mirror of
https://github.com/torvalds/linux.git
synced 2026-06-08 06:25:52 +02:00
arm64: dts: rockchip: Add rk3368 Sziauto board support
Change-Id: I1d4188dcb268d25d445c8369a44813eeceaace2f Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
This commit is contained in:
Wyon Bi
Tao Huang
parent
3f39dbd253
commit
5eb7acedd4
|
|
@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88-dcdc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-sheep.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-sheep-lvds.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-sziauto-rk618.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-xikp.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-box-808-android-6.0.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-box-rev1-android-6.0.dtb
|
||||
|
|
|
|||
685
arch/arm64/boot/dts/rockchip/rk3368-sziauto-rk618.dts
Normal file
685
arch/arm64/boot/dts/rockchip/rk3368-sziauto-rk618.dts
Normal file
|
|
@ -0,0 +1,685 @@
|
|||
/*
|
||||
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3368.dtsi"
|
||||
#include "rk3368-android.dtsi"
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/clock/rk618-cru.h>
|
||||
|
||||
/ {
|
||||
model = "Rockchip rk3368 Sziauto board";
|
||||
compatible = "rockchip,sziauto", "rockchip,rk3368";
|
||||
|
||||
panel {
|
||||
compatible = "simple-panel";
|
||||
backlight = <&backlight>;
|
||||
enable-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
|
||||
prepare-delay-ms = <20>;
|
||||
enable-delay-ms = <20>;
|
||||
disable-delay-ms = <20>;
|
||||
unprepare-delay-ms = <20>;
|
||||
bus-format = <MEDIA_BUS_FMT_RGB888_1X7X4_SPWG>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
|
||||
timing0: timing0 {
|
||||
clock-frequency = <136000000>;
|
||||
hactive = <1920>;
|
||||
vactive = <1080>;
|
||||
hback-porch = <60>;
|
||||
hfront-porch = <60>;
|
||||
hsync-len = <40>;
|
||||
vback-porch = <4>;
|
||||
vfront-porch = <4>;
|
||||
vsync-len = <3>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <0>;
|
||||
pixelclk-active = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
port {
|
||||
panel_input_lvds: endpoint {
|
||||
remote-endpoint = <&lvds_output_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk818 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm0 0 50000 0>;
|
||||
brightness-levels = <
|
||||
32 32 34 34 36 36 38 38 40 40
|
||||
42 42 44 44 46 46 48 48 50 50
|
||||
52 52 54 54 56 56 58 58 60 60
|
||||
62 62 64 64 66 66 68 68 70 70
|
||||
72 72 74 74 76 76 78 78 80 80
|
||||
82 82 84 84 86 86 88 88 90 90
|
||||
92 92 94 94 96 96 98 98 100 100
|
||||
102 102 104 104 106 106 108 108 110 110
|
||||
112 112 114 114 116 116 118 118 120 120
|
||||
122 122 124 124 126 126 128 128 130 130
|
||||
132 132 134 134 136 136 138 138 140 140
|
||||
142 142 144 144 146 146 148 148 150 150
|
||||
152 152 154 154 156 156 158 158 160 160
|
||||
162 162 164 164 166 166 168 168 170 170
|
||||
172 172 174 174 176 176 178 178 180 180
|
||||
182 182 184 184 186 186 188 188 190 190
|
||||
192 192 194 194 196 196 198 198 200 200
|
||||
202 202 204 204 206 206 208 208 210 210
|
||||
212 212 214 214 216 216 218 218 220 220
|
||||
222 222 224 224 225 225 226 226 227 227
|
||||
228 228 229 229 230 230 231 231 232 232
|
||||
233 233 234 234 235 235 236 236 237 237
|
||||
238 238 239 239 240 240 241 241 242 242
|
||||
243 243 244 244 245 245 246 246 247 247
|
||||
248 248 249 249 250 250 251 251 252 252
|
||||
253 253 254 254 255 255>;
|
||||
default-brightness-level = <120>;
|
||||
enable-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rockchip-key {
|
||||
compatible = "rockchip,key";
|
||||
io-channels = <&saradc 1>;
|
||||
status = "okay";
|
||||
|
||||
vol-up-key {
|
||||
linux,code = <115>;
|
||||
label = "volume up";
|
||||
rockchip,adc_value = <1>;
|
||||
};
|
||||
|
||||
vol-down-key {
|
||||
linux,code = <114>;
|
||||
label = "volume down";
|
||||
rockchip,adc_value = <170>;
|
||||
};
|
||||
|
||||
power-key {
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <116>;
|
||||
label = "power";
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
menu-key {
|
||||
linux,code = <59>;
|
||||
label = "menu";
|
||||
rockchip,adc_value = <355>;
|
||||
};
|
||||
|
||||
home-key {
|
||||
linux,code = <102>;
|
||||
label = "home";
|
||||
rockchip,adc_value = <746>;
|
||||
};
|
||||
|
||||
back-key {
|
||||
linux,code = <158>;
|
||||
label = "back";
|
||||
rockchip,adc_value = <560>;
|
||||
};
|
||||
|
||||
camera-key {
|
||||
linux,code = <212>;
|
||||
label = "camera";
|
||||
rockchip,adc_value = <450>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3800000>;
|
||||
regulator-max-microvolt = <3800000>;
|
||||
};
|
||||
|
||||
vcc_host: vcc-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&host_vbus_drv>;
|
||||
regulator-name = "vcc_host";
