github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-05-13 00:28:54 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity

ARM: dts: imx6qdl-tqma6: add boot phase properties

Browse Source 
dtschema/schemas/bootph.yaml describe various node usage during
boot phases with DT.

TQMa6 need eMMC, I2C, GPIO, regulator and QSPI access during
boot process.

Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
This commit is contained in:
Max Merchel 2026-02-20 15:30:04 +01:00 committed by Frank Li
parent 1ea07b5a0f
commit c335bc0640
3 changed files with 14 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
View File

@ -11,6 +11,7 @@ &ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
bootph-pre-ram;
status = "okay";
m25p80: flash@0 {
@ -19,6 +20,7 @@ m25p80: flash@0 {
spi-max-frequency = <50000000>;
vcc-supply = <&sw4_reg>;
m25p,fast-read;
bootph-pre-ram;
partitions {
compatible = "fixed-partitions";
@ -28,6 +30,10 @@ partitions {
};
};
&gpio3 {
bootph-pre-ram;
};
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
@ -38,6 +44,7 @@ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
/* eCSPI1 SS1 */
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
>;
bootph-pre-ram;
};
pinctrl_i2c1: i2c1grp {
@ -45,6 +52,7 @@ pinctrl_i2c1: i2c1grp {
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
>;
bootph-pre-ram;
};
pinctrl_i2c1_recovery: i2c1recoverygrp {
@ -73,6 +81,7 @@ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>;
bootph-all;
};
};
@ -117,6 +126,7 @@ sw4_reg: sw4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
bootph-pre-ram;
};
reg_5v_600mA: swbst {
@ -186,6 +196,7 @@ &usdhc3 {
bus-width = <8>;
#address-cells = <1>;
#size-cells = <0>;
bootph-all;
status = "okay";
mmccard: mmccard@0 {

1
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
View File

@ -20,6 +20,7 @@ &i2c1 {
scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
bootph-pre-ram;
status = "okay";
pmic: pmic@8 {

2
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
View File

@ -13,6 +13,7 @@ &i2c3 {
scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
bootph-pre-ram;
status = "okay";
pmic: pmic@8 {
@ -40,6 +41,7 @@ pinctrl_i2c3: i2c3grp {
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
>;
bootph-pre-ram;
};
pinctrl_i2c3_recovery: i2c3recoverygrp {