mirror of
https://github.com/torvalds/linux.git
synced 2026-06-04 20:46:48 +02:00
New boards are the NanoPC T6, Firefly Station P2, Radxa Rock 4SE.
Many new peripherals for the still only basic supported rk3588 soc (PCIe2, PCIe3, USB2, SATA, Combo-Phys). Improvements to the Rock-5a development board based on this soc (saradc, i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card, some regulators, pmic). Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata, sata, sd-card, pmic) RK3399 got the PCIe endpoint node when used as a PCIe-client. And some minor changes for some boards: spi-flash for RockPi 4, SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios on engicam and gru boards. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdRnwQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgcffB/4sR8h7IBNMN/0yUyn1ALlAZWt6K9mNQbIq 0mRMJHllMeefLL952Gsnpw3uj6mz/GKIa0H0g88giWMJOOknH/zIKyYE/9Li0WwO KFoF2KA76JQlN+Dv7qHfhv38Q996/AI6Bc1dGcU1x611/jZlbZojXqnBKvT4RyFJ rbRvD6nF8LeW6yQP1u+4wA2UnHonYJstU6bEbAf1KXofQIzcspDBzKHuQtza152F 3YVR5+yCIG4zFVSksvX5+DkJvvYYP/dkLftrh69dgYNHDcXonHYLNkR9E05kWL+/ xhH58h20b/tBonJoh2ZSNKdZSvv2w8BdCQP/SGn54YQ+8nclsnFI =g1qK -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkEAAACgkQYKtH/8kJ UifOyw/+MnuyOqhjWQrDUsxsxULVsBUn71RsYXz9jPcrZSkeD4RgyqxIlBtJkMxf xBclgRHMVr6AAnz8UNjpdSSlJFH9Kr6inoNwdpWZB9UqEfZIQb5RJnDkvgyR1CA5 BmE0Xt6usuPsDEsgvUXQVdbmQIKB7H3ZxW9Jx+gTbPcR0Ktm5EIZ0tI6B6Hq2i42 if+Bw9JrKCucsb8NAuyClslXRXHKxOZLEVuatlOpUf+tMaDF1vAmWhtc7QMQ8OWV Io7OVCQIiFo8+b8gHg6qWx5zqrjVUY55VpP/R5+5tj+vYU/+bLbmUAMbGDNi8utM WbGoXCZBBX9SBQFSQ5mp5sDwXFZR13nN4vqwkGEBdHWIeZDBvVf+og/V4KTxhpQB muQLS4OizirbOZV0mU1t/Ds5ZlrllKA3jI5fDM6HIL/tspEIxHqLgJd3Z5Og9Rn5 mzIgP+gjqc7Pl1g5KGmyu8Y5btEj/WSKNY4CBOPDCTW1TCshgP26pecp8cV+bKhe e1z7hqXL2romDinDeBVJFrNQhX2Ki/xoh6DwE7Tkf9o00aNftIBbHqeXYaJmK4Z+ jpA6ycOY4LHBfrT7Y1XWLVGPYHq/2yaYZmdWuSHmNIGVgXJEVtv0q35KPabFGQSq XkleG8IPC3XCX5OZ9xVfVwUmVVhRW9f5X9VEM4leICY1xJ0tFoY= =XITG -----END PGP SIGNATURE----- Merge tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards are the NanoPC T6, Firefly Station P2, Radxa Rock 4SE. Many new peripherals for the still only basic supported rk3588 soc (PCIe2, PCIe3, USB2, SATA, Combo-Phys). Improvements to the Rock-5a development board based on this soc (saradc, i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card, some regulators, pmic). Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata, sata, sd-card, pmic) RK3399 got the PCIe endpoint node when used as a PCIe-client. And some minor changes for some boards: spi-flash for RockPi 4, SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios on engicam and gru boards. * tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits) arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support arm64: dts: rockchip: add rk3588 PCIe2 support arm64: dts: rockchip: Enable internal SPI flash for ROCK Pi 4A/B/C arm64: dts: rockchip: Add NanoPC T6 dt-bindings: arm: rockchip: Add NanoPC T6 arm64: dts: rockchip: Enable SATA on Radxa E25 arm64: dts: rockchip: Fix PCIe regulators on Radxa E25 arm64: dts: rockchip: switch px30-engicam to enable-gpios arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios arm64: dts: rockchip: add PCIe3 support for rk3588 arm64: dts: rockchip: fix/update sdmmc properties for rock-5a and -5b arm64: dts: rockchip: add USB2 to rk3588s-rock5a arm64: dts: rockchip: add USB2 to rk3588-rock5b arm64: dts: rockchip: add USB2 to rk3588-evb1 arm64: dts: rockchip: add USB2 support for rk3588 arm64: dts: rockchip: Enable RS485 for edgeble-neu6b arm64: dts: rockchip: Enable RS232 for edgeble-neu6b arm64: dts: rockchip: Enable PWM FAN for edgeble-neu6b arm64: dts: rockchip: Enable RTC for edgeble-neu6b arm64: dts: rockchip: Enable SATA for edgeble-neu6b ... Link: https://lore.kernel.org/r/7414564.rnE6jSC6OK@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
b89c940f2a
|
|
@ -196,6 +196,11 @@ properties:
|
|||
- const: firefly,rk3566-roc-pc
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Firefly Station P2
|
||||
items:
|
||||
- const: firefly,rk3568-roc-pc
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: FriendlyElec NanoPi R2 series boards
|
||||
items:
|
||||
- enum:
|
||||
|
|
@ -222,6 +227,11 @@ properties:
|
|||
- friendlyarm,nanopi-r5s
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: FriendlyElec NanoPC T6
|
||||
items:
|
||||
- const: friendlyarm,nanopc-t6
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: GeekBuying GeekBox
|
||||
items:
|
||||
- const: geekbuying,geekbox
|
||||
|
|
@ -694,6 +704,11 @@ properties:
|
|||
- const: radxa,rock-4c-plus
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Radxa ROCK 4SE
|
||||
items:
|
||||
- const: radxa,rock-4se
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Radxa ROCK Pi E
|
||||
items:
|
||||
- const: radxa,rockpi-e
|
||||
|
|
|
|||
|
|
@ -101,6 +101,9 @@ properties:
