mirror of
https://github.com/torvalds/linux.git
synced 2026-06-01 02:53:36 +02:00
New boards rk3576-evb1, H96 Max V58 TV Box (rk3588), BigTreeTech CB2
(SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM), Orange Pi 5 Max. A interesting case is the Radxa E52C using a soc called rk3582. This is rk3588-variant where some cpu cores are disabled during production and the bootloader needs to read the available cores from efuses and adapt the DT it hands over to the kernel. New supported peripherals are just the naneng combophy + the usb controllers using them on the rk3576 as well as the arm,smmu attached to the PCI controller on rk3588. And finally there are of course a number of board-specific enablements and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi 5+ etc. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmeBsd0QHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgb3ACACUZKG31p8IQ2dzkbR+0HZSNef3F2q+ENcP /NLqeLSzMbs2FbyWu4yRrymrQyeBsIsrH0/catdoj+Z5fMp8VvD6eabN6u/35pEy Tl0K8PgYs6FAQ4Lm4dl0Z+D/g7R1/uOphQdRbrcsFKnfC4rXGkXrWb9fbg1ejN9A tOPORXVXXOv4aCMV7gmyC5WdlkFTjpG0prgFf88edj1LQSTfk9mRE0G+tTe9jvQq FfDqCF71ckODrV2yrYJMw6+7t/oi0ewxfM8J33dofs8xxDjT5kw+3FR9PxCe8cBL NnyjC0ntYykgDWTrTJSDeETto2zA4BoRU4LSizD+ZZQrcUZirVj6 =4vmj -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmeJF68ACgkQYKtH/8kJ UicNhQ/+Izw9YQp3Bf2Mi8abOY19IoqyL2m1nVlFG6ipylJMNbrb+FOZeR41aNsV rUxh/q0C0kYQ7QkgL1N3BfRu9d6wLicHqpIsjmLKssJmn040SpbDeOjm1HSKp2F2 YwjX3vO4fWJS5D03FdLEuK+FeaoHIUOvb5H+fXGswZyOQIvdAXqWcRAHd//1DPVI 1lQBQbKmRwBndnOSq4WwV1M+CwsYSGa2v4AFUyNmHc1Qe2sMozkHvUoK8e1ccMpO r5iPA244udmVi0vIB0E1CEKUuw+XwnRx0UQYt+FLQiFWadh/mSfP+b3k+Rd6U5ir ZZ7FIIfcZTZVpv8QbSGWUXiPx8sLQG31lfbBEXSKb9Am/tN4fAP1Ckq+kWhyDJRB YORO8NbJYLR9ZGcD19KWQNRErAKLbtlq5De35kpOaNe9OEcFTCTitf8TK2ZkHv93 ImOQyv8wPjNFgwD7yqBAPcYoR/iCIAb5LO7otykzku5CiepmSlvAz93FmqUMkcS/ s4Tt0Yijc2y++zKOx2oI7FG2S/nk0ZUJg51d42MyRtjP5aMED9jMAC8n3MywuBf9 /akJVYxdv/q8+drDZbgyoSRhPN1O3BT1dh2LGtBJaI4qugVvkFS8j0FthGjE1g89 fbbbNRUB0A2714X5uoozwaURJ1jl2GrGiqh3xAs+NqoYRP6sD0E= =c5iW -----END PGP SIGNATURE----- Merge tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards rk3576-evb1, H96 Max V58 TV Box (rk3588), BigTreeTech CB2 (SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM), Orange Pi 5 Max. A interesting case is the Radxa E52C using a soc called rk3582. This is rk3588-variant where some cpu cores are disabled during production and the bootloader needs to read the available cores from efuses and adapt the DT it hands over to the kernel. New supported peripherals are just the naneng combophy + the usb controllers using them on the rk3576 as well as the arm,smmu attached to the PCI controller on rk3588. And finally there are of course a number of board-specific enablements and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi 5+ etc. * tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits) arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM dt-bindings: arm: rockchip: Add Firefly ITX-3588J board arm64: dts: rockchip: Add Orange Pi 5 Max board dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi arm64: dts: rockchip: add WLAN to rk3588-evb1 controller arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes arm64: dts: rockchip: enable hdmi out audio on wolfvision pf5 arm64: dts: rockchip: fix num-channels property of wolfvision pf5 mic arm64: dts: rockchip: Enable the USB 3.0 port on NanoPi R6C/R6S arm64: dts: rockchip: Add FRAM MB85RS128TY to rk3568-mecsbc arm64: dts: rockchip: Remove unused i2c2 node from rk3568-mecsbc arm64: dts: rockchip: Fix PCIe3 handling for Edgeble-6TOPS Modules arm64: dts: rockchip: Add Radxa E52C dt-bindings: arm: rockchip: Add Radxa E52C arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2 dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2 arm64: dts: rockchip: Enable USB 3.0 ports on orangepi-5-plus arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC ... Link: https://lore.kernel.org/r/2193001.3Lj2Plt8kZ@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
29a0522094
|
|
@ -81,6 +81,17 @@ properties:
|
|||
- const: azw,beelink-a1
|
||||
- const: rockchip,rk3328
|
||||
|
||||
- description: BigTreeTech CB2 Manta M4/8P
|
||||
items:
|
||||
- const: bigtreetech,cb2-manta
|
||||
- const: bigtreetech,cb2
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: BigTreeTech Pi 2
|
||||
items:
|
||||
- const: bigtreetech,pi2
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: bq Curie 2 tablet
|
||||
items:
|
||||
- const: mundoreader,bq-curie2
|
||||
|
|
@ -167,6 +178,13 @@ properties:
|
|||
- const: engicam,px30-core
|
||||
- const: rockchip,px30
|
||||
|
||||
- description: Firefly Core-3588J-based boards
|
||||
items:
|
||||
- enum:
|
||||
- firefly,itx-3588j
|
||||
- const: firefly,core-3588j
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard
|
||||
items:
|
||||
- const: firefly,px30-jd4-core-mb
|
||||
|
|
@ -597,6 +615,11 @@ properties:
|
|||
- const: google,veyron
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: H96 Max V58 TV Box
|
||||
items:
|
||||
- const: haochuangyi,h96-max-v58
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Haoyu MarsBoard RK3066
|
||||
items:
|
||||
- const: haoyu,marsboard-rk3066
|
||||
|
|
@ -812,6 +835,12 @@ properties:
|
|||
- const: radxa,e20c
|
||||
- const: rockchip,rk3528
|
||||
|
||||
- description: Radxa E52C
|
||||
items:
|
||||
- const: radxa,e52c
|
||||
- const: rockchip,rk3582
|
||||
- const: rockchip,rk3588s
|
||||
|
||||
- description: Radxa Rock
|
||||
items:
|
||||
- const: radxa,rock
|
||||
|
|
@ -1006,6 +1035,21 @@ properties:
|
|||
- const: rockchip,rk3399-sapphire-excavator
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Rockchip RK3566 BOX Evaluation Demo board
|
||||
items:
|
||||
- const: rockchip,rk3566-box-demo
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Rockchip RK3568 Evaluation board
|
||||
items:
|
||||
- const: rockchip,rk3568-evb1-v10
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Rockchip RK3576 Evaluation board
|
||||
items:
|
||||
- const: rockchip,rk3576-evb1-v10
|
||||
- const: rockchip,rk3576
|
||||
|
||||
- description: Rockchip RK3588 Evaluation board
|
||||
items:
|
||||
- const: rockchip,rk3588-evb1-v10
|
||||
|
|
@ -1026,6 +1070,23 @@ properties:
|
|||
- const: rockchip,rk3588-toybrick-x0
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Sinovoip RK3308 Banana Pi P2 Pro
|
||||
items:
|
||||
- const: sinovoip,rk3308-bpi-p2pro
|
||||
- const: rockchip,rk3308
|
||||
|
||||
- description: Sinovoip RK3568 Banana Pi R2 Pro
|
||||
items:
|
||||
- const: sinovoip,rk3568-bpi-r2pro
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Sonoff iHost Smart Home Hub
|
||||
items:
|
||||
- const: itead,sonoff-ihost
|
||||
- enum:
|
||||
- rockchip,rv1126
|
||||
- rockchip,rv1109
|
||||
|
||||
- description: Theobroma Systems PX30-uQ7 with Haikou baseboard
|
||||
items:
|
||||
- const: tsd,px30-ringneck-haikou
|
||||
|
|
@ -1075,9 +1136,11 @@ properties:
|
|||
- const: xunlong,orangepi-3b
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Xunlong Orange Pi 5 Plus
