliant to CRB over FF-A")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
To generate the boot_aggregate log in the IMA subsystem using TPM PCR
values, the TPM driver must be built as built-in and must be probed
before the IMA subsystem is initialized.
However, when the TPM device operates over the FF-A protocol using the
CRB interface, probing fails and returns -EPROBE_DEFER if the
tpm_crb_ffa device — an FF-A device that provides the communication
interface to the tpm_crb driver — has not yet been probed.
This issue occurs because both crb_acpi_driver_init() and
tpm_crb_ffa_driver_init() are registered with device_initcall. As a
result, crb_acpi_driver_init() may be invoked before
tpm_crb_ffa_driver_init(), which is responsible for probing the
tpm_crb_ffa device.
When this happens, IMA fails to detect the TPM device and logs the
following message:
| ima: No TPM chip found, activating TPM-bypass!
Consequently, it cannot generate the boot_aggregate log with the PCR
values provided by the TPM.
To resolve this issue, the tpm_crb_ffa_init() function explicitly
attempts to probe the tpm_crb_ffa by register tpm_crb_ffa driver so that
when tpm_crb_ffa device is created before tpm_crb_ffa_init(), probe the
tpm_crb_ffa device in tpm_crb_ffa_init() to finish probe the TPM device
completely.
This ensures that the TPM device using CRB over FF-A can be successfully
probed, even if crb_acpi_driver_init() is called first.
[ jarkko: reformatted some of the paragraphs because they were going past
the 75 character boundary. ]
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This driver does not support interrupts, and receiving the response is
synchronous with sending the command.
Enable synchronous send() with TPM_CHIP_FLAG_SYNC, which implies that
->send() already fills the provided buffer with a response, and ->recv()
is not implemented.
Keep using the same pre-allocated buffer to avoid having to allocate
it for each command. We need the buffer to have the header required by
the SVSM protocol and the command contiguous in memory.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This driver does not support interrupts, and receiving the response is
synchronous with sending the command.
Enable synchronous send() with TPM_CHIP_FLAG_SYNC, which implies that
->send() already fills the provided buffer with a response, and ->recv()
is not implemented.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Some devices do not support interrupts and provide a single synchronous
operation to send the command and receive the response on the same buffer.
Currently, these types of drivers must use an internal buffer where they
temporarily store the response between .send() and .recv() calls.
Introduce a new flag (TPM_CHIP_FLAG_SYNC) to support synchronous send().
If that flag is set by the driver, tpm_try_transmit() will use the send()
callback to send the command and receive the response on the same buffer
synchronously. In that case send() return the number of bytes of the
response on success, or -errno on failure.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add a new `bufsiz` parameter to the `.send` callback in `tpm_class_ops`.
This parameter will allow drivers to differentiate between the actual
command length to send and the total buffer size. Currently `bufsiz` is
not used, but it will be used to implement devices with synchronous send()
to send the command and receive the response on the same buffer.
Also rename the previous parameter `len` to `cmd_len` in the declaration
to make it clear that it contains the length in bytes of the command
stored in the buffer. The semantics don't change and it can be used as
before by drivers. This is an optimization since the drivers could get it
from the header, but let's avoid duplicating code.
While we are here, resolve a checkpatch warning:
WARNING: Unnecessary space before function pointer arguments
#66: FILE: include/linux/tpm.h:90:
+ int (*send) (struct tpm_chip *chip, u8 *buf, size_t bufsiz,
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During BMC firmware upgrades on live systems, the ipmi_msghandler
generates excessive "BMC returned incorrect response" warnings
while the BMC is temporarily offline. This can flood system logs
in large deployments.
Replace dev_warn() with dev_warn_ratelimited() to throttle these
warnings and prevent log spam during BMC maintenance operations.
Signed-off-by: Breno Leitao <leitao@debian.org>
Message-ID: <20250710-ipmi_ratelimit-v1-1-6d417015ebe9@debian.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
Since commit 172efbb403 ("AGP: Try unsupported AGP chipsets on x86-64
by default"), the AGP driver for AMD Opteron/Athlon64 CPUs has attempted
to bind to any PCI device possessing an AGP Capability.
Commit 6fd0248939 ("amd64-agp: Probe unknown AGP devices the right
way") subsequently reworked the driver to perform a bind attempt to
any PCI device (regardless of AGP Capability) and reject a device in
the driver's ->probe() hook if it lacks the AGP Capability.
On modern CPUs exposing an AMD IOMMU, this subtle change results in an
annoying message with KERN_CRIT severity:
pci 0000:00:00.2: Resources present before probing
The message is emitted by the driver core prior to invoking a driver's
->probe() hook. The check for an AGP Capability in the ->probe() hook
happens too late to prevent the message.
The message has appeared only recently with commit 3be5fa2366 (Revert
"iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices").
Prior to the commit, no driver could bind to AMD IOMMUs.
The reason for the message is that an MSI is requested early on for the
AMD IOMMU, which results in a call from msi_sysfs_create_group() to
devm_device_add_group(). A devres resource is thus attached to the
driver-less AMD IOMMU, which is normally not allowed, but presumably
cannot be avoided because requesting the MSI from a regular PCI driver
might be too late.
Avoid the message by once again checking for an AGP Capability *before*
binding to an unsupported device. Achieve that by way of the PCI core's
dynid functionality.
pci_add_dynid() can fail only with -ENOMEM (on allocation failure) or
-EINVAL (on bus_to_subsys() failure). It doesn't seem worth the extra
code to propagate those error codes out of the for_each_pci_dev() loop,
so simply error out with -ENODEV if there was no successful bind attempt.
In the -ENOMEM case, a splat is emitted anyway, and the -EINVAL case can
never happen because it requires failure of bus_register(&pci_bus_type),
in which case there's no driver probing of PCI devices.
Hans has voiced a preference to no longer probe unsupported devices by
default (i.e. set agp_try_unsupported = 0). In fact, the help text for
CONFIG_AGP_AMD64 pretends this to be the default. Alternatively, he
proposes probing only devices with PCI_CLASS_BRIDGE_HOST. However these
approaches risk regressing users who depend on the existing behavior.
Fixes: 3be5fa2366 (Revert "iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices")
Reported-by: Fedor Pchelkin <pchelkin@ispras.ru>
Closes: https://lore.kernel.org/r/wpoivftgshz5b5aovxbkxl6ivvquinukqfvb5z6yi4mv7d25ew@edtzr2p74ckg/
Reported-by: Hans de Goede <hansg@kernel.org>
Closes: https://lore.kernel.org/r/20250625112411.4123-1-hansg@kernel.org/
Tested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/b29e7fbfc6d146f947603d0ebaef44cbd2f0d754.1751468802.git.lukas@wunner.de
The variable 'type' is assigned the value SI_INVALID which is zero
and later checks of 'type' is non-zero (which is always false). The
variable is not referenced anywhere else, so it is redundant and
so is the check, so remove these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-ID: <20250708151805.1893858-1-colin.i.king@gmail.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Currently the SHA-224 and SHA-256 library functions can be mixed
arbitrarily, even in ways that are incorrect, for example using
sha224_init() and sha256_final(). This is because they operate on the
same structure, sha256_state.
Introduce stronger typing, as I did for SHA-384 and SHA-512.
Also as I did for SHA-384 and SHA-512, use the names *_ctx instead of
*_state. The *_ctx names have the following small benefits:
- They're shorter.
- They avoid an ambiguity with the compression function state.
- They're consistent with the well-known OpenSSL API.
- Users usually name the variable 'sctx' anyway, which suggests that
*_ctx would be the more natural name for the actual struct.
Therefore: update the SHA-224 and SHA-256 APIs, implementation, and
calling code accordingly.
In the new structs, also strongly-type the compression function state.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
misc_init() returns -EIO for __register_chrdev() invocation failure, but:
- -EIO is for I/O error normally, but __register_chrdev() does not do I/O.
- -EIO can not cover various error codes returned by __register_chrdev().
Fix by returning error code of __register_chrdev().
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250620-fix_mischar-v1-3-6c2716bbf1fa@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It already depends on X86_32, but that's also set for ARCH=um.
Recent changes made UML no longer have IO port access since
it's not needed, but this driver uses it. Build it only for
HAS_IOPORT. This is pretty much the same as depending on X86,
but on the off-chance that HAS_IOPORT will ever be optional
on x86 HAS_IOPORT is the real prerequisite.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506060742.XR3HcxWA-lkp@intel.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250606071255.7722-2-johannes@sipsolutions.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The source and destination of some strcpy operations was the same.
Split out the part of the operations that needed to be done for those
particular calls so the unnecessary copy wasn't done.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506140756.EFXXvIP4-lkp@intel.com/
Signed-off-by: Corey Minyard <corey@minyard.net>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the normal
constant forward progress of new device support and cleanups to existing
subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet, xillybus,
cardreader drivers, fastrpc and others.)
All of these have been in linux-next for quite a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKg5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykUyACgmAzrzKMoQUwwhQ6ed2l7tHdrlOcAoIORI1/x
pNqQdrE1EbmAAyl47IN4
=ts6J
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
This is a restructure of the IPMI driver, mostly to remove SRCU. The
locking had issues, and they were not going to be straightforward to
fix. Plus it used tons of memory and was generally a pain.
Most of this moves handling of messages out of bh and interrupt context
and runs it in thread context. Then getting rid of SRCU is easy.
This also has a minor cleanup to remove a warning on newer GCCs and to
fix some documentation.
-----BEGIN PGP SIGNATURE-----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=e8Rg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.16-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Restructure the IPMI driver.
This is a restructure of the IPMI driver, mostly to remove SRCU. The
locking had issues, and they were not going to be straightforward to
fix. Plus it used tons of memory and was generally a pain.
Most of this moves handling of messages out of bh and interrupt
context and runs it in thread context. Then getting rid of SRCU is
easy.
This also has a minor cleanup to remove a warning on newer GCCs and to
fix some documentation"
* tag 'for-linus-6.16-1' of https://github.com/cminyard/linux-ipmi: (26 commits)
docs: ipmi: fix spelling and grammar mistakes
ipmi:msghandler: Fix potential memory corruption in ipmi_create_user()
ipmi:watchdog: Use the new interface for panic messages
ipmi:msghandler: Export and fix panic messaging capability
Documentation:ipmi: Remove comments about interrupt level
ipmi:ssif: Fix a shutdown race
ipmi:msghandler: Don't deliver messages to deleted users
ipmi:si: Rework startup of IPMI devices
ipmi:msghandler: Add a error return from unhandle LAN cmds
ipmi:msghandler: Shut down lower layer first at unregister
ipmi:msghandler: Remove proc_fs.h
ipmi:msghandler: Don't check for shutdown when returning responses
ipmi:msghandler: Don't acquire a user refcount for queued messages
ipmi:msghandler: Fix locking around users and interfaces
ipmi:msghandler: Remove some user level processing in panic mode
ipmi: Add a note about the pretimeout callback
ipmi:watchdog: Change lock to mutex
ipmi:msghandler: Remove srcu for the ipmi_interfaces list
ipmi:msghandler: Remove srcu from the ipmi user structure
ipmi:msghandler: Use the system_wq, not system_bh_wq
...
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
Changes
-------
* Reduce open-coded use of ratelimit_state structure fields.
* Convert the ->missed field to atomic_t.
* Count misses that are due to lock contention.
* Eliminate jiffies=0 special case.
* Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
* Allow zero ->burst to hard-disable rate limiting.
* Optimize away atomic operations when a miss is guaranteed.
* Warn if ->interval or ->burst are negative (Petr Mladek).
* Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet ready
for mainline. With luck, we will offer them for the v6.17 merge window.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmgzWdgTHHBhdWxtY2tA
a2VybmVsLm9yZwAKCRCevxLzctn7jBnZD/wKD+5f8qwEuaib901yLb/s4ZkS3Aly
mcPLAcTSFc7jp3c188V2qPAAgobQW+NnOLZ/TuB34tvS/Ngm/Yo1EPiHD2AXPzfY
FPlgmjvOQQQo9dfA1PNOegh/aKYhMJrho85cilcM1TojuSSVbo1lG1FbuvqMJ9Ub
jPHRB6KaFDnhwJkWHJ4Fjl1z1TQcyxjrBoswEcMCKapNqrm6IiXLvw03Nme3wa7F
tr30xue5GV/FyHMa14g/8GSpZ88Lr5VGsOoC0wz2KhfMsZcFRkmslgm8mxHawwXj
MbQaW7Th+fD7H0pC/lbHIiKaXvizYbQCPXr4qf5gfqNf4R/BHE1QdSTmP45kjEXO
CmZEwwVx8cVdyoY9N9udDhNZly/U83G3F1n38jdM2SCPjn3F8BAanZRwakLEvmCC
XUQ0bvzQvJl0LM5ktyaaMZdWf3p6uah7otryCPdsA5V7BFgyx5ZHniXY6v1JgfhX
2nmYRO3vEoQ39Z+vPtu7DvS64oe/aYgkSIoG68rKhSb4S+nIdIZ8zwB1af4Nkk8e
YZwlwjIRw+RCu/QET4GXLE1tHQ031kWR/xG8nDnNGE3XCjnfRArAcdMZNDlc3U5k
GT1g8zOJR2jmlEvWUZwpmclc1yeHXTK1P9nOHmzhxw26eiXmY353PZcND9Ktnt/a
RH550D0vUqFM7A==
=ivk+
-----END PGP SIGNATURE-----
Merge tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull rate-limit updates from Paul McKenney:
"lib/ratelimit: Reduce false-positive and silent misses:
- Reduce open-coded use of ratelimit_state structure fields.
- Convert the ->missed field to atomic_t.
- Count misses that are due to lock contention.
- Eliminate jiffies=0 special case.
- Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
- Allow zero ->burst to hard-disable rate limiting.
- Optimize away atomic operations when a miss is guaranteed.
