The i2c block on the Apple silicon t8122 (M3) SoC is compatible with the
existing driver. Add "apple,t8122-i2c" as SoC specific compatible under
"apple,t8103-i2c" used by the deriver.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add the T7 SOC compatible which fallback to AXG compatible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
- cx92755: convert I2C bindings to DT schema
- mediatek: add optional bus power management during transfers
- pxa: handle early bus busy condition
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaeQfzQAKCRDaeAVmJtMt
bhZbAP4yxgj5FEkHaKYHEsUwXfh4zUEciWcXWaSrElrkn5/79AD/fy/zjO47zKEo
KBf6uQurXv+RCT3uwDU5QowVoYuanwo=
=5+1V
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-7.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v7.1, part 2
- cx92755: convert I2C bindings to DT schema
- mediatek: add optional bus power management during transfers
- pxa: handle early bus busy condition
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
- various minor improvements in other drivers
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support
-----BEGIN PGP SIGNATURE-----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=G0Mn
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.1-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"The biggest news in this pull request is that it will start the last
cycle of me handling the I2C subsystem. From 7.2. on, I will pass
maintainership to Andi Shyti who has been maintaining the I2C drivers
for a while now and who has done a great job in doing so.
We will use this cycle for a hopefully smooth transition. Thanks must
go to Andi for stepping up! I will still be around for guidance.
Updates:
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
- various minor improvements in other drivers
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support"
* tag 'i2c-for-7.1-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (40 commits)
i2c: usbio: Add ACPI device-id for NVL platforms
i2c: qcom-geni: Avoid extra TX DMA TRE for single read message in GPI mode
i2c: atr: use kzalloc_flex
i2c: spacemit: introduce pio for k1
i2c: spacemit: move i2c_xfer_msg()
i2c: xiic: skip input clock setup on non-OF systems
i2c: xiic: use numbered adapter registration
i2c: xiic: cosmetic: use resource format specifier in debug log
i2c: xiic: cosmetic cleanup
i2c: xiic: switch to generic device property accessors
i2c: xiic: remove duplicate error message
i2c: xiic: switch to devres managed APIs
i2c: rtl9300: add RTL9607C i2c controller support
i2c: rtl9300: introduce new function properties to driver data
i2c: rtl9300: introduce clk struct for upcoming rtl9607 support
dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and RTL9607C support
i2c: rtl9300: introduce a property for 8 bit width reg address
i2c: rtl9300: introduce F_BUSY to the reg_fields struct
i2c: rtl9300: introduce max length property to driver data
i2c: rtl9300: split data_reg into read and write reg
...
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCadr17AAKCRDaeAVmJtMt
bizzAQDCHLEArnhcBTTsKQbElK/aDERIj1M1ouIxGzOJQ2ZHpAD8DwKkYsouZ26L
KdedUr8vu9aqZhzwj1J48/G60QCbhAw=
=8/VF
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-7.1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v7.1, part 1
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support
Add the "realtek,rtl9607-i2c" compatible for i2c controller on the
RTL9607C SoC series.
Add a clocks property to the properties to describe the i2c reference
clock and make it available for all the compatibles. This i2c reference
clock is assumed to be coming from switchcore region via Lexra bus as
the other SoC peripherals.
According to the info available about the existing devices, they also
have the i2c master controller clocks.
RTL9607C requires the "realtek,scl" and "clocks" to be specified
and so handle it under separate if check for "realtek,rtl9607-i2c".
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260401180648.337834-6-adilov@disroot.org
Convert the IOP3xx and IXP4xx XScale bindings to DT schema. This
conversion also adds the interrupts property, as it is used by the driver
and existing DTS files but was not documented in the original binding.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260330054439.9545-1-i.shihao.999@gmail.com
Add a compatible string for the I2C controller found in SpacemiT K3 SoC
which use same I2C IP as K1, so make it fallback to K1 compatible.
