mirror of
https://github.com/torvalds/linux.git
synced 2026-06-04 20:46:48 +02:00
New boards: Firefly PX30 Core SoM with JD4 baseboard, NanoPi 2S Plus,
Taishan Pi RK3566, ODROID-M1S,NanoPC-T6 LTS, Cool Pi CM5 GenBook Big number of improvements for NanoPC-T6,QNAP-TS433 and FastRhino R66S With recent dtc changes making it into linux-next the Wolfvision Visualizer overlay finally compiles without warnings. And smaller number of improvements on a number of Radxa boards. Interesting new additions on a soc-level are the hardware RNG on rk3568, an additional sdmmc-controller (not supported before) on rk3328 and v4l video codecs for the rk3588 (decoding of h.264 amongst others). -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmbU4y4QHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgXGsCACrCrqd90s6oE5y2dhmgyPdBHUmohhkE/m/ lq30aHjYROYlpNkFTVDezL9qaX74LkZ4vBMpd//189b2vp+vQOEOYN5Sjs2vrilY f7Z1Wq38Czude4+AkOLMpnG/PExdtFO2AIjo4Zcg5i7NvC5eFd/59IyE4SoRzfEQ f2AZ5iUPHrYjLgpUCoFBf9ydR4u2nZIrTEeVIij+1lGYfF9fHpoERpFBlIeUUzBB C4e7AkAbty+O+OrXYM9v4vvWZMQzinAxCEBgt6I7bkj/JGIHOilPtk//7ejRIAlM vRd6JwpRHyFAca9UBe+hmCf4o6q0PBgBnk3Pzu7v/2urf7hb9Egr =66Iu -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbW5zQACgkQYKtH/8kJ UidcfA/+ON1rt9j7KwdvKOuGr20cBBoEPWaK0IocYzeLwrMwRQzlsOtftIdNB4tT ANxZ6sxL3MEpj8g+WyittHC0yar4g/09sYq3I00y9PHHWeDp2w2aht3DqrstKBpu l3cY1YtR1bZCrnNGhEBwJABIT3svhd/EBLfB+fNHFyxfVpufq0Bs0lIcIX0SjG10 TZxCGMFPrpg1X7XCZ/GIicPe+b1Yw5RFMKHorxLgK5GFTBozAV66S6oi2czVuQFQ BtnOG1tjTGU7Udzfrr3a19wjIBwqigmovEh+/uUBp/VG27SQ7VBBymjUIeDkoAE5 oIBtC91EewTTbQ7wsjAY8CF+0E+O6T0wTQAgU3SDXf6LVXKA0MkxbqJ9tRrooETs CNfHJ31VoyI4a2LqVaY7KyAUgAU3GglD+21beA0h7psnqWGKLeUM9rNCaNH1NWpV KNHZSg5rLtVuLY6/kCCGbDj/HrrQ9FTtFHbLYGiXPZSvi2pbEsDUHwcYOPp10l0z MAAsOrU+pFg5zoe53iZVF5fL2vMoSF9kvAlbqQfJUWwneft9fbwbLWl+b0/Jn0Un xxSvix2Ip4f8pVE1nCmRlqHWp9nQDt7hj+K4AIu4vLoY/TT1JyIADqDk6IodMrjY lKt/ckcOTeh5pSLuzxaI5RYYjAKBGhCxsSYGXpHZx0nz7TPD2jI= =nwGo -----END PGP SIGNATURE----- Merge tag 'v6.12-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards: Firefly PX30 Core SoM with JD4 baseboard, NanoPi 2S Plus, Taishan Pi RK3566, ODROID-M1S,NanoPC-T6 LTS, Cool Pi CM5 GenBook Big number of improvements for NanoPC-T6,QNAP-TS433 and FastRhino R66S With recent dtc changes making it into linux-next the Wolfvision Visualizer overlay finally compiles without warnings. And smaller number of improvements on a number of Radxa boards. Interesting new additions on a soc-level are the hardware RNG on rk3568, an additional sdmmc-controller (not supported before) on rk3328 and v4l video codecs for the rk3588 (decoding of h.264 amongst others). * tag 'v6.12-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (62 commits) arm64: dts: rockchip: drop unsupported regulator-property from NanoPC-T6 arm64: dts: rockchip: drop unsupported regulator property from NanoPC-T6 arm64: dts: rockchip: use correct fcs,suspend-voltage-selector on NanoPC-T6 arm64: dts: rockchip: add Mask Rom key on NanoPC-T6 arm64: dts: rockchip: enable USB-C on NanoPC-T6 arm64: dts: rockchip: enable GPU on NanoPC-T6 arm64: dts: rockchip: add IR-receiver to NanoPC-T6 arm64: dts: rockchip: add SPI flash on NanoPC-T6 arm64: dts: rockchip: add NanoPC-T6 LTS arm64: dts: rockchip: move NanoPC-T6 parts to DTS arm64: dts: rockchip: prepare NanoPC-T6 for LTS board dt-bindings: arm: rockchip: Add NanoPC-T6 LTS arm64: dts: rockchip: disable display subsystem only for Radxa E25 arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A arm64: dts: rockchip: remove unnecessary properties for Radxa ROCK 5A arm64: dts: rockchip: add dts for LCKFB Taishan Pi RK3566 dt-bindings: arm: rockchip: Add LCKFB Taishan Pi RK3566 dt-bindings: vendor-prefixes: Add Shenzhen JLC Technology Group LCKFB arm64: dts: rockchip: Add Hardkernel ODROID-M1S dt-bindings: arm: rockchip: Add Hardkernel ODROID-M1S ... Link: https://lore.kernel.org/r/6322098.17fYzF0512@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
57e8098a9a
|
|
@ -96,6 +96,13 @@ properties:
|
|||
- const: coolpi,pi-cm5
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Cool Pi CM5 GenBook
|
||||
items:
|
||||
- enum:
|
||||
- coolpi,pi-cm5-genbook
|
||||
- const: coolpi,pi-cm5
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Cool Pi 4 Model B
|
||||
items:
|
||||
- const: coolpi,pi-4b
|
||||
|
|
@ -148,6 +155,12 @@ properties:
|
|||
- const: engicam,px30-core
|
||||
- const: rockchip,px30
|
||||
|
||||
- description: Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard
|
||||
items:
|
||||
- const: firefly,px30-jd4-core-mb
|
||||
- const: firefly,px30-jd4-core
|
||||
- const: rockchip,px30
|
||||
|
||||
- description: Firefly Firefly-RK3288
|
||||
items:
|
||||
- enum:
|
||||
|
|
@ -216,6 +229,7 @@ properties:
|
|||
- friendlyarm,nanopi-r2c
|
||||
- friendlyarm,nanopi-r2c-plus
|
||||
- friendlyarm,nanopi-r2s
|
||||
- friendlyarm,nanopi-r2s-plus
|
||||
- const: rockchip,rk3328
|
||||
|
||||
- description: FriendlyElec NanoPi4 series boards
|
||||
|
|
@ -243,9 +257,11 @@ properties:
|
|||
- friendlyarm,nanopi-r6s
|
||||
- const: rockchip,rk3588s
|
||||
|
||||
- description: FriendlyElec NanoPC T6
|
||||
- description: FriendlyElec NanoPC T6 series boards
|
||||
items:
|
||||
- const: friendlyarm,nanopc-t6
|
||||
- enum:
|
||||
- friendlyarm,nanopc-t6
|
||||
- friendlyarm,nanopc-t6-lts
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: FriendlyElec CM3588-based boards
|
||||
|
|
@ -581,9 +597,14 @@ properties:
|
|||
|
||||
- description: Hardkernel Odroid M1
|
||||
items:
|
||||
- const: rockchip,rk3568-odroid-m1
|
||||
- const: hardkernel,odroid-m1
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Hardkernel Odroid M1S
|
||||
items:
|
||||
- const: hardkernel,odroid-m1s
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Hugsun X99 TV Box
|
||||
items:
|
||||
- const: hugsun,x99
|
||||
|
|
@ -622,6 +643,11 @@ properties:
|
|||
- const: leez,p710
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: LCKFB Taishan Pi RK3566
|
||||
items:
|
||||
- const: lckfb,tspi-rk3566
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Lunzn FastRhino R66S / R68S
|
||||
items:
|
||||
- enum:
|
||||
|
|
|
|||
|
|
@ -804,6 +804,8 @@ patternProperties:
|
|||
description: Lantiq Semiconductor
|
||||
"^lattice,.*":
|
||||
description: Lattice Semiconductor
|
||||
"^lckfb,.*":
|
||||
description: Shenzhen JLC Technology Group Co., Ltd.