- Warn if ->interval or ->burst are negative (Petr Mladek).
- Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet
ready for mainline. With luck, we will offer them for the v6.17 merge
window"
* tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
ratelimit: Drop redundant accesses to burst
ratelimit: Use nolock_ret restructuring to collapse common case code
ratelimit: Use nolock_ret label to collapse lock-failure code
ratelimit: Use nolock_ret label to save a couple of lines of code
ratelimit: Simplify common-case exit path
ratelimit: Warn if ->interval or ->burst are negative
ratelimit: Avoid atomic decrement under lock if already rate-limited
ratelimit: Avoid atomic decrement if already rate-limited
ratelimit: Don't flush misses counter if RATELIMIT_MSG_ON_RELEASE
ratelimit: Force re-initialization when rate-limiting re-enabled
ratelimit: Allow zero ->burst to disable ratelimiting
ratelimit: Reduce ___ratelimit() false-positive rate limiting
ratelimit: Avoid jiffies=0 special case
ratelimit: Count misses due to lock contention
ratelimit: Convert the ->missed field to atomic_t
drm/amd/pm: Avoid open-coded use of ratelimit_state structure's internals
drm/i915: Avoid open-coded use of ratelimit_state structure's ->missed field
random: Avoid open-coded use of ratelimit_state structure's ->missed field
ratelimit: Create functions to handle ratelimit_state internals
device emulated by a Secure VM Service Module (SVSM) - a helper module of sorts
which runs at a different privilege level in the SEV-SNP VM stack.
The intent being that a TPM device is emulated by a trusted entity and not by
the untrusted host which is the default assumption in the confidential
computing scenarios.
-----BEGIN PGP SIGNATURE-----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=tbNN
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD SEV update from Borislav Petkov:
"Add a virtual TPM driver glue which allows a guest kernel to talk to a
TPM device emulated by a Secure VM Service Module (SVSM) - a helper
module of sorts which runs at a different privilege level in the
SEV-SNP VM stack.
The intent being that a TPM device is emulated by a trusted entity and
not by the untrusted host which is the default assumption in the
confidential computing scenarios"
* tag 'x86_sev_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Register tpm-svsm platform device
tpm: Add SNP SVSM vTPM driver
svsm: Add header with SVSM_VTPM_CMD helpers
x86/sev: Add SVSM vTPM probe/send_command functions
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*() namespace
convention.
There are is another large converstion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next. The
conversion scripts will be run towards the end of the merge window and a
pull request sent once all conflict dependencies have been merged.
-----BEGIN PGP SIGNATURE-----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=FHGU
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
Boot code changes:
- A large series of changes to reorganize the x86 boot code into a better isolated
and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86 boot code
reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y
(Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary (Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar)
- Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish()
(Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>
(Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko,
Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae,
Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse,
Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout,
Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta,
Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak,
Xin Li)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JgQo
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
This is only a small pull request with fixes, as possible features moved
to +1 release.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaDDNEgAKCRAaerohdGur
0n1MAPwNIwmLrw+zBy/iCTlx8msGDpsPdMLc68ZOccnpN/e9fwD/Q0PH5RkWcmB4
ROHM8lljPg34RU46KyvXfZsgoCDoCwE=
=iJcd
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"This is only a small pull request with fixes, as possible features
moved to +1 release"
* tag 'tpmdd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb: ffa_tpm: fix/update comments describing the CRB over FFA ABI
tpm_crb_ffa: use dev_xx() macro to print log
tpm_ffa_crb: access tpm service over FF-A direct message request v2
tpm: remove kmalloc failure error message
API:
- Fix memcpy_sglist to handle partially overlapping SG lists.
- Use memcpy_sglist to replace null skcipher.
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK.
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS.
- Hide CRYPTO_MANAGER.
- Add delayed freeing of driver crypto_alg structures.
Compression:
- Allocate large buffers on first use instead of initialisation in scomp.
- Drop destination linearisation buffer in scomp.
- Move scomp stream allocation into acomp.
- Add acomp scatter-gather walker.
- Remove request chaining.
- Add optional async request allocation.
Hashing:
- Remove request chaining.
- Add optional async request allocation.
- Move partial block handling into API.
- Add ahash support to hmac.
- Fix shash documentation to disallow usage in hard IRQs.
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64.
- Drop avx10_256 xts(aes)/ctr(aes) on x86.
- Improve avx-512 optimisations for xts(aes).
- Move chacha arch implementations into lib/crypto.
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm.
- Disable powerpc/poly1305 as it has no SIMD fallback.
- Move sha256 arch implementations into lib/crypto.
- Convert deflate to acomp.
- Set block size correctly in cbcmac.
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss.
- Fix warm-reboot failure by making shutdown do more work in qat.
- Add locking in zynqmp-sha.
- Remove cavium/zip.
- Add support for PCI device 0x17D8 to ccp.
- Add qat_6xxx support in qat.
- Add support for RK3576 in rockchip-rng.
- Add support for i.MX8QM in caam.
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up.
- Add new SEV/SNP platform shutdown API in ccp.
-----BEGIN PGP SIGNATURE-----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=O8L5
-----END PGP SIGNATURE-----
Merge tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix memcpy_sglist to handle partially overlapping SG lists
- Use memcpy_sglist to replace null skcipher
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
- Hide CRYPTO_MANAGER
- Add delayed freeing of driver crypto_alg structures
Compression:
- Allocate large buffers on first use instead of initialisation in scomp
- Drop destination linearisation buffer in scomp
- Move scomp stream allocation into acomp
- Add acomp scatter-gather walker
- Remove request chaining
- Add optional async request allocation
Hashing:
- Remove request chaining
- Add optional async request allocation
- Move partial block handling into API
- Add ahash support to hmac
- Fix shash documentation to disallow usage in hard IRQs
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64
- Drop avx10_256 xts(aes)/ctr(aes) on x86
- Improve avx-512 optimisations for xts(aes)
- Move chacha arch implementations into lib/crypto
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm
- Disable powerpc/poly1305 as it has no SIMD fallback
- Move sha256 arch implementations into lib/crypto
- Convert deflate to acomp
- Set block size correctly in cbcmac
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss
- Fix warm-reboot failure by making shutdown do more work in qat
- Add locking in zynqmp-sha
- Remove cavium/zip
- Add support for PCI device 0x17D8 to ccp
- Add qat_6xxx support in qat
- Add support for RK3576 in rockchip-rng
- Add support for i.MX8QM in caam
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
- Add new SEV/SNP platform shutdown API in ccp"
* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
crypto: qat - add missing header inclusion
crypto: api - Redo lookup on EEXIST
Revert "crypto: testmgr - Add hash export format testing"
crypto: marvell/cesa - Do not chain submitted requests
crypto: powerpc/poly1305 - add depends on BROKEN for now
Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
crypto: ccp - Add missing tee info reg for teev2
crypto: ccp - Add missing bootloader info reg for pspv5
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
crypto: octeontx2 - Use dynamic allocated memory region for lmtst
crypto: octeontx2 - Initialize cptlfs device info once
crypto: xts - Only add ecb if it is not already there
crypto: lrw - Only add ecb if it is not already there
crypto: testmgr - Add hash export format testing
crypto: testmgr - Use ahash for generic tfm
crypto: hmac - Add ahash support
crypto: testmgr - Ignore EEXIST on shash allocation
crypto: algapi - Add driver template support to crypto_inst_setname
crypto: shash - Set reqsize in shash_alg
...
-Fix the comment describing the 'start' function, which was a cut/paste
mistake for a different function.
-The comment for DIRECT_REQ and DIRECT_RESP only mentioned AArch32
and listed 32-bit function IDs. Update to include 64-bit.
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Instead of pr_xxx() macro, use dev_xxx() to print log.
This patch changes some error log level to warn log level when
the tpm_crb_ffa secure partition doesn't support properly but
system can run without it.
(i.e) unsupport of direct message ABI or unsupported ABI version
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
For secure partition with multi service, tpm_ffa_crb can access tpm
service with direct message request v2 interface according to chapter 3.3,
TPM Service Command Response Buffer Interface Over FF-A specificationi v1.0 BET.
This patch reflects this spec to access tpm service over
FF-A direct message request v2 ABI.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The kmalloc failure message is just noise. Remove it and replace -EFAULT
with -ENOMEM as standard for out of memory allocation error returns.
Link: https://lore.kernel.org/linux-integrity/20250430083435.860146-1-colin.i.king@gmail.com/
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The tlckl driver does not create a platform device anymore. It was
recently changed to use a faux device instead. Therefore the sysfs path
has changed from /sys/devices/platform/telco_clock to
/sys/devices/faux/telco_clock.
Fixes: 72239a78f9 ("tlclk: convert to use faux_device")
Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com>
Link: https://lore.kernel.org/r/20250501200457.18506-1-nicolescu.roxana@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgqSbkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGr6sH/1ICAvlin1GuxffE
ISVNz3xhXQpXG2k8yl9r0umpdCfPQbGrxm30vZyuIDNutY/FuMvkIqfu+Z1NnLg0
GidZW015LtXrp7/puKtTnUD5CPSjdETMXig+Q7c1PrxkkmHwz8sBbbm173AIDbDB
t7wwqSEUQh2AIDouGwN+DXB+6bR2FoOXb/k/njmtappIwR3rBc2f1HQJnP095rKO
5AKw1c9DMv5Wq2cEdBOCP48e4CFZEIN1ycW0nvtjpnOmcPOJjLoEothRbntQolqF
udtj5UeTGdAJqmjigv7KHmlrmFNe+GqBq4+beHl5MRxhBaT2uGGaM9jCJiSxT3Jx
sHyYYr8=
=Ddma
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc7' into x86/core, to pick up fixes
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df77 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Fix Smatch-detected issue:
drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error:
uninitialized symbol 'value'.
Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(),
and tpm_buf_read_u32() to guard against uninitialized data in case of a
boundary overflow.
Add defensive initialization ensures the return values are always defined,
preventing undefined behavior if the unexpected happens.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Now that the ChaCha state matrix is strongly-typed, add a helper
function chacha_zeroize_state() which zeroizes it. Then convert all
applicable callers to use it instead of direct memzero_explicit. No
functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ChaCha state matrix is 16 32-bit words. Currently it is represented
in the code as a raw u32 array, or even just a pointer to u32. This
weak typing is error-prone. Instead, introduce struct chacha_state:
struct chacha_state {
u32 x[16];
};
Convert all ChaCha and HChaCha functions to use struct chacha_state.
No functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The _credit_init_bits() function directly accesses the ratelimit_state
structure's ->missed field, which works, but which also makes it
more difficult to change this field. Therefore, make use of the
ratelimit_state_get_miss() and ratelimit_state_inc_miss() functions
instead of directly accessing the ->missed field.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
"Jason A. Donenfeld" <Jason@zx2c4.com>
The "intf" list iterator is an invalid pointer if the correct
"intf->intf_num" is not found. Calling atomic_dec(&intf->nr_users) on
and invalid pointer will lead to memory corruption.
We don't really need to call atomic_dec() if we haven't called
atomic_add_return() so update the if (intf->in_shutdown) path as well.
Fixes: 8e76741c3d ("ipmi: Add a limit on the number of users that may use IPMI")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <aBjMZ8RYrOt6NOgi@stanley.mountain>
Signed-off-by: Corey Minyard <corey@minyard.net>
Don't have the other users that do things at panic time (the watchdog)
do all this themselves, provide a function to do it.
Also, with the new design where most stuff happens at thread context,
a few things needed to be fixed to avoid doing locking in a panic
context.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
It was possible for the SSIF thread to stop and quit before the
kthread_stop() call because ssif->stopping was set before the
stop. So only exit the SSIF thread is kthread_should_stop()
returns true.
There is no need to wake the thread, as the wait will be interrupted
by kthread_stop().
Signed-off-by: Corey Minyard <cminyard@mvista.com>
It is possible in some situations that IPMI devices won't get started up
properly. This change makes it so all non-duplicate devices will get
started up.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This makes sure any outstanding messages are returned to the user before
the interface is cleaned up.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The lower level interface shouldn't attempt to unregister if it has a
callback in the pending queue.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Messages already have a refcount for the user, so there's no need to
account for a new one.
As part of this, grab a refcount to the interface when processing
received messages. The messages can be freed there, cause the user
then the interface to be freed.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Now that SRCU is gone from IPMI, it can no longer be sloppy about
locking. Use the users mutex now when sending a message, not the big
ipmi_interfaces mutex, because it can result in a recursive lock. The
users mutex will work because the interface destroy code claims it after
setting the interface in shutdown mode.
Also, due to the same changes, rework the refcounting on users and
interfaces. Remove the refcount to an interface when the user is
freed, not when it is destroyed. If the interface is destroyed
while the user still exists, the user will still point to the
interface to test that it is valid if the user tries to do anything
but delete the user.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Now that the msghandler does all callbacks in user threads, there is
no need to have a lock any more, a mutex will work fine.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This simplifies the locking and lets us remove some weird event
handling code. deliver_response() and friends can now be called
from an atomic context.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Andy reported:
Debian clang version 19.1.7 is not happy when compiled with
`make W=1` (note, CONFIG_WERROR=y is the default):
ipmi_si_platform.c:268:15: error: cast to smaller integer type 'enum si_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
268 | io.si_type = (enum si_type)device_get_match_data(&pdev->dev);
The IPMI SI type is an enum that was cast into a pointer that was
then cast into an enum again. That's not the greatest style, so
instead create an info structure to hold the data and use that.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/lkml/20250415085156.446430-1-andriy.shevchenko@linux.intel.com/
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The Rockchip RK3576 SoC uses a new hardware random number generator IP.
It's also used on the Rockchip RK3562 and the Rockchip RK3528.
It has several modes of operation and self-checking features that are
not implemented here. For starters, it has a DRNG output, which is an
AES-CTR pseudo-random number generator that can be reseeded from the
true entropy regularly.