|
||||
- description: Xunlong Orange Pi 5 Max/Plus
|
||||
items:
|
||||
- const: xunlong,orangepi-5-plus
|
||||
- enum:
|
||||
- xunlong,orangepi-5-max
|
||||
- xunlong,orangepi-5-plus
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Xunlong Orange Pi R1 Plus / LTS
|
||||
|
|
@ -1099,33 +1162,6 @@ properties:
|
|||
- const: zkmagic,a95x-z2
|
||||
- const: rockchip,rk3318
|
||||
|
||||
- description: Rockchip RK3566 BOX Evaluation Demo board
|
||||
items:
|
||||
- const: rockchip,rk3566-box-demo
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Rockchip RK3568 Evaluation board
|
||||
items:
|
||||
- const: rockchip,rk3568-evb1-v10
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Sinovoip RK3308 Banana Pi P2 Pro
|
||||
items:
|
||||
- const: sinovoip,rk3308-bpi-p2pro
|
||||
- const: rockchip,rk3308
|
||||
|
||||
- description: Sinovoip RK3568 Banana Pi R2 Pro
|
||||
items:
|
||||
- const: sinovoip,rk3568-bpi-r2pro
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Sonoff iHost Smart Home Hub
|
||||
items:
|
||||
- const: itead,sonoff-ihost
|
||||
- enum:
|
||||
- rockchip,rv1126
|
||||
- rockchip,rv1109
|
||||
|
||||
additionalProperties: true
|
||||
|
||||
...
|
||||
|
|
|
|||
|
|
@ -23,6 +23,7 @@ properties:
|
|||
- rockchip,rk3576-bigcore-grf
|
||||
- rockchip,rk3576-cci-grf
|
||||
- rockchip,rk3576-gpu-grf
|
||||
- rockchip,rk3576-hdptxphy-grf
|
||||
- rockchip,rk3576-litcore-grf
|
||||
- rockchip,rk3576-npu-grf
|
||||
- rockchip,rk3576-php-grf
|
||||
|
|
|
|||
|
|
@ -111,6 +111,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lckfb-tspi.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-cb2-manta.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-pi2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
|
||||
|
|
@ -129,6 +131,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-w3.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
|
||||
|
|
@ -137,11 +141,14 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-firefly-itx-3588j.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-h96-max-v58.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
|
||||
|
|
|
|||
|
|
@ -74,6 +74,23 @@ vcc_io: regulator-3v3-vcc-io {
|
|||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
/*
|
||||
* HW revision prior to v1.2 must pull GPIO4_D6 low to access sdmmc.
|
||||
* This is modeled as an always-on active low fixed regulator.
|
||||
*/
|
||||
vcc_sd: regulator-3v3-vcc-sd {
|
||||
compatible = "regulator-fixed";
|
||||
gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_2030>;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-5v0-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
|
|
@ -181,6 +198,12 @@ pwr_led: pwr-led {
|
|||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
sdmmc_2030: sdmmc-2030 {
|
||||
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_reg_on: wifi-reg-on {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
|
|
@ -233,7 +256,7 @@ &sdmmc {
|
|||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
vmmc-supply = <&vcc_io>;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -110,7 +110,6 @@ &gmac2io {
|
|||
phy-supply = <&vcc_io>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmiim1_pins>;
|
||||
snps,aal;
|
||||
snps,pbl = <0x4>;
|
||||
tx_delay = <0x26>;
|
||||
rx_delay = <0x11>;
|
||||
|
|
|
|||
|
|
@ -142,7 +142,6 @@ &gmac2io {
|
|||
phy-supply = <&vcc_io_33>;
|
||||
pinctrl-0 = <&rgmiim1_pins>;
|
||||
pinctrl-names = "default";
|
||||
snps,aal;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
|
|
|
|||
|
|
@ -113,7 +113,6 @@ &gmac2io {
|
|||
phy-supply = <&vcc_io>;
|
||||
pinctrl-0 = <&rgmiim1_pins>;
|
||||
pinctrl-names = "default";
|
||||
snps,aal;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
|
|
|
|||
|
|
@ -153,9 +153,6 @@ &gmac2io {
|
|||
phy-supply = <&vcc_io>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmiim1_pins>;
|
||||
snps,aal;
|
||||
snps,rxpbl = <0x4>;
|
||||
snps,txpbl = <0x4>;
|
||||
tx_delay = <0x26>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -144,7 +144,6 @@ &gmac2io {
|
|||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmiim1_pins>;
|
||||
snps,force_thresh_dma_mode;
|
||||
snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
|
|
|
|||
|
|
@ -182,7 +182,7 @@ &gmac {
|
|||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x10>;
|
||||
rx_delay = <0x10>;
|
||||
rx_delay = <0x23>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,10 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-bigtreetech-cb2.dtsi"
|
||||
|
||||
/ {
|
||||
model = "BigTreeTech CB2";
|
||||
compatible = "bigtreetech,cb2-manta", "bigtreetech,cb2", "rockchip,rk3566";
|
||||
};
|
||||
904
arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
Normal file
904
arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
Normal file
|
|
@ -0,0 +1,904 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc0;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
ext_cam_clk: clock-25000000-cam {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <25000000>;
|
||||
clock-output-names = "ext_cam_clk";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
can_mcp2515_osc: clock-8000000-mcp2515 {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <8000000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-on";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 =<&blue_led>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 =<&heartbeat_led>;
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
#cooling-cells = <2>;
|
||||
cooling-levels = <0 50 100 150 200 255>;
|
||||
pwms = <&pwm7 0 50000 0>;
|
||||
};
|
||||
|
||||
rk809-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "Analog RK809";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
post-power-on-delay-ms = <200>;
|
||||
reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vbus: regulator-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbus";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: regulator-vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: regulator-vcc3v3-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_drv>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vbus>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host3";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: regulator-vcc5v0-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_otg_en>;
|
||||
regulator-name = "vcc5v0_otg3";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vbus>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: regulator-vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vbus>;
|
||||
};
|
||||
|
||||
vcc5v0_usb2b: regulator-vcc5v0-usb2b {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb2b_en>;
|
||||
regulator-name = "vcc5v0_usb2b";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_usb2t: regulator-vcc5v0-usb2t {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb2t_en>;
|
||||
regulator-name = "vcc5v0_usb2t";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_5v: regulator-vcc-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc_sd: regulator-vcc-sd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcc_sd";