Signed-off-by: Yixun Lan <dlan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://lore.kernel.org/r/20260325-02-k3-i2c-v1-1-78f29c83d9ac@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
As stated in the d70f60ad96 ("i2c: designware: Remove
not-going-to-be-supported code for Baikal SoC") the Baikal
platforms are not supported and the respective driver code
was removed. Remove the currently unused bindings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260224115210.3499191-1-andriy.shevchenko@linux.intel.com
Document the Renesas RZ/G3L (R9A08G046) RIIC IP. This is compatible with
the version available on Renesas RZ/V2H (R9A09G057).
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add Milos compatible for the CAMSS CCI interfaces.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Jarkko does now work for Intel anymore and since I'm currently
maintaining this driver, update my contact information here to make sure
patches get Cc'd to me as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> (internally)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware: use a dedicated algorithm for AMD Navi
- designware: replace magic numbers with named constants
- designware: replace min_t() with min() to avoid u8 truncation
- designware: refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
at24 updates for v7.0-rc1
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
-----BEGIN PGP SIGNATURE-----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=gCyg
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware:
- use a dedicated algorithm for AMD Navi
- replace magic numbers with named constants
- replace min_t() with min() to avoid u8 truncation
- refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
- at24 i2c eeprom:
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
* tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
i2c: imx-lpi2c: fix SMBus block read NACK after byte count
i2c: designware: Remove an unnecessary condition
i2c: designware: Enable mode swapping
i2c: designware: Combine the init functions
i2c: designware: Combine some of the common functions
i2c: designware: Use device_is_compatible() instead of custom approach
dt-bindings: eeprom: at24: Add compatible for Puya P24C128F
drivers/i2c/busses: use min() instead of min_t()
i2c: imx-lpi2c: Add runtime PM support for IRQ and clock management on i.MX8QXP/8QM
i2c: amd-mp2: clean up amd_mp2_find_device()
i2c: designware: Replace magic numbers with named constants
i2c: rtl9300: use of instead of fwnode
i2c: rtl9300: remove const cast
i2c: tegra: remove unused rst
i2c: designware: Remove not-going-to-be-supported code for Baikal SoC
i2c: spacemit: drop useless spaces
i2c: mlxbf: Use HZ_PER_KHZ in the driver
i2c: mlxbf: Remove unused bus speed definitions
i2c: core: Use dev_fwnode()
i2c: core: Replace custom implementation of device_match_fwnode()
...
There are a handful of new SoCs this time, all of these are
more or less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is
entirely unrelated with the similarly named Texas Instruments
K3 chip family that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built
on newer Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3
(SM7635) mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high
performance Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of
chips we already support, i.e. the i.MX8QM and i.MX952, with
fewer CPU cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400,
ST spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI am3703/am3715.
All of these could be restored easily if a new board gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI
based firmware.
A relatively small number of 43 boards get added this time, and
almost all of them for arm64. Aside from the reference boards for
the newly added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4,
CIX sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95,
Qualcomm qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards
getting a warning-free dtc build, and the usual work on adding
support for more hardware on the previously added machines.
-----BEGIN PGP SIGNATURE-----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=IK23
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
This is a USB HID device which includes an I2C controller and 8 GPIO pins.
The binding allows describing the chip's gpio and i2c controller in DT,
with the i2c controller being bound to a subnode named "i2c". This is
intended to be used in configurations where the CP2112 is permanently
connected in hardware.
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260127-cp2112-dt-v13-1-6448ddd4bf22@plexus.com
The three instances of CCI found on the QCS8300 are functionally the same
as on a number of existing Qualcomm SoCs.
Introduce a new SoC-specific compatible string "qcom,qcs8300-cci" with a
common fallback.
Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260121183142.1867199-2-quic_nihalkum@quicinc.com
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware: use a dedicated algorithm for AMD Navi
- designware: replace magic numbers with named constants
- designware: replace min_t() with min() to avoid u8 truncation
- designware: refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaX1xMAAKCRDaeAVmJtMt
bjO6AQC6bijHlaGDuzDPzAb3ucvERl3c4q5EE5HNElD3yBFT4gEAnzuk3te0GpJs
T4yjaBX0d433H9dz5VfZ1HdCo+fU/Ag=
=VD4Y
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.20
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware: use a dedicated algorithm for AMD Navi
- designware: replace magic numbers with named constants
- designware: replace min_t() with min() to avoid u8 truncation
- designware: refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
Highlights:
----------
- MCU:
- Update/add Led support on ST boards.
- MPU:
- STM32MP13:
- Add boot led and red led on ST DK board.
- STMP32MP15:
- Add boot led and red led on ST DK boards.
- Add SPI1 sleep pinctrl group.
- STM32MP23:
- Add green ,orange and boot leds on ST boards.
- Add SPI, I2C, DCMIPP and CSI instances to CLUSTER_PD
power domain.
- Enable analog-filter to all I2C instances.
- STM32MP25:
- Add green ,orange and boot leds on ST boards.
- Add SPI, I2C, DCMIPP and CSI instances to CLUSTER_PD
power domain.
- Enable analog-filter to all I2C instances.
- Add LPDDR/DDR channels to ST boards.
-----BEGIN PGP SIGNATURE-----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=fwdw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ttY4
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.20, round 1
Highlights:
----------
- MCU:
- Update/add Led support on ST boards.
- MPU:
- STM32MP13:
- Add boot led and red led on ST DK board.
- STMP32MP15:
- Add boot led and red led on ST DK boards.
- Add SPI1 sleep pinctrl group.
- STM32MP23:
- Add green ,orange and boot leds on ST boards.
- Add SPI, I2C, DCMIPP and CSI instances to CLUSTER_PD
power domain.
- Enable analog-filter to all I2C instances.
- STM32MP25:
- Add green ,orange and boot leds on ST boards.
- Add SPI, I2C, DCMIPP and CSI instances to CLUSTER_PD
power domain.
- Enable analog-filter to all I2C instances.
- Add LPDDR/DDR channels to ST boards.
* tag 'stm32-dt-for-v6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits)
arm/arm64: dts: st: Drop unused .dtsi
arm64: STM32: drop an undefined Kconfig symbol
arm64: dts: st: Minor whitespace cleanup
arm64: dts: st: Use hyphen in node names
arm64: dts: st: add power-domain of dcmipp in stm32mp231.dtsi
arm64: dts: st: add power-domain of dcmipp in stm32mp251.dtsi
dt-bindings: media: st: dcmipp: add 'power-domains' property
arm64: dts: st: add power-domain of csi in stm32mp231.dtsi
arm64: dts: st: add power-domain of csi in stm32mp251.dtsi
dt-bindings: media: st: csi: add 'power-domains' property
ARM: dts: stm32: add spi1 sleep state pinctrl on stm32mp157c-ev1
arm64: dts: st: add DDR channel to stm32mp257f-ev1 board
arm64: dts: st: add LPDDR channel to stm32mp257f-dk board
arm64: dts: st: enable i2c analog-filter in stm32mp231.dtsi
arm64: dts: st: enable i2c analog-filter in stm32mp251.dtsi
arm64: dts: st: add power-domains in all i2c of stm32mp231.dtsi
arm64: dts: st: add power-domains in all i2c of stm32mp251.dtsi
dt-bindings: i2c: st,stm32-i2c: add 'power-domains' property
arm64: dts: st: add power-domains in all spi of stm32mp231.dtsi
arm64: dts: st: add power-domains in all spi of stm32mp251.dtsi
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 I2C may be in a power domain which is the case for the STM32MP2x
based boards. Allow a single 'power-domains' entry for STM32 I2C.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-stm32-i2c-mp2x-dt-updates-v1-1-2738a05a7af8@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add compatible string for MT8189 SoC.
Its multiple I2C controller instances are compatible with the ones
found in the MT8188 SoC.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The brcm,iproc-nic-i2c variant has 2 reg entries.