However, it also allows for access of the true entropy generator
directly. This entropy is generated from an oscillator.
There are several configuration registers which we don't touch here. The
oscillator can be switched between a "CRO" and "STR" oscillator, and the
length of the oscillator can be configured.
The hardware also supports some automatic continuous entropy quality
checking, which is also not implemented in this driver for the time
being.
The output as-is has been deemed sufficient to be useful:
rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 997
rngtest: FIPS 140-2 failures: 3
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 1
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 1
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=17.050; avg=1897.272;
max=19531250.000)Kibits/s
rngtest: FIPS tests speed: (min=44.773; avg=71.179; max=96.820)Mibits/s
rngtest: Program run time: 11760715 microseconds
rngtest: bits received from input: 40000032
rngtest: FIPS 140-2 successes: 1997
rngtest: FIPS 140-2 failures: 3
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 1
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 1
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=17.050; avg=1798.618;
max=19531250.000)Kibits/s
rngtest: FIPS tests speed: (min=44.773; avg=64.561; max=96.820)Mibits/s
rngtest: Program run time: 23507723 microseconds
Stretching the entropy can then be left up to Linux's actual entropy
pool.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge mainline to pick up bcachefs poly1305 patch 4bf4b5046d
("bcachefs: use library APIs for ChaCha20 and Poly1305"). This
is a prerequisite for removing the poly1305 shash algorithm.
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
17 years ago, Venki suggested [1] "A future improvement would be to
avoid the range_is_allowed duplication".
The only thing preventing a common implementation is that
phys_mem_access_prot_allowed() expects the range check to exit
immediately when PAT is disabled [2]. I.e. there is no cache conflict to
manage in that case. This cleanup was noticed on the path to
considering changing range_is_allowed() policy to blanket deny /dev/mem
for private (confidential computing) memory.
Note, however that phys_mem_access_prot_allowed() has long since stopped
being relevant for managing cache-type validation due to [3], and [4].
Commit 0124cecfc8 ("x86, PAT: disable /dev/mem mmap RAM with PAT") [1]
Commit 9e41bff270 ("x86: fix /dev/mem mmap breakage when PAT is disabled") [2]
Commit 1886297ce0 ("x86/mm/pat: Fix BUG_ON() in mmap_mem() on QEMU/i386") [3]
Commit 0c3c8a1836 ("x86, PAT: Remove duplicate memtype reserve in devmem mmap") [4]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250430024622.1134277-2-dan.j.williams%40intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgOrWseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFyIH/AhXcuA8y8rk43mo
t+0GO7JR4dnr4DIl74GgDjCXlXiKCT7EXMfD/ABdofTxV4Pbyv+pUODlg1E6eO9U
C1WWM5PPNBGDDEVSQ3Yu756nr0UoiFhvW0R6pVdou5cezCWAtIF9LTN8DEUgis0u
EUJD9+/cHAMzfkZwabjm/HNsa1SXv2X47MzYv/PdHKr0htEPcNHF4gqBrBRdACGy
FJtaCKhuPf6TcDNXOFi5IEWMXrugReRQmOvrXqVYGa7rfUFkZgsAzRY6n/rUN5Z9
FAgle4Vlv9ohVYj9bXX8b6wWgqiKRpoN+t0PpRd6G6ict1AFBobNGo8LH3tYIKqZ
b/dCGNg=
=xDGd
-----END PGP SIGNATURE-----
Merge 6.15-rc4 into char-misc-next
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small char/misc driver fixes to resolve reported problems
for 6.15-rc4. Included in here are:
- misc chrdev region range fix reported by many people
- nvmem driver fixes and dt updates
- mei new device id and fixes
- comedi driver fix
- pps driver fix
- binder debug log fix
- pci1xxxx driver fixes
- firmware driver fix
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaAuQlQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylrkQCgpZWWeKwuMlH4Lec6E16K3GXbuSAAn2Tr4MKM
D2xY4nHBgBi2d2Oj9C7P
=LJP6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes to resolve reported
problems for 6.15-rc4. Included in here are:
- misc chrdev region range fix reported by many people
- nvmem driver fixes and dt updates
- mei new device id and fixes
- comedi driver fix
- pps driver fix
- binder debug log fix
- pci1xxxx driver fixes
- firmware driver fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
firmware: stratix10-svc: Add of_platform_default_populate()
mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type
mei: vsc: Fix fortify-panic caused by invalid counted_by() use
pps: generators: tio: fix platform_set_drvdata()
mcb: fix a double free bug in chameleon_parse_gdd()
misc: microchip: pci1xxxx: Fix incorrect IRQ status handling during ack
misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registration
char: misc: register chrdev region with all possible minors
mei: me: add panther lake H DID
comedi: jr3_pci: Fix synchronous deletion of timer
binder: fix offset calculation in debug log
intel_th: avoid using deprecated page->mapping, index fields
dt-bindings: nvmem: Add compatible for MSM8960
dt-bindings: nvmem: Add compatible for IPQ5018
nvmem: qfprom: switch to 4-byte aligned reads
nvmem: core: update raw_len if the bit reading is required
nvmem: core: verify cell's raw_len
nvmem: core: fix bit offsets of more than one byte
dt-bindings: nvmem: fixed-cell: increase bits start value to 31
dt-bindings: nvmem: Add compatible for MS8937
...
When this was first reported [1], the possibility of having sufficient
number of dynamic misc devices was theoretical, in the case of dlm driver.
In practice, its userspace never created more than one device.
What we know from commit ab760791c0 ("char: misc: Increase the maximum
number of dynamic misc devices to 1048448"), is that the miscdevice
interface has been used for allocating more than the single-shot devices it
was designed for. And it is not only coresight_tmc, but many other drivers
are able to create multiple devices.
On systems like the ones described in the above commit, it is certain that
the dynamic allocation will allocate certain reserved minor numbers,
leading to failures when a later driver tries to claim its reserved number.
Instead of excluding the historically statically allocated range from
dynamic allocation, restrict the latter to minors above 255. That also
removes the need for DYNAMIC_MINORS and the convolution in allocating minor
numbers, simplifying the code.
Since commit ab760791c0 ("char: misc: Increase the maximum number of
dynamic misc devices to 1048448") has been applied, such range is already
possible. And given such devices already need to be dynamically created,
there should be no systems where this might become a problem.
[1] https://lore.kernel.org/all/1257813017-28598-3-git-send-email-cascardo@holoscopio.com/
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250423-misc-dynrange-v4-1-133b5ae4ca18@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to section 5.3.6.2 (Multiport Device Operation) of the virtio
spec(version 1.2) a control buffer with the event VIRTIO_CONSOLE_RESIZE
is followed by a virtio_console_resize struct containing cols then rows.
The kernel implements this the wrong way around (rows then cols) resulting
in the two values being swapped.
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Message-Id: <20250324144300.905535-1-maxbr@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per virtio spec the fields cols and rows are specified as little
endian. Although there is no legacy interface requirement that would
state that cols and rows need to be handled as native endian when legacy
interface is used, unlike for the fields of the adjacent struct
virtio_console_control, I decided to err on the side of caution based
on some non-conclusive virtio spec repo archaeology and opt for using
virtio16_to_cpu() much like for virtio_console_control.event. Strictly
by the letter of the spec virtio_le_to_cpu() would have been sufficient.
But when the legacy interface is not used, it boils down to the same.
And when using the legacy interface, the device formatting these as
little endian when the guest is big endian would surprise me more than
it using guest native byte order (which would make it compatible with
the current implementation). Nevertheless somebody trying to implement
the spec following it to the letter could end up forcing little endian
byte order when the legacy interface is in use. So IMHO this ultimately
needs a judgement call by the maintainers.
Fixes: 8345adbf96 ("virtio: console: Accept console size along with resize control message")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org # v2.6.35+
Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The driver_version variable is only used inside of an #ifdef block, which
leads to a W=1 warning:
drivers/char/apm-emulation.c:144:19: error: 'driver_version' defined but not used [-Werror=unused-const-variable=]
Move this into the function using it.
Fixes: 7726942fb1 ("[APM] Add shared version of APM emulation")
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250409122314.2848028-9-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use to_delayed_work() instead of open-coding it.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20250414074559.3954142-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a struct device pointer field to the device's context struct. This
makes using the unsigned long priv pointer in struct hwrng unnecessary, so
remove that one as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a struct device pointer field to the device's context struct. This
makes using the unsigned long priv pointer in struct hwrng unnecessary, so
remove that one as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a struct device pointer field to the device's context struct. This
makes using the unsigned long priv pointer in struct hwrng unnecessary, so
remove that one as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
register_chrdev will only register the first 256 minors of a major chrdev.
That means that dynamically allocated misc devices with minor above 255
will fail to open with -ENXIO.
This was found by kernel test robot when testing a different change that
makes all dynamically allocated minors be above 255. This has, however,
been separately tested by creating 256 serio_raw devices with the help of
userio driver.
Ever since allowing misc devices with minors above 128, this has been
possible.
Fix it by registering all minor numbers from 0 to MINORMASK + 1 for
MISC_MAJOR.
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/oe-lkp/202503171507.6c8093d0-lkp@intel.com
Fixes: ab760791c0 ("char: misc: Increase the maximum number of dynamic misc devices to 1048448")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Tested-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/20250317-misc-chrdev-v1-1-6cd05da11aef@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmf5ExAACgkQ+mJfZA7r
E8rS+Qf/WVswQAzNmDQxSBYvZJl7PFzk0zgrTTixwz8ePDezcnEE/+7VsMuQ3ZY+
k/7uve2WApoRAh8Z4+rpxHu/x3F4fI8oWXXt9Ug7f0OwVlKz4cgE5ax04m+90wqu
j7N5NZcGwMUEPR192GZqALxzSaWsRhPH0p8A32f9PU/Tq1+UTSEwwaMKDIRdmtiR
VHU8rS694tuXXuGoHiHOPMYDacxyQE7XRyTqaBaBvMQrjgbc+ZqcdG+b+Mnp3t6N
GIs4CkT6UkDEpnovA66FSiBWLBkrnNFfnyO5WEUbR13CB459XpwB0as8o2HW85oT
Q6Nui8w3ZeaGUi6U764fNm/FxFh4vw==
=3VwH
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-04-11' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-subsystem Changes:
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/Z_kTqPX5Mjruq1pL@intel.com
Add driver for the vTPM defined by the AMD SVSM spec [1].
The specification defines a protocol that a SEV-SNP guest OS can use to
discover and talk to a vTPM emulated by the Secure VM Service Module (SVSM) in
the guest context, but at a more privileged level (VMPL0).
The new tpm-svsm platform driver uses API exposed by the x86/sev core
implementation interface to a SVSM to send commands and receive responses.
The device cannot be hot-plugged/unplugged as it is emulated by the platform,
so module_platform_driver_probe() can be used. The device will be registered
by the platform only when it's available, so the probe function just needs to
setup the tpm_chip.
This device does not support interrupts and sends responses to commands
synchronously.
In order to have .recv() called just after .send() in tpm_try_transmit(), the
.status() callback is not implemented as recently supported by commit
980a573621 ("tpm: Make chip->{status,cancel,req_canceled} opt").
[1] "Secure VM Service Module for SEV-SNP Guests"
Publication # 58019 Revision: 1.00
[ bp: Massage commit message. ]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250410135118.133240-4-sgarzare@redhat.com
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
i915 wants to read out the PTE(s) populated by the BIOS/GOP
to verify that the framebuffer is in the correct location.
Introduce intel_gmch_gtt_read_entry() that reads out the
PTE and decodes it to a somewhat abstract form. For now
we just return the dma_addr, present bit, and local memory
bit. I didn't bother with the snoop bit/etc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform bus
interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mNdQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylktACfYJix41jCCDbiFjnu7Hz4OIdcrUsAnRyF164M
1n5MhEhsEmvQj7WBwQLE
=AmmW
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
tpm_ftpm_tee does not require chip->status, chip->cancel and
chip->req_canceled. Make them optional.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lazy flushing of TPM auth sessions can interact badly with IMA + kexec,
resulting in loaded session handles being leaked across the kexec and
not cleaned up. Fix by ensuring any active auth session is ended before
the TPM is told about the shutdown, matching what is done when
suspending.
Before:
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~# kexec --load --kexec-file-syscall …
root@debian-qemu-efi:~# systemctl kexec
…
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
- 0x2000000
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#
(repeat kexec steps)
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
- 0x2000000
- 0x2000001
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#
After:
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~# kexec --load --kexec-file-syscall …
root@debian-qemu-efi:~# systemctl kexec
…
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The TCG ACPI spec v1.4 defines a start method for the TPMs implemented with
the ARM CRB over FF-A ABI.
Add support for the FF-A start method, and use interfaces provided by the
ffa_crb driver to interact with the FF-A based TPM.
[jarkko: Fine-tuned the commit message.]
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Refactor TPM idle check to tpm_crb_has_idle(), and reduce paraentheses
usage in start method checks
[jarkko: Fine-tuned the commit message.]
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The ARM specification TPM Service CRB over FF-A specification defines the
FF-A messages to interact with a CRB-based TPM implemented as an FF-A
secure partition.
See: https://developer.arm.com/documentation/den0138/latest/
This driver is probed when a TPM Secure Partition is discovered by the FF-A
subsystem. It exposes APIs used by the TPM CRB driver to send notifications
to the TPM.
[jarkko: Fine-tuned the commit message.]
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The `state` member in `struct ftpm_tee_private` is in the documentation,
but it has never been in the implementation since the commit 09e574831b
("tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE") that
introduced it.
Remove it to have a match between documentation and implementation.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.
This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.
Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:
https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go
It can take several hours to reproduce, and several million operations.