|
|||
pattern: spd$
|
||||
# These are special cases that don't conform to the above pattern.
|
||||
# Each requires a standard at24 model as fallback.
|
||||
- items:
|
||||
- const: belling,bl24c16a
|
||||
- const: atmel,24c16
|
||||
- items:
|
||||
- enum:
|
||||
- rohm,br24g01
|
||||
|
|
|
|||
|
|
@ -190,6 +190,8 @@ patternProperties:
|
|||
description: Compass Electronics Group, LLC
|
||||
"^beagle,.*":
|
||||
description: BeagleBoard.org Foundation
|
||||
"^belling,.*":
|
||||
description: Shanghai Belling Co., Ltd.
|
||||
"^bhf,.*":
|
||||
description: Beckhoff Automation GmbH & Co. KG
|
||||
"^bitmain,.*":
|
||||
|
|
|
|||
|
|
@ -58,6 +58,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4c-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4se.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
|
||||
|
|
@ -94,10 +95,12 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
|
||||
|
|
|
|||
|
|
@ -26,5 +26,5 @@ &sdio_pwrseq {
|
|||
};
|
||||
|
||||
&vcc3v3_btreg {
|
||||
enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -39,5 +39,5 @@ &sdio_pwrseq {
|
|||
};
|
||||
|
||||
&vcc3v3_btreg {
|
||||
enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -250,7 +250,7 @@ ppvar_sd_card_io: ppvar-sd-card-io {
|
|||
pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
|
||||
|
||||
enable-active-high;
|
||||
enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
|
||||
states = <1800000 0x1>,
|
||||
<3000000 0x0>;
|
||||
|
|
|
|||
65
arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
Normal file
65
arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
Normal file
|
|
@ -0,0 +1,65 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
|
||||
* Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399-rock-pi-4.dtsi"
|
||||
#include "rk3399-t-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK 4SE";
|
||||
compatible = "radxa,rock-4se", "rockchip,rk3399";
|
||||
|
||||
aliases {
|
||||
mmc2 = &sdio0;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4345c5";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <1500000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&vcc5v0_host {
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
};
|
||||
|
|
@ -9,7 +9,6 @@
|
|||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
|
|
|
|||
|
|
@ -6,8 +6,19 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include "rk3399-rock-pi-4.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK Pi 4A";
|
||||
compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include "rk3399-rock-pi-4.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK Pi 4B";
|
||||
|
|
@ -30,6 +31,16 @@ brcmf: wifi@1 {
|
|||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
|
||||
|
|
|
|||
|
|
@ -7,6 +7,7 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include "rk3399-rock-pi-4.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK Pi 4C";
|
||||
|
|
@ -42,6 +43,16 @@ &sound {
|
|||
hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
|
||||
|
|
|
|||
|
|
@ -265,6 +265,33 @@ pcie0_intc: interrupt-controller {
|
|||
};
|
||||
};
|
||||
|
||||
pcie0_ep: pcie-ep@f8000000 {
|
||||
compatible = "rockchip,rk3399-pcie-ep";
|
||||
reg = <0x0 0xfd000000 0x0 0x1000000>,
|
||||
<0x0 0xfa000000 0x0 0x2000000>;
|
||||
reg-names = "apb-base", "mem-base";
|
||||
clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
|
||||
<&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
|
||||
clock-names = "aclk", "aclk-perf",
|
||||
"hclk", "pm";
|
||||
max-functions = /bits/ 8 <8>;
|
||||
num-lanes = <4>;
|
||||
resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
|
||||
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
|
||||
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
|
||||
<&cru SRST_A_PCIE>;
|
||||
reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
|
||||
"pm", "pclk", "aclk";
|
||||
phys = <&pcie_phy 0>, <&pcie_phy 1>,
|
||||
<&pcie_phy 2>, <&pcie_phy 3>;
|
||||
phy-names = "pcie-phy-0", "pcie-phy-1",
|
||||
"pcie-phy-2", "pcie-phy-3";
|
||||
rockchip,max-outbound-regions = <32>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_clkreqnb_cpm>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gmac: ethernet@fe300000 {
|
||||
compatible = "rockchip,rk3399-gmac";
|
||||
reg = <0x0 0xfe300000 0x0 0x10000>;
|
||||
|
|
|
|||
|
|
@ -47,6 +47,9 @@ vbus_typec: vbus-typec-regulator {
|
|||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
/* actually fed by vcc5v0_sys, dependent
|
||||
* on pi6c clock generator
|
||||
*/
|
||||
vcc3v3_minipcie: vcc3v3-minipcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
|
|
@ -54,9 +57,9 @@ vcc3v3_minipcie: vcc3v3-minipcie-regulator {
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&minipcie_enable_h>;
|
||||
regulator-name = "vcc3v3_minipcie";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_pi6c_05>;
|
||||
};
|
||||
|
||||
vcc3v3_ngff: vcc3v3-ngff-regulator {
|
||||
|
|
@ -71,9 +74,6 @@ vcc3v3_ngff: vcc3v3-ngff-regulator {
|
|||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
/* actually fed by vcc5v0_sys, dependent
|
||||
* on pi6c clock generator
|
||||
*/
|
||||
vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
|
|
@ -83,7 +83,7 @@ vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
|
|||
regulator-name = "vcc3v3_pcie30x1";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_pi6c_05>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
|
||||
|
|
@ -99,6 +99,10 @@ vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
|
|||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
phy-supply = <&vcc3v3_pcie30x1>;
