mirror of
https://github.com/torvalds/linux.git
synced 2026-05-26 08:02:27 +02:00
spi: airoha: set custom sector size equal to flash page size
Set custom sector size equal to flash page size including oob. Thus we will always read a single sector. The maximum custom sector size is 8187, so all possible flash sector sizes are supported. This patch is a necessary step to avoid reading flash page settings from SNFI registers during driver startup. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20251012121707.2296160-12-mikhail.kshevetskiy@iopsys.eu Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
d1ff30df1d
commit
fb81b5cecb
|
|
@ -519,7 +519,7 @@ static int airoha_snand_nfi_config(struct airoha_snand_ctrl *as_ctrl)
|
|||
return err;
|
||||
|
||||
/* sec num */
|
||||
val = FIELD_PREP(SPI_NFI_SEC_NUM, as_ctrl->nfi_cfg.sec_num);
|
||||
val = FIELD_PREP(SPI_NFI_SEC_NUM, 1);
|
||||
err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
|
||||
SPI_NFI_SEC_NUM, val);
|
||||
if (err)
|
||||
|
|
@ -532,7 +532,8 @@ static int airoha_snand_nfi_config(struct airoha_snand_ctrl *as_ctrl)
|
|||
return err;
|
||||
|
||||
/* set cust sec size */
|
||||
val = FIELD_PREP(SPI_NFI_CUS_SEC_SIZE, as_ctrl->nfi_cfg.sec_size);
|
||||
val = FIELD_PREP(SPI_NFI_CUS_SEC_SIZE,
|
||||
as_ctrl->nfi_cfg.sec_size * as_ctrl->nfi_cfg.sec_num);
|
||||
return regmap_update_bits(as_ctrl->regmap_nfi,
|
||||
REG_SPI_NFI_SECCUS_SIZE,
|
||||
SPI_NFI_CUS_SEC_SIZE, val);
|
||||
|
|
@ -635,10 +636,13 @@ static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc,
|
|||
u8 *txrx_buf = spi_get_ctldata(spi);
|
||||
dma_addr_t dma_addr;
|
||||
u32 val, rd_mode, opcode;
|
||||
size_t bytes;
|
||||
int err;
|
||||
|
||||
as_ctrl = spi_controller_get_devdata(spi->controller);
|
||||
|
||||
bytes = as_ctrl->nfi_cfg.sec_num * as_ctrl->nfi_cfg.sec_size;
|
||||
|
||||
/*
|
||||
* DUALIO and QUADIO opcodes are not supported by the spi controller,
|
||||
* replace them with supported opcodes.
|
||||
|
|
@ -697,18 +701,17 @@ static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc,
|
|||
goto error_dma_mode_off;
|
||||
|
||||
/* Set number of sector will be read */
|
||||
val = FIELD_PREP(SPI_NFI_SEC_NUM, as_ctrl->nfi_cfg.sec_num);
|
||||
err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
|
||||
SPI_NFI_SEC_NUM, val);
|
||||
SPI_NFI_SEC_NUM,
|
||||
FIELD_PREP(SPI_NFI_SEC_NUM, 1));
|
||||
if (err)
|
||||
goto error_dma_mode_off;
|
||||
|
||||
/* Set custom sector size */
|
||||
val = as_ctrl->nfi_cfg.sec_size;
|
||||
err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_SECCUS_SIZE,
|
||||
SPI_NFI_CUS_SEC_SIZE |
|
||||
SPI_NFI_CUS_SEC_SIZE_EN,
|
||||
FIELD_PREP(SPI_NFI_CUS_SEC_SIZE, val) |
|
||||
FIELD_PREP(SPI_NFI_CUS_SEC_SIZE, bytes) |
|
||||