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The change to only use interrupts to handle supported status changes
introduced an issue when it is necessary to poll for the status. Rather
than checking for the status after sleeping the code now sleeps after
the check. This means a correct, but slower, status change on the part
of the TPM can be missed, resulting in a spurious timeout error,
especially on a more loaded system. Switch back to sleeping *then*
checking. An up front check of the status has been done at the start of
the function, so this does not cause an additional delay when the status
is already what we're looking for.
Cc: stable@vger.kernel.org # v6.4+
Fixes: e87fcf0dc2 ("tpm, tpm_tis: Only handle supported interrupts")
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
TPM2 sessions have been flushed lazily since commit df745e2509 ("tpm:
Lazily flush the auth session"). If /dev/tpm{rm}0 is not accessed
in-between two in-kernel calls, it is possible that a TPM2 session is
re-started before the previous one has been completed.
This causes a spurios warning in a legit run-time condition, which is also
correctly addressed with a fast return path:
[ 2.944047] tpm tpm0: auth session is active
Address the issue by changing dev_warn_once() call to a dev_dbg_once()
call.
[jarkko: Rewrote the commit message, and instead of dropping converted
to a debug message.]
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lazy flushing of TPM auth sessions was introduced to speed up IMA
measurments into the TPM. Make use of it in tpm2_get_random as well,
which has the added benefit of not needlessly cleaning up the session
that IMA is using when there are no userspace accesses taking place.
Command trace before for every call:
hwrng (0x00000161): 14 (52965242 ns)
hwrng (0x00000176): 48 (161612432 ns)
hwrng (0x00000165): 10 (2410494 ns)
hwrng (0x0000017B): 117 (70699883 ns)
hwrng (0x0000017B): 117 (70959666 ns)
hwrng (0x00000165): 10 (2756827 ns)
After, with repeated calls showing no setup:
hwrng (0x00000161): 14 (53044582 ns)
hwrng (0x00000176): 48 (160491333 ns)
hwrng (0x00000165): 10 (2408220 ns)
hwrng (0x0000017B): 117 (70695037 ns)
hwrng (0x0000017B): 117 (70994984 ns)
hwrng (0x0000017B): 117 (70195388 ns)
hwrng (0x0000017B): 117 (70973835 ns)
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Building with W=1 shows a warning about of_ftpm_tee_ids being unused when
CONFIG_OF is disabled:
drivers/char/tpm/tpm_ftpm_tee.c:356:34: error: unused variable 'of_ftpm_tee_ids' [-Werror,-Wunused-const-variable]
Drop the unnecessary of_match_ptr().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sumit Garg <sumit.garg@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Highlights:
- alienware-wmi: Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities: Support for mic & audio mute LEDs
- samsung-galaxybook: Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl: RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
alienware-wmi:
- Add a state container for LED control feature
- Add a state container for thermal control methods
- Add alienware-wmi.h
- Add WMI Drivers
- Refactor hdmi, amplifier, deepslp methods
- Refactor LED control methods
- Refactor thermal control methods
- Rename alienware-wmi.c
- Split DMI table
- Split the alienware-wmi driver
- Update alienware-wmi config entries
- Update header and module information
amd/pmc:
- fix leak in probe()
- Move macros and structures to the PMC header file
- Notify user when platform does not support s0ix transition
- Remove unnecessary line breaks
- Use managed APIs for mutex
amd/pmf:
- convert timeouts to secs_to_jiffies()
amd:
- Use *-y instead of *-objs in Makefiles
arm64:
- add Huawei Matebook E Go EC driver
arm64: dts: qcom: gaokun3:
- Add Embedded Controller node
compal-laptop:
- Do not include <linux/fb.h>
dell-ddv:
- Fix temperature calculation
- Use devm_battery_hook_register
- Use the power supply extension mechanism
dell: dell-wmi-sysman:
- Use *-y instead of *-objs in Makefile
dell:
- Modify Makefile alignment
- Use *-y instead of *-objs in Makefile
dell-uart-backlight:
- Make dell_uart_bl_serdev_driver static
dt-bindings: platform:
- Add Huawei Matebook E Go EC
hp-bioscfg:
- Replace deprecated strncpy() with strscpy()
- Use wmi_instance_count()
hp:
- Use *-y instead of *-objs in Makefile
hwmon:
- (hp-wmi-sensors) Use the WMI bus API when accessing sensors
ideapad-laptop:
- use dev_groups to register attribute groups
int3472:
- Call "func" "con_id" instead
intel/pmc:
- Add Arrow Lake U/H support to intel_pmc_core driver
- Add Panther Lake support to intel_pmc_core
- Create generic_core_init() for all platforms
- Make tgl_core_generic_init() static
- Move arch specific action to init function
- Remove duplicate enum
- Remove simple init functions
- Remove unnecessary declarations in header
- Remove unneeded extern keyword in header
intel:
- Use *-y instead of *-objs in Makefile
irqdomain: platform/x86:
- Switch to irq_domain_create_linear()
lenovo-wmi-hotkey-utilities.c:
- Support for mic and audio mute LEDs
lenovo-yoga-tab2-pro-1380-fastcharger:
- Make symbol static
MAINTAINERS:
- Add documentation reference for Mellanox platform
- Update ALIENWARE WMI DRIVER entry
mellanox:
- Relocate mlx-platform driver
mlxbf-bootctl:
- Support sysfs entries for RTC battery status
mlx-platform:
- Change register name
- Cosmetic changes
samsung-galaxybook:
- Add samsung-galaxybook driver
- Fix block_recording not supported logic
sonypi:
- Use str_on_off() helper in sonypi_display_info()
think-lmi:
- Use ACPI object when extracting strings
- Use WMI bus API when accessing BIOS settings
thinkpad_acpi:
- check the return value of devm_mutex_init()
- convert timeouts to secs_to_jiffies()
- Do not include <linux/fb.h>
- Move HWMON initialization to tpacpi_hwmon_pdriver's probe
- Move subdriver initialization to tpacpi_pdriver's probe.
tools/power/x86/intel-speed-select:
- Die ID for IO dies
- Fix the condition to check multi die system
- Prefix header search path with sysroot
- Prevent increasing MAX_DIE_PER_PACKAGE
- v1.22 release
wmi:
- Call WCxx methods when setting data blocks
- Rework WCxx/WExx ACPI method handling
- Update documentation regarding the GUID-based API
- Use devres to disable the WMI device
x86-android-tablets:
- Add select POWER_SUPPLY to Kconfig
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ+QJyQAKCRBZrE9hU+XO
MUPYAP4sjtB8DKTIHgiQqado7PJZmdgpeJfAplitwKGe4BOcEQEA1mhuqMA5n6S+
jvbTtRF+jiKxis/5zAtAdChScM/pIgo=
=W+gy
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance effort
and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts and
implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system timekeeping
accessors, which was good enough at the time when it was designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related to
system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
-----BEGIN PGP SIGNATURE-----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=rwei
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmff5jQTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoVvRD/wKtuwmiA66NJFgXC0qVq82A6fO3bY8
GBdbfysDJIbqGu5PTcULTbJ8qkqv3jeLUv6CcXvS4sZ7y/uJQl2lzf8yrD/0bbwc
rLI6sHiPSZmK93kNVN4X5H7kvt7cE/DYC9nnEOgK3BY5FgKc4n9887d4aVBhL8Lv
ODwVXvZ+xi351YCj7qRyPU24zt/p4tkkT1o2k4a0HBluqLI0D+V20fke9IERUL8r
d1uWKlcn0TqYDesE8HXKIhbst3gx52rMJrXBJDHwFmG6v8Pj1fkTXCVpPo8QcBz8
OTVkpomN9f/Tx4+GZwhZOF86LhLL3OhxD6pT7JhFCXdmSGv+Ez8uyk1YZysM/XpV
Juy/1yAcBpDIDkmhMFGdAAn48Nn9Fotty0r4je60zSEp1d/4QMXcFme29qr2JTUE
iWnQ/HD6DxUjVHqy7CYvvo26Xegg1C7qgyOVt4PYZwAM1VKF5P3kzYTb4SAdxtop
Tpji1sfW9QV08jqMNo6XntD32DSP9S2HqjO9LwBw700jnx2jjJ35fcJs6iodMOUn
gckIZLMn3L0OoglPdyA5O7SNTbKE7aFiRKdnT/cJtR3Fa39Qu27CwC5gfiyuie9I
Q+LG8GLuYSBHXAR+PBK4GWlzJ7Dn8k3eqmbnLeKpRMsU6ZzcttgA64xhaviN2wN0
iJbvLJeisXr3GA==
=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
The tlclk driver does not need to create a platform device, it only did
so because it was simple to do that in order to get a place in sysfs to
hang some device-specific attributes. Change it over to use the faux
device instead as this is NOT a real platform device, and it makes the
code even smaller than before.
Cc: Mark Gross <markgross@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/2025021028-askew-smashing-4ff9@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long, and should be merged for 6.14-rc6.
They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ83Szw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykt1wCeMzZF9wk1OSGvUA1rZk86FFPHQd4AniYEv4Ze
/FY8PmjKxqkQhJIKCKS4
=7Jpe
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
The fix to atomically read the pipe head and tail state when not holding
the pipe mutex has caused a number of headaches due to the size change
of the involved types.
It turns out that we don't have _that_ many places that access these
fields directly and were affected, but we have more than we strictly
should have, because our low-level helper functions have been designed
to have intimate knowledge of how the pipes work.
And as a result, that random noise of direct 'pipe->head' and
'pipe->tail' accesses makes it harder to pinpoint any actual potential
problem spots remaining.
For example, we didn't have a "is the pipe full" helper function, but
instead had a "given these pipe buffer indexes and this pipe size, is
the pipe full". That's because some low-level pipe code does actually
want that much more complicated interface.
But most other places literally just want a "is the pipe full" helper,
and not having it meant that those places ended up being unnecessarily
much too aware of this all.
It would have been much better if only the very core pipe code that
cared had been the one aware of this all.
So let's fix it - better late than never. This just introduces the
trivial wrappers for "is this pipe full or empty" and to get how many
pipe buffers are used, so that instead of writing
if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
the places that literally just want to know if a pipe is full can just
say
if (pipe_is_full(pipe))
instead. The existing trivial cases were converted with a 'sed' script.
This cuts down on the places that access pipe->head and pipe->tail
directly outside of the pipe code (and core splice code) quite a lot.
The splice code in particular still revels in doing the direct low-level
accesses, and the fuse fuse_dev_splice_write() code also seems a bit
unnecessarily eager to go very low-level, but it's at least a bit better
than it used to be.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the indentation of the help text of the HW_RANDOM_CN10K symbol
from one TAB plus one space to one TAB plus two spaces, as is customary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The RK3588 SoC includes several TRNGs, one part of the Crypto IP block,
and the other one (referred to as "trngv1") as a standalone new IP.
Add support for this new standalone TRNG to the driver by both
generalising it to support multiple different rockchip RNGs and then
implementing the required functionality for the new hardware.
This work was partly based on the downstream vendor driver by Rockchip's
Lin Jinhan, which is why they are listed as a Co-author.
While the hardware does support notifying the CPU with an IRQ when the
random data is ready, I've discovered while implementing the code to use
this interrupt that this results in significantly slower throughput of
the TRNG even when under heavy CPU load. I assume this is because with
only 32 bytes of data per invocation, the overhead of reinitialising a
completion, enabling the interrupt, sleeping and then triggering the
completion in the IRQ handler is way more expensive than busylooping.
Speaking of busylooping, the poll interval for reading the ISTAT is an
atomic read with a delay of 0. In my testing, I've found that this gives
us the largest throughput, and it appears the random data is ready
pretty much the moment we begin polling, as increasing the poll delay
leads to a drop in throughput significant enough to not just be due to
the poll interval missing the ideal timing by a microsecond or two.
According to downstream, the IP should take 1024 clock cycles to
generate 56 bits of random data, which at 150MHz should work out to
6.8us. I did not test whether the data really does take 256/56*6.8us
to arrive, though changing the readl to a __raw_readl makes no
difference in throughput, and this data does pass the rngtest FIPS
checks, so I'm not entirely sure what's going on but I presume it's got
something to do with the AHB bus speed and the memory barriers that
mainline's readl/writel functions insert.
The only other current SoC that uses this new IP is the Rockchip RV1106,
but that SoC does not have mainline support as of the time of writing,
so we make no effort to declare it as supported for now.
Co-developed-by: Lin Jinhan <troy.lin@rock-chips.com>
Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Despite assigning a temporary variable the value of &pdev->dev early on
in the probe function, the probe function then continues to use this
construct when it could just use the local dev variable instead.
Simplify this by using the local dev variable directly.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The rockchip rng driver does a dance to store the dev pointer in the
hwrng's unsigned long "priv" member. However, since the struct hwrng
member of rk_rng is not a pointer, we can use container_of to get the
struct rk_rng instance from just the struct hwrng*, which means we don't
have to subvert what little there is in C of a type system and can
instead store a pointer to the device struct in the rk_rng itself.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend the generic vDSO data storage with a page for the random state data.
The random state data is stored in a dedicated page, as the existing
storage page is only meant for time-related, time-namespace-aware data.
This simplifies to access logic to not need to handle time namespaces
anymore and also frees up more space in the time-related page.
In case further generic vDSO data store is required it can be added to
the random state page.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-6-13a4669dfc8c@linutronix.de
When compiling a kernel with GCC using `make W=1` with CONFIG_WERROR=y
(which is default nowadays), the build fails:
drivers/char/virtio_console.c:1427:9: note: ‘snprintf’ output between 9 and 27 bytes into a destination of size 16
Indeed, GCC can't see the limits of the variables that are in use.
Fix this by using dev_name() of the newly created device that is
luckily the same as the string used for the DebugFS node name.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Link: https://lore.kernel.org/r/20250210095946.4122771-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Amit Shah <amit@kernel.org>
Link: https://lore.kernel.org/r/20250212114841.74650-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When creating sysfs files fail, the allocated minor must be freed such that
it can be later reused. That is specially harmful for static minor numbers,
since those would always fail to register later on.