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20_reset_h>;
|
||||
|
|
@ -117,7 +121,7 @@ &pcie3x1 {
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie30x1m0_pins>;
|
||||
reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30x1>;
|
||||
vpcie3v3-supply = <&vcc3v3_minipcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -178,6 +182,10 @@ &pwm12 {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sata1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
|
|
|
|||
643
arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts
Normal file
643
arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts
Normal file
|
|
@ -0,0 +1,643 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Firefly Station P2";
|
||||
compatible = "firefly,rk3568-roc-pc", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
dc_12v: dc-12v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
gmac0_clkin: external-gmac0-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac0_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
gmac1_clkin: external-gmac1-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac1_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-user {
|
||||
label = "user-led";
|
||||
default-state = "on";
|
||||
gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_led_enable_h>;
|
||||
retain-state-suspended;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pcie30_avdd0v9: pcie30-avdd0v9-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
pcie30_avdd1v8: pcie30-avdd1v8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v3_pcie_en_pin>;
|
||||
gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: vcc5v0-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_otg";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_otg_en>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0 {
|
||||
/* used for USB3 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
/* used for USB3 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
/* used for SATA */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&gmac0_clkin>;
|
||||
clock_in_out = "input";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus
|
||||
&gmac0_clkinout>;
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
phy-mode = "rgmii";
|
||||
snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
tx_delay = <0x3c>;
|
||||
rx_delay = <0x2f>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
|
||||
clock_in_out = "input";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_rgmii_bus
|
||||
&gmac1m1_clkinout>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii";
|
||||
snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
tx_delay = <0x4f>;
|
||||
rx_delay = <0x26>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
wakeup-source;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_reset_pin>;
|
||||
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
user_led_enable_h: user-led-enable-h {
|
||||
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_otg_en: vcc5v0-otg-en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie_reset_pin: pcie-reset-pin {
|
||||
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -25,7 +25,6 @@ &sdhci {
|
|||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -21,7 +21,73 @@ chosen {
|
|||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* FAN */
|
||||
&pwm2 {
|
||||
pinctrl-0 = <&pwm2m1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* RS232 */
|
||||
&uart6 {
|
||||
pinctrl-0 = <&uart6m0_xfer>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* RS485 */
|
||||
&uart7 {
|
||||
pinctrl-0 = <&uart7m2_xfer>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -18,6 +18,42 @@ vcc12v_dcin: vcc12v-dcin-regulator {
|
|||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
|
|
@ -25,8 +61,329 @@ &sdhci {
|
|||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-name = "vdd_log_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-init-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-name = "pldo6_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -38,6 +38,20 @@ vcc12v_dcin: vcc12v-dcin-regulator {
|
|||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
|
|
@ -47,6 +61,30 @@ vcc5v0_sys: vcc5v0-sys-regulator {
|
|||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usbdcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usbdcin>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
|
|
@ -138,6 +176,12 @@ hym8563_int: hym8563-int {
|
|||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
|
|
@ -149,7 +193,6 @@ &sdhci {
|
|||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
|
|
@ -760,7 +803,45 @@ regulator-state-mem {
|
|||
};
|
||||
};
|
||||
|
||||
&sata0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
888
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
Normal file
888
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
Normal file
|
|
@ -0,0 +1,888 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2023 Thomas McKahan
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
model = "FriendlyElec NanoPC-T6";
|
||||
compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sys_led: led-0 {
|
||||
gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
label = "system-led";
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sys_led_pin>;
|
||||
};
|
||||
|
||||
usr_led: led-1 {
|
||||
gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
label = "user-led";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usr_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
|
||||
simple-audio-card,name = "realtek,rt5616-codec";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
|
||||
