One new driver: leapraid (similar to mpi3mr but OK'd by Broadcom). The
usual suspects for driver updates (ufs, qla2xxx, smartpqi, zfcp, fnic,
ibmvfc) plus a few small core updates: a fix for an uninitialized sg
list pad bytes plus the removal of the dma mask check for max
sectors. The big update in the sd driver is mostly code refactoring for
obscure error leg handling.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaogFixsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIW3+AEAk1xhTuoYYPb87dWVpo74D0KwOjw144uQ
jxBbQRx3mV8A/1kzGC5/eGU5XcruUaU6DXcYE7KSb+5aqFdjcHhj1e8a
=7IX1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"One new driver: leapraid (similar to mpi3mr but OK'd by Broadcom). The
usual suspects for driver updates (ufs, qla2xxx, smartpqi, zfcp, fnic,
ibmvfc) plus a few small core updates: a fix for an uninitialized sg
list pad bytes plus the removal of the dma mask check for max sectors.
The big update in the sd driver is mostly code refactoring for obscure
error leg handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: fnic: Fix built-in NVMe/FC build
scsi: fnic: Fix invalid comparison for error
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
scsi: zfcp: Enable CONTEXT_ANALYSIS
scsi: zfcp: Add __must_hold() attribute to zfcp_qdio_sbal_get()
scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock
scsi: storvsc: Support manual scans for all Hyper-V targets
scsi: sd: Fix sd_done() sense handling condition
scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails
scsi: sd: Fix error handling in sd_probe() after large pool creation failure
scsi: leapraid: Add driver documentation
scsi: leapraid: Add new SCSI driver
scsi: ufs: Add support for the aggregated read query opcode
scsi: ufs: Use unsigned types for the BSG query
scsi: ibmvfc: Fix spelling mistake "Deleteing" -> "Deleting"
scsi: qla2xxx: Update version to 12.00.00.2607b2
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak
...
Qualcomm UFS controller found on SoCs SA8255P/SA8797P has a MCQ I/O address
space. It should be defined in the bindings even though Linux driver
currently doesn't utilize it. Fix the binding before it gets adopted by
DTS.
Fixes: e2725ed2a7 ("scsi: ufs: dt-bindings: Document bindings for SA8255P UFS Host Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720023552.2667237-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS v5.0/UFSHCI v5.0 adds HS-G6 support (46.6 Gbps/lane) via UniPro v3.0
and M-PHY v6.0. These specs define TX Equalization for all High-Speed Gears
(not only HS-G6) to compensate channel loss and improve signal integrity at
high speed.
For HS-G6, M-PHY uses PAM4 1b1b line coding. Pre-Coding may also be
required depending on channel characteristics.
Document vendor-neutral properties in ufs-common.yaml:
- txeq-preshoot-g[1-6]
- txeq-deemphasis-g[1-6]
- tx-precode-enable-g6
Values are per-lane Host/Device tuples (2 values for x1, 4 values for
x2). PreShoot/DeEmphasis range from 0..7, and Precode is 0/1.
These are board-specific signal-integrity tuning values. They depend on
channel SI/PHY characterization and validation (host PHY, device PHY,
package, and board routing), and are determined by HW/PHY designers.
Although UFSHCI v5.0 supports TX Equalization Training via UniPro v3.0,
which allows host software to determine optimal TX Equalization at
runtime, static board-specific TX Equalization settings in the Device
Tree are still necessary because:
- TX Equalization Training is not supported for HS-G3 and below
- TX Equalization Training is disabled on some platforms
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260616113348.1168248-2-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the UFS Controller on the Hawi Platform.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Palash Kambar <palash.kambar@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260526090956.2340262-3-palash.kambar@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add samsung,exynosautov920-ufs compatible for ExynosAutov920 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sowon Na <sowon.na@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://patch.msgid.link/20260417121452.827054-3-alim.akhtar@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SA8797P is the automotive variant of the Nord SoC. Like SA8255P, its
platform firmware implements an SCMI server that manages UFS resources
such as the PHY, clocks, regulators and resets via the SCMI power
protocol. As a result, the OS-visible DT only describes the controller's
MMIO, interrupt, IOMMU and power-domain interfaces, making SA8255P the
appropriate fallback compatible.