Fixes: 6d04d2b554 ("misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors")
Cc: stable <stable@kernel.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250123123249.4081674-5-cascardo@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/010640f1668d40894a1721037c56f7a684dbcc5f.1738746821.git.namcao@linutronix.de
Remove hard-coded strings by using the str_on_off() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250210123103.112938-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add runtime power management to the imx-rngc driver. Disable the
peripheral clock when the rngc is idle.
The callback functions from struct hwrng wake the rngc up when they're
called and set it to idle on exit. Helper functions which are invoked
from the callbacks assume that the rngc is active.
Device init and probe are done before runtime pm is enabled. The
peripheral clock will be handled manually during these steps. Do not use
devres any more to enable/disable the peripheral clock, this conflicts
with runtime pm.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It's pretty usual to have "tristate" descriptions in Kconfig files placed
immediately after the actual configuration options, so correct the position
of one misplaced "tristate" spotted in the hw_random Kconfig file.
No intended functional changes are introduced by this trivial cleanup.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace instances of leading size-eight groups of space characters with
the usual tab characters, as spotted in the hw_random Kconfig file.
No intended functional changes are introduced by this trivial cleanup.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25c ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5fGOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynatACeLlbkhUT544Va1eOL2TkjfcGxrZUAoJ3ymGC0
y0N7/+fWL6aS+b4sEilv
=TU0D
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO driver updates from Greg KH:
"Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
ntsync: Fix reference leaks in the remaining create ioctls.
spmi: hisi-spmi-controller: Drop duplicated OF node assignment in spmi_controller_probe()
spmi: Set fwnode for spmi devices
ntsync: fix a file reference leak in drivers/misc/ntsync.c
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
memstick: core: fix kernel-doc notation
intel_th: core: fix kernel-doc warnings
binder: log transaction code on failure
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
misc: fastrpc: Fix copy buffer page size
misc: fastrpc: Fix registered buffer page address
misc: fastrpc: Deregister device nodes properly in error scenarios
nvmem: core: improve range check for nvmem_cell_write()
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
...
I'm switching to a new email address, so update that. This is a new
commit, but shouldn't be an issue.
Minor fixes for formats and return values and missing ifdefs.
A fix for some error handling that causes a loss of messages.
-----BEGIN PGP SIGNATURE-----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=DhcZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.14-1' of https://github.com/cminyard/linux-ipmi
Pull ipmi updates from Corey Minyard:
- I'm switching to a new email address, so update that
- Minor fixes for formats and return values and missing ifdefs
- A fix for some error handling that causes a loss of messages
* tag 'for-linus-6.14-1' of https://github.com/cminyard/linux-ipmi:
MAINTAINERS: ipmi: update my email address
ipmi: ssif_bmc: Fix new request loss when bmc ready for a response
ipmi: make ipmi_destroy_user() return void
char:ipmi: Fix a not-used variable on a non-ACPI system
char:ipmi: Fix the wrong format specifier
ipmi: ipmb: Add check devm_kasprintf() returned value
kmap_atomic() is deprecated and should be replaced with kmap_local_page()
[1][2]. kmap_local_page() is faster in kernels with HIGHMEM enabled, can
take page faults, and allows preemption.
According to [2], this replacement is safe as long as the code between
kmap_atomic() and kunmap_atomic() does not implicitly depend on disabling
page faults or preemption. In this patch, the only thing happening between
mapping and unmapping the page is a memcpy, and I don't suspect it depends
on disabling page faults or preemption.
[1] https://lwn.net/Articles/836144/
[2] https://docs.kernel.org/mm/highmem.html#temporary-virtual-mappings
Signed-off-by: David Reaver <me@davidreaver.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Link: https://lore.kernel.org/r/20250109035904.168345-1-me@davidreaver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc_minor_alloc was allocating id using ida for minor only in case of
MISC_DYNAMIC_MINOR but misc_minor_free was always freeing ids
using ida_free causing a mismatch and following warn:
> > WARNING: CPU: 0 PID: 159 at lib/idr.c:525 ida_free+0x3e0/0x41f
> > ida_free called for id=127 which is not allocated.
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
...
> > [<60941eb4>] ida_free+0x3e0/0x41f
> > [<605ac993>] misc_minor_free+0x3e/0xbc
> > [<605acb82>] misc_deregister+0x171/0x1b3
misc_minor_alloc is changed to allocate id from ida for all minors
falling in the range of dynamic/ misc dynamic minors
Fixes: ab760791c0 ("char: misc: Increase the maximum number of dynamic misc devices to 1048448")
Signed-off-by: Vimal Agrawal <vimal.agrawal@sophos.com>
Reviewed-by: Dirk VanDerMerwe <dirk.vandermerwe@sophos.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241021133812.23703-1-vimal.agrawal@sophos.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cosmo found that when there is a new request comes in while BMC is
ready for a response, the complete_response(), which is called to
complete the pending response, would accidentally clear out that new
request and force ssif_bmc to move back to abort state again.
This commit is to address that issue.
Fixes: dd2bc5cc9e ("ipmi: ssif_bmc: Add SSIF BMC driver")
Reported-by: Cosmo Chou <chou.cosmo@gmail.com>
Closes: https://lore.kernel.org/lkml/20250101165431.2113407-1-chou.cosmo@gmail.com/
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Message-ID: <20250107034734.1842247-1-quan@os.amperecomputing.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Return value of ipmi_destroy_user() has no meaning, because it's always
zero and callers can do nothing with it. And in most cases it's not
checked. So make this function return void. This also will eliminate static
code analyzer warnings such as unreachable code/redundant comparison when
the return value is checked against non-zero value.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Message-ID: <20241225014532.20091-1-v.shevtsov@maxima.ru>
Signed-off-by: Corey Minyard <corey@minyard.net>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
The PPC64 specific MMIO setup open codes DT address functions rather
than using standard address parsing functions. The open-coded version
fails to handle any address translation and is not endian safe.
I haven't found any evidence of what platform used this. The only thing
that turned up was a PPC405 platform, but that is 32-bit and PPC405
support is being removed as well. CONFIG_TCG_ATMEL is not enabled for
any powerpc config and never was. The support was added in 2005 and
hasn't been touched since.
Rather than try to modernize and fix this code, just remove it.
[jarkko: fixed couple of style issues reported by checkpatch.pl --strict
and put offset into parentheses in the macro declarations.]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Accept another DID:VID for the next generation Google TPM. This TPM
has the same Ti50 firmware and fulfills the same interface.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Move i2c locking primitives to request_locality and relinquish_locality
callbacks, what effectively blocks TPM bus for the whole duration of
logical TPM operation.
With this in place, cr50-equipped TPM may be shared with external CPUs -
assuming that underneath i2c controller driver is aware of this setup
(see i2c-designware-amdpsp as an example).
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Instead of using static functions tpm_cr50_request_locality and
tpm_cr50_release_locality register callbacks from tpm class chip->ops
created for this purpose.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Grzegorz Bernacki <bernacki@chromium.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Set the TPM_OPS_AUTO_STARTUP on the driver so that the ibmvtpm driver now
uses tpm2_auto_startup and tpm1_auto_startup like many other drivers do.
Remove tpm_get_timeouts, tpm2_get_cc_attrs_tbl, and tpm2_sessions_init
calls from it since these will all be called in tpm2_auto_startup and
tpm1_auto_startup.
The exporting of the tpm2_session_init symbol was only necessary while the
ibmvtpm driver was calling this function. Since this is not the case
anymore, remove this symbol from being exported.
What is new for the ibmvtpm driver is that now tpm2_do_selftest and
tpm1_do_selftest will be called that send commands to the TPM to perform
or continue its selftest. However, the firmware should already have sent
these commands so that the TPM will not do much work at this time.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
- Tree wide:
* Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
- Core code:
* Prevent freeing an interrupt in the devres code which is not managed
by devres in the first place.
* Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
* Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which checks
whether ksoftirqd should be woken up. The latter is a pointless
exercise as both soft interrupts are raised in the context of the
timer interrupt and therefore never wake up ksoftirqd.
* Delegate timer/hrtimer soft interrupt processing to a dedicated thread
on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
- Drivers:
* New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
* Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU cluster
has its own GIC (Generic Interrupt Controller). This requires to
access the GIC of a remote cluster through a redirect register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC details.
* Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
* Small cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7ggcTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoaf7D/9G6FgJXx/60zqnpnOr9Yx0hxjaI47x
PFyCd3P05qyVMBYXfI99vrSKuVdMZXJ/fH5L83y+sOaTASyLTzg37igZycIDJzLI
FnHh/m/+UA8k2aIC5VUiNAjne2RLaTZiRN15uEHFVjByC5Y+YTlCNUE4BBhg5RfQ
hKmskeffWdtui3ou13CSNvbFn+pmqi4g6n1ysUuLhiwM2E5b1rZMprcCOnun/cGP
IdUQsODNWTTv9eqPJez985M6A1x2SCGNv7Z73h58B9N0pBRPEC1xnhUnCJ1sA0cJ
pnfde2C1lztEjYbwDngy0wgq0P6LINjQ5Ma2YY2F2hTMsXGJxGPDZm24/u5uR46x
N/gsOQMXqw6f5yvbiS7Asx9WzR6ry8rJl70QRgTyozz7xxJTaiNm2HqVFe2wc+et
Q/BzaKdhmUJj1GMZmqD2rrgwYeDcb4wWYNtwjM4PVHHxYlJVq0mEF1kLLS8YDyjf
HuGPVqtSkt3E0+Br3FKcv5ltUQP8clXbudc6L1u98YBfNK12hW8L+c3YSvIiFoYM
ZOAeANPM7VtQbP2Jg2q81Dd3CShImt5jqL2um+l8g7+mUE7l9gyuO/w/a5dQ57+b
kx7mHHIW2zCeHrkZZbRUYzI2BJfMCCOVN4Ax5OZxTLnLsL9VEehy8NM8QYT4TS8R
XmTOYW3U9XR3gw==
=JqxC
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
- Fix _CPC register setting issue for registers located in memory in
the ACPI CPPC library code (Lifeng Zheng).
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it use
devm_ for initializing mutexes and allocating driver data, and make
it check the register_pm_notifier() return value (Thomas Weißschuh,
Andy Shevchenko).
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann).
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King).
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann).
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede).
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose).
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König).
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim).
-----BEGIN PGP SIGNATURE-----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=ejtE
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include a couple of fixes, a new ACPI backlight quirk for Apple
MacbookPro11,2 and Air7,2 and a bunch of cleanups:
- Fix _CPC register setting issue for registers located in memory in
the ACPI CPPC library code (Lifeng Zheng)
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it
use devm_ for initializing mutexes and allocating driver data, and
make it check the register_pm_notifier() return value (Thomas
Weißschuh, Andy Shevchenko)
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann)
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King)
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann)
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede)
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose)
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König)
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim)"
* tag 'acpi-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
ACPI: video: force native for Apple MacbookPro11,2 and Air7,2
ACPI: CPPC: Fix _CPC register setting issue
ACPI: Switch back to struct platform_driver::remove()
ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Make UART skip quirks work on PCI UARTs without an UID
ACPI: allow building without CONFIG_HAS_IOPORT
ACPI: processor_perflib: extend X86 dependency
ACPI: scan: Use strscpy() instead of strcpy()
ACPI: SBSHC: Use strscpy() instead of strcpy()
ACPI: SBS: Use strscpy() instead of strcpy()
ACPI: power: Use strscpy() instead of strcpy()
ACPI: pci_root: Use strscpy() instead of strcpy()
ACPI: pci_link: Use strscpy() instead of strcpy()
ACPI: event: Use strscpy() instead of strcpy()
ACPI: EC: Use strscpy() instead of strcpy()
ACPI: APD: Use strscpy() instead of strcpy()
ACPI: thermal: Use strscpy() instead of strcpy()
ACPI: battery: Check for error code from devm_mutex_init() call
ACPI: EC: make EC support compile-time conditional
ACPI: pfr_telemetry: remove redundant error check on ret
...
API:
- Add sig driver API.
- Remove signing/verification from akcipher API.
- Move crypto_simd_disabled_for_test to lib/crypto.
- Add WARN_ON for return values from driver that indicates memory corruption.
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API.
- Optimise crc32c code size on x86.
- Optimise crct10dif on arm/arm64.
- Optimise p10-aes-gcm on powerpc.
- Optimise aegis128 on x86.
- Output full sample from test interface in jitter RNG.
- Retry without padata when it fails in pcrypt.
Drivers:
- Add support for Airoha EN7581 TRNG.
- Add support for STM32MP25x platforms in stm32.
- Enable iproc-r200 RNG driver on BCMBCA.
- Add Broadcom BCM74110 RNG driver.
-----BEGIN PGP SIGNATURE-----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=T8pa
-----END PGP SIGNATURE-----
Merge tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
Merge updates of the ACPI battery and EC drivers, an ACPI Platform
Firmware Runtime (PFR) telemetry driver update and an ACPI OS support
layer change for 6.13-rc1:
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it use
devm_ for initializing mutexes and allocating driver data, and make
it check the register_pm_notifier() return value (Thomas Weißschuh,
Andy Shevchenko).
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann).
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King).
* acpi-battery:
ACPI: battery: Check for error code from devm_mutex_init() call
ACPI: battery: use DEFINE_SIMPLE_DEV_PM_OPS
ACPI: battery: initialize mutexes through devm_ APIs
ACPI: battery: allocate driver data through devm_ APIs
ACPI: battery: check result of register_pm_notifier()
* acpi-ec:
ACPI: EC: make EC support compile-time conditional
* acpi-pfr:
ACPI: pfr_telemetry: remove redundant error check on ret
* acpi-osl:
ACPI: allow building without CONFIG_HAS_IOPORT
Commit 62f8f307c8 ("powerpc/64: Remove maple platform") removes the
PPC_MAPLE config as a consequence of the platform’s removal.