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "input";
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m0_miim
|
||||
&gmac1m0_tx_bus2
|
||||
&gmac1m0_rx_bus2
|
||||
&gmac1m0_rgmii_clk
|
||||
&gmac1m0_clkinout
|
||||
&gmac1m0_rgmii_bus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy0: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reset-delay-us = <20000>;
|
||||
reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
|
||||
reset-post-delay-us = <100000>;
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-initial-mode = <1>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
#clock-cells = <1>;
|
||||
clock-names = "mclk";
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
pinctrl-names = "default", "pmic-sleep",
|
||||
"pmic-power-off", "pmic-reset";
|
||||
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
||||
#sound-dai-cells = <0>;
|
||||
system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_logic";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_gpu";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_npu";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_image";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda_0v9";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vccio_acodec";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca_1v8";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_image";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_3v3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
codec {
|
||||
rockchip,mic-in-differential;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2m1_xfer>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
|
||||
tft_tp: touchscreen@48 {
|
||||
compatible = "ti,tsc2007";
|
||||
reg = <0x48>;
|
||||
status = "okay";
|
||||
ti,x-plate-ohms = <660>;
|
||||
ti,rt-thr = <3000>;
|
||||
ti,fuzzx = <32>;
|
||||
ti,fuzzy = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
|
||||
|
||||
can_mcp2515: can@0 {
|
||||
compatible = "microchip,mcp2515";
|
||||
reg = <0x00>;
|
||||
clocks = <&can_mcp2515_osc>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcp2515_int_pin>;
|
||||
spi-max-frequency = <10000000>;
|
||||
vdd-supply = <&vcc3v3_sys>;
|
||||
xceiver-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi3m1_cs0 &spi3m1_pins>;
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_reset_h>;
|
||||
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bt {
|
||||
bt_enable: bt-enable-h {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_host_wake: bt-host-wake-l {
|
||||
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake: bt-wake-l {
|
||||
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie_drv: pcie-drv {
|
||||
rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie_reset_h: pcie-reset-h {
|
||||
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_host_wake: wifi-host-wake-l {
|
||||
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_otg_en: vcc5v0-otg-en {
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_usb2t_en: vcc5v0-usb2t-en {
|
||||
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_usb2b_en: vcc5v0-usb2b-en {
|
||||
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
work-led {
|
||||
heartbeat_led: led-heartbeat {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
blue_led: led-blue {
|
||||
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
mcp2515 {
|
||||
mcp2515_int_pin: mcp2515-int-pin {
|
||||
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vcc_3v3>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_3v3>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0m1_pins>;
|
||||
};
|
||||
|
||||
&pwm12 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm12m1_pins>;
|
||||
};
|
||||
|
||||
&pwm13 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm13m1_pins>;
|
||||
};
|
||||
|
||||
&pwm14 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm14m1_pins>;
|
||||
};
|
||||
|
||||
&pwm15 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm15m1_pins>;
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
max-frequency = <150000000>;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
/* WiFi & BT combo module AMPAK AP6256 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <150000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
status = "okay";
|
||||
|
||||
sdio-wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake>;
|
||||
brcm,drive-strength = <10>;
|
||||
};
|
||||
};
|
||||
|
||||
&sfc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
dma-names = "tx","rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4345c5";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcca1v8_pmu>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart5m1_xfer>;
|
||||
};
|
||||
|
||||
&uart7 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7m2_xfer>;
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_usb2t>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb2b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
extcon = <&usb2phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
10
arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dts
Normal file
10
arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dts
Normal file
|
|
@ -0,0 +1,10 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-bigtreetech-cb2.dtsi"
|
||||
|
||||
/ {
|
||||
model = "BigTreeTech Pi 2";
|
||||
compatible = "bigtreetech,pi2", "rockchip,rk3566";
|
||||
};
|
||||
|
|
@ -206,12 +206,6 @@ regulator-state-mem {
|
|||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2m0_xfer>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3m0_xfer>;
|
||||
|
|
@ -357,6 +351,19 @@ &sdmmc0 {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
/* use hardware chipselect on cs0 (cs1 unconnected) */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0m0_pins>, <&spi0m0_cs0>;
|
||||
status = "okay";
|
||||
|
||||
fram@0 {
|
||||
compatible = "fujitsu,mb85rs128ty";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <33000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
|
|
|
|||
|
|
@ -50,6 +50,7 @@ led-0 {
|
|||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd1:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd1_led_pin>;
|
||||
|
|
@ -59,6 +60,7 @@ led-1 {
|
|||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd2:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd2_led_pin>;
|
||||
|
|
@ -68,6 +70,7 @@ led-2 {
|
|||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd3:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd3_led_pin>;
|
||||
|
|
@ -77,6 +80,7 @@ led-3 {
|
|||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd4:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd4_led_pin>;
|
||||
|
|
@ -483,6 +487,54 @@ rgmii_phy0: ethernet-phy@0 {
|
|||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* The MCU can provide system temperature too, but only by polling and of
|
||||
* course also cannot set trip points. So attach to the cpu thermal-zone
|
||||
* instead to control the fan.