simple-audio-card,hp-pin-name = "Headphones";
|
||||
|
||||
simple-audio-card,widgets =
|
||||
"Headphone", "Headphones",
|
||||
"Microphone", "Microphone Jack";
|
||||
simple-audio-card,routing =
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR",
|
||||
"MIC1", "Microphone Jack",
|
||||
"Microphone Jack", "micbias1";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rt5616>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
/* vcc5v0_sys powers peripherals */
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
/* vcc4v0_sys powers the RK806, RK860's */
|
||||
vcc4v0_sys: vcc4v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc4v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <4000000>;
|
||||
regulator-max-microvolt = <4000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc-1v1-nldo-s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
};
|
||||
|
||||
vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3_pcie20";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vbus5v0_typec: vbus5v0-typec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&typec5v_pwren>;
|
||||
regulator-name = "vbus5v0_typec";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_m2_0_pwren>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_b0{
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1{
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2{
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3{
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
gpio-line-names = /* GPIO0 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 C0-C7 */
|
||||
"", "", "", "",
|
||||
"HEADER_10", "HEADER_08", "HEADER_32", "",
|
||||
/* GPIO0 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names = /* GPIO1 A0-A7 */
|
||||
"HEADER_27", "HEADER_28", "", "",
|
||||
"", "", "", "HEADER_15",
|
||||
/* GPIO1 B0-B7 */
|
||||
"HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23",
|
||||
"HEADER_24", "HEADER_22", "", "",
|
||||
/* GPIO1 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO1 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "HEADER_05", "HEADER_03";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
gpio-line-names = /* GPIO2 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO2 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO2 C0-C7 */
|
||||
"", "CSI1_11", "CSI1_12", "",
|
||||
"", "", "", "",
|
||||
/* GPIO2 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
gpio-line-names = /* GPIO3 A0-A7 */
|
||||
"HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36",
|
||||
"HEADER_37", "", "DSI0_12", "",
|
||||
/* GPIO3 B0-B7 */
|
||||
"HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16",
|
||||
"HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12",
|
||||
/* GPIO3 C0-C7 */
|
||||
"DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13",
|
||||
"", "", "", "",
|
||||
/* GPIO3 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "DSI1_10", "", "";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
gpio-line-names = /* GPIO4 A0-A7 */
|
||||
"DSI1_08", "DSI1_14", "", "DSI1_12",
|
||||
"", "", "", "",
|
||||
/* GPIO4 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO4 C0-C7 */
|
||||
"", "", "", "",
|
||||
"CSI0_11", "CSI0_12", "", "",
|
||||
/* GPIO4 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
rockchip,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
clock-frequency = <200000>;
|
||||
status = "okay";
|
||||
|
||||
fusb302: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&usbc0_int>;
|
||||
pinctrl-names = "default";
|
||||
vbus-supply = <&vbus5v0_typec>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
data-role = "dual";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
op-sink-microwatt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
clock-frequency = <200000>;
|
||||
status = "okay";
|
||||
|
||||
rt5616: codec@1b {
|
||||
compatible = "realtek,rt5616";
|
||||
reg = <0x1b>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
#sound-dai-cells = <0>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
|
||||
port {
|
||||
rt5616_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s0_8ch_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* connected with MIPI-CSI1 */
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
pinctrl-0 = <&i2c8m2_xfer>;
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
|
||||
i2s0_8ch_p0: port {
|
||||
i2s0_8ch_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&rt5616_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l0 {
|
||||
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc_3v3_pcie20>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_0_rst>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc_3v3_pcie20>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_2_rst>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
gpio-leds {
|
||||
sys_led_pin: sys-led-pin {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usr_led_pin: usr-led-pin {
|
||||
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie2_0_rst: pcie2-0-rst {
|
||||
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_2_rst: pcie2-2-rst {
|
||||
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie_m2_0_pwren: pcie-m20-pwren {
|
||||
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
typec5v_pwren: typec5v-pwren {
|
||||
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usbc0_int: usbc0-int {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-0 = <&pwm1m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
num-cs = <1>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
vcc1-supply = <&vcc4v0_sys>;
|
||||