The config definition of HW_RANDOM_AMD refers to this removed config option
in its dependencies.
Remove the reference to the removed config option.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The earlier bug fix misplaced the error-label when dealing with the
tpm2_create_primary() return value, which the original completely ignored.
Cc: stable@vger.kernel.org
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1087331
Fixes: cc7d859434 ("tpm: Rollback tpm2_load_null()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The initial HMAC session feature added TPM bus encryption and/or integrity
protection to various in-kernel TPM operations. This can cause performance
bottlenecks with IMA, as it heavily utilizes PCR extend operations.
In order to mitigate this performance issue, introduce a kernel
command-line parameter to the TPM driver for disabling the integrity
protection for PCR extend operations (i.e. TPM2_PCR_Extend).
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/linux-integrity/20241015193916.59964-1-zohar@linux.ibm.com/
Fixes: 6519fea6fd ("tpm: add hmac checks to tpm2_pcr_extend()")
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add a driver for the random number generator present on the Broadcom
BCM74110 SoC.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Because the types of io.regsize and io.regspacing in the ipmipci_probe
function are unsigned int, they should be output in the %u format.
Signed-off-by: liujing <liujing@cmss.chinamobile.com>
Message-ID: <20241106111458.2157-1-liujing@cmss.chinamobile.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers matched by the "CHAR and MISC DRIVERS"
maintainer's entry to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new()
have the same prototypes, conversion is done by just changing the
structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20241021104511.405661-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy
according, as this leaves window for tpm_hwrng_read() to be called while
the operation is in progress. The recent bug report gives also evidence of
this behaviour.
Aadress this by locking the TPM chip before checking any chip->flags both
in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED
check inside tpm_get_random() so that it will be always checked only when
the lock is reserved.
Cc: stable@vger.kernel.org # v6.4+
Fixes: 99d4645062 ("tpm: Prevent hwrng from activating during resume")
Reported-by: Mike Seo <mikeseohyungjin@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219383
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Mike Seo <mikeseohyungjin@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/char/hw_random to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the allocation of chip->auth to tpm2_start_auth_session() so that this
field can be used as flag to tell whether auth session is active or not.
Instead of flushing and reloading the auth session for every transaction
separately, keep the session open unless /dev/tpm0 is used.
Reported-by: Pengyu Ma <mapengyu@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219229
Cc: stable@vger.kernel.org # v6.10+
Fixes: 7ca110f267 ("tpm: Address !chip->auth in tpm_buf_append_hmac_session*()")
Tested-by: Pengyu Ma <mapengyu@gmail.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Do not continue on tpm2_create_primary() failure in tpm2_load_null().
Cc: stable@vger.kernel.org # v6.10+
Fixes: eb24c9788c ("tpm: disable the TPM if NULL name changes")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Do not continue tpm2_sessions_init() further if the null key pair creation
fails.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d2add27cf2 ("tpm: Add NULL primary creation")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add support for Airoha TRNG. The Airoha SoC provide a True RNG module
that can output 4 bytes of raw data at times.
The module makes use of various noise source to provide True Random
Number Generation.
On probe the module is reset to operate Health Test and verify correct
execution of it.
The module can also provide DRBG function but the execution mode is
mutually exclusive, running as TRNG doesn't permit to also run it as
DRBG.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RNG max clock frequency can be updated to 48MHz for stm32mp1x
platforms according to the latest specifications.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Implement the support for STM32MP25x platforms. On this platform, a
security clock is shared between some hardware blocks. For the RNG,
it is the RNG kernel clock. Therefore, the gate is no more shared
between the RNG bus and kernel clocks as on STM32MP1x platforms and
the bus clock has to be managed on its own.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The embedded controller code is mainly used on x86 laptops and cannot
work without PC style I/O port access.
Make this a user-visible configuration option that is default enabled
on x86 but otherwise disabled, and that can never be enabled unless
CONFIG_HAS_IOPORT is also available.
The empty stubs in internal.h help ignore the EC code in configurations
that don't support it. In order to see those stubs, the sbshc code also
has to include this header and drop duplicate declarations.
All the direct callers of ec_read/ec_write already had an x86
dependency and now also need to depend on APCI_EC.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241011061948.3211423-1-arnd@kernel.org
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The format specifier of "unsigned int" in sprintf() should be "%u", not
"%d".
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the irq_get_nr_irqs() function instead of the global variable
'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global
variable into a variable with file scope.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-8-bvanassche@acm.org
Several small bugfixes all over the place.
Most notably, fixes the vsock allocation with GFP_KERNEL in atomic
context, which has been triggering warnings for lots of testers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmcEA2sPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpe84H/3vqJhHSzFL2p0JFEFYdWrWs/2ecQYFfgDYV
oBR+zPHepcdgLDp05y1+RWre+VWKKFHilZj/6f4Le1+AnXi/j0j8Cv5n0k7ZEyaE
R4bvnkd3FXoojMpalYJKnxy9GfUa3ID0NCmEFxqofrmTSfRWPd9k4YEjaf+9TEjO
c8lkXXQvDxG0Vz2gWee7IAnIsd+KrJ/2o2AtrmKxBCxy5+mbe09UKHZn0lRuoqK0
ywcQxxF7TjDMfRPjz1oElOu5OAueSacm9Tqgx0ef6xjhbkn+wuUTbgzs9h1mPv48
VgSq9BMfu/5XjFoeEcL51MMW4BI4us5yfOg/rg+PfH3SCiQjgTM=
=loze
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Several small bugfixes all over the place.
Most notably, fixes the vsock allocation with GFP_KERNEL in atomic
context, which has been triggering warnings for lots of testers"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/scsi: null-ptr-dereference in vhost_scsi_get_req()
vsock/virtio: use GFP_ATOMIC under RCU read lock
virtio_console: fix misc probe bugs
virtio_ring: tag event_triggered as racy for KCSAN
vdpa/octeon_ep: Fix format specifier for pointers in debug messages
If a buggy driver returns a length that is longer than the size
of the buffer provided to it, then this may lead to a buffer overread
in the caller.
Stop this by adding a check for it in the hwrng core.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Broadcom Broadband Access (BCA) SoC:s include the
iproc r200 hwrng so enable it to be selected for these
platforms.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked.
Fixes: 51bd6f2915 ("Add support for IPMB driver")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Message-ID: <20240926094419.25900-1-hanchunchao@inspur.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1. Sorry for the delay, conference travel for the past two
weeks has this and my other pull requests showing up real late
in the cycle.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem updates
all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUxoA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykEnwCgnv9Q9tNrabLB2VXu8dRgMCee0J4AoIc5qA7/
mLXk2wxl5+dt/dfNgZIp
=x5HV
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
This fixes the following issue discovered by code review:
after vqs have been created, a buggy device can send an interrupt.
A control vq callback will then try to schedule control_work which has
not been initialized yet. Similarly for config interrupt. Further, in
and out vq callbacks invoke find_port_by_vq which attempts to take
ports_lock which also has not been initialized.
To fix, init all locks and work before creating vqs.
Message-ID: <ad982e975a6160ad110c623c016041311ca15b4f.1726511547.git.mst@redhat.com>
Fixes: 17634ba255 ("virtio: console: Add a new MULTIPORT feature, support for generic ports")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just updates and fixes, no major changes.
I might send a PR during the release cycle addressing a performance issue in the
bus encryption:
1. https://bugzilla.kernel.org/show_bug.cgi?id=219229
2. https://lore.kernel.org/linux-integrity/20240917154444.702370-1-jarkko@kernel.org/
The first version of the patch set cut out already five seconds and I
expect similar figures from the current version but I really need some
more feedback. However, this week is not exactly optimal for getting
it, given the Vienna conference.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZumqbxIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9K2SQD9GY7NcUnXRaNydWDhtACGZraWhksmAwZ2
eNl6d8GdmdcBAMUsUWKqe48crDksQDW99b/BpfhVG3dsn5+nxMNasvsF
=snLK
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Just updates and fixes, no major changes"
* tag 'tpmdd-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: export tpm2_sessions_init() to fix ibmvtpm building
tpm: Drop explicit initialization of struct i2c_device_id::driver_data to 0
selftests: tpm2: test_smoke: Run only when TPM2 is avaialable.
MAINTAINERS: Add selftest files to TPM section
tpm: Clean up TPM space after command failure
Handle a bogus BMC a little better, fix autoload on some systems,
remove some deprecated interfaces from the docs.
-----BEGIN PGP SIGNATURE-----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=938Q
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.12-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Some minor fixes and cleanups for IPMI. Nothing big.
Handle a bogus BMC a little better, fix autoload on some systems,
remove some deprecated interfaces from the docs"
* tag 'for-linus-6.12-1' of https://github.com/cminyard/linux-ipmi:
ipmi: docs: don't advertise deprecated sysfs entries
ipmi:ssif: Improve detecting during probing
ipmi: ipmi_ssif: fix module autoloading
-----BEGIN PGP SIGNATURE-----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=mWCw
-----END PGP SIGNATURE-----
Merge tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
Commit 08d08e2e9f ("tpm: ibmvtpm: Call tpm2_sessions_init() to
initialize session support") adds call to tpm2_sessions_init() in ibmvtpm,
which could be built as a module. However, tpm2_sessions_init() wasn't
exported, causing libmvtpm to fail to build as a module:
ERROR: modpost: "tpm2_sessions_init" [drivers/char/tpm/tpm_ibmvtpm.ko] undefined!
Export tpm2_sessions_init() to resolve the issue.
Cc: stable@vger.kernel.org # v6.10+
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408051735.ZJkAPQ3b-lkp@intel.com/
Fixes: 08d08e2e9f ("tpm: ibmvtpm: Call tpm2_sessions_init() to initialize session support")
Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
tpm_dev_transmit prepares the TPM space before attempting command
transmission. However if the command fails no rollback of this
preparation is done. This can result in transient handles being leaked
if the device is subsequently closed with no further commands performed.
Fix this by flushing the space in the event of command transmission
failure.
Fixes: 745b361e98 ("tpm: infrastructure for TPM spaces")
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
- Core:
- Overhaul of posix-timers in preparation of removing the
workaround for periodic timers which have signal delivery
ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep
time since the large rewrite to a non-cascading wheel, but the
extra jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack
for real time tasks and enforce it at the core level instead of
having inconsistent individual checks in various timer setup
functions.
- The usual set of updates and enhancements all over the place.
- Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers
-----BEGIN PGP SIGNATURE-----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=jE0N
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEwAAKCRCRxhvAZXjc
osS0AQCgIpvey9oW5DMyMw6Bv0hFMRv95gbNQZfHy09iK+NMNAD9GALhb/4cMIVB
7YrZGXEz454lpgcs8AnrOVjVNfctOQg=
=e9s9
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This is the work to cleanup and shrink struct file significantly.
Right now, (focusing on x86) struct file is 232 bytes. After this
series struct file will be 184 bytes aka 3 cacheline and a spare 8
bytes for future extensions at the end of the struct.
With struct file being as ubiquitous as it is this should make a
difference for file heavy workloads and allow further optimizations in
the future.
- struct fown_struct was embedded into struct file letting it take up
32 bytes in total when really it shouldn't even be embedded in
struct file in the first place. Instead, actual users of struct
fown_struct now allocate the struct on demand. This frees up 24
bytes.
- Move struct file_ra_state into the union containg the cleanup hooks
and move f_iocb_flags out of the union. This closes a 4 byte hole
we created earlier and brings struct file to 192 bytes. Which means
struct file is 3 cachelines and we managed to shrink it by 40
bytes.
- Reorder struct file so that nothing crosses a cacheline.
I suspect that in the future we will end up reordering some members
to mitigate false sharing issues or just because someone does
actually provide really good perf data.
- Shrinking struct file to 192 bytes is only part of the work.
Files use a slab that is SLAB_TYPESAFE_BY_RCU and when a kmem cache
is created with SLAB_TYPESAFE_BY_RCU the free pointer must be
located outside of the object because the cache doesn't know what
part of the memory can safely be overwritten as it may be needed to
prevent object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up
adding a new cacheline.
So this also contains work to add a new kmem_cache_create_rcu()
function that allows the caller to specify an offset where the
freelist pointer is supposed to be placed. Thus avoiding the
implicit addition of a fourth cacheline.
- And finally this removes the f_version member in struct file.
The f_version member isn't particularly well-defined. It is mainly
used as a cookie to detect concurrent seeks when iterating
directories. But it is also abused by some subsystems for
completely unrelated things.
It is mostly a directory and filesystem specific thing that doesn't
really need to live in struct file and with its wonky semantics it
really lacks a specific function.
For pipes, f_version is (ab)used to defer poll notifications until
a write has happened. And struct pipe_inode_info is used by
multiple struct files in their ->private_data so there's no chance
of pushing that down into file->private_data without introducing
another pointer indirection.
But pipes don't rely on f_pos_lock so this adds a union into struct
file encompassing f_pos_lock and a pipe specific f_pipe member that
pipes can use. This union of course can be extended to other file
types and is similar to what we do in struct inode already"
* tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
fs: remove f_version
pipe: use f_pipe
fs: add f_pipe
ubifs: store cookie in private data
ufs: store cookie in private data
udf: store cookie in private data
proc: store cookie in private data
ocfs2: store cookie in private data
input: remove f_version abuse
ext4: store cookie in private data
ext2: store cookie in private data
affs: store cookie in private data
fs: add generic_llseek_cookie()
fs: use must_set_pos()
fs: add must_set_pos()
fs: add vfs_setpos_cookie()
s390: remove unused f_version
ceph: remove unused f_version
adi: remove unused f_version
mm: Removed @freeptr_offset to prevent doc warning
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEGwAKCRCRxhvAZXjc
ojIuAQC433+hBkvjvmQ7H0r5rgZSjUuCTG3bSmdU7RJmPHUHhwEA85v/NGq53f+W
IhandK6t+Cf0JYpFZ3N0bT88hDYVhQQ=
=9zGL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
_vdso_data is specific to x86 and __arch_get_k_vdso_data() is provided
so that all architectures can provide the requested pointer.