|
||||
*/
|
||||
&cpu_thermal {
|
||||
trips {
|
||||
case_fan0: case-fan0 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <35000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
case_fan1: case-fan1 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <45000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
case_fan2: case-fan2 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <65000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
/*
|
||||
* Always provide some air movement, due to small case
|
||||
* full of harddrives.
|
||||
*/
|
||||
map1 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
trip = <&case_fan0>;
|
||||
};
|
||||
|
||||
map2 {
|
||||
cooling-device = <&fan 2 3>;
|
||||
trip = <&case_fan1>;
|
||||
};
|
||||
|
||||
map3 {
|
||||
cooling-device = <&fan 4 THERMAL_NO_LIMIT>;
|
||||
trip = <&case_fan2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
data-lanes = <1 2>;
|
||||
status = "okay";
|
||||
|
|
@ -582,6 +634,15 @@ &tsadc {
|
|||
*/
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
|
||||
mcu {
|
||||
compatible = "qnap,ts433-mcu";
|
||||
|
||||
fan: fan-0 {
|
||||
#cooling-cells = <2>;
|
||||
cooling-levels = <0 64 89 128 166 204 221 238>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ hdmi_tx_5v: regulator-hdmi-tx-5v {
|
|||
|
||||
pdm_codec: pdm-codec {
|
||||
compatible = "dmic-codec";
|
||||
num-channels = <1>;
|
||||
num-channels = <2>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
|
|
@ -167,6 +167,10 @@ hdmi_tx_out: endpoint {
|
|||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -414,6 +418,10 @@ &i2c4 {
|
|||
pinctrl-0 = <&i2c4m1_xfer>;
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pdm {
|
||||
pinctrl-0 = <&pdmm0_clk
|
||||
&pdmm0_sdi0>;
|
||||
|
|
|
|||
731
arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
Normal file
731
arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
Normal file
|
|
@ -0,0 +1,731 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3576.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3576 EVB V10 Board";
|
||||
compatible = "rockchip,rk3576-evb1-v10", "rockchip,rk3576";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial0:1500000n8";
|
||||
};
|
||||
|
||||
adc_keys: adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-back {
|
||||
label = "back";
|
||||
linux,code = <KEY_BACK>;
|
||||
press-threshold-microvolt = <1235000>;
|
||||
};
|
||||
|
||||
button-menu {
|
||||
label = "menu";
|
||||
linux,code = <KEY_MENU>;
|
||||
press-threshold-microvolt = <890000>;
|
||||
};
|
||||
|
||||
button-vol-down {
|
||||
label = "volume down";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
press-threshold-microvolt = <417000>;
|
||||
};
|
||||
|
||||
button-vol-up {
|
||||
label = "volume up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
press-threshold-microvolt = <17000>;
|
||||
};
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
work_led: led-0 {
|
||||
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
vbus5v0_typec: regulator-vbus5v0-typec {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbus5v0_typec";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_device>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_otg0_pwren>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: regulator-vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc1v2_ufs_vccq_s0: regulator-vcc1v2-ufs-vccq-s0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v2_ufs_vccq_s0";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_ufs_vccq2_s0";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_lcd_n: regulator-vcc3v3-lcd0-n {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_lcd0_n";
|
||||
regulator-boot-on;
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc_3v3_s0>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie0: regulator-vcc3v3-pcie0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie1";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_rtc_s5";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_device: regulator-vcc5v0-device {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_device";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_device>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_host_pwren>;
|
||||
};
|
||||
|
||||
vcc_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_1v8_s0: regulator-vcc-1v8-s0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8_s3>;
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_2v0_pldo_s3";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_3v3_s0: regulator-vcc-3v3-s0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc_ufs_s0: regulator-vcc-ufs-s0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_ufs_s0";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big_s0>;
|
||||
};
|
||||
|
||||
&combphy1_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
clock_in_out = "output";
|
||||
phy-mode = "rgmii-rxid";
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð0m0_miim
|
||||
ð0m0_tx_bus2
|
||||
ð0m0_rx_bus2
|
||||
ð0m0_rgmii_clk
|
||||
ð0m0_rgmii_bus
|
||||
ðm0_clk0_25m_out>;
|
||||
snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
tx_delay = <0x21>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii-rxid";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð1m0_miim
|
||||
ð1m0_tx_bus2
|
||||
ð1m0_rx_bus2
|
||||
ð1m0_rgmii_clk
|
||||
ð1m0_rgmii_bus
|
||||
ðm0_clk1_25m_out>;
|
||||
snps,reset-gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
tx_delay = <0x20>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
rk806: pmic@23 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x23>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc5-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc_sys>;
|
||||
vcc8-supply = <&vcc_sys>;
|
||||
vcc9-supply = <&vcc_sys>;
|
||||
vcc10-supply = <&vcc_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs1_slp: dvs1-slp-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun1";
|
||||
};
|
||||
|
||||
rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun2";
|
||||
};
|
||||
|
||||
rk806_dvs1_rst: dvs1-rst-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun3";
|
||||
};
|
||||
|
||||
rk806_dvs2_slp: dvs2-slp-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun1";
|
||||
};
|
||||
|
||||
rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun2";
|
||||
};
|
||||
|
||||
rk806_dvs2_rst: dvs2-rst-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun3";
|
||||
};
|
||||
|
||||
rk806_dvs2_dvs: dvs2-dvs-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun4";
|
||||
};
|
||||
|
||||
rk806_dvs2_gpio: dvs2-gpio-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun5";
|
||||
};
|
||||
|
||||
rk806_dvs3_slp: dvs3-slp-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun1";
|
||||
};
|
||||
|
||||
rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun2";