|
||||
"^lctech,.*":
|
||||
description: Shenzen LC Technology Co., Ltd.
|
||||
"^leadtek,.*":
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
|
||||
|
|
@ -20,6 +21,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
|
||||
|
|
@ -81,6 +83,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-odroid-m1s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v1.1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v2.1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
|
||||
|
|
@ -102,6 +105,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lckfb-tspi.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
|
|
@ -118,9 +122,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-genbook.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
|
||||
|
|
@ -128,6 +134,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
|
||||
|
|
|
|||
179
arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core-mb.dts
Normal file
179
arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core-mb.dts
Normal file
|
|
@ -0,0 +1,179 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "px30-firefly-jd4-core.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "firefly,px30-jd4-core-mb", "firefly,px30-jd4-core",
|
||||
"rockchip,px30";
|
||||
model = "Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac;
|
||||
mmc0 = &sdmmc;
|
||||
mmc1 = &sdio;
|
||||
mmc2 = &emmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
dc_12v: dc-12v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 2>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1500000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-recovery {
|
||||
label = "Recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <18000>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blue_led>, <&green_led>;
|
||||
|
||||
blue-led {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
label = "px30-mb-jd4:blue:work";
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
green-led {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
label = "px30-mb-jd4:blue:diy";
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
|
||||
};
|
||||
|
||||
vcc5v0_baseboard: vcc5v0-baseboard-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_baseboard";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac {
|
||||
clock_in_out = "output";
|
||||
phy-supply = <&vcc_rmii>;
|
||||
snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 50000 50000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
blue_led: blue-led {
|
||||
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
green_led: green-led {
|
||||
rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins =
|
||||
<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
card-detect-delay = <800>;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
|
||||
u2phy_host: host-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
320
arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core.dtsi
Normal file
320
arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core.dtsi
Normal file
|
|
@ -0,0 +1,320 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "px30.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "firefly,px30-jd4-core", "rockchip,px30";
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
pinctrl-0 = <&emmc_reset>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_baseboard>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v0>;
|
||||
vqmmc-supply = <&vccio_flash>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_log>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "xin32k";
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: DCDC_REG2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: vcc_rmii: DCDC_REG4 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sys: DCDC_REG5 {
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v0: LDO_REG1 {
|
||||
regulator-name = "vcc_1v0";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_1v0: LDO_REG3 {
|
||||
regulator-name = "vdd_1v0";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v0_pmu: LDO_REG4 {
|
||||
regulator-name = "vcc3v0_pmu";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG6 {
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc2v8_dvp: LDO_REG7 {
|
||||
regulator-name = "vcc2v8_dvp";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <2800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG8 {
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v5_dvp: LDO_REG9 {
|
||||
regulator-name = "vcc1v5_dvp";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_lcd: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_lcd";
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc5v0_host: SWITCH_REG2 {
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
vccio1-supply = <&vccio_sdio>;
|
||||
vccio2-supply = <&vccio_sd>;
|
||||
vccio3-supply = <&vcc_3v0>;
|
||||
vccio4-supply = <&vcc3v0_pmu>;
|
||||
vccio5-supply = <&vcc_3v0>;
|
||||
vccio6-supply = <&vccio_flash>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
emmc {
|
||||
emmc_reset: emmc-reset {
|
||||
rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v0_pmu>;
|
||||
pmuio2-supply = <&vcc3v0_pmu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
32
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts
Normal file
32
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts
Normal file
|
|
@ -0,0 +1,32 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* (C) Copyright 2018 FriendlyElec Computer Tech. Co., Ltd.