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427013115.231731-3-shengchao.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document UFS Host Controller on Qualcomm Nord SoC. Like the Eliza SoC,
Nord has a multi-queue command (MCQ) register range in addition to the
standard one, making both reg entries required.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427013115.231731-2-shengchao.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the mphy reset property to the devicetree bindings for the Rockchip
RK3576 UFS host controller. The mphy reset signal is used to reset the
physical adapter. Resetting other components while leaving the mphy unreset
may occasionally prevent the UFS controller from successfully linking up
with the device.
This addresses an intermittent hardware bug where the UFS link fails to
establish under specific timing conditions with certain chips. While
difficult to reproduce initially, this issue was consistently observed in
downstream testing and requires explicit mphy reset control for full
stability.
Although this change increases the maxItems for resets and adds a new entry
(which technically alters the binding ABI), it does not break compatibility
for existing Linux systems. The driver uses
devm_reset_control_array_get_exclusive() to manage resets, allowing it to
function correctly with both older Device Trees (without the mphy entry)
and newer ones.
Fixes: d90e920237 ("scsi: ufs: dt-bindings: Document Rockchip UFS host controller")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/1773368467-109650-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the UFS Controller on the Eliza Platform.
The IP block version here is 6.0.0, exactly the same as on SM8650.
While MCQ reg range is also available on the already documented platforms,
enforce only starting with Eliza.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260311-eliza-bindings-ufs-v3-1-498b26864182@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add UFS Host Controller (UFSHC) compatible for x1e80100 SoC. Use SM8550
as a fallback since x1e80100 is fully compatible with it.
Qualcomm UFSHC is no longer compatible with JEDEC UFS-2.0 binding.
Avoid using the "jedec,ufs-2.0" string in the compatible property.
[mkp: conflict resolution]
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
Link: https://patch.msgid.link/20260211132926.3716716-2-pradeep.pragallapati@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the UFS Controller on the Milos SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260112-milos-ufs-v2-2-d3ce4f61f030@fairphone.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes. The biggest core change is the massive code
motion in the sd driver to remove forward declarations and the most
significant change is to enumify the queuecommand return.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaY4ljBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIWFlwEAr9nc1ntxH4UNPgFCVjKyAOa5IE+p5o5C
2lwQIufcihEBAORvI9KO6AoEK6v9TmMKZXoyVsDRFe79fQE5NwCjfAA3
=My8f
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
Document the device tree bindings for UFS host controller on Qualcomm
SA8255P platform which integrates firmware-managed resources.
The platform firmware implements the SCMI server and manages resources
such as the PHY, clocks, regulators and resets via the SCMI power
protocol. As a result, the OS-visible DT only describes the controller’s
MMIO, interrupt, IOMMU and power-domain interfaces.
The generic "qcom,ufshc" and "jedec,ufs-2.0" compatible strings are
removed from the binding, since this firmware managed design won't be
compatible with the drivers doing full resource management.
Co-developed-by: Anjana Hari <anjana.hari@oss.qualcomm.com>
Signed-off-by: Anjana Hari <anjana.hari@oss.qualcomm.com>
Signed-off-by: Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260113080046.284089-3-ram.dwivedi@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace Stanley Chu with me and Chaotian in the maintainers field since
Stanley's email address is no longer active.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251031122008.1517549-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "reg" in top-level has maxItems:2, thus repeating this in "if:then:"
blocks is redundant. Similarly number of items cannot be less than 1.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251027113107.75835-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ajay Neeli <ajay.neeli@amd.com> says:
This patch series adds support for the UFS driver on the AMD Versal
Gen 2 SoC. It includes:
- Device tree bindings and driver implementation.
- Secure read support for the secure retrieval of UFS calibration
values.
The UFS host driver is based upon the Synopsis DesignWare (DWC) UFS
architecture, utilizing the existing UFSHCD_DWC and UFSHCD_PLATFORM
drivers.