|
||||
};
|
||||
|
||||
rk806_dvs3_rst: dvs3-rst-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun3";
|
||||
};
|
||||
|
||||
rk806_dvs3_dvs: dvs3-dvs-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun4";
|
||||
};
|
||||
|
||||
rk806_dvs3_gpio: dvs3-gpio-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun5";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_cpu_big_s0: dcdc-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_big_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu_s0: dcdc-reg2 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu_s0: dcdc-reg5 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_logic_s0: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-name = "vdd_logic_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pldo2_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_pldo2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "vdda_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcca_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdda_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v75_hdmi_s0: nldo-reg3 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <837500>;
|
||||
regulator-max-microvolt = <837500>;
|
||||
regulator-name = "vdda0v75_hdmi_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdda_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdda_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
clocks = <&cru REFCLKO25M_GMAC0_OUT>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
clocks = <&cru REFCLKO25M_GMAC1_OUT>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
usb {
|
||||
usb_host_pwren: usb-host-pwren {
|
||||
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usb_otg0_pwren: usb-otg0-pwren {
|
||||
rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usbc0_int: usbc0-int {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
phy-supply = <&vbus5v0_typec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy {
|
||||
rockchip,dp-lane-mux = <2 3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_drd0_dwc3 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_drd1_dwc3 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -445,6 +445,58 @@ soc {
|
|||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
usb_drd0_dwc3: usb@23000000 {
|
||||
compatible = "rockchip,rk3576-dwc3", "snps,dwc3";
|
||||
reg = <0x0 0x23000000 0x0 0x400000>;
|
||||
clocks = <&cru CLK_REF_USB3OTG0>,
|
||||
<&cru CLK_SUSPEND_USB3OTG0>,
|
||||
<&cru ACLK_USB3OTG0>;
|
||||
clock-names = "ref_clk", "suspend_clk", "bus_clk";
|
||||
interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
|
||||
power-domains = <&power RK3576_PD_USB>;
|
||||
resets = <&cru SRST_A_USB3OTG0>;
|
||||
dr_mode = "otg";
|
||||
phys = <&u2phy0_otg>, <&usbdp_phy PHY_TYPE_USB3>;
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
phy_type = "utmi_wide";
|
||||
snps,dis_enblslpm_quirk;
|
||||
snps,dis-u1-entry-quirk;
|
||||
snps,dis-u2-entry-quirk;
|
||||
snps,dis-u2-freeclk-exists-quirk;
|
||||
snps,dis-del-phy-power-chg-quirk;
|
||||
snps,dis-tx-ipgap-linecheck-quirk;
|
||||
snps,parkmode-disable-hs-quirk;
|
||||
snps,parkmode-disable-ss-quirk;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_drd1_dwc3: usb@23400000 {
|
||||
compatible = "rockchip,rk3576-dwc3", "snps,dwc3";
|
||||
reg = <0x0 0x23400000 0x0 0x400000>;
|
||||
clocks = <&cru CLK_REF_USB3OTG1>,
|
||||
<&cru CLK_SUSPEND_USB3OTG1>,
|
||||
<&cru ACLK_USB3OTG1>;
|
||||
clock-names = "ref_clk", "suspend_clk", "bus_clk";
|
||||
interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
|
||||
power-domains = <&power RK3576_PD_PHP>;
|
||||
resets = <&cru SRST_A_USB3OTG1>;
|
||||
dr_mode = "otg";
|
||||
phys = <&u2phy1_otg>, <&combphy1_psu PHY_TYPE_USB3>;
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
phy_type = "utmi_wide";
|
||||
snps,dis_enblslpm_quirk;
|
||||
snps,dis-u1-entry-quirk;
|
||||
snps,dis-u2-entry-quirk;
|
||||
snps,dis-u2-freeclk-exists-quirk;
|
||||
snps,dis-del-phy-power-chg-quirk;
|
||||
snps,dis-tx-ipgap-linecheck-quirk;
|
||||
snps,dis_rxdet_inp3_quirk;
|
||||
snps,parkmode-disable-hs-quirk;
|
||||
snps,parkmode-disable-ss-quirk;
|
||||
dma-coherent;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sys_grf: syscon@2600a000 {
|
||||
compatible = "rockchip,rk3576-sys-grf", "syscon";
|
||||
reg = <0x0 0x2600a000 0x0 0x2000>;
|
||||
|
|
@ -515,6 +567,65 @@ usbdpphy_grf: syscon@2602c000 {
|
|||
reg = <0x0 0x2602c000 0x0 0x2000>;
|
||||
};
|
||||
|
||||
usb2phy_grf: syscon@2602e000 {
|
||||
compatible = "rockchip,rk3576-usb2phy-grf", "syscon", "simple-mfd";
|
||||
reg = <0x0 0x2602e000 0x0 0x4000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
u2phy0: usb2-phy@0 {
|
||||
compatible = "rockchip,rk3576-usb2phy";
|
||||
reg = <0x0 0x10>;
|
||||
resets = <&cru SRST_OTGPHY_0>, <&cru SRST_P_USBPHY_GRF_0>;
|
||||
reset-names = "phy", "apb";
|
||||
clocks = <&cru CLK_PHY_REF_SRC>,
|
||||
<&cru ACLK_MMU2>,
|
||||
<&cru ACLK_SLV_MMU2>;
|
||||
clock-names = "phyclk", "aclk", "aclk_slv";
|
||||
clock-output-names = "usb480m_phy0";
|
||||
#clock-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
#phy-cells = <0>;
|
||||
interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "otg-bvalid", "otg-id", "linestate";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
u2phy1: usb2-phy@2000 {
|
||||
compatible = "rockchip,rk3576-usb2phy";
|
||||
reg = <0x2000 0x10>;
|
||||
resets = <&cru SRST_OTGPHY_1>, <&cru SRST_P_USBPHY_GRF_1>;
|
||||
reset-names = "phy", "apb";
|
||||
clocks = <&cru CLK_PHY_REF_SRC>,
|
||||
<&cru ACLK_MMU1>,
|
||||
<&cru ACLK_SLV_MMU1>;
|
||||
clock-names = "phyclk", "aclk", "aclk_slv";
|
||||
clock-output-names = "usb480m_phy1";
|
||||
#clock-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
#phy-cells = <0>;
|
||||
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "otg-bvalid", "otg-id", "linestate";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vo1_grf: syscon@26036000 {
|
||||
compatible = "rockchip,rk3576-vo1-grf", "syscon";
|
||||
reg = <0x0 0x26036000 0x0 0x100>;
|
||||
clocks = <&cru PCLK_VO1_ROOT>;
|
||||
};
|
||||
|
||||
sdgmac_grf: syscon@26038000 {
|
||||
compatible = "rockchip,rk3576-sdgmac-grf", "syscon";
|
||||
reg = <0x0 0x26038000 0x0 0x1000>;
|
||||
|
|
@ -1587,6 +1698,64 @@ uart11: serial@2afd0000 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
combphy0_ps: phy@2b050000 {
|
||||
compatible = "rockchip,rk3576-naneng-combphy";
|
||||
reg = <0x0 0x2b050000 0x0 0x100>;
|
||||
#phy-cells = <1>;
|
||||
clocks = <&cru CLK_REF_PCIE0_PHY>,
|
||||
<&cru PCLK_PCIE2_COMBOPHY0>,
|
||||
<&cru PCLK_PCIE0>;
|
||||
clock-names = "ref", "apb", "pipe";
|
||||
assigned-clocks = <&cru CLK_REF_PCIE0_PHY>;
|
||||
assigned-clock-rates = <100000000>;
|
||||
resets = <&cru SRST_PCIE0_PIPE_PHY>,
|
||||
<&cru SRST_P_PCIE2_COMBOPHY0>;
|
||||