|
||||
* (http://www.friendlyarm.com)
|
||||
*
|
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3328-nanopi-r2s.dts"
|
||||
|
||||
/ {
|
||||
compatible = "friendlyarm,nanopi-r2s-plus", "rockchip,rk3328";
|
||||
model = "FriendlyElec NanoPi R2S Plus";
|
||||
|
||||
aliases {
|
||||
mmc1 = &emmc;
|
||||
};
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
disable-wp;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
||||
supports-emmc;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -910,6 +910,8 @@ sdmmc: mmc@ff500000 {
|
|||
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
||||
fifo-depth = <0x100>;
|
||||
max-frequency = <150000000>;
|
||||
resets = <&cru SRST_MMC0>;
|
||||
reset-names = "reset";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -922,6 +924,8 @@ sdio: mmc@ff510000 {
|
|||
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
||||
fifo-depth = <0x100>;
|
||||
max-frequency = <150000000>;
|
||||
resets = <&cru SRST_SDIO>;
|
||||
reset-names = "reset";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -934,6 +938,8 @@ emmc: mmc@ff520000 {
|
|||
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
||||
fifo-depth = <0x100>;
|
||||
max-frequency = <150000000>;
|
||||
resets = <&cru SRST_EMMC>;
|
||||
reset-names = "reset";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -1036,6 +1042,20 @@ usb_host0_ohci: usb@ff5d0000 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
sdmmc_ext: mmc@ff5f0000 {
|
||||
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
|
||||
reg = <0x0 0xff5f0000 0x0 0x4000>;
|
||||
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru HCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT>,
|
||||
<&cru SCLK_SDMMC_EXT_DRV>, <&cru SCLK_SDMMC_EXT_SAMPLE>;
|
||||
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
||||
fifo-depth = <0x100>;
|
||||
max-frequency = <150000000>;
|
||||
resets = <&cru SRST_SDMMCEXT>;
|
||||
reset-names = "reset";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usbdrd3: usb@ff600000 {
|
||||
compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
|
||||
reg = <0x0 0xff600000 0x0 0x100000>;
|
||||
|
|
|
|||
3019
arch/arm64/boot/dts/rockchip/rk3399-base.dtsi
Normal file
3019
arch/arm64/boot/dts/rockchip/rk3399-base.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
|
|
@ -8,7 +8,6 @@
|
|||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "OPEN AI LAB EAIDK-610";
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-base.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3399 Evaluation Board";
|
||||
|
|
|
|||
|
|
@ -9,7 +9,6 @@
|
|||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Firefly-RK3399 Board";
|
||||
|
|
|
|||
|
|
@ -6,8 +6,7 @@
|
|||
*/
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-op1-opp.dtsi"
|
||||
#include "rk3399-op1.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
|
|
|
|||
|
|
@ -4,7 +4,6 @@
|
|||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Hugsun X99 TV BOX";
|
||||
|
|
|
|||
|
|
@ -9,7 +9,6 @@
|
|||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
|
|
|
|||
|
|
@ -12,7 +12,6 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Kobol Helios64";
|
||||
|
|
|
|||
|
|
@ -8,7 +8,6 @@
|
|||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Leez RK3399 P710";
|
||||
|
|
|
|||
|
|
@ -14,7 +14,6 @@
|
|||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
|
|
|
|||
|
|
@ -3,6 +3,8 @@
|
|||
* Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
#include "rk3399.dtsi"
|
||||
|
||||
/ {
|
||||
cluster0_opp: opp-table-0 {
|
||||
compatible = "operating-points-v2";
|
||||
|
|
@ -1,133 +0,0 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
/ {
|
||||
cluster0_opp: opp-table-0 {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp00 {
|
||||
opp-hz = /bits/ 64 <408000000>;
|
||||
opp-microvolt = <825000 825000 1250000>;
|
||||
clock-latency-ns = <40000>;
|
||||
};
|
||||
opp01 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <825000 825000 1250000>;
|
||||
};
|
||||
opp02 {
|
||||
opp-hz = /bits/ 64 <816000000>;
|
||||
opp-microvolt = <850000 850000 1250000>;
|
||||
};
|
||||
opp03 {
|
||||
opp-hz = /bits/ 64 <1008000000>;
|
||||
opp-microvolt = <925000 925000 1250000>;
|
||||
};
|
||||
opp04 {
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
opp-microvolt = <1000000 1000000 1250000>;
|
||||
};
|
||||
opp05 {
|
||||
opp-hz = /bits/ 64 <1416000000>;
|
||||
opp-microvolt = <1125000 1125000 1250000>;
|
||||
};
|
||||
};
|
||||
|
||||
cluster1_opp: opp-table-1 {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp00 {
|
||||
opp-hz = /bits/ 64 <408000000>;
|
||||
opp-microvolt = <825000 825000 1250000>;
|
||||
clock-latency-ns = <40000>;
|
||||
};
|
||||
opp01 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <825000 825000 1250000>;
|
||||
};
|
||||
opp02 {
|
||||
opp-hz = /bits/ 64 <816000000>;
|
||||
opp-microvolt = <825000 825000 1250000>;
|
||||
};
|
||||
opp03 {
|
||||
opp-hz = /bits/ 64 <1008000000>;
|
||||
opp-microvolt = <875000 875000 1250000>;
|
||||
};
|
||||
opp04 {
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
opp-microvolt = <950000 950000 1250000>;
|
||||
};
|
||||
opp05 {
|
||||
opp-hz = /bits/ 64 <1416000000>;
|
||||
opp-microvolt = <1025000 1025000 1250000>;
|
||||
};
|
||||
opp06 {
|
||||
opp-hz = /bits/ 64 <1608000000>;
|
||||
opp-microvolt = <1100000 1100000 1250000>;
|
||||
};
|
||||
opp07 {
|
||||
opp-hz = /bits/ 64 <1800000000>;
|
||||
opp-microvolt = <1200000 1200000 1250000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpu_opp_table: opp-table-2 {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp00 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
opp-microvolt = <825000 825000 1150000>;
|
||||
};
|
||||
opp01 {
|
||||
opp-hz = /bits/ 64 <297000000>;
|
||||
opp-microvolt = <825000 825000 1150000>;
|
||||
};
|
||||
opp02 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <825000 825000 1150000>;
|
||||
};
|
||||
opp03 {
|
||||
opp-hz = /bits/ 64 <500000000>;
|
||||
opp-microvolt = <875000 875000 1150000>;
|
||||
};
|
||||
opp04 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <925000 925000 1150000>;
|
||||
};
|
||||
opp05 {
|
||||
opp-hz = /bits/ 64 <800000000>;
|
||||
opp-microvolt = <1100000 1100000 1150000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
operating-points-v2 = <&cluster0_opp>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
operating-points-v2 = <&cluster0_opp>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
operating-points-v2 = <&cluster0_opp>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
operating-points-v2 = <&cluster0_opp>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
operating-points-v2 = <&cluster1_opp>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
operating-points-v2 = <&cluster1_opp>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
operating-points-v2 = <&gpu_opp_table>;
|
||||
};
|
||||
|
|
@ -10,7 +10,6 @@
|
|||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "dt-bindings/usb/pd.h"
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Orange Pi RK3399 Board";
|
||||
|
|
|
|||
|
|
@ -12,7 +12,6 @@
|
|||
#include <dt-bindings/usb/pd.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 Pinebook Pro";
|
||||
|
|
@ -32,12 +31,12 @@ chosen {
|
|||
backlight: edp-backlight {
|
||||
compatible = "pwm-backlight";
|
||||
power-supply = <&vcc_12v>;
|
||||
pwms = <&pwm0 0 740740 0>;
|
||||
pwms = <&pwm0 0 125000 0>;
|
||||
};
|
||||
|
||||
bat: battery {
|
||||
compatible = "simple-battery";
|
||||
charge-full-design-microamp-hours = <9800000>;
|
||||
charge-full-design-microamp-hours = <10000000>;
|
||||
voltage-max-design-microvolt = <4350000>;
|
||||
voltage-min-design-microvolt = <3000000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -14,7 +14,6 @@
|
|||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 PinePhone Pro";
|
||||
|
|
|
|||
|
|
@ -5,7 +5,6 @@
|
|||
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
|
|
|
|||
|
|
@ -7,7 +7,6 @@
|
|||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Firefly ROC-RK3399-PC Board";
|
||||
|
|
|
|||
|
|
@ -7,8 +7,7 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-t-opp.dtsi"
|
||||
#include "rk3399-t.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK 4C+";
|
||||
|
|
@ -53,6 +52,21 @@ led-1 {
|
|||
};
|
||||
};
|
||||
|
||||
rk809-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "Analog RK809";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
|
|
@ -201,10 +215,13 @@ rk809: pmic@20 {
|
|||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-names = "mclk";
|
||||