Link: https://patch.msgid.link/20251021113003.13650-1-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add devicetree document for UFS Host Controller on AMD Versal Gen 2 SoC.
This includes clocks and clock-names as mandated by UFS common bindings.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Co-developed-by: Ajay Neeli <ajay.neeli@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-2-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UFS controller can be part of a power domain, so we need to allow
the relevant property 'power-domains'.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://patch.msgid.link/20251007-power-domains-scsi-ufs-dt-bindings-exynos-v1-1-1acfa81a887a@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the UFS Controller on the Kaanapali Platform.
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Message-Id: <20250924-knp-ufs-v1-1-42e0955a1f7c@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com> says:
This patch series adds support for limiting the maximum high-speed
gear and rate used by the UFS controller via device tree properties.
Some platforms may have signal integrity, clock configuration, or
layout issues that prevent reliable operation at higher gears or
rates. This is especially critical in automotive and other platforms
where stability is prioritized over peak performance.
The series follows this logical progression:
1. Document the new DT properties in the common UFS binding
2. Clean up existing redundant code in the qcom driver
3. Add platform-level parsing support for the new properties
4. Integrate the platform support in the qcom driver
This approach makes the functionality available to other UFS host
drivers and provides a cleaner, more maintainable implementation.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add optional "limit-hs-gear" and "limit-rate" properties to the UFS
controller common binding. These properties allow limiting the maximum
HS gear and rate.
This is useful in cases where the customer board may have signal
integrity, clock configuration or layout issues that prevent reliable
operation at higher gears. Such limitations are especially critical in
those platforms, where stability is prioritized over peak performance.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The binding for Qualcomm SoC UFS controllers grew and it will grow
further. Split SM8650 and SM8750 UFS controllers which:
1. Do not reference ICE as IO address space, but as phandle,
2. Have same order of clocks.
3. Have MCQ I/O address space. Document that MCQ address space as
optional to maintain backwards compatibility and because Linux
drivers can operate perfectly fine without it (thus without MCQ
feature). Linux driver already uses "mcq" as possible name for
"reg-names" property.
The split allows easier review and maintenance of the binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250731-dt-bindings-ufs-qcom-v2-3-53bb634bf95a@linaro.org
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The binding for Qualcomm SoC UFS controllers grew and it will grow
further. Split SC7180 and several other devices which:
1. Do not reference ICE as I/O address space, but as a phandle,
2. Have same order of clocks (SC7180 has one clock less than SC7280 and
other variants in split binding).
The split allows easier review and maintenance of the binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250731-dt-bindings-ufs-qcom-v2-2-53bb634bf95a@linaro.org
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The binding for Qualcomm SoC UFS controllers grew and it will grow
further. It already includes several conditionals, partially for
difference in handling encryption block (ICE, either as phandle or as
I/O address space) but it will further grow for MCQ.
Prepare for splitting this one big binding into several ones for common
group of devices by defining common part for all Qualcomm UFS schemas.
This only moves code, no functional impact expected.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250731-dt-bindings-ufs-qcom-v2-1-53bb634bf95a@linaro.org
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add MT8195 UFSHCI compatible string. Relax the schema to allow between
one to eight clocks/clock-names entries for all MediaTek UFS
nodes. Legacy platforms may only need a few clocks, whereas newer devices
such as the MT8195 require additional clock-gating domains. For MT8195
specifically, enforce exactly eight clocks and clock-names entries to
satisfy its hardware requirements.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250722085721.2062657-3-macpaul.lin@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the 'mediatek,ufs-disable-mcq' property to the UFS device-tree
bindings. This flag corresponds to the UFS_MTK_CAP_DISABLE_MCQ host
capability recently introduced in the UFS host driver, allowing it to
disable the Multiple Circular Queue (MCQ) feature when present. The
binding schema has also been updated to resolve DTBS check errors.