reset-names = "phy", "apb";
|
||||
rockchip,pipe-grf = <&php_grf>;
|
||||
rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
combphy1_psu: phy@2b060000 {
|
||||
compatible = "rockchip,rk3576-naneng-combphy";
|
||||
reg = <0x0 0x2b060000 0x0 0x100>;
|
||||
#phy-cells = <1>;
|
||||
clocks = <&cru CLK_REF_PCIE1_PHY>,
|
||||
<&cru PCLK_PCIE2_COMBOPHY1>,
|
||||
<&cru PCLK_PCIE1>;
|
||||
clock-names = "ref", "apb", "pipe";
|
||||
assigned-clocks = <&cru CLK_REF_PCIE1_PHY>;
|
||||
assigned-clock-rates = <100000000>;
|
||||
resets = <&cru SRST_PCIE1_PIPE_PHY>,
|
||||
<&cru SRST_P_PCIE2_COMBOPHY1>;
|
||||
reset-names = "phy", "apb";
|
||||
rockchip,pipe-grf = <&php_grf>;
|
||||
rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usbdp_phy: phy@2b010000 {
|
||||
compatible = "rockchip,rk3576-usbdp-phy";
|
||||
reg = <0x0 0x2b010000 0x0 0x10000>;
|
||||
#phy-cells = <1>;
|
||||
clocks = <&cru CLK_PHY_REF_SRC >,
|
||||
<&cru CLK_USBDP_COMBO_PHY_IMMORTAL>,
|
||||
<&cru PCLK_USBDPPHY>,
|
||||
<&u2phy0>;
|
||||
clock-names = "refclk", "immortal", "pclk", "utmi";
|
||||
resets = <&cru SRST_USBDP_COMBO_PHY_INIT>,
|
||||
<&cru SRST_USBDP_COMBO_PHY_CMN>,
|
||||
<&cru SRST_USBDP_COMBO_PHY_LANE>,
|
||||
<&cru SRST_USBDP_COMBO_PHY_PCS>,
|
||||
<&cru SRST_P_USBDPPHY>;
|
||||
reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
|
||||
rockchip,u2phy-grf = <&usb2phy_grf>;
|
||||
rockchip,usb-grf = <&usb_grf>;
|
||||
rockchip,usbdpphy-grf = <&usbdpphy_grf>;
|
||||
rockchip,vo-grf = <&vo1_grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sram: sram@3ff88000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x0 0x3ff88000 0x0 0x78000>;
|
||||
|
|
|
|||
743
arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts
Normal file
743
arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts
Normal file
|
|
@ -0,0 +1,743 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3588s.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa E52C";
|
||||
compatible = "radxa,e52c", "rockchip,rk3582", "rockchip,rk3588s";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
keys-0 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <18000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-0 {
|
||||
label = "Maskrom";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
keys-1 {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&btn_0>;
|
||||
|
||||
button-1 {
|
||||
label = "User";
|
||||
gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds-0 {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_0>;
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
leds-1 {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_LAN;
|
||||
linux,default-trigger = "netdev";
|
||||
pwms = <&pwm14 0 1000000 PWM_POLARITY_INVERTED>;
|
||||
max-brightness = <255>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_WAN;
|
||||
linux,default-trigger = "netdev";
|
||||
pwms = <&pwm11 0 1000000 PWM_POLARITY_INVERTED>;
|
||||
max-brightness = <255>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: regulator-1v1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc_sysin>;
|
||||
};
|
||||
|
||||
vcc_3v3_pmu: regulator-3v3-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc_3v3_s0: regulator-3v3-1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcca: regulator-4v0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcca";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <4000000>;
|
||||
regulator-max-microvolt = <4000000>;
|
||||
vin-supply = <&vcc_sysin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg0: regulator-5v0-0 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_otg_pwren_h>;
|
||||
regulator-name = "vcc5v0_usb_otg0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_sysin>;
|
||||
};
|
||||
|
||||
vcc_5v0: regulator-5v0-1 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc_5v0_pwren_h>;
|
||||
regulator-name = "vcc_5v0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_sysin>;
|
||||
};
|
||||
|
||||
vcc_sysin: regulator-5v0-2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sysin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* In the Rockchip RK3582 SoC, some CPU cores end up disabled
|
||||
* and unused because they're marked in the efuses as defective.
|
||||
* The disabling in the DT is performed by the boot loader.
|
||||
*/
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc_sysin>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc_sysin>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "belling,bl24c16a", "atmel,24c16";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
vcc-supply = <&vcc_3v3_pmu>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc_sysin>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "rtcic_32kout";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtc_int_l>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20x1_1_perstn_m1>;
|
||||
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc_3v3_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20x1_2_perstn_m0>;
|
||||
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc_3v3_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
keys {
|
||||
btn_0: button-0 {
|
||||
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_0: led-0 {
|
||||
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie20x1_1_perstn_m1: pcie-1 {
|
||||
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie20x1_2_perstn_m0: pcie-2 {
|
||||
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
vcc_5v0_pwren_h: regulator-5v0-1 {
|
||||
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc {
|
||||
rtc_int_l: rtc-0 {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb_otg_pwren_h: regulator-5v0-0 {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm11 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm11m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm14 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm14m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
vmmc-supply = <&vcc_3v3_s0>;
|
||||
vqmmc-supply = <&vcc_1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
no-sdio;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
spi-max-frequency = <1000000>;
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc_sysin>;
|
||||
vcc2-supply = <&vcc_sysin>;
|
||||
vcc3-supply = <&vcc_sysin>;
|
||||
vcc4-supply = <&vcc_sysin>;
|
||||
vcc5-supply = <&vcc_sysin>;
|
||||
vcc6-supply = <&vcc_sysin>;
|
||||
vcc7-supply = <&vcc_sysin>;
|
||||
vcc8-supply = <&vcc_sysin>;
|
||||
vcc9-supply = <&vcc_sysin>;
|
||||
vcc10-supply = <&vcc_sysin>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc_sysin>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcca>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: dcdc-reg1 {
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: dcdc-reg2 {
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_logic_s0: dcdc-reg3 {