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
pinctrl-0 = <&pmic_int_l>, <&i2s_8ch_mclk>;
|
||||
rockchip,system-power-controller;
|
||||
#sound-dai-cells = <0>;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
|
|
@ -446,6 +463,26 @@ &i2c3 {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0_8ch_bus {
|
||||
rockchip,pins =
|
||||
<3 RK_PD0 1 &pcfg_pull_none>,
|
||||
<3 RK_PD2 1 &pcfg_pull_none>,
|
||||
<3 RK_PD3 1 &pcfg_pull_none>,
|
||||
<3 RK_PD7 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
&i2s0_8ch_bus_bclk_off {
|
||||
rockchip,pins =
|
||||
<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<3 RK_PD2 1 &pcfg_pull_none>,
|
||||
<3 RK_PD3 1 &pcfg_pull_none>,
|
||||
<3 RK_PD7 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -473,6 +510,12 @@ bt_wake_l: bt-wake-l {
|
|||
};
|
||||
};
|
||||
|
||||
i2s0 {
|
||||
i2s_8ch_mclk: i2s-8ch-mclk {
|
||||
rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
user_led1: user-led1 {
|
||||
rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
|
|
|
|||
|
|
@ -5,8 +5,8 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399-t.dtsi"
|
||||
#include "rk3399-rock-pi-4.dtsi"
|
||||
#include "rk3399-t-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK 4SE";
|
||||
|
|
|
|||
|
|
@ -4,11 +4,9 @@
|
|||
* Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
|
|
|
|||
|
|
@ -5,8 +5,8 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399-op1.dtsi"
|
||||
#include "rk3399-rock-pi-4.dtsi"
|
||||
#include "rk3399-op1-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK Pi 4A+";
|
||||
|
|
|
|||
|
|
@ -5,8 +5,8 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-rock-pi-4.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK Pi 4A";
|
||||
|
|
|
|||
|
|
@ -5,8 +5,8 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399-op1.dtsi"
|
||||
#include "rk3399-rock-pi-4.dtsi"
|
||||
#include "rk3399-op1-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK Pi 4B+";
|
||||
|
|
|
|||
|
|
@ -5,8 +5,8 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-rock-pi-4.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK Pi 4B";
|
||||
|
|
|
|||
|
|
@ -6,8 +6,8 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-rock-pi-4.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK Pi 4C";
|
||||
|
|
|
|||
|
|
@ -5,9 +5,8 @@
|
|||
* Copyright (c) 2018 Linaro Ltd.
|
||||
*/
|
||||
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "rk3399.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
|
|
|
|||
|
|
@ -7,7 +7,6 @@
|
|||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
|
|
|
|||
|
|
@ -6,7 +6,6 @@
|
|||
#include "dt-bindings/pwm/pwm.h"
|
||||
#include "dt-bindings/input/input.h"
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
|
||||
|
|
|
|||
|
|
@ -4,6 +4,8 @@
|
|||
* Copyright (c) 2022 Radxa Limited
|
||||
*/
|
||||
|
||||
#include "rk3399-base.dtsi"
|
||||
|
||||
/ {
|
||||
cluster0_opp: opp-table-0 {
|
||||
compatible = "operating-points-v2";
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -7,7 +7,6 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
#include <arm/rockchip/rockchip-radxa-dalang-carrier.dtsi>
|
||||
#include "rk3399pro-vmarc-som.dtsi"
|
||||
|
||||
|
|
|
|||
725
arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts
Normal file
725
arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts
Normal file
|
|
@ -0,0 +1,725 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include <dt-bindings/soc/rockchip,boot-mode.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "LCKFB Taishan Pi RK3566";
|
||||
compatible = "lckfb,tspi-rk3566", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
mmc2 = &sdmmc1;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
ramoops: ramoops@110000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0 0x110000 0 0xf0000>;
|
||||
console-size = <0x80000>;
|
||||
ftrace-size = <0x00000>;
|
||||
pmsg-size = <0x50000>;
|
||||
record-size = <0x20000>;
|
||||
};
|
||||
};
|
||||
|
||||
adc_keys: adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-recovery {
|
||||
label = "recovery";
|
||||
linux,code = <KEY_RESTART>;
|
||||
press-threshold-microvolt = <108>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_con: hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "d";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
rgb_led_r: rgb-led-r {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
label = "status-red";
|
||||
};
|
||||
|
||||
rgb_led_g: rgb-led-g {
|
||||
gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
label = "status-green";
|
||||
};
|
||||
|
||||
rgb_led_b: rgb-led-b {
|
||||
gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
label = "status-blue";
|
||||
};
|
||||
};
|
||||
|
||||
multi_leds: multi-led {
|
||||
compatible = "leds-group-multicolor";
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
label = "status-rgb";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
leds = <&rgb_led_r>, <&rgb_led_g>, <&rgb_led_b>;
|
||||
};
|
||||
|
||||
vcc12v0_dcin: regulator-12v0-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v0_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-3v3-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-5v0-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v0_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-5v0-vcc-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
post-power-on-delay-ms = <200>;
|
||||
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "Analog RK809";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
clock-names = "mclk";
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
||||
rockchip,system-power-controller;
|
||||
#sound-dai-cells = <0>;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
codec {
|
||||
rockchip,mic-in-differential;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
/* Touch Screen */
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4m0_xfer>;
|
||||
status = "okay";
|
||||
/* Camera */
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
/* HDMI */
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
/* PMIC */
|
||||
};
|
||||
|
||||
&i2s2_2ch {
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
/* AP6212 Bluetooth */
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bt {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hp-detect {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_host_wake_h: wifi-host-wake-l {
|
||||
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmugrf {
|
||||
reboot-mode {
|
||||
compatible = "syscon-reboot-mode";
|
||||
offset = <0x200>;
|
||||
mode-normal = <BOOT_NORMAL>;
|
||||
mode-loader = <BOOT_BL_DOWNLOAD>;
|
||||
mode-recovery = <BOOT_RECOVERY>;
|
||||
mode-bootloader = <BOOT_FASTBOOT>;
|
||||
};
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
/* Channel 0: Recovery Button */
|
||||
/* Channel 1: Hardware ID */
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <150000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sys>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_h>;
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth: bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "lpo";
|
||||
max-speed = <3000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
663
arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts
Normal file
663
arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts
Normal file
|
|
@ -0,0 +1,663 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Hardkernel ODROID-M1S";
|
||||
compatible = "hardkernel,odroid-m1s", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwr_led>, <&sys_led>;
|
||||
|
||||
led_pwr: led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
led_sys: led-1 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_lcd: regulator-3v3-vcc-lcd {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_pwren>;
|
||||
regulator-name = "vcc3v3_lcd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: regulator-3v3-vcc-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_pwren>;
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-3v3-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-5v0-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb2_host_pwren>;
|
||||
regulator-name = "vcc5v0_usb2_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb2_otg: regulator-5v0-vcc-usb2-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb2_otg_pwren>;
|
||||
regulator-name = "vcc5v0_usb2_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb3_host: regulator-5v0-vcc-usb3-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb3_host_pwren>;
|
||||