Cc: stable@vger.kernel.org
Fixes: 46bd3e31d7 ("scsi: ufs: mediatek: Add UFS_MTK_CAP_DISABLE_MCQ")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250722085721.2062657-2-macpaul.lin@mediatek.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On R-Car S4-8 ES1.2, the E-FUSE block contains PLL and AFE tuning
parameters for the Universal Flash Storage controller. Document the
related NVMEM properties, and update the example.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2f337169f8183d48b7d94ee13565fea804aade84.1741179611.git.geert+renesas@glider.be
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Link: https://lore.kernel.org/r/20250107131019.246517-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document the Universal Flash Storage(UFS) Controller on the Qualcomm
QCS8300 Platform.
Signed-off-by: Xin Liu <quic_liuxin@quicinc.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20240911-qcs8300_ufs_binding-v2-1-68bb66d48730@quicinc.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no need to mention and/or to touch in any way the intermediate
(source) clocks. Drop them from MSM8996 UFSHCD schema, making it follow
the example lead by all other platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240528-msm8996-fix-ufs-v5-1-b475c341126e@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers. The remaining patches are assorted minor fixes and
deprecated function updates plus a bit of constification.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZkOnWyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYe7AP93XRN/
xnccJbSTTUL4FFGobq2CYXv58Na+FM/b/+/kEAD+PNi0LmHDdDTOaFUblMd9l4lj
mpvYLRvJ6ifnHX6WXAg=
=PVnL
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
Add dedicated google,gs101-ufs compatible for Google Tensor gs101 SoC.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-2-peter.griffin@linaro.org
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document already upstreamed and used Qualcomm SM6125 UFS host controller to fix
dtbs_check warnings like:
sm6125-xiaomi-laurel-sprout.dtb: ufs@4804000: compatible:0: 'qcom,sm6125-ufshc' is not one of ['qcom,msm8994-ufshc', ...
sm6125-xiaomi-laurel-sprout.dtb: ufs@4804000: Unevaluated properties are not allowed ('compatible' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20240326174632.209745-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Document already upstreamed and used Qualcomm SC7180 UFS host controller
to fix dtbs_check warnings like:
sc7180-idp.dtb: ufshc@1d84000: compatible:0: 'qcom,sc7180-ufshc' is not one of ...
sc7180-idp.dtb: ufshc@1d84000: clocks: [[39, 99], [39, 7], [39, 98], [39, 107], [36, 0], [39, 106], [39, 105]] is too short
sc7180-idp.dtb: ufshc@1d84000: clock-names: ['core_clk', 'bus_aggr_clk', 'iface_clk', 'core_clk_unipro', ...] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326174632.209745-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Document already upstreamed and used Qualcomm SC8180x UFS host
controller to fix dtbs_check warnings like:
sc8180x-primus.dtb: ufshc@1d84000: compatible:0: 'qcom,sc8180x-ufshc' is not one of ['qcom,msm8994-ufshc', ... ]
sc8180x-primus.dtb: ufshc@1d84000: Unevaluated properties are not allowed ('compatible' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326174632.209745-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
- Improve devlink dependency parsing for DT graphs
- Fix devlink handling of io-channels dependencies
- Fix PCI addressing in marvell,prestera example
- A few schema fixes for property constraints
- Improve performance of DT unprobed devices kselftest
- Fix regression in DT_SCHEMA_FILES handling
- Fix compile error in unittest for !OF_DYNAMIC
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmXOLfMACgkQ+vtdtY28
YcNTRQ//YdGGVejPw+i2Kic2EuMZYPOMhsf8CqX8Dw9uuAgBJ1MRwpynh+Ze6vzE
6wL/29TE5T3zQ2JO0xpEGBJmKFqErnc5mJry8nKzK7I2mt4tdq+il+0Myr3c0JOs
IU+5X7+GEyE2EZPZjz0fHNlsdcUSEBeRTn+iLOG65gOZCXZpe5yQk76yYLpLg4PR
qRPAOQOlmjsLk8rf7b7qmEVrK+IxEXs19AH6bk+6CoXM41giS8qDBG5wSqnnPK77
QghKTw9/6dgi24JSq3Y+YIJV3G/b5nLydTjjon9rMIu/wZHS3c1JC0jlqGjvpCM9
vaxj7buczFGXZE/v1a2mb69OSauVqQhgM211GNtUClm1iaK6PSjMWCTHwVtzDHaS