|
||||
regulator-name = "vdd_logic_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: dcdc-reg4 {
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-name = "vcc_2v0_pldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg1 {
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8_s0: pldo-reg2 {
|
||||
regulator-name = "vcca_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_1v2_s0: pldo-reg3 {
|
||||
regulator-name = "vdda_1v2_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_3v3_s0: pldo-reg4 {
|
||||
regulator-name = "vcca_3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-name = "pldo6_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-name = "vdda_ddr_pll_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v75_s0: nldo-reg3 {
|
||||
regulator-name = "vdda_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v85_s0: nldo-reg4 {
|
||||
regulator-name = "vdda_0v85_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb_otg0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -555,7 +555,6 @@ mmu600_pcie: iommu@fc900000 {
|
|||
<GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
|
||||
#iommu-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mmu600_php: iommu@fcb00000 {
|
||||
|
|
@ -1686,6 +1685,7 @@ pcie2x1l1: pcie@fe180000 {
|
|||
linux,pci-domain = <3>;
|
||||
max-link-speed = <2>;
|
||||
msi-map = <0x3000 &its0 0x3000 0x1000>;
|
||||
iommu-map = <0x3000 &mmu600_pcie 0x3000 0x1000>;
|
||||
num-lanes = <1>;
|
||||
phys = <&combphy2_psu PHY_TYPE_PCIE>;
|
||||
phy-names = "pcie-phy";
|
||||
|
|
@ -1737,6 +1737,7 @@ pcie2x1l2: pcie@fe190000 {
|
|||
linux,pci-domain = <4>;
|
||||
max-link-speed = <2>;
|
||||
msi-map = <0x4000 &its0 0x4000 0x1000>;
|
||||
iommu-map = <0x4000 &mmu600_pcie 0x4000 0x1000>;
|
||||
num-lanes = <1>;
|
||||
phys = <&combphy0_ps PHY_TYPE_PCIE>;
|
||||
phy-names = "pcie-phy";
|
||||
|
|
|
|||
|
|
@ -10,6 +10,15 @@ chosen {
|
|||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
/* Unnamed gated oscillator: 100MHz,3.3V,3225 */
|
||||
pcie30_port0_refclk: pcie30_port1_refclk: pcie-oscillator {
|
||||
compatible = "gated-fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <100000000>;
|
||||
clock-output-names = "pcie30_refclk";
|
||||
vdd-supply = <&vcc3v3_pi6c_05>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie2x1l0";
|
||||
|
|
@ -19,26 +28,26 @@ vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
|
|||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie3x2: regulator-vcc3v3-pcie3x2 {
|
||||
vcc3v3_bkey: regulator-vcc3v3-bkey {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_HIGH>; /* PCIE_4G_PWEN */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3x2_vcc3v3_en>;
|
||||
regulator-name = "vcc3v3_pcie3x2";
|
||||
pinctrl-0 = <&pcie_4g_pwen>;
|
||||
regulator-name = "vcc3v3_bkey";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie3x4: regulator-vcc3v3-pcie3x4 {
|
||||
vcc3v3_pcie30: vcc3v3_pi6c_05: regulator-vcc3v3-pi6c-05 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; /* PCIE30x4_PWREN_H */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3x4_vcc3v3_en>;
|
||||
regulator-name = "vcc3v3_pcie3x4";
|
||||
pinctrl-0 = <&pcie30x4_pwren_h>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
|
|
@ -98,24 +107,52 @@ &pcie2x1l0 {
|
|||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* B-Key and E-Key */
|
||||
&pcie3x2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3x2_rst>;
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTn_M1_L */
|
||||
vpcie3v3-supply = <&vcc3v3_pcie3x2>;
|
||||
data-lanes = <1 1 2 2>;
|
||||
/* separate clock lines from the clock generator to phy and devices */
|
||||
rockchip,rx-common-refclk-mode = <0 0 0 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* M-Key */
|
||||
&pcie3x4 {
|
||||
&pcie3x2 {
|
||||
/*
|
||||
* The board has a "pcie_refclk" oscillator that needs enabling,
|
||||
* so add it to the list of clocks.
|
||||
*/
|
||||
clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
|
||||
<&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
|
||||
<&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>,
|
||||
<&pcie30_port1_refclk>;
|
||||
clock-names = "aclk_mst", "aclk_slv",
|
||||
"aclk_dbi", "pclk",
|
||||
"aux", "pipe",
|
||||
"ref";
|
||||
num-lanes = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3x4_rst>;
|
||||
pinctrl-0 = <&pcie30x2_perstn_m1_l>;
|
||||
reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* PCIE30X2_PERSTn_M1_L */
|
||||
vpcie3v3-supply = <&vcc3v3_pcie3x4>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* B-Key and E-Key */
|
||||
&pcie3x4 {
|
||||
/*
|
||||
* The board has a "pcie_refclk" oscillator that needs enabling,
|
||||
* so add it to the list of clocks.
|
||||
*/
|
||||
clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
|
||||
<&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
|
||||
<&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
|
||||
<&pcie30_port0_refclk>;
|
||||
clock-names = "aclk_mst", "aclk_slv",
|
||||
"aclk_dbi", "pclk",
|
||||
"aux", "pipe",
|
||||
"ref";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie30x4_perstn_m1_l>;
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTn_M1_L */
|
||||
vpcie3v3-supply = <&vcc3v3_bkey>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -127,20 +164,20 @@ pcie2_0_rst: pcie2-0-rst {
|
|||
};
|
||||
|
||||
pcie3 {
|
||||
pcie3x2_rst: pcie3x2-rst {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie3x2_vcc3v3_en: pcie3x2-vcc3v3-en {
|
||||
rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie3x4_rst: pcie3x4-rst {
|
||||
pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie3x4_vcc3v3_en: pcie3x4-vcc3v3-en {
|
||||
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
pcie_4g_pwen: pcie-4g-pwen {
|
||||
rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie30x4_pwren_h: pcie30x4-pwren-h {
|
||||
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -206,6 +206,28 @@ vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
|||
pinctrl-0 = <&vcc3v3_pcie30_en>;
|
||||
};
|
||||
|
||||
vcc3v3_pciewl_vbat: regulator-vcc3v3-pciewl-vbat {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "wlan-vbat";
|
||||
vin-supply = <&vcc_3v3_s0>;
|
||||
};
|
||||
|
||||
vcc3v3_wlan: regulator-vcc3v3-wlan {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_pwren>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "wlan-en";
|
||||
vin-supply = <&vcc3v3_pciewl_vbat>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
|
|
@ -249,12 +271,26 @@ vcc5v0_usb: regulator-vcc5v0-usb {
|
|||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usbdcin>;
|
||||
};
|
||||
|
||||
vccio_wl: regulator-vccio-wl {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "wlan-vddio";
|
||||
vin-supply = <&vcc_1v8_s0>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -440,6 +476,30 @@ rgmii_phy: ethernet-phy@1 {