SPI_NFI_CUS_SEC_SIZE_EN);
|
||||
if (err)
|
||||
goto error_dma_mode_off;
|
||||
|
|
@ -733,11 +736,10 @@ static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc,
|
|||
* = NFI_SNF_MISC_CTL2.read_data_byte_number =
|
||||
* = NFI_CON.sector_number * NFI_SECCUS.custom_sector_size
|
||||
*/
|
||||
val = as_ctrl->nfi_cfg.sec_size * as_ctrl->nfi_cfg.sec_num;
|
||||
val = FIELD_PREP(SPI_NFI_READ_DATA_BYTE_NUM, val);
|
||||
err = regmap_update_bits(as_ctrl->regmap_nfi,
|
||||
REG_SPI_NFI_SNF_MISC_CTL2,
|
||||
SPI_NFI_READ_DATA_BYTE_NUM, val);
|
||||
SPI_NFI_READ_DATA_BYTE_NUM,
|
||||
FIELD_PREP(SPI_NFI_READ_DATA_BYTE_NUM, bytes));
|
||||
if (err)
|
||||
goto error_dma_unmap;
|
||||
|
||||
|
|
@ -826,10 +828,13 @@ static ssize_t airoha_snand_dirmap_write(struct spi_mem_dirmap_desc *desc,
|
|||
struct airoha_snand_ctrl *as_ctrl;
|
||||
dma_addr_t dma_addr;
|
||||
u32 wr_mode, val, opcode;
|
||||
size_t bytes;
|
||||
int err;
|
||||
|
||||
as_ctrl = spi_controller_get_devdata(spi->controller);
|
||||
|
||||
bytes = as_ctrl->nfi_cfg.sec_num * as_ctrl->nfi_cfg.sec_size;
|
||||
|
||||
opcode = desc->info.op_tmpl.cmd.opcode;
|
||||
switch (opcode) {
|
||||
case SPI_NAND_OP_PROGRAM_LOAD_SINGLE:
|
||||
|
|
@ -880,18 +885,17 @@ static ssize_t airoha_snand_dirmap_write(struct spi_mem_dirmap_desc *desc,
|
|||
goto error_dma_mode_off;
|
||||
|
||||
/* Set number of sector will be written */
|
||||
val = FIELD_PREP(SPI_NFI_SEC_NUM, as_ctrl->nfi_cfg.sec_num);
|
||||
err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
|
||||
SPI_NFI_SEC_NUM, val);
|
||||
SPI_NFI_SEC_NUM,
|
||||
FIELD_PREP(SPI_NFI_SEC_NUM, 1));
|
||||
if (err)
|
||||
goto error_dma_mode_off;
|
||||
|
||||
/* Set custom sector size */
|
||||
val = as_ctrl->nfi_cfg.sec_size;
|
||||
err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_SECCUS_SIZE,
|
||||
SPI_NFI_CUS_SEC_SIZE |
|
||||
SPI_NFI_CUS_SEC_SIZE_EN,
|
||||
FIELD_PREP(SPI_NFI_CUS_SEC_SIZE, val) |
|
||||
FIELD_PREP(SPI_NFI_CUS_SEC_SIZE, bytes) |
|
||||
SPI_NFI_CUS_SEC_SIZE_EN);
|
||||
if (err)
|
||||
goto error_dma_mode_off;
|
||||
|
|
@ -916,11 +920,10 @@ static ssize_t airoha_snand_dirmap_write(struct spi_mem_dirmap_desc *desc,
|
|||
* = NFI_SNF_MISC_CTL2.write_data_byte_number =
|
||||
* = NFI_CON.sector_number * NFI_SECCUS.custom_sector_size
|
||||
*/
|
||||
val = as_ctrl->nfi_cfg.sec_size * as_ctrl->nfi_cfg.sec_num;
|
||||
val = FIELD_PREP(SPI_NFI_PROG_LOAD_BYTE_NUM, val);
|
||||
err = regmap_update_bits(as_ctrl->regmap_nfi,
|
||||
REG_SPI_NFI_SNF_MISC_CTL2,
|
||||
SPI_NFI_PROG_LOAD_BYTE_NUM, val);
|
||||
SPI_NFI_PROG_LOAD_BYTE_NUM,
|
||||
FIELD_PREP(SPI_NFI_PROG_LOAD_BYTE_NUM, bytes));
|
||||
if (err)
|
||||
goto error_dma_unmap;
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user