Dvl3iF+Y51xpooRItJxadj23N1iWmckwMiSoIJKRtBpJ2ZV+B/1OT4nH9OS+WmIu
OFtGj0dnsIfX+JxA+zgQrgrUY+N9KLJi3yxzVd4zgq9AUIMI34a/Mq0lZs1lUbAF
f30dUcj9GzrpPchsr+Nu0NUSsoZSPr6dA+2+JbOllkkI1u9OgG/B/NGvLwFX94ry
20nymH1CFglE1gwG6LXcOBZCBJH57vh6zsETJfHEOJ4h7w3hcwXIvXlW7c72q6Jw
LWWMdBBJ9xSGr8eJaKlGJYutIJ/7VwuSUgTv2k+5Gav4gfBlNHQ=
=NqMr
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Improve devlink dependency parsing for DT graphs
- Fix devlink handling of io-channels dependencies
- Fix PCI addressing in marvell,prestera example
- A few schema fixes for property constraints
- Improve performance of DT unprobed devices kselftest
- Fix regression in DT_SCHEMA_FILES handling
- Fix compile error in unittest for !OF_DYNAMIC
* tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg"
of: property: Add in-ports/out-ports support to of_graph_get_port_parent()
of: property: Improve finding the supplier of a remote-endpoint property
of: property: Improve finding the consumer of a remote-endpoint property
net: marvell,prestera: Fix example PCI bus addressing
of: unittest: Fix compile in the non-dynamic case
of: property: fix typo in io-channels
dt-bindings: tpm: Drop type from "resets"
dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints
dt-bindings: xilinx: replace Piyush Mehta maintainership
kselftest: dt: Stop relying on dirname to improve performance
dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. "samsung,sysreg" is
the latter and needs to be constrained to a single entry with a phandle and
offset.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124190733.1554314-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZZ7roSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisha3lAQC5BAGM
7OKk39iOtsKdq8uxYAhYx871sNtwBp8+BSk1FgEAhy1hg7fgCnOvl7chbSNDR6p/
mW11fYi4j2UvxECT2tg=
=/tvT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (135 commits)
scsi: ufs: core: Simplify ufshcd_auto_hibern8_update()
scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static
scsi: ufs: qcom: Fix ESI vector mask
scsi: ufs: host: Fix kernel-doc warning
scsi: hisi_sas: Correct the number of global debugfs registers
scsi: hisi_sas: Rollback some operations if FLR failed
scsi: hisi_sas: Check before using pointer variables
scsi: hisi_sas: Replace with standard error code return value
scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
scsi: ufs: core: Add sysfs node for UFS RTC update
scsi: ufs: core: Add UFS RTC support
scsi: ufs: core: Add ufshcd_is_ufs_dev_busy()
scsi: ufs: qcom: Remove unused definitions
scsi: ufs: qcom: Use ufshcd_rmwl() where applicable
scsi: ufs: qcom: Remove support for host controllers older than v2.0
scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset
scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl()
scsi: ufs: qcom: Sort includes alphabetically
scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array
scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional()
...
Document the compatible string for the UFS found on SC7280.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231205-sc7280-ufs-v6-1-ad6ca7796de7@fairphone.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The Message Signaled Interrupts (MSI) support has been introduced in UFSHCI
version 4.0 (JESD223E). The MSI is the recommended interrupt approach for
MCQ. If choose to use MSI, in UFS DT, we need to provide msi-parent
property that point to the hardware entity which serves as the MSI
controller for this UFS controller.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/1701144469-1018-1-git-send-email-quic_ziqichen@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the UFS Controller on the SM8650 Platform.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-bindings-ufs-v3-1-a96364463fd5@linaro.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Except scaling UFS and bus clocks, it's necessary to scale also the
voltages of regulators or power domain performance state levels. Adding
Operating Performance Points table allows to adjust power domain
performance state, depending on the UFS clock speed.
OPPv2 deprecates previous property limited to clock scaling:
freq-table-hz.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