vcc2-supply = <&vcc4v0_sys>;
|
||||
vcc3-supply = <&vcc4v0_sys>;
|
||||
vcc4-supply = <&vcc4v0_sys>;
|
||||
vcc5-supply = <&vcc4v0_sys>;
|
||||
vcc6-supply = <&vcc4v0_sys>;
|
||||
vcc7-supply = <&vcc4v0_sys>;
|
||||
vcc8-supply = <&vcc4v0_sys>;
|
||||
vcc9-supply = <&vcc4v0_sys>;
|
||||
vcc10-supply = <&vcc4v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc4v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc4v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-init-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -11,6 +11,7 @@ / {
|
|||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
|
|
@ -18,17 +19,9 @@ chosen {
|
|||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 95 145 195 255>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
pwms = <&pwm1 0 50000 0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
sound {
|
||||
analog-sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "Analog";
|
||||
label = "rk3588-es8316";
|
||||
|
||||
widgets = "Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones";
|
||||
|
|
@ -43,6 +36,28 @@ sound {
|
|||
pinctrl-0 = <&hp_detect>;
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 95 145 195 255>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
pwms = <&pwm1 0 50000 0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
|
|
@ -201,6 +216,12 @@ hp_detect: hp-detect {
|
|||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
|
|
@ -217,7 +238,6 @@ &sdhci {
|
|||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
|
|
@ -230,6 +250,7 @@ &sdmmc {
|
|||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
|
|
@ -565,3 +586,38 @@ &uart2 {
|
|||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
/* connected to USB hub, which is powered by vcc5v0_sys */
|
||||
phy-supply = <&vcc5v0_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -7,6 +7,16 @@
|
|||
#include "rk3588-pinctrl.dtsi"
|
||||
|
||||
/ {
|
||||
pcie30_phy_grf: syscon@fd5b8000 {
|
||||
compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
|
||||
reg = <0x0 0xfd5b8000 0x0 0x10000>;
|
||||
};
|
||||
|
||||
pipe_phy1_grf: syscon@fd5c0000 {
|
||||
compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
|
||||
reg = <0x0 0xfd5c0000 0x0 0x100>;
|
||||
};
|
||||
|
||||
i2s8_8ch: i2s@fddc8000 {
|
||||
compatible = "rockchip,rk3588-i2s-tdm";
|
||||
reg = <0x0 0xfddc8000 0x0 0x1000>;
|
||||
|
|
@ -75,6 +85,159 @@ i2s10_8ch: i2s@fde00000 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie3x4: pcie@fe150000 {
|
||||
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
bus-range = <0x00 0x0f>;
|
||||
clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
|
||||
<&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
|
||||
<&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
|
||||
clock-names = "aclk_mst", "aclk_slv",
|
||||
"aclk_dbi", "pclk",
|
||||
"aux", "pipe";
|
||||
device_type = "pci";
|
||||
interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 7>;
|
||||
interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
|
||||
<0 0 0 2 &pcie3x4_intc 1>,
|
||||
<0 0 0 3 &pcie3x4_intc 2>,
|
||||
<0 0 0 4 &pcie3x4_intc 3>;
|
||||
linux,pci-domain = <0>;
|
||||
max-link-speed = <3>;
|
||||
msi-map = <0x0000 &its1 0x0000 0x1000>;
|
||||
num-lanes = <4>;
|
||||
phys = <&pcie30phy>;
|
||||
phy-names = "pcie-phy";
|
||||
power-domains = <&power RK3588_PD_PCIE>;
|
||||
ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
|
||||
<0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
|
||||
<0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
|
||||
reg = <0xa 0x40000000 0x0 0x00400000>,
|
||||
<0x0 0xfe150000 0x0 0x00010000>,
|
||||
<0x0 0xf0000000 0x0 0x00100000>;
|
||||
reg-names = "dbi", "apb", "config";
|
||||
resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
|
||||
reset-names = "pwr", "pipe";
|
||||
status = "disabled";
|
||||
|
||||
pcie3x4_intc: legacy-interrupt-controller {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie3x2: pcie@fe160000 {
|
||||
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
bus-range = <0x10 0x1f>;
|
||||
clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
|
||||
<&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
|
||||
<&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
|
||||
clock-names = "aclk_mst", "aclk_slv",
|
||||
"aclk_dbi", "pclk",
|
||||
"aux", "pipe";
|
||||
device_type = "pci";
|
||||
interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 7>;
|
||||
interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
|
||||
<0 0 0 2 &pcie3x2_intc 1>,
|
||||
<0 0 0 3 &pcie3x2_intc 2>,
|
||||
<0 0 0 4 &pcie3x2_intc 3>;
|
||||
linux,pci-domain = <1>;
|
||||
max-link-speed = <3>;
|
||||
msi-map = <0x1000 &its1 0x1000 0x1000>;
|
||||
num-lanes = <2>;
|
||||
phys = <&pcie30phy>;
|
||||
phy-names = "pcie-phy";
|
||||
power-domains = <&power RK3588_PD_PCIE>;
|
||||
ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
|
||||
<0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
|
||||
<0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
|
||||
reg = <0xa 0x40400000 0x0 0x00400000>,
|
||||
<0x0 0xfe160000 0x0 0x00010000>,
|
||||
<0x0 0xf1000000 0x0 0x00100000>;
|
||||
reg-names = "dbi", "apb", "config";
|
||||
resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
|
||||
reset-names = "pwr", "pipe";
|
||||
status = "disabled";
|
||||
|
||||
pcie3x2_intc: legacy-interrupt-controller {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie2x1l0: pcie@fe170000 {
|
||||
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
|
||||
bus-range = <0x20 0x2f>;
|
||||
clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