regulator-name = "vcc5v0_usb3_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "Analog RK809";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||||
clock_in_out = "input";
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <&vcc_3v3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_rgmii_bus
|
||||
&gmac1m1_clkinout>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
clock-names = "mclk";
|
||||
clock-output-names = "rk809-clkout1", "rk809-clkout2";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
||||
#sound-dai-cells = <0>;
|
||||
system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m0_sclktx
|
||||
&i2s1m0_lrcktx
|
||||
&i2s1m0_sdi0
|
||||
&i2s1m0_sdo0>;
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20_pins>;
|
||||
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
lcd {
|
||||
lcd_pwren: lcd-pwren {
|
||||
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
pwr_led: pwr-led {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
sys_led: sys-led {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie20_pins: pcie20-pins {
|
||||
rockchip,pins =
|
||||
<1 RK_PB0 4 &pcfg_pull_none>,
|
||||
<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<1 RK_PB1 4 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie_pwren: pcie-pwren {
|
||||
rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb2_host_pwren: usb2-host-pwren {
|
||||
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usb2_otg_pwren: usb2-otg-pwren {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usb3_host_pwren: usb3-host-pwren {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_3v3>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_3v3>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr50;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb3_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb2_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_usb2_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb2_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -493,7 +493,6 @@ &uart2 {
|
|||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -20,9 +20,9 @@ &sdmmc0 {
|
|||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr50;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
|
|
|
|||
|
|
@ -39,12 +39,6 @@ &gmac0_tx_bus2
|
|||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus>;
|
||||
snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 15ms, 50ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 15000 50000>;
|
||||
tx_delay = <0x3c>;
|
||||
rx_delay = <0x2f>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -61,12 +55,6 @@ &gmac1m1_tx_bus2
|
|||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_rgmii_bus>;
|
||||
snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 15ms, 50ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 15000 50000>;
|
||||
tx_delay = <0x4f>;
|
||||
rx_delay = <0x26>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -76,6 +64,9 @@ rgmii_phy0: ethernet-phy@1 {
|
|||
reg = <0x1>;
|
||||
pinctrl-0 = <ð_phy0_reset_pin>;
|
||||
pinctrl-names = "default";
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -85,6 +76,9 @@ rgmii_phy1: ethernet-phy@1 {
|
|||
reg = <0x1>;
|
||||
pinctrl-0 = <ð_phy1_reset_pin>;
|
||||
pinctrl-names = "default";
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
|
||||
/ {
|
||||
model = "Hardkernel ODROID-M1";
|
||||
compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
|
||||
compatible = "hardkernel,odroid-m1", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
|
|
|
|||
|
|
@ -6,12 +6,190 @@
|
|||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qnap TS-433-4G NAS System 4-Bay";
|
||||
compatible = "qnap,ts433", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
mmc0 = &sdhci;
|
||||
rtc0 = &rtc_rv8263;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <©_button_pin>, <&reset_button_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-copy {
|
||||
label = "copy";
|
||||
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_COPY>;
|
||||
};
|
||||
|
||||
key-reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd1_led_pin>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd2_led_pin>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd3_led_pin>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd4_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
dc_12v: regulator-dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: regulator-vcc3v3-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: regulator-vcc5v0-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_otg_en>;
|
||||
regulator-name = "vcc5v0_otg";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: regulator-vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
};
|
||||
|
||||
/* connected to usb_host0_xhci */
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to sata1 */
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to sata2 */
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
|
|
@ -20,35 +198,282 @@ &gmac0 {
|
|||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus>;
|
||||
rx_delay = <0x2f>;
|
||||
tx_delay = <0x3c>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
system-power-controller;
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
wakeup-source;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
/*
|
||||
* turning this off, breaks access to both
|
||||
* PCIe controllers, refclk generator perhaps
|
||||
*/
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
rtc@51 {
|
||||
rtc_rv8263: rtc@51 {
|
||||
compatible = "microcrystal,rv8263";
|
||||
reg = <0x51>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
/* eeprom for vital-product-data on the mainboard */
|
||||
eeprom@54 {
|
||||
compatible = "giantec,gt24c04a", "atmel,24c04";
|
||||
reg = <0x54>;
|
||||
label = "VPD_MB";
|
||||
num-addresses = <2>;
|
||||
pagesize = <16>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* eeprom for vital-product-data on the backplane */
|
||||
eeprom@56 {
|
||||
compatible = "giantec,gt24c04a", "atmel,24c04";
|
||||
reg = <0x56>;
|
||||
label = "VPD_BP";
|
||||
num-addresses = <2>;
|
||||
pagesize = <16>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
|
|
@ -59,12 +484,82 @@ rgmii_phy0: ethernet-phy@0 {
|
|||
};
|
||||
|
||||
&pcie30phy {
|
||||
data-lanes = <1 2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Connected to a JMicron AHCI SATA controller */
|
||||
&pcie3x1 {
|
||||
/* The downstream dts has: rockchip,bifurcation, XXX: find out what this is about */
|
||||
reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Connected to the 2.5G NIC for the upper network jack */
|
||||
&pcie3x2 {
|
||||
num-lanes = <1>;
|
||||
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
keys {
|
||||
copy_button_pin: copy-button-pin {
|
||||
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
reset_button_pin: reset-button-pin {
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
hdd1_led_pin: hdd1-led-pin {
|
||||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
hdd2_led_pin: hdd2-led-pin {
|
||||
rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
hdd3_led_pin: hdd3-led-pin {
|
||||
rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
hdd4_led_pin: hdd4_led-pin {
|
||||
rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_otg_en: vcc5v0-otg-en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -75,6 +570,20 @@ &sdhci {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* Connected to an MCU, that provides access to more LEDs,
|
||||
* buzzer, fan control and more.
|
||||
*/
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* Pins available on CN3 connector at TTL voltage level (3V3).
|
||||
* ,_ _.
|
||||
|
|
@ -84,3 +593,53 @@ &sdhci {
|
|||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to usb_host0_xhci */
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to usb_host1_ehci/ohci */
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to usb_host0_ehci/ohci */
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* right port backside */
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* front port */
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* left port backside */
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -108,10 +108,6 @@ &cpu3 {
|
|||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -103,6 +103,10 @@ &combphy1 {
|
|||
phy-supply = <&vcc3v3_pcie30x1>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20_reset_h>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,17 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||
/*
|
||||
* Device tree overlay for the WolfVision PF5 Visualizer display.