Do the same with _vdso_rng_data, provide __arch_get_k_vdso_rng_data()
and don't use x86 _vdso_rng_data directly.
Until now vdso/vsyscall.h was only included by time/vsyscall.c but now
it will also be included in char/random.c, leading to a duplicate
declaration of _vdso_data and _vdso_rng_data.
To fix this issue, move the declaration in a C file. vma.c looks like
the most appropriate candidate. We don't need to replace the definitions
in vsyscall.h by declarations as declarations are already in asm/vvar.h.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Performing SMP atomic operations on u64 fails on powerpc32:
CC drivers/char/random.o
In file included from <command-line>:
drivers/char/random.c: In function 'crng_reseed':
././include/linux/compiler_types.h:510:45: error: call to '__compiletime_assert_391' declared with attribute error: Need native word sized stores/loads for atomicity.
510 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
././include/linux/compiler_types.h:491:25: note: in definition of macro '__compiletime_assert'
491 | prefix ## suffix(); \
| ^~~~~~
././include/linux/compiler_types.h:510:9: note: in expansion of macro '_compiletime_assert'
510 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
././include/linux/compiler_types.h:513:9: note: in expansion of macro 'compiletime_assert'
513 | compiletime_assert(__native_word(t), \
| ^~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/barrier.h:74:9: note: in expansion of macro 'compiletime_assert_atomic_type'
74 | compiletime_assert_atomic_type(*p); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/barrier.h:172:55: note: in expansion of macro '__smp_store_release'
172 | #define smp_store_release(p, v) do { kcsan_release(); __smp_store_release(p, v); } while (0)
| ^~~~~~~~~~~~~~~~~~~
drivers/char/random.c:286:9: note: in expansion of macro 'smp_store_release'
286 | smp_store_release(&__arch_get_k_vdso_rng_data()->generation, next_gen + 1);
| ^~~~~~~~~~~~~~~~~
The kernel-side generation counter in the random driver is handled as an
unsigned long, not as a u64, in base_crng and struct crng.
But on the vDSO side, it needs to be an u64, not just an unsigned long,
in order to support a 32-bit vDSO atop a 64-bit kernel.
On kernel side, however, it is an unsigned long, hence a 32-bit value on
32-bit architectures, so just cast it to unsigned long for the
smp_store_release(). A side effect is that on big endian architectures
the store will be performed in the upper 32 bits. It is not an issue on
its own because the vDSO site doesn't mind the value, as it only checks
differences. Just make sure that the vDSO side checks the full 64 bits.
For that, the local current_generation has to be u64 as well.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
There are several comments all over the place, which uses a wrong singular
form of jiffies.
Replace 'jiffie' by 'jiffy'. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
It's unlikely that devm_pm_runtime_enable ever fails. Still, it makes
sense to read the return value and handle errors.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver uses the rst variable only for an initial reset when the chip
is probed. There's no need to store rst in the driver's private data, we
can make it a local variable in the probe function.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Huan Yang <link@vivo.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is another flag that is statically set and doesn't need to use up
an FMODE_* bit. Move it to ->fop_flags and free up another FMODE_* bit.
(1) mem_open() used from proc_mem_operations
(2) adi_open() used from adi_fops
(3) drm_open_helper():
(3.1) accel_open() used from DRM_ACCEL_FOPS
(3.2) drm_open() used from
(3.2.1) amdgpu_driver_kms_fops
(3.2.2) psb_gem_fops
(3.2.3) i915_driver_fops
(3.2.4) nouveau_driver_fops
(3.2.5) panthor_drm_driver_fops
(3.2.6) radeon_driver_kms_fops
(3.2.7) tegra_drm_fops
(3.2.8) vmwgfx_driver_fops
(3.2.9) xe_driver_fops
(3.2.10) DRM_GEM_FOPS
(3.2.11) DEFINE_DRM_GEM_DMA_FOPS
(4) struct memdev sets fmode flags based on type of device opened. For
devices using struct mem_fops unsigned offset is used.
Mark all these file operations as FOP_UNSIGNED_OFFSET and add asserts
into the open helper to ensure that the flag is always set.
Link: https://lore.kernel.org/r/20240809-work-fop_unsigned-v1-1-658e054d893e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit d2add27cf2 ("tpm: Add NULL primary creation") introduced
CONFIG_TCG_TPM2_HMAC. When this option is enabled on ppc64 then the
following message appears in the kernel log due to a missing call to
tpm2_sessions_init().
[ 2.654549] tpm tpm0: auth session is not active
Add the missing call to tpm2_session_init() to the ibmvtpm driver to
resolve this issue.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d2add27cf2 ("tpm: Add NULL primary creation")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
If an IPMI SSIF device is probed and there is something there, but
probably not an actual BMC, the code would just issue a lot of errors
before it failed. We kind of need these errors to help with certain
issues, and some of the failure reports are non-fatal.
However, a get device id command should alway work. If that fails,
nothing else is going to work and it's a pretty good indication that
there's no valid BMC there. So issue and check that command and bail
if it fails.
Reported-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Corey Minyard <corey@minyard.net>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from platform_device_id table.
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Message-Id: <20240819113855.787149-10-liuyuntao12@huawei.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Ensure, as the driver probes the device, that all endpoints that the
driver may attempt to access exist and are of the correct type.
All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at
address 1. This is verified in xillyusb_setup_base_eps().
On top of that, a XillyUSB device may have additional Bulk OUT
endpoints. The information about these endpoints' addresses is deduced
from a data structure (the IDT) that the driver fetches from the device
while probing it. These endpoints are checked in setup_channels().
A XillyUSB device never has more than one IN endpoint, as all data
towards the host is multiplexed in this single Bulk IN endpoint. This is
why setup_channels() only checks OUT endpoints.
Reported-by: syzbot+eac39cba052f2e750dbe@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/all/0000000000001d44a6061f7a54ee@google.com/T/
Fixes: a53d1202ae ("char: xillybus: Add driver for XillyUSB (Xillybus variant for USB)").
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20240816070200.50695-2-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the wakeup work item now runs on a separate workqueue, it needs to be
flushed separately along with flushing the device's workqueue.
Also, move the destroy_workqueue() call to the end of the exit method,
so that deinitialization is done in the opposite order of
initialization.
Fixes: ccbde4b128 ("char: xillybus: Don't destroy workqueue from work item running on it")
Cc: stable <stable@kernel.org>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20240816070200.50695-1-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the missing clk_disable_unprepare() before return in
cctrng_resume().
Fixes: a583ed310b ("hwrng: cctrng - introduce Arm CryptoCell driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rockchip SoCs used to have a random number generator as part of their
crypto device, and support for it has to be added to the corresponding
driver. However newer Rockchip SoCs like the RK3568 have an independent
True Random Number Generator device. This patch adds a driver for it,
greatly inspired from the downstream driver.
The TRNG device does not seem to have a signal conditionner and the FIPS
140-2 test returns a lot of failures. They can be reduced by increasing
RK_RNG_SAMPLE_CNT, in a tradeoff between quality and speed. This value
has been adjusted to get ~90% of successes and the quality value has
been set accordingly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[daniel@makrotpia.org: code style fixes]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before commit addea5858b ("hwrng: Kconfig - Do not enable by default
CN10K driver") the Marvell CN10K Random Number Generator was always
enabled when HW_RANDOM was enabled.
This was changed with that commit to prevent having this driver being
always enabled on arm64. To prevent introducing regression with some old
defconfig enable the driver when ARCH_THUNDER is enabled.
Fixes: addea5858b ("hwrng: Kconfig - Do not enable by default CN10K driver")
Closes: https://lore.kernel.org/all/SN7PR18MB53144B37B82ADEEC5D35AE0CE3AC2@SN7PR18MB5314.namprd18.prod.outlook.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 1fffe7a34c ("script: modpost: emit a warning when the
description is missing"), a module without a MODULE_DESCRIPTION() will
result in a warning with make W=1. The following warnings are being
observed in drivers/char when CONFIG_ARCH_NETWINDER is enabled:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/ds1620.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/nwbutton.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/nwflash.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240717-md-arm-drivers-char-nw-v1-1-fee7a8505e9e@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local variable period uses at most 32 bits and can be a u32 instead
of unsigned long. The upper 32 bits are all 0 after masking and right
shifting cap by HPET_COUNTER_CLK_PERIOD_SHIFT and can be discarded.
Since do_div() casts the divisor to u32 anyway, changing the data type
of period to u32 also removes the following Coccinelle/coccicheck
warning reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240710215238.799239-2-thorsten.blum@toblux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmaarzgACgkQSfxwEqXe
A66ZWBAAlhXx8bve0uKlDRK8fffWHgruho/fOY4lZJ137AKwA9JCtmOyqdfL4Dmk
VxFe7pEQJlQhcA/6kH54uO7SBXwfKlKZJth6SYnaCRMUIbFifHjjIQ0QqldjEKi0
rP90Hu4FVsbwQC7u9i9lQj9n2P36zb6pn83BzpZQ/2PtoVCSCrdSJUe0Rxa3H3GN
0+nNkDSXQt5otCByLaeE3x7KJgXLWL9+G2eFSFLTZ8rSVfMx1CdOIAG37WlLGdWm
BaFYPDKMyBTVvVJBNgAe9YSqtrsZ5nlmLz+Z9wAe/hTL7RlL03kWUu34/Udcpull
zzMDH0WMntiGK3eFQ2gOYSWqypvAjwHgn3BzqNmjUb69+89mZsdU1slcvnxWsUwU
D3vphrscaqarF629tfsXti3jc5PoXwUTjROZVcCyeFPBhyAZgzK8xUvPpJO+RT+K
EuUABob9cpA6FCpW/QeolDmMDhXlNT8QgsZu1juokZac2xP3Ly3REyEvT7HLbU2W
ZJjbEqm1ppp3RmGELUOJbyhwsLrnbt+OMDO7iEWoG8aSFK4diBK/ZM6WvLMkr8Oi
7ioXGIsYkCy3c47wpZKTrAapOPJp5keqNAiHSEbXw8mozp6429QAEZxNOcczgHKC
Ea2JzRkctqutcIT+Slw/uUe//i1iSsIHXbE81fp5udcQTJcUByo=
=P8aI
-----END PGP SIGNATURE-----
Merge tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
have been in linux-next for a while with no reported issues. The
Kconfig fixup went in 29 hours ago, so might have missed the latest
linux-next, but was acked by everyone involved.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
1LpTASaU6A8pN81Z1m5g
=6U1z
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
Several new features here:
- Virtio find vqs API has been reworked
(required to fix the scalability issue we have with
adminq, which I hope to merge later in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaXjQQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpnIsH/jVNqAQbe/vaBQdNMdnsA+P9A9unLbYRxYCQ
tN73mQRIXKtnZHBRAEbMGq52HPYg8HlN2HJSgyNo6I6t8VD+PiOco7m+3GpmqEcW
aXPOPl0BAbVoDgyutxRuuodP8Z61lBx0mG6iOxpzTXOPGlpQqtPCFHO8YnodqnPf
tMix/5uAqgZKV2siCbw5DtzwEc0gDHU8qsD0/nyoS5nBDF9yh/ardr5P/qiyFDQH
atCNYTOhIFU83pLAaw0fpCGbkt7gxf+5RpWVx3wkYww+/MwvYhsveRvQyaGbBz3n
WDtET3SOtVTta98OAGIKCq/2z8f6mYXBP7vXapBgnJG3vwS/poQ=
=LYua
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
Provide a generic C vDSO getrandom() implementation, which operates on
an opaque state returned by vgetrandom_alloc() and produces random bytes
the same way as getrandom(). This has the following API signature:
ssize_t vgetrandom(void *buffer, size_t len, unsigned int flags,
void *opaque_state, size_t opaque_len);
The return value and the first three arguments are the same as ordinary
getrandom(), while the last two arguments are a pointer to the opaque
allocated state and its size. Were all five arguments passed to the
getrandom() syscall, nothing different would happen, and the functions
would have the exact same behavior.
The actual vDSO RNG algorithm implemented is the same one implemented by
drivers/char/random.c, using the same fast-erasure techniques as that.
Should the in-kernel implementation change, so too will the vDSO one.
It requires an implementation of ChaCha20 that does not use any stack,
in order to maintain forward secrecy if a multi-threaded program forks
(though this does not account for a similar issue with SA_SIGINFO
copying registers to the stack), so this is left as an
architecture-specific fill-in. Stack-less ChaCha20 is an easy algorithm
to implement on a variety of architectures, so this shouldn't be too
onerous.
Initially, the state is keyless, and so the first call makes a
getrandom() syscall to generate that key, and then uses it for
subsequent calls. By keeping track of a generation counter, it knows
when its key is invalidated and it should fetch a new one using the
syscall. Later, more than just a generation counter might be used.
Since MADV_WIPEONFORK is set on the opaque state, the key and related
state is wiped during a fork(), so secrets don't roll over into new
processes, and the same state doesn't accidentally generate the same
random stream. The generation counter, as well, is always >0, so that
the 0 counter is a useful indication of a fork() or otherwise
uninitialized state.
If the kernel RNG is not yet initialized, then the vDSO always calls the
syscall, because that behavior cannot be emulated in userspace, but
fortunately that state is short lived and only during early boot. If it
has been initialized, then there is no need to inspect the `flags`
argument, because the behavior does not change post-initialization
regardless of the `flags` value.