|
||||
<&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
|
||||
<&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
|
||||
clock-names = "aclk_mst", "aclk_slv",
|
||||
"aclk_dbi", "pclk",
|
||||
"aux", "pipe";
|
||||
device_type = "pci";
|
||||
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 7>;
|
||||
interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
|
||||
<0 0 0 2 &pcie2x1l0_intc 1>,
|
||||
<0 0 0 3 &pcie2x1l0_intc 2>,
|
||||
<0 0 0 4 &pcie2x1l0_intc 3>;
|
||||
linux,pci-domain = <2>;
|
||||
max-link-speed = <2>;
|
||||
msi-map = <0x2000 &its0 0x2000 0x1000>;
|
||||
num-lanes = <1>;
|
||||
phys = <&combphy1_ps PHY_TYPE_PCIE>;
|
||||
phy-names = "pcie-phy";
|
||||
power-domains = <&power RK3588_PD_PCIE>;
|
||||
ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
|
||||
<0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
|
||||
<0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
|
||||
reg = <0xa 0x40800000 0x0 0x00400000>,
|
||||
<0x0 0xfe170000 0x0 0x00010000>,
|
||||
<0x0 0xf2000000 0x0 0x00100000>;
|
||||
reg-names = "dbi", "apb", "config";
|
||||
resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
|
||||
reset-names = "pwr", "pipe";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
status = "disabled";
|
||||
|
||||
pcie2x1l0_intc: legacy-interrupt-controller {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac0: ethernet@fe1b0000 {
|
||||
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
|
||||
reg = <0x0 0xfe1b0000 0x0 0x10000>;
|
||||
|
|
@ -123,4 +286,56 @@ gmac0_mtl_tx_setup: tx-queues-config {
|
|||
queue1 {};
|
||||
};
|
||||
};
|
||||
|
||||
sata1: sata@fe220000 {
|
||||
compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
|
||||
reg = <0 0xfe220000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
|
||||
<&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
|
||||
<&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
|
||||
clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
|
||||
ports-implemented = <0x1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
sata-port@0 {
|
||||
reg = <0>;
|
||||
hba-port-cap = <HBA_PORT_FBSCP>;
|
||||
phys = <&combphy1_ps PHY_TYPE_SATA>;
|
||||
phy-names = "sata-phy";
|
||||
snps,rx-ts-max = <32>;
|
||||
snps,tx-ts-max = <32>;
|
||||
};
|
||||
};
|
||||
|
||||
combphy1_ps: phy@fee10000 {
|
||||
compatible = "rockchip,rk3588-naneng-combphy";
|
||||
reg = <0x0 0xfee10000 0x0 0x100>;
|
||||
clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
|
||||
<&cru PCLK_PHP_ROOT>;
|
||||
clock-names = "ref", "apb", "pipe";
|
||||
assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
|
||||
assigned-clock-rates = <100000000>;
|
||||
#phy-cells = <1>;
|
||||
resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
|
||||
reset-names = "phy", "apb";
|
||||
rockchip,pipe-grf = <&php_grf>;
|
||||
rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie30phy: phy@fee80000 {
|
||||
compatible = "rockchip,rk3588-pcie3-phy";
|
||||
reg = <0x0 0xfee80000 0x0 0x20000>;
|
||||
#phy-cells = <0>;
|
||||
clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
|
||||
clock-names = "pclk";
|
||||
resets = <&cru SRST_PCIE30_PHY>;
|
||||
reset-names = "phy";
|
||||
rockchip,pipe-grf = <&php_grf>;
|
||||
rockchip,phy-grf = <&pcie30_phy_grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -401,7 +401,6 @@ &sdhci {
|
|||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
vmmc-supply = <&vcc_3v3_s0>;
|
||||
vqmmc-supply = <&vcc_1v8_s3>;
|
||||
status = "okay";
|
||||
|
|
@ -429,7 +428,6 @@ &sdmmc {
|
|||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
|
|
|
|||
|
|
@ -25,7 +25,6 @@ &sdhci {
|
|||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3588s.dtsi"
|
||||
|
||||
|
|
@ -12,12 +13,252 @@ / {
|
|||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
analog-sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "rk3588-es8316";
|
||||
|
||||
widgets = "Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones";
|
||||
|
||||
routing = "MIC2", "Mic Jack",
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR";
|
||||
|
||||
dais = <&i2s0_8ch_p0>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&io_led>;
|
||||
|
||||
io-led {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 95 145 195 255>;
|
||||
fan-supply = <&vcc_5v0>;
|
||||
pwms = <&pwm3 0 50000 0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc_5v0: vcc-5v0-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_5v0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc_5v0_en>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
eeprom: eeprom@50 {
|
||||
compatible = "belling,bl24c16a", "atmel,24c16";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5m2_xfer>;
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
es8316: audio-codec@11 {
|
||||
compatible = "everest,es8316";
|
||||
reg = <0x11>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
port {
|
||||
es8316_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s0_8ch_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
|
||||
i2s0_8ch_p0: port {
|
||||
i2s0_8ch_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&es8316_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
|
|
@ -49,11 +290,62 @@ rgmii_phy1: ethernet-phy@1 {
|
|||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
io_led: io-led {
|
||||
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
power {
|
||||
vcc_5v0_en: vcc-5v0-en {
|
||||
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
rtl8211f {
|
||||
rtl8211f_rst: rtl8211f-rst {
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifibt {
|
||||
wl_reset: wl-reset {
|
||||
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
wl_dis: wl-dis {
|
||||
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
|
||||
wl_wake_host: wl-wake-host {
|
||||
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
bt_dis: bt-dis {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
|
||||
bt_wake_host: bt-wake-host {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm3m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
|
|
@ -61,13 +353,384 @@ &sdhci {
|
|||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s0>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
spi-max-frequency = <1000000>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-name = "vdd_log_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-name = "pldo6_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
status = "okay";
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl_reset &wl_dis &wl_wake_host &bt_dis &bt_wake_host>;
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -8,6 +8,8 @@
|
|||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/power/rk3588-power.h>
|
||||
#include <dt-bindings/reset/rockchip,rk3588-cru.h>
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
#include <dt-bindings/ata/ahci.h>
|
||||
|
||||
/ {
|
||||
compatible = "rockchip,rk3588";
|
||||
|
|
@ -397,6 +399,50 @@ scmi_shmem: sram@0 {
|
|||
};
|
||||
};
|
||||
|
||||
usb_host0_ehci: usb@fc800000 {
|
||||
compatible = "rockchip,rk3588-ehci", "generic-ehci";
|
||||
reg = <0x0 0xfc800000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
|
||||
phys = <&u2phy2_host>;
|
||||
phy-names = "usb";
|
||||
power-domains = <&power RK3588_PD_USB>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_host0_ohci: usb@fc840000 {
|
||||
compatible = "rockchip,rk3588-ohci", "generic-ohci";
|
||||
reg = <0x0 0xfc840000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
|
||||
phys = <&u2phy2_host>;
|
||||
phy-names = "usb";
|
||||
power-domains = <&power RK3588_PD_USB>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_host1_ehci: usb@fc880000 {
|
||||
compatible = "rockchip,rk3588-ehci", "generic-ehci";
|
||||
reg = <0x0 0xfc880000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
|
||||
phys = <&u2phy3_host>;
|
||||
phy-names = "usb";
|
||||
power-domains = <&power RK3588_PD_USB>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_host1_ohci: usb@fc8c0000 {
|
||||
compatible = "rockchip,rk3588-ohci", "generic-ohci";
|
||||
reg = <0x0 0xfc8c0000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
|
||||
phys = <&u2phy3_host>;
|
||||
phy-names = "usb";
|
||||
power-domains = <&power RK3588_PD_USB>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sys_grf: syscon@fd58c000 {
|
||||
compatible = "rockchip,rk3588-sys-grf", "syscon";
|
||||
reg = <0x0 0xfd58c000 0x0 0x1000>;
|
||||
|
|
@ -407,6 +453,66 @@ php_grf: syscon@fd5b0000 {
|
|||
reg = <0x0 0xfd5b0000 0x0 0x1000>;
|
||||
};
|
||||
|
||||
pipe_phy0_grf: syscon@fd5bc000 {
|
||||
compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
|
||||
reg = <0x0 0xfd5bc000 0x0 0x100>;
|
||||
};
|
||||
|
||||
pipe_phy2_grf: syscon@fd5c4000 {
|
||||
compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
|
||||
reg = <0x0 0xfd5c4000 0x0 0x100>;
|
||||
};
|
||||
|
||||
usb2phy2_grf: syscon@fd5d8000 {
|
||||
compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
|
||||
reg = <0x0 0xfd5d8000 0x0 0x4000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
u2phy2: usb2-phy@8000 {
|
||||
compatible = "rockchip,rk3588-usb2phy";
|
||||
reg = <0x8000 0x10>;
|
||||
interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
|
||||
reset-names = "phy", "apb";
|
||||
clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
|
||||
clock-names = "phyclk";
|
||||
clock-output-names = "usb480m_phy2";
|
||||
#clock-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
u2phy2_host: host-port {
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb2phy3_grf: syscon@fd5dc000 {
|
||||
compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
|
||||
reg = <0x0 0xfd5dc000 0x0 0x4000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
u2phy3: usb2-phy@c000 {
|
||||
compatible = "rockchip,rk3588-usb2phy";
|
||||
reg = <0xc000 0x10>;
|
||||
interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
|
||||
reset-names = "phy", "apb";
|
||||
clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
|
||||
clock-names = "phyclk";
|
||||
clock-output-names = "usb480m_phy3";
|
||||
#clock-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
u2phy3_host: host-port {
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ioc: syscon@fd5f0000 {
|
||||
compatible = "rockchip,rk3588-ioc", "syscon";
|
||||
reg = <0x0 0xfd5f0000 0x0 0x10000>;
|
||||
|
|
@ -1121,6 +1227,108 @@ qos_vop_m1: qos@fdf82200 {
|
|||
reg = <0x0 0xfdf82200 0x0 0x20>;
|
||||
};
|
||||
|
||||
pcie2x1l1: pcie@fe180000 {
|
||||
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
|
||||
bus-range = <0x30 0x3f>;
|
||||
clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>,
|
||||
<&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>,
|
||||
<&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>;
|
||||
clock-names = "aclk_mst", "aclk_slv",
|
||||
"aclk_dbi", "pclk",
|
||||
"aux", "pipe";
|
||||
device_type = "pci";
|
||||
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 7>;
|
||||
interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>,
|
||||
<0 0 0 2 &pcie2x1l1_intc 1>,
|
||||
<0 0 0 3 &pcie2x1l1_intc 2>,
|
||||
<0 0 0 4 &pcie2x1l1_intc 3>;
|
||||
linux,pci-domain = <3>;
|
||||
max-link-speed = <2>;
|
