diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
index 07492f63a1f8..14676d1d905a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
@@ -11,6 +11,7 @@ &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	bootph-pre-ram;
 	status = "okay";
 
 	m25p80: flash@0 {
@@ -19,6 +20,7 @@ m25p80: flash@0 {
 		spi-max-frequency = <50000000>;
 		vcc-supply = <&sw4_reg>;
 		m25p,fast-read;
+		bootph-pre-ram;
 
 		partitions {
 			compatible = "fixed-partitions";
@@ -28,6 +30,10 @@ partitions {
 	};
 };
 
+&gpio3 {
+	bootph-pre-ram;
+};
+
 &iomuxc {
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
@@ -38,6 +44,7 @@ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
 			 /* eCSPI1 SS1 */
 			MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
 		>;
+		bootph-pre-ram;
 	};
 
 	pinctrl_i2c1: i2c1grp {
@@ -45,6 +52,7 @@ pinctrl_i2c1: i2c1grp {
 			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
 			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
 		>;
+		bootph-pre-ram;
 	};
 
 	pinctrl_i2c1_recovery: i2c1recoverygrp {
@@ -73,6 +81,7 @@ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
 			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
 			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
 		>;
+		bootph-all;
 	};
 };
 
@@ -117,6 +126,7 @@ sw4_reg: sw4 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
+			bootph-pre-ram;
 		};
 
 		reg_5v_600mA: swbst {
@@ -186,6 +196,7 @@ &usdhc3 {
 	bus-width = <8>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	bootph-all;
 	status = "okay";
 
 	mmccard: mmccard@0 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
index 1251749a8dd0..67f8f59aff5a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
@@ -20,6 +20,7 @@ &i2c1 {
 	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
+	bootph-pre-ram;
 	status = "okay";
 
 	pmic: pmic@8 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
index 7f526f39e0f2..db552802554d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
@@ -13,6 +13,7 @@ &i2c3 {
 	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
+	bootph-pre-ram;
 	status = "okay";
 
 	pmic: pmic@8 {
@@ -40,6 +41,7 @@ pinctrl_i2c3: i2c3grp {
 			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
 			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
 		>;
+		bootph-pre-ram;
 	};
 
 	pinctrl_i2c3_recovery: i2c3recoverygrp {