The second one is related to the brcm,ape-hsls-addr-mask property, but it's
not clear what a proper description would be.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The I2C controller requires a reset to ensure it starts from a clean state.
Add the 'resets' property to support this hardware requirement.
Signed-off-by: Encrow Thorne <jyc0019@gmail.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251230150653.42097-1-jyc0019@gmail.com
Add compatible string for the DesignWare-based I2C controllers present
in Mobileye Eyeq6Lplus SoC, with a fallback to the default compatible.
The same controllers are also present in the EyeQ7H, so add a compatible
for those with a fallback to the Eyeq6Lplus compatible.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251126-i2c-dw-v4-1-b0654598e7c5@bootlin.com
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal,
amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell
AP80x System Controller, Marvell CP110 System Controller,
cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data() helpers
and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the code
to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in
a parent node) on nodes without an interrupt. This matches the spec
description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI
-----BEGIN PGP SIGNATURE-----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=ZM/+
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The i2c controller in the RK3506 is compatible to the variant first found
in the RK3399 SoC, so add the RK3506 to that variant list.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251021222853.193224-1-heiko@sntech.de
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Convert the Devicetree binding documentation for hisilicon,hix5hd2-i2c
from plain text to DT binding schema.
Signed-off-by: Kael D'Alcamo <dev@kael-k.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
rtl9300 updates:
- general cleanups
- implemented block read/write support
- added RTL9310 support
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaODwWBYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uImgBAI02eSJcQVGieLrmpAY9hfmNH3aw
Z12LEAhFh5f4+SfOAP4xS3eS1gwqGL0Qv13qEy26v9qJNsqC7DvizkpIPy3KDA==
=wc3P
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.18-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.18, part 2
rtl9300 updates:
- general cleanups
- implemented block read/write support
- added RTL9310 support
Adjust the regex for child-node address to account for the fact that
RTL9310 supports 12 instead of only 8 SDA lines. Also, narrow this per
variant.
Add a vendor-specific property to explicitly specify the SCL line number
of the defined I2C controller/master. This is required, in particular
for RTL9310, to operate on the correct SCL for each controller. Require
this property to be specified for RTL9310.
Add compatibles for known SoC variants RTL9311, RTL9312 and RTL9313.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-9-jelonek.jonas@gmail.com
Fix wording of binding description to use plural because there is not
only a single RTL9300 SoC. RTL9300 describes a whole family of Realtek
SoCs.
Add missing word 'of' in description of reg property.
Change 'SDA pin' to 'SDA line number' because the property must contain
the SDA (channel) number ranging from 0-7 instead of a real pin number.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-3-jelonek.jonas@gmail.com
-----BEGIN PGP SIGNATURE-----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=Fuey
-----END PGP SIGNATURE-----
Merge tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Added a new V4L2 clock helper
- New camera sensor drivers
- iris: Enable H.264/H.265 encoder support and fixes in iris driver
common code
- camss: add support for new SoC flavors
- venus: add new SoC support
- tc358743: support more infoframe types
- Various fixes, driver improvements and cleanups
* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
media: venus: pm_helpers: add fallback for the opp-table
media: qcom: camss: vfe: Fix BPL alignment for QCM2290
media: tuner: xc5000: Fix use-after-free in xc5000_release
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
media: vsp1: Export missing vsp1_isp_free_buffer symbol
media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
media: renesas: ceu: Convert to RUNTIME_PM_OPS()
media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
media: uvcvideo: Shorten the transfer size non compliance message
media: uvcvideo: Do not re-reference dev->udev
media: uvcvideo: Use intf instead of udev for printks
media: uvcvideo: Move video_device under video_queue
media: uvcvideo: Drop stream->mutex
media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
...
Lots of platform specific updates for Qualcomm SoCs, including a
new TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with the
M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed, Broadcom,
Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0.