||||
msi-map = <0x3000 &its0 0x3000 0x1000>;
|
||||
num-lanes = <1>;
|
||||
phys = <&combphy2_psu PHY_TYPE_PCIE>;
|
||||
phy-names = "pcie-phy";
|
||||
power-domains = <&power RK3588_PD_PCIE>;
|
||||
ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>,
|
||||
<0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>,
|
||||
<0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>;
|
||||
reg = <0xa 0x40c00000 0x0 0x00400000>,
|
||||
<0x0 0xfe180000 0x0 0x00010000>,
|
||||
<0x0 0xf3000000 0x0 0x00100000>;
|
||||
reg-names = "dbi", "apb", "config";
|
||||
resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>;
|
||||
reset-names = "pwr", "pipe";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
status = "disabled";
|
||||
|
||||
pcie2x1l1_intc: legacy-interrupt-controller {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie2x1l2: pcie@fe190000 {
|
||||
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
|
||||
bus-range = <0x40 0x4f>;
|
||||
clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>,
|
||||
<&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>,
|
||||
<&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>;
|
||||
clock-names = "aclk_mst", "aclk_slv",
|
||||
"aclk_dbi", "pclk",
|
||||
"aux", "pipe";
|
||||
device_type = "pci";
|
||||
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 7>;
|
||||
interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>,
|
||||
<0 0 0 2 &pcie2x1l2_intc 1>,
|
||||
<0 0 0 3 &pcie2x1l2_intc 2>,
|
||||
<0 0 0 4 &pcie2x1l2_intc 3>;
|
||||
linux,pci-domain = <4>;
|
||||
max-link-speed = <2>;
|
||||
msi-map = <0x4000 &its0 0x4000 0x1000>;
|
||||
num-lanes = <1>;
|
||||
phys = <&combphy0_ps PHY_TYPE_PCIE>;
|
||||
phy-names = "pcie-phy";
|
||||
power-domains = <&power RK3588_PD_PCIE>;
|
||||
ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
|
||||
<0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>,
|
||||
<0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>;
|
||||
reg = <0xa 0x41000000 0x0 0x00400000>,
|
||||
<0x0 0xfe190000 0x0 0x00010000>,
|
||||
<0x0 0xf4000000 0x0 0x00100000>;
|
||||
reg-names = "dbi", "apb", "config";
|
||||
resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>;
|
||||
reset-names = "pwr", "pipe";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
status = "disabled";
|
||||
|
||||
pcie2x1l2_intc: legacy-interrupt-controller {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@fe1c0000 {
|
||||
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
|
||||
reg = <0x0 0xfe1c0000 0x0 0x10000>;
|
||||
|
|
@ -1170,6 +1378,52 @@ gmac1_mtl_tx_setup: tx-queues-config {
|
|||
};
|
||||
};
|
||||
|
||||
sata0: sata@fe210000 {
|
||||
compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
|
||||
reg = <0 0xfe210000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
|
||||
<&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
|
||||
<&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
|
||||
clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
|
||||
ports-implemented = <0x1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
sata-port@0 {
|
||||
reg = <0>;
|
||||
hba-port-cap = <HBA_PORT_FBSCP>;
|
||||
phys = <&combphy0_ps PHY_TYPE_SATA>;
|
||||
phy-names = "sata-phy";
|
||||
snps,rx-ts-max = <32>;
|
||||
snps,tx-ts-max = <32>;
|
||||
};
|
||||
};
|
||||
|
||||
sata2: sata@fe230000 {
|
||||
compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
|
||||
reg = <0 0xfe230000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>,
|
||||
<&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>,
|
||||
<&cru CLK_PIPEPHY2_PIPE_ASIC_G>;
|
||||
clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
|
||||
ports-implemented = <0x1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
sata-port@0 {
|
||||
reg = <0>;
|
||||
hba-port-cap = <HBA_PORT_FBSCP>;
|
||||
phys = <&combphy2_psu PHY_TYPE_SATA>;
|
||||
phy-names = "sata-phy";
|
||||
snps,rx-ts-max = <32>;
|
||||
snps,tx-ts-max = <32>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc: mmc@fe2c0000 {
|
||||
compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
|
||||
reg = <0x0 0xfe2c0000 0x0 0x4000>;
|
||||
|
|
@ -1943,6 +2197,38 @@ dmac2: dma-controller@fed10000 {
|
|||
#dma-cells = <1>;
|
||||
};
|
||||
|
||||
combphy0_ps: phy@fee00000 {
|
||||
compatible = "rockchip,rk3588-naneng-combphy";
|
||||
reg = <0x0 0xfee00000 0x0 0x100>;
|
||||
clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>,
|
||||
<&cru PCLK_PHP_ROOT>;
|
||||
clock-names = "ref", "apb", "pipe";
|
||||
assigned-clocks = <&cru CLK_REF_PIPE_PHY0>;
|
||||
assigned-clock-rates = <100000000>;
|
||||
#phy-cells = <1>;
|
||||
resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>;
|
||||
reset-names = "phy", "apb";
|
||||
rockchip,pipe-grf = <&php_grf>;
|
||||
rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
combphy2_psu: phy@fee20000 {
|
||||
compatible = "rockchip,rk3588-naneng-combphy";
|
||||
reg = <0x0 0xfee20000 0x0 0x100>;
|
||||
clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>,
|
||||
<&cru PCLK_PHP_ROOT>;
|
||||
clock-names = "ref", "apb", "pipe";
|
||||
assigned-clocks = <&cru CLK_REF_PIPE_PHY2>;
|
||||
assigned-clock-rates = <100000000>;
|
||||
#phy-cells = <1>;
|
||||
resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>;
|
||||
reset-names = "phy", "apb";
|
||||
rockchip,pipe-grf = <&php_grf>;
|
||||
rockchip,pipe-phy-grf = <&pipe_phy2_grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
system_sram2: sram@ff001000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x0 0xff001000 0x0 0xef000>;
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user