|
||||
*
|
||||
* Copyright (C) 2024 WolfVision GmbH.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "rk3568-wolfvision-pf5-display.dtsi"
|
||||
|
||||
&st7789 {
|
||||
compatible = "jasonic,jt240mhqs-hwt-ek-e3",
|
||||
"sitronix,st7789v";
|
||||
rotation = <270>;
|
||||
};
|
||||
121
arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-display.dtsi
Normal file
121
arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-display.dtsi
Normal file
|
|
@ -0,0 +1,121 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||
/*
|
||||
* Device tree overlay base for the WolfVision PF5 displays.
|
||||
*
|
||||
* Copyright (C) 2024 WolfVision GmbH.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/clock/rk3568-cru.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
|
||||
&{/} {
|
||||
display_backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
brightness-levels = <0 255>;
|
||||
default-brightness-level = <255>;
|
||||
num-interpolated-steps = <255>;
|
||||
power-supply = <&vcc3v3_sd>;
|
||||
pwms = <&pwm10 0 1000000 0>;
|
||||
};
|
||||
|
||||
display_spi: spi {
|
||||
compatible = "spi-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cs-gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
miso-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
mosi-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
num-chipselects = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_spi>;
|
||||
sck-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
st7789: panel@0 {
|
||||
compatible = "sitronix,st7789v";
|
||||
reg = <0>;
|
||||
assigned-clocks = <&cru PLL_VPLL>;
|
||||
assigned-clock-rates = <700000000>;
|
||||
backlight = <&display_backlight>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdc_clock &lcdc_data18 &lcd_rstn>;
|
||||
power-supply = <&vcc3v3_sw>;
|
||||
reset-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
|
||||
spi-max-frequency = <100000>;
|
||||
|
||||
port {
|
||||
panel_in_vp2: endpoint {
|
||||
remote-endpoint = <&vp2_out_rgb>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
st1624: touchscreen@55 {
|
||||
compatible = "sitronix,st1624", "sitronix,st1633";
|
||||
reg = <0x55>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&touch_int &touch_rstn>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
display: display-pinctrl {
|
||||
lcd_rstn: lcd-rstn-pinctrl {
|
||||
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
lcd_spi: lcd-spi-pinctrl {
|
||||
rockchip,pins =
|
||||
/* lcd_sdo */
|
||||
<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
/* lcd_csn */
|
||||
<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
/* lcd_scl */
|
||||
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
/* lcd_sdi */
|
||||
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
touchscreen: touchscreen-pinctrl {
|
||||
touch_int: touch-int-pinctrl {
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
touch_rstn: touch-rstn-pinctrl {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm10 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm10m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vp2_out_rgb: endpoint@ROCKCHIP_VOP2_EP_RGB0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_RGB0>;
|
||||
remote-endpoint = <&panel_in_vp2>;
|
||||
};
|
||||
};
|
||||
|
|
@ -257,6 +257,10 @@ power-domain@RK3568_PD_PIPE {
|
|||
};
|
||||
};
|
||||
|
||||
&rng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
|
|
|
|||
|
|
@ -1113,6 +1113,15 @@ sdhci: mmc@fe310000 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
rng: rng@fe388000 {
|
||||
compatible = "rockchip,rk3568-rng";
|
||||
reg = <0x0 0xfe388000 0x0 0x4000>;
|
||||
clocks = <&cru CLK_TRNG_NS>, <&cru HCLK_TRNG_NS>;
|
||||
clock-names = "core", "ahb";
|
||||
resets = <&cru SRST_TRNG_NS>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2s0_8ch: i2s@fe400000 {
|
||||
compatible = "rockchip,rk3568-i2s-tdm";
|
||||
reg = <0x0 0xfe400000 0x0 0x1000>;
|
||||
|
|
|
|||
|
|
@ -1122,6 +1122,107 @@ power-domain@RK3588_PD_SDMMC {
|
|||
};
|
||||
};
|
||||
|
||||
vpu121: video-codec@fdb50000 {
|
||||
compatible = "rockchip,rk3588-vpu121", "rockchip,rk3568-vpu";
|
||||
reg = <0x0 0xfdb50000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "vdpu";
|
||||
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
|
||||
clock-names = "aclk", "hclk";
|
||||
iommus = <&vpu121_mmu>;
|
||||
power-domains = <&power RK3588_PD_VDPU>;
|
||||
};
|
||||
|
||||
vpu121_mmu: iommu@fdb50800 {
|
||||
compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
|
||||
reg = <0x0 0xfdb50800 0x0 0x40>;
|
||||
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clock-names = "aclk", "iface";
|
||||
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
|
||||
power-domains = <&power RK3588_PD_VDPU>;
|
||||
#iommu-cells = <0>;
|
||||
};
|
||||
|
||||
vepu121_0: video-codec@fdba0000 {
|
||||
compatible = "rockchip,rk3588-vepu121";
|
||||
reg = <0x0 0xfdba0000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_JPEG_ENCODER0>, <&cru HCLK_JPEG_ENCODER0>;
|
||||
clock-names = "aclk", "hclk";
|
||||
iommus = <&vepu121_0_mmu>;
|
||||
power-domains = <&power RK3588_PD_VDPU>;
|
||||
};
|
||||
|
||||
vepu121_0_mmu: iommu@fdba0800 {
|
||||
compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
|
||||
reg = <0x0 0xfdba0800 0x0 0x40>;
|
||||
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_JPEG_ENCODER0>, <&cru HCLK_JPEG_ENCODER0>;
|
||||
clock-names = "aclk", "iface";
|
||||
power-domains = <&power RK3588_PD_VDPU>;
|
||||
#iommu-cells = <0>;
|
||||
};
|
||||
|
||||
vepu121_1: video-codec@fdba4000 {
|
||||
compatible = "rockchip,rk3588-vepu121";
|
||||
reg = <0x0 0xfdba4000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_JPEG_ENCODER1>, <&cru HCLK_JPEG_ENCODER1>;
|
||||
clock-names = "aclk", "hclk";
|
||||
iommus = <&vepu121_1_mmu>;
|
||||
power-domains = <&power RK3588_PD_VDPU>;
|
||||
};
|
||||
|
||||
vepu121_1_mmu: iommu@fdba4800 {
|
||||
compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
|
||||
reg = <0x0 0xfdba4800 0x0 0x40>;
|
||||
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_JPEG_ENCODER1>, <&cru HCLK_JPEG_ENCODER1>;
|
||||
clock-names = "aclk", "iface";
|
||||
power-domains = <&power RK3588_PD_VDPU>;
|
||||
#iommu-cells = <0>;
|
||||
};
|
||||
|
||||
vepu121_2: video-codec@fdba8000 {
|
||||
compatible = "rockchip,rk3588-vepu121";
|
||||
reg = <0x0 0xfdba8000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_JPEG_ENCODER2>, <&cru HCLK_JPEG_ENCODER2>;
|
||||
clock-names = "aclk", "hclk";
|
||||
iommus = <&vepu121_2_mmu>;
|
||||
power-domains = <&power RK3588_PD_VDPU>;
|
||||
};
|
||||
|
||||
vepu121_2_mmu: iommu@fdba8800 {
|
||||
compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
|
||||
reg = <0x0 0xfdba8800 0x0 0x40>;
|
||||
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_JPEG_ENCODER2>, <&cru HCLK_JPEG_ENCODER2>;
|
||||
clock-names = "aclk", "iface";
|
||||
power-domains = <&power RK3588_PD_VDPU>;
|
||||
#iommu-cells = <0>;
|
||||
};
|
||||
|
||||
vepu121_3: video-codec@fdbac000 {
|
||||
compatible = "rockchip,rk3588-vepu121";
|
||||
reg = <0x0 0xfdbac000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_JPEG_ENCODER3>, <&cru HCLK_JPEG_ENCODER3>;
|
||||
clock-names = "aclk", "hclk";
|
||||
iommus = <&vepu121_3_mmu>;
|
||||
power-domains = <&power RK3588_PD_VDPU>;
|
||||
};
|
||||
|
||||
vepu121_3_mmu: iommu@fdbac800 {
|
||||
compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
|
||||
reg = <0x0 0xfdbac800 0x0 0x40>;
|
||||
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_JPEG_ENCODER3>, <&cru HCLK_JPEG_ENCODER3>;
|
||||
clock-names = "aclk", "iface";
|
||||
power-domains = <&power RK3588_PD_VDPU>;
|
||||
#iommu-cells = <0>;
|
||||
};
|
||||
|
||||
av1d: video-codec@fdc70000 {
|
||||
compatible = "rockchip,rk3588-av1-vpu";