Since the opaque state passed to it is mutated, vDSO getrandom() is not
reentrant, when used with the same opaque state, which libc should be
mindful of.
The function works over an opaque per-thread state of a particular size,
which must be marked VM_WIPEONFORK, VM_DONTDUMP, VM_NORESERVE, and
VM_DROPPABLE for proper operation. Over time, the nuances of these
allocations may change or grow or even differ based on architectural
features.
The opaque state passed to vDSO getrandom() must be allocated using the
mmap_flags and mmap_prot parameters provided by the vgetrandom_opaque_params
struct, which also contains the size of each state. That struct can be
obtained with a call to vgetrandom(NULL, 0, 0, ¶ms, ~0UL). Then,
libc can call mmap(2) and slice up the returned array into a state per
each thread, while ensuring that no single state straddles a page
boundary. Libc is expected to allocate a chunk of these on first use,
and then dole them out to threads as they're created, allocating more
when needed.
vDSO getrandom() provides the ability for userspace to generate random
bytes quickly and safely, and is intended to be integrated into libc's
thread management. As an illustrative example, the introduced code in
the vdso_test_getrandom self test later in this series might be used to
do the same outside of libc. In a libc the various pthread-isms are
expected to be elided into libc internals.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is additional fix that supplements my earlier fixes for handling
auth, which I unfortunately missed last time.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZpfCHhIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9LzygD+P7ityA8OCjY+e92v4HQtFW4BUmckYIFD
yZbEjQNrM5IBAKxgM2Mtyc3CPgEbA7SVmO7fdlpBJbhBofeIZKjtEvkN
=YUSL
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.11-rc1-roundtwo' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fix from Jarkko Sakkinen:
"An additional fix that supplements my earlier fixes for handling auth,
which I unfortunately missed last time"
* tag 'tpmdd-next-6.11-rc1-roundtwo' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Use auth only after NULL check in tpm_buf_check_hmac_response()
API:
- Test setkey in no-SIMD context.
- Add skcipher speed test for user-specified algorithm.
Algorithms:
- Add x25519 support on ppc64le.
- Add VAES and AVX512 / AVX10 optimized AES-GCM on x86.
- Remove sm2 algorithm.
Drivers:
- Add Allwinner H616 support to sun8i-ce.
- Use DMA in stm32.
- Add Exynos850 hwrng support to exynos.
-----BEGIN PGP SIGNATURE-----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=x80X
-----END PGP SIGNATURE-----
Merge tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Test setkey in no-SIMD context
- Add skcipher speed test for user-specified algorithm
Algorithms:
- Add x25519 support on ppc64le
- Add VAES and AVX512 / AVX10 optimized AES-GCM on x86
- Remove sm2 algorithm
Drivers:
- Add Allwinner H616 support to sun8i-ce
- Use DMA in stm32
- Add Exynos850 hwrng support to exynos"
* tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (81 commits)
hwrng: core - remove (un)register_miscdev()
crypto: lib/mpi - delete unnecessary condition
crypto: testmgr - generate power-of-2 lengths more often
crypto: mxs-dcp - Ensure payload is zero when using key slot
hwrng: Kconfig - Do not enable by default CN10K driver
crypto: starfive - Fix nent assignment in rsa dec
crypto: starfive - Align rsa input data to 32-bit
crypto: qat - fix unintentional re-enabling of error interrupts
crypto: qat - extend scope of lock in adf_cfg_add_key_value_param()
Documentation: qat: fix auto_reset attribute details
crypto: sun8i-ce - add Allwinner H616 support
crypto: sun8i-ce - wrap accesses to descriptor address fields
dt-bindings: crypto: sun8i-ce: Add compatible for H616
hwrng: core - Fix wrong quality calculation at hw rng registration
hwrng: exynos - Enable Exynos850 support
hwrng: exynos - Add SMC based TRNG operation
hwrng: exynos - Implement bus clock control
hwrng: exynos - Use devm_clk_get_enabled() to get the clock
hwrng: exynos - Improve coding style
dt-bindings: rng: Add Exynos850 support to exynos-trng
...
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa,
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts,
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4,
Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Change habanalabs maintainer and git repo path.
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT.
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates
-----BEGIN PGP SIGNATURE-----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=g+Ad
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
Some cleanups for device changes coming, and some range checks on data
coming from a host to a BMC.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmaWdSMACgkQYfOMkJGb
/4Hn+A//QT1AcV7cA42vvaH7Ohm+bjmfCa8lzWk72VlbSB0+83wdt9J9yBvLmNDw
Js4oRPt8eWft13+C/E7UlYuIEpLo6Vj3pGJ261hT3UteD3oIzZiF+fWzIFSYEjJz
xvGnTiqsiXCunwEjBfXvXWaGL9KXMsnkIyzLWHvD5qCaQqki5IJBQ2Ky9OnjRhri
sLITwdt+/aFDsPQuKaxZLkLs1GEdrR4q7pqVqyJvsaz/sV0t44rlf/kbcGIU8ow8
Mw53sRG1sN9tRGQvO1WUkkO63ZHu6BvhdflqWNEimS5/+vC/kQX6Dlfpd7CJU/QR
6M8maSIKq3w/YM7ieMsT7r+fJtYo5PE3MohjxCKaxPWJuNX+DJGOSiI/mXSe4hPM
mGBpqmbUQKZVuOtd8cPxU0V8EGrhCNOfWnmzxV1JSobD0bcEqNEITQzwtMb/V4pi
YJPdyUmfZnRXhhtO4Y5fD7Si3NR3BluiQB50LfV/YSBDb8VRsZoFWdW0uJxz+Z5Y
g1gqXsDbt7i8YDiSd+7zYTmh1NOmjd9tDp6YwA+5yEvoYgM/uuXhYlOsqQXCPm1D
jYV8fQaRWjsiocWH1HI4QJx4LRZG8FTXhvKufiQPsqZPqcezPp1nodONZhZk2xEf
luYUT+TvtLKYdq7LJvvNJRrIiCLgw5Zxi76mi2+rkd97FYoshWM=
=AnXj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.11-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Some cleanups for device changes coming, and some range checks on data
coming from a host to a BMC"
* tag 'for-linus-6.11-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Drop explicit initialization of struct i2c_device_id::driver_data to 0
ipmi: ssif_bmc: prevent integer overflow on 32bit systems
Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-20-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-12-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dereference auth after NULL check in tpm_buf_check_hmac_response().
Otherwise, unless tpm2_sessions_init() was called, a call can cause NULL
dereference, when TCG_TPM2_HMAC is enabled.
[jarkko: adjusted the commit message.]
Cc: stable@vger.kernel.org # v6.10+
Fixes: 7ca110f267 ("tpm: Address !chip->auth in tpm_buf_append_hmac_session*()")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Contains couuple of bug fixes.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iJYEABYKAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZoLQRCAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0mUwAQCmWMaUxGTJHaUO
WKqYQFwtFyKAaZgck7Lq3nJ/K2ssPgD+KDQ0Lq+XFBK8lpg99Rwuu46wSBvb1dV/
6lH6P1/WBwA=
=kywY
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"A couple of bug fixes.
No new features are coming for this release. I had one in progress but
decided to let it mature up until 6.12"
* tag 'tpmdd-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_tis_spi: add missing attpm20p SPI device ID entry
char: tpm: Fix possible memory leak in tpm_bios_measurements_open()
Do not enable by default the CN10K HW random generator driver.
CN10K Random Number Generator is available only on some specific
Marvell SoCs, however the driver is in practice enabled by default on
all arm64 configs.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Here are some small remaining driver fixes for 6.10-final that have all
been in linux-next for a while and resolve reported issues. Included in
here are:
- mei driver fixes (and a spelling fix at the end just to be clean)
- iio driver fixes for reported problems
- fastrpc bugfixes
- nvmem small fixes
Again, all have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZpEFIQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynszACgoKuFP7BNN2ZiC5PF/PgZwguAlN0AoLHWnriQ
r2bsUHDpyTgnz11rr1mw
=uwin
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small remaining driver fixes for 6.10-final that have
all been in linux-next for a while and resolve reported issues.
Included in here are:
- mei driver fixes (and a spelling fix at the end just to be clean)
- iio driver fixes for reported problems
- fastrpc bugfixes
- nvmem small fixes"
* tag 'char-misc-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: vsc: Fix spelling error
mei: vsc: Enhance SPI transfer of IVSC ROM
mei: vsc: Utilize the appropriate byte order swap function
mei: vsc: Prevent timeout error with added delay post-firmware download
mei: vsc: Enhance IVSC chipset stability during warm reboot
nvmem: core: limit cell sysfs permissions to main attribute ones
nvmem: core: only change name to fram for current attribute
nvmem: meson-efuse: Fix return value of nvmem callbacks
nvmem: rmem: Fix return value of rmem_read()
misc: microchip: pci1xxxx: Fix return value of nvmem callbacks
hpet: Support 32-bit userspace
misc: fastrpc: Restrict untrusted app to attach to privileged PD
misc: fastrpc: Fix ownership reassignment of remote heap
misc: fastrpc: Fix memory leak in audio daemon attach operation
misc: fastrpc: Avoid updating PD type for capability request
misc: fastrpc: Copy the complete capability structure to user
misc: fastrpc: Fix DSP capabilities request
iio: light: apds9306: Fix error handing
iio: trigger: Fix condition for own trigger
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/uninorth-agp.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-powerpc-drivers-char-agp-v1-1-b79bfd07da42@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While at it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Message-Id: <20240708150914.18190-2-u.kleine-koenig@baylibre.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*(). Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 1085b8276b ("tpm: Add the rest of the session HMAC API")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name(). Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.10+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: d0a25bb961 ("tpm: Add HMAC session name/handle append")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause
a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in
tpm2_*_auth_session().
Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 699e3efd6c ("tpm: Add HMAC session start and end functions")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
'devmodel' hasn't actually been used since:
'commit 3275158fa5 ("parport: remove use of devmodel")'
and everyone now has it set to true and has been fixed up; remove
the flag.
(There are still comments all over about it)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-4-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/bsr.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-powerpc-drivers-char-v1-1-bff22fd778a4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/dsp56k.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240617-md-m68k-drivers-char-dsp56k-v1-1-56e435ffa664@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/dtlk.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240617-md-m68k-drivers-char-dtlk-v1-1-a53a237f1f06@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"atmel,attpm20p" DT compatible is missing its SPI device ID entry, not
allowing module autoloading and leading to the following message:
"SPI driver tpm_tis_spi has no spi_device_id for atmel,attpm20p"
Based on:
commit 7eba41fe8c ("tpm_tis_spi: Add missing SPI ID")
Fix this by adding the corresponding "attpm20p" spi_device_id entry.
Fixes: 3c45308c44 ("tpm_tis_spi: Add compatible string atmel,attpm20p")
Cc: stable@vger.kernel.org # +v6.9
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In tpm_bios_measurements_open(), get_device() is called on the device
embedded in struct tpm_chip. In the error path, however, put_device() is
not called. This results in a reference count leak, which prevents the
device from being properly released. This commit makes sure to call
put_device() when the seq_open() call fails.
Cc: stable@vger.kernel.org # +v4.18
Fixes: 9b01b53566 ("tpm: Move shared eventlog functions to common.c")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When there are rng sources registering at the hwrng core via
hwrng_register() a struct hwrng is delivered. There is a quality
field in there which is used to decide which of the registered
hw rng sources will be used by the hwrng core.
With commit 16bdbae394 ("hwrng: core - treat default_quality as
a maximum and default to 1024") there came in a new default of
1024 in case this field is empty and all the known hw rng sources
at that time had been reworked to not fill this field and thus
use the default of 1024.
The code choosing the 'better' hw rng source during registration
of a new hw rng source has never been adapted to this and thus
used 0 if the hw rng implementation does not fill the quality field.
So when two rng sources register, one with 0 (meaning 1024) and
the other one with 999, the 999 hw rng will be chosen.
As the later invoked function hwrng_init() anyway adjusts the
quality field of the hw rng source, this adjustment is now done
during registration of this new hw rng source.
Tested on s390 with two hardware rng sources: crypto cards and
trng true random generator device driver.
Fixes: 16bdbae394 ("hwrng: core - treat default_quality as a maximum and default to 1024")
Reported-by: Christian Rund <Christian.Rund@de.ibm.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add Exynos850 compatible and its driver data. It's only possible to
access TRNG block via SMC calls in Exynos850, so specify that fact using
EXYNOS_SMC flag in the driver data.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On some Exynos chips like Exynos850 the access to Security Sub System
(SSS) registers is protected with TrustZone, and therefore only possible
from EL3 monitor software. The Linux kernel is running in EL1, so the
only way for the driver to obtain TRNG data is via SMC calls to EL3
monitor. Implement such SMC operation and use it when EXYNOS_SMC flag is
set in the corresponding chip driver data.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some SoCs like Exynos850 might require the SSS bus clock (PCLK) to be
enabled in order to access TRNG registers. Add and handle the optional
PCLK clock accordingly to make it possible.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_clk_get_enabled() helper instead of calling devm_clk_get() and
then clk_prepare_enable(). It simplifies the error handling and makes
the code more compact. Also use dev_err_probe() to handle possible
-EPROBE_DEFER errors if the clock is not available yet.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix obvious style issues. Some of those were found with checkpatch, and
some just contradict the kernel coding style guide.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/amd64-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/intel-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/intel-gtt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/sis-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/via-agp.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603-md-agp-v1-1-9a1582114ced@quicinc.com
With ARCH=i386, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/ali-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/ati-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/amd-k7-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/efficeon-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/nvidia-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/sworks-agp.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes alpha-agp.c and parisc-agp.c which, although they did
not produce a warning with the i386 allmodconfig configuration, may
cause this warning with other configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/cavium-rng.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/cavium-rng-vf.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/arm_smccc_trng.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
