arm64: dts: qcom: glymur: Add Asus Zenbook A16 (UX3607OA)

UX3607OA is a variant of the Asus Zenbook A16 built on the Qualcomm
Glymur platform. It comes with an 18-core X2 Elite Extreme SoC, 48GiB
of RAM, NVMe storage, a 2880 x 1800 OLED screen, and the other typical
Glymur platform capabilities.

The hardware wiring is very different versus the 14" SKU - the larger
one is based on the System-In-Package reference design, unlike the
smaller one, which derives from a more common Chip-On-Board base.

Currently working:
- Audio playback (4 speakers)
- GPU, Display
- HDMI port
- Keyboard, touchpad, lid switch
- Privacy LEDs (camera-use, camera-block, mic-mute)
- Charging, Type-C, Type-A port
- Onboard SD Card slot (RTS5329)
- Wi-Fi, Bluetooth (QCC2072)
- Touchscreen should work on the SKUs that have it, but it remains
  untested due to lack of access to such a device

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260721-topic-a16_submission-v1-2-8ea213130d05@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Konrad Dybcio 2026-07-21 19:11:27 +02:00 committed by Bjorn Andersson
parent 770d144843
commit e8fbbca94d
4 changed files with 1272 additions and 2 deletions

View File

@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096sg-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += eliza-cqs-evk.dtb
dtb-$(CONFIG_ARCH_QCOM) += eliza-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += glymur-asus-zenbook-a16-ux3607oa.dtb
dtb-$(CONFIG_ARCH_QCOM) += glymur-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk.dtb

File diff suppressed because it is too large Load Diff

View File

@ -46,7 +46,7 @@ trip1 {
};
};
pmh0104-l1-thermal {
pmh0104_l1_thermal: pmh0104-l1-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pmh0104_l_e1_temp_alarm>;

View File

@ -46,7 +46,7 @@ trip1 {
};
};
pmh0110-h0-thermal {
pmh0110_h0_thermal: pmh0110-h0-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pmh0110_h_e0_temp_alarm>;