-----BEGIN PGP SIGNATURE-----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=mcZR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation of
high-end workstations and laptops from Apple. Linux has been working
on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that
was part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences
being mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial bedded
SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and Axis
ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon
X1 chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into
improving hardware support on the existing machines and cleaning
up contents for validation.
-----BEGIN PGP SIGNATURE-----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=9OtD
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
Mostly DT bindings additions this time because Andi was super busy and I
also could only partly cover it.
- new ids for qcom-cci, mt65xx, exynos5, apple, tegra20, k1, i801
- drop support for already removed S3C2410
- introduce and use fwnode_for_each_child_node_scoped()
- mmt65xx: improve write-then-read transactions
- k1: various fixes around bus errors and resets
- usual share of cleanups, minor improvements, PM fixes...
at24 updates
- add the compatible for Giantec GT24C256C to the device-tree bindings
-----BEGIN PGP SIGNATURE-----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=LsC5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Mostly DT bindings additions this time because Andi was super busy and
I also could only partly cover it.
- new ids for qcom-cci, mt65xx, exynos5, apple, tegra20, k1, i801
- drop support for already removed S3C2410
- introduce and use fwnode_for_each_child_node_scoped()
- mmt65xx: improve write-then-read transactions
- k1: various fixes around bus errors and resets
- usual share of cleanups, minor improvements, PM fixes...
at24 updates:
- add the compatible for Giantec GT24C256C to the device-tree
bindings"
* tag 'i2c-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits)
i2c: i801: Add support for Intel Wildcat Lake-U
dt-bindings: i2c: i2c-mt65xx: Add MediaTek MT8196/6991 compatibles
i2c: designware: Add disabling clocks when probe fails
i2c: designware: Fix clock issue when PM is disabled
i2c: busses: Fix some spelling errors
i2c: mux: Simplify boolean assignment in i2c_mux_alloc
i2c: designware: use dev_err_probe() when probing platform device
i2c: designware: convert to dev_err_probe() on request IRQ error
i2c: spacemit: ensure SDA is released after bus reset
i2c: spacemit: check SDA instead of SCL after bus reset
i2c: spacemit: disable SDA glitch fix to avoid restart delay
i2c: spacemit: remove stop function to avoid bus error
i2c: spacemit: ensure bus release check runs when wait_bus_idle() fails
i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD
i2c: boardinfo: Annotate code used in init phase only
dt-bindings: i2c: i2c-mt65xx: Document MediaTek MT6878 I2C
dt-bindings: i2c: samsung,s3c2410-i2c: Drop S3C2410
i2c: s3c2410: Drop S3C2410 OF support
dt-bindings: i2c: spacemit,k1-i2c: Minor whitespace cleanup in example
dt-bindings: i2c: exynos5: add samsung,exynos8890-hsi2c compatible
...
Add support for the MediaTek MT8196 Chromebook SoC and for its
close relative, the MediaTek Dimensity 9400 MT6991 SoC.
Those chips' multiple I2C controller instances are compatible with
the ones found in the MT8188 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
[wsa: rebased]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
dt-bindings:
- add support for MediaTek MT6878 I2C
- Drp[ support fpr S3C2410
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaNe9/xYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uWdwA/jaO8/KVNXt349PdX9B1D5HBQea4
jsJgi1W/5lqi0MLjAQDQHsKfa35M8RONSeVnHXS7BNdRpWQDtiHgxaks0tXmDA==
=1RHN
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.18
- Add support for MediaTek MT6878 I2C
- Drop support for S3C2410
Document the I2C controllers found in the MediaTek MT6878 SoC, by adding
a new compatible string for the controllers. Their design is compatible
with the design from the MediaTek MT8188 SoC.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250920-mt6878-i2c-bringup-v2-1-70a951f10be9@mentallysanemainliners.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Samsung S3C2410 SoC was removed from the Linux kernel in the
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of "samsung,s3c2410-i2c" compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250830103601.82046-4-krzysztof.kozlowski@linaro.org