|
||||
reg = <0x0 0xfdc70000 0x0 0x800>;
|
||||
|
|
|
|||
349
arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
Normal file
349
arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
Normal file
|
|
@ -0,0 +1,349 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3588-coolpi-cm5.dtsi"
|
||||
|
||||
/ {
|
||||
model = "CoolPi CM5 GenBook";
|
||||
compatible = "coolpi,pi-cm5-genbook", "coolpi,pi-cm5", "rockchip,rk3588";
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bl_en>;
|
||||
power-supply = <&vcc12v_dcin>;
|
||||
pwms = <&pwm6 0 25000 0>;
|
||||
};
|
||||
|
||||
battery: battery {
|
||||
compatible = "simple-battery";
|
||||
charge-full-design-microamp-hours = <9800000>;
|
||||
voltage-max-design-microvolt = <4350000>;
|
||||
voltage-min-design-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
charger: dc-charger {
|
||||
compatible = "gpio-charger";
|
||||
charger-type = "mains";
|
||||
gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
heartbeat_led: led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
wlan_led: led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
charging_red: led-2 {
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <7000000>;
|
||||
regulator-max-microvolt = <7000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <7000000>;
|
||||
regulator-max-microvolt = <7000000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_lcd: vcc3v3-lcd-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_lcd";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdpwr_en>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_pwren>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host0: vcc5v0_usb30_host: vcc5v0-usb-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_host_pwren>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4m3_xfer>;
|
||||
|
||||
cw2015@62 {
|
||||
compatible = "cellwise,cw2015";
|
||||
reg = <0x62>;
|
||||
|
||||
cellwise,battery-profile = /bits/ 8 <
|
||||
0x17 0x67 0x69 0x63 0x63 0x62 0x62 0x5F
|
||||
0x52 0x73 0x4C 0x5A 0x5B 0x4B 0x42 0x3A
|
||||
0x33 0x2D 0x29 0x28 0x2E 0x31 0x3C 0x49
|
||||
0x2C 0x2C 0x0C 0xCD 0x30 0x51 0x50 0x66
|
||||
0x74 0x74 0x75 0x78 0x41 0x1B 0x84 0x5F
|
||||
0x0B 0x34 0x1C 0x45 0x89 0x92 0xA0 0x13
|
||||
0x2C 0x55 0xAB 0xCB 0x80 0x5E 0x7B 0xCB
|
||||
0x2F 0x00 0x64 0xA5 0xB5 0x10 0x18 0x21
|
||||
>;
|
||||
|
||||
cellwise,monitor-interval-ms = <3000>;
|
||||
monitored-battery = <&battery>;
|
||||
power-supplies = <&charger>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5m3_xfer>;
|
||||
|
||||
touchpad: touchpad@2c {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x2c>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
|
||||
hid-descr-addr = <0x0020>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* M.2 E-Key */
|
||||
&pcie2x1l0 {
|
||||
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* M.2 M-Key ssd */
|
||||
&pcie3x4 {
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
lcd {
|
||||
lcdpwr_en: lcdpwr-en {
|
||||
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bl_en: bl-en {
|
||||
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb_pwren: usb-pwren {
|
||||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
usb_otg_pwren: usb-otg-pwren {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
usb_host_pwren: usb-host-pwren {
|
||||
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
bt_pwron: bt-pwron {
|
||||
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
pcie_clkreq: pcie-clkreq {
|
||||
rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
pcie_rst: pcie-rst {
|
||||
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
wifi_pwron: wifi-pwron {
|
||||
rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
pcie_wake: pcie-wake {
|
||||
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm6 {
|
||||
pinctrl-0 = <&pwm6m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspim2_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <100000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
phy-supply = <&vcc5v0_usb_host0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_usb>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* For Keypad */
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Type C port */
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "peripheral";
|
||||
maximum-speed = "high-speed";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to a HUB for camera and BT */
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB A out */
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
60
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts
Normal file
60
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts
Normal file
|
|
@ -0,0 +1,60 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2023 Thomas McKahan
|
||||
* Copyright (c) 2024 Linaro Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3588-nanopc-t6.dtsi"
|
||||
|
||||
/ {
|
||||
model = "FriendlyElec NanoPC-T6 LTS";
|
||||
compatible = "friendlyarm,nanopc-t6-lts", "rockchip,rk3588";
|
||||
|
||||
/* provide power for on-board USB 2.0 hub */
|
||||
vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&usb20_host_pwren>;
|
||||
pinctrl-names = "default";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_usb20_host";
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
usb {
|
||||
usb20_host_pwren: usb20-host-pwren {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
phy-supply = <&vcc5v0_usb20_host>;
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -2,175 +2,18 @@
|
|||
/*
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2023 Thomas McKahan
|
||||
* Copyright (c) 2024 Linaro Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3588.dtsi"
|
||||
#include "rk3588-nanopc-t6.dtsi"
|
||||
|
||||
/ {
|
||||
model = "FriendlyElec NanoPC-T6";
|
||||
compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sys_led: led-0 {
|
||||
gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
label = "system-led";
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sys_led_pin>;
|
||||
};
|
||||
|
||||
usr_led: led-1 {
|
||||
gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
label = "user-led";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usr_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
|
||||
simple-audio-card,name = "realtek,rt5616-codec";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
|
||||
simple-audio-card,hp-pin-name = "Headphones";
|
||||
|
||||
simple-audio-card,widgets =
|
||||
"Headphone", "Headphones",
|
||||
"Microphone", "Microphone Jack";
|
||||
simple-audio-card,routing =
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR",
|
||||
"MIC1", "Microphone Jack",
|
||||
"Microphone Jack", "micbias1";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rt5616>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
/* vcc5v0_sys powers peripherals */
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
/* vcc4v0_sys powers the RK806, RK860's */
|
||||
vcc4v0_sys: vcc4v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc4v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <4000000>;
|
||||
regulator-max-microvolt = <4000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc-1v1-nldo-s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
};
|
||||
|
||||
vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3_pcie20";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vbus5v0_typec: vbus5v0-typec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&typec5v_pwren>;
|
||||
regulator-name = "vbus5v0_typec";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_m2_1_pwren>;
|
||||
regulator-name = "vcc3v3_pcie2x1l0";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_m2_0_pwren>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sd_s0: vcc3v3-sd-s0-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-low;