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
|
||||
rk618: rk618@50 {
|
||||
compatible = "rockchip,rk618";
|
||||
reg = <0x50>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2s_8ch_mclk &lcdc_lcdc &state_video_phy_ttl>;
|
||||
pinctrl-1 = <&lcdc_gpio &state_video_phy_idle>;
|
||||
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
||||
clock-names = "clkin";
|
||||
reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
CRU: cru {
|
||||
compatible = "rockchip,rk618-cru";
|
||||
clocks = <&cru SCLK_I2S_8CH_OUT>, <&cru DCLK_VOP>;
|
||||
clock-names = "clkin", "lcdc0_dclkp";
|
||||
assigned-clocks = <&CRU SCALER_PLLIN_CLK>, <&CRU VIF_PLLIN_CLK>,
|
||||
<&CRU HDMI_CLK>, <&CRU SCALER_CLK>,
|
||||
<&CRU CODEC_CLK>;
|
||||
assigned-clock-parents = <&CRU LCDC0_CLK>, <&CRU LCDC0_CLK>,
|
||||
<&CRU VIF0_CLK>, <&CRU SCALER_PLL_CLK>,
|
||||
<&cru SCLK_I2S_8CH_OUT>;
|
||||
#clock-cells = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
LVDS: lvds {
|
||||
compatible = "rockchip,rk618-lvds";
|
||||
clocks = <&CRU LVDS_CLK>, <&CRU DITHER_CLK>,
|
||||
<&CRU VIF0_CLK>, <&CRU SCALER_CLK>;
|
||||
clock-names = "lvds", "dither", "vif", "scaler";
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
lvds_input_vop: endpoint {
|
||||
remote-endpoint = <&vop_output_lvds>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
lvds_output_panel: endpoint {
|
||||
remote-endpoint = <&panel_input_lvds>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_out {
|
||||
vop_output_lvds: endpoint@4 {
|
||||
reg = <4>;
|
||||
remote-endpoint = <&lvds_input_vop>;
|
||||
};
|
||||
};
|
||||
|
||||
&route_lvds {
|
||||
connect = <&vop_output_lvds>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&emmc {
|
||||
status = "okay";
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
supports-emmc;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
status = "disabled";
|
||||
clock-frequency = <37500000>;
|
||||
clock-freq-min-max = <400000 37500000>;
|
||||
supports-sd;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
card-detect-delay = <200>;
|
||||
disable-wp;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
clock-frequency = <50000000>;
|
||||
clock-freq-min-max = <200000 50000000>;
|
||||
supports-sdio;
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
syr827: syr827@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
|
||||
regulator-compatible = "fan53555-reg";
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-state = <3>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
rk818: pmic@1c {
|
||||
compatible = "rockchip,rk818";
|
||||
reg = <0x1c>;
|
||||
clock-output-names = "xin32k", "wifibt_32kin";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc_sys>;
|
||||
vcc8-supply = <&vcc_sys>;
|
||||
vcc9-supply = <&vcc_io>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ddr";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_io: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_io";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_codec: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcca_codec";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_tp: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc_tp";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_10: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd_10";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc18_lcd: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc18_lcd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_pmu: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vccio_pmu";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd10_lcd: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd10_lcd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_18: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_18";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_wl: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_wl";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: SWITCH_REG {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
boost_otg: DCDC_BOOST {
|
||||
regulator-name = "boost_otg";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
logic-supply = <&vdd_logic>;
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
dvp-supply = <&vcc_18>;
|
||||
audio-supply = <&vcc_io>;
|
||||
gpio30-supply = <&vcc_io>;
|
||||
gpio1830-supply = <&vcc_io>;
|
||||
sdcard-supply = <&vccio_sd>;
|
||||
wifi-supply = <&vccio_wl>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmu-supply = <&vcc_io>;
|
||||
vop-supply = <&vcc_io>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
|
||||
u2phy_host: host-port {
|
||||
phy-supply = <&vcc_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox_scpi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
tsadc-supply = <&syr827>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user