|
||||
gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_sd_s0";
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vdd_4g_3v3: vdd-4g-3v3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
|
|
@ -184,762 +27,14 @@ vdd_4g_3v3: vdd-4g-3v3-regulator {
|
|||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
gpio-line-names = /* GPIO0 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 C0-C7 */
|
||||
"", "", "", "",
|
||||
"HEADER_10", "HEADER_08", "HEADER_32", "",
|
||||
/* GPIO0 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names = /* GPIO1 A0-A7 */
|
||||
"HEADER_27", "HEADER_28", "", "",
|
||||
"", "", "", "HEADER_15",
|
||||
/* GPIO1 B0-B7 */
|
||||
"HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23",
|
||||
"HEADER_24", "HEADER_22", "", "",
|
||||
/* GPIO1 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO1 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "HEADER_05", "HEADER_03";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
gpio-line-names = /* GPIO2 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO2 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO2 C0-C7 */
|
||||
"", "CSI1_11", "CSI1_12", "",
|
||||
"", "", "", "",
|
||||
/* GPIO2 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
gpio-line-names = /* GPIO3 A0-A7 */
|
||||
"HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36",
|
||||
"HEADER_37", "", "DSI0_12", "",
|
||||
/* GPIO3 B0-B7 */
|
||||
"HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16",
|
||||
"HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12",
|
||||
/* GPIO3 C0-C7 */
|
||||
"DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13",
|
||||
"", "", "", "",
|
||||
/* GPIO3 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "DSI1_10", "", "";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
gpio-line-names = /* GPIO4 A0-A7 */
|
||||
"DSI1_08", "DSI1_14", "", "DSI1_12",
|
||||
"", "", "", "",
|
||||
/* GPIO4 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO4 C0-C7 */
|
||||
"", "", "", "",
|
||||
"CSI0_11", "CSI0_12", "", "",
|
||||
/* GPIO4 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
rockchip,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
clock-frequency = <200000>;
|
||||
status = "okay";
|
||||
|
||||
fusb302: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&usbc0_int>;
|
||||
pinctrl-names = "default";
|
||||
vbus-supply = <&vbus5v0_typec>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
data-role = "dual";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
op-sink-microwatt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
clock-frequency = <200000>;
|
||||
status = "okay";
|
||||
|
||||
rt5616: codec@1b {
|
||||
compatible = "realtek,rt5616";
|
||||
reg = <0x1b>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
#sound-dai-cells = <0>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
|
||||
port {
|
||||
rt5616_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s0_8ch_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* connected with MIPI-CSI1 */
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
pinctrl-0 = <&i2c8m2_xfer>;
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
|
||||
i2s0_8ch_p0: port {
|
||||
i2s0_8ch_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&rt5616_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l0 {
|
||||
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc_3v3_pcie20>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_0_rst>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l1 {
|
||||
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_1_rst>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc_3v3_pcie20>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_2_rst>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
gpio-leds {
|
||||
sys_led_pin: sys-led-pin {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usr_led_pin: usr-led-pin {
|
||||
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie2_0_rst: pcie2-0-rst {
|
||||
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_1_rst: pcie2-1-rst {
|
||||
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_2_rst: pcie2-2-rst {
|
||||
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie_m2_0_pwren: pcie-m20-pwren {
|
||||
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie_m2_1_pwren: pcie-m21-pwren {
|
||||
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
pin_4g_lte_pwren: 4g-lte-pwren {
|
||||
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
typec5v_pwren: typec5v-pwren {
|
||||
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usbc0_int: usbc0-int {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-0 = <&pwm1m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
no-mmc;
|
||||
no-sdio;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd_s0>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
num-cs = <1>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc4v0_sys>;
|
||||
vcc2-supply = <&vcc4v0_sys>;
|
||||
vcc3-supply = <&vcc4v0_sys>;
|
||||
vcc4-supply = <&vcc4v0_sys>;
|
||||
vcc5-supply = <&vcc4v0_sys>;
|
||||
vcc6-supply = <&vcc4v0_sys>;
|
||||
vcc7-supply = <&vcc4v0_sys>;
|
||||
vcc8-supply = <&vcc4v0_sys>;
|
||||
vcc9-supply = <&vcc4v0_sys>;
|
||||
vcc10-supply = <&vcc4v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc4v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc4v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-init-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
phy-supply = <&vdd_4g_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
1042
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
Normal file
1042
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
|
|
@ -105,6 +105,13 @@ led {
|
|||
};
|
||||
};
|
||||
|
||||
rfkill {
|
||||
compatible = "rfkill-gpio";
|
||||
label = "rfkill-pcie-wlan";
|
||||
radio-type = "wlan";
|
||||
shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
pinctrl-names = "default";
|
||||
|
|
|
|||
|
|
@ -65,6 +65,18 @@ vcc12v_dcin: vcc12v-dcin-regulator {
|
|||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v3_wf: vcc3v3-wf-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_wf";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&pow_en>;
|
||||
pinctrl-names = "default";
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
|
|
@ -114,6 +126,10 @@ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
|||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -293,6 +309,14 @@ rgmii_phy1: ethernet-phy@1 {
|
|||
};
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
pinctrl-0 = <&pcie20x1m0_pins>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_wf>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
io_led: io-led {
|
||||
|
|
@ -300,6 +324,12 @@ io_led: io-led {
|
|||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pow_en: pow-en {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
power {
|
||||
vcc_5v0_en: vcc-5v0-en {
|
||||
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
|
|
@ -317,28 +347,6 @@ vcc5v0_host_en: vcc5v0-host-en {
|
|||
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifibt {
|
||||
wl_reset: wl-reset {
|
||||
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
wl_dis: wl-dis {
|
||||
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
|
||||
wl_wake_host: wl-wake-host {
|
||||
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
bt_dis: bt-dis {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
|
||||
bt_wake_host: bt-wake-host {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm3 {
|
||||
|
|
@ -754,8 +762,6 @@ &usbdp_phy0 {
|
|||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl_reset &wl_dis &wl_wake_host &bt_dis &bt_wake_host>;
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user