|
|||
};
|
||||
};
|
||||
|
||||
&pcie2x1l0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_0_rst>, <&pcie2_0_wake>, <&pcie2_0_clkreq>, <&wifi_host_wake_irq>;
|
||||
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_wlan>;
|
||||
status = "okay";
|
||||
|
||||
pcie@0,0 {
|
||||
reg = <0x200000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
device_type = "pci";
|
||||
bus-range = <0x20 0x2f>;
|
||||
|
||||
wifi: wifi@0,0 {
|
||||
compatible = "pci14e4,449d";
|
||||
reg = <0x210000 0 0 0 0>;
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "lpo";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l1 {
|
||||
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
|
|
@ -494,6 +554,18 @@ hym8563_int: hym8563-int {
|
|||
};
|
||||
|
||||
pcie2 {
|
||||
pcie2_0_rst: pcie2-0-rst {
|
||||
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_0_wake: pcie2-0-wake {
|
||||
rockchip,pins = <4 RK_PA4 4 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_0_clkreq: pcie2-0-clkreq {
|
||||
rockchip,pins = <4 RK_PA3 4 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_1_rst: pcie2-1-rst {
|
||||
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
|
@ -524,6 +596,16 @@ usbc0_int: usbc0-int {
|
|||
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
wlan {
|
||||
wifi_host_wake_irq: wifi-host-wake-irq {
|
||||
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
wifi_pwren: wifi-pwren {
|
||||
rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
|
|
|
|||
|
|
@ -162,6 +162,7 @@ pcie3x4: pcie@fe150000 {
|
|||
linux,pci-domain = <0>;
|
||||
max-link-speed = <3>;
|
||||
msi-map = <0x0000 &its1 0x0000 0x1000>;
|
||||
iommu-map = <0x0000 &mmu600_pcie 0x0000 0x1000>;
|
||||
num-lanes = <4>;
|
||||
phys = <&pcie30phy>;
|
||||
phy-names = "pcie-phy";
|
||||
|
|
@ -212,6 +213,7 @@ pcie3x4_ep: pcie-ep@fe150000 {
|
|||
interrupt-names = "sys", "pmc", "msg", "legacy", "err",
|
||||
"dma0", "dma1", "dma2", "dma3";
|
||||
max-link-speed = <3>;
|
||||
iommus = <&mmu600_pcie 0x0000>;
|
||||
num-lanes = <4>;
|
||||
phys = <&pcie30phy>;
|
||||
phy-names = "pcie-phy";
|
||||
|
|
@ -248,6 +250,7 @@ pcie3x2: pcie@fe160000 {
|
|||
linux,pci-domain = <1>;
|
||||
max-link-speed = <3>;
|
||||
msi-map = <0x1000 &its1 0x1000 0x1000>;
|
||||
iommu-map = <0x1000 &mmu600_pcie 0x1000 0x1000>;
|
||||
num-lanes = <2>;
|
||||
phys = <&pcie30phy>;
|
||||
phy-names = "pcie-phy";
|
||||
|
|
@ -297,6 +300,7 @@ pcie2x1l0: pcie@fe170000 {
|
|||
linux,pci-domain = <2>;
|
||||
max-link-speed = <2>;
|
||||
msi-map = <0x2000 &its0 0x2000 0x1000>;
|
||||
iommu-map = <0x2000 &mmu600_pcie 0x2000 0x1000>;
|
||||
num-lanes = <1>;
|
||||
phys = <&combphy1_ps PHY_TYPE_PCIE>;
|
||||
phy-names = "pcie-phy";
|
||||
|
|
|
|||
443
arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi
Normal file
443
arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi
Normal file
|
|
@ -0,0 +1,443 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "firefly,core-3588j", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: vdd_npu_mem_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
spi-max-frequency = <1000000>;
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "avcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "avdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "avdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* rk3588 preferred debug out */
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
702
arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts
Normal file
702
arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts
Normal file
|
|
@ -0,0 +1,702 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "dt-bindings/usb/pd.h"
|
||||
|
||||
#include "rk3588-firefly-core-3588j.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Firefly ITX-3588J";
|
||||
compatible = "firefly,itx-3588j", "firefly,core-3588j", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
/*
|
||||
* there are also a "Reset" and "Mask ROM" button, but the needed
|
||||
* settings are unknown at this time
|
||||
*/
|
||||
adc-keys-0 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-recovery {
|
||||
label = "Recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <2000>;
|
||||
};
|
||||
};
|
||||
|
||||
analog-sound {
|
||||
compatible = "simple-audio-card";
|
||||
pinctrl-0 = <&hp_detect>;
|
||||
pinctrl-names = "default";
|
||||
simple-audio-card,aux-devs = <&_headphones>, <&_speaker>;
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,hp-det-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
|
||||
simple-audio-card,mclk-fs = <384>;
|
||||
simple-audio-card,name = "rockchip_es8323";
|
||||
simple-audio-card,pin-switches = "Headphones", "Speaker";
|
||||
simple-audio-card,routing =
|
||||
"Speaker Amplifier INL", "LOUT2",
|
||||
"Speaker Amplifier INR", "ROUT2",
|
||||
"Speaker", "Speaker Amplifier OUTL",
|
||||
"Speaker", "Speaker Amplifier OUTR",
|
||||
"Headphones Amplifier INL", "LOUT1",
|
||||
"Headphones Amplifier INR", "ROUT1",
|
||||
"Headphones", "Headphones Amplifier OUTL",
|
||||
"Headphones", "Headphones Amplifier OUTR",
|
||||
"LINPUT1", "Microphone Jack",
|
||||
"RINPUT1", "Microphone Jack",
|
||||
"LINPUT2", "Onboard Microphone",
|
||||
"RINPUT2", "Onboard Microphone";
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Microphone Jack",
|
||||
"Microphone", "Onboard Microphone",
|
||||
"Headphone", "Headphones",
|
||||
"Speaker", "Speaker";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&es8323>;
|
||||
system-clock-frequency = <12288000>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* this does not seem to be a proper "amplifier" but is just
|
||||
* a way to control the GPIO pins to switch on or off the given
|
||||
* sound output device
|
||||
*/
|
||||
amp_headphones: headphones-audio-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&headphone_amplifier_en>;
|
||||
sound-name-prefix = "Headphones Amplifier";
|
||||
};
|
||||
|
||||
amp_speaker: speaker-audio-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
enable-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&speaker_amplifier_en>;
|
||||
sound-name-prefix = "Speaker Amplifier";
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
#cooling-cells = <2>;
|
||||
cooling-levels = <0 120 150 180 210 240 255>;
|
||||
fan-supply = <&vcc12v_dcin>;
|
||||
pwms = <&pwm15 0 50000 1>;
|
||||
};
|
||||
|
||||
hdmi0-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi0_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi0_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
/*
|
||||
* There is also a Power LED control @ RK_PB3 on
|
||||
* GPIO1 but for some reason it doesn't seem to work right
|
||||
*/
|
||||
|
||||
user_led: led-1 {
|
||||
gpios = <&pca9555 3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
};
|
||||
};
|
||||
|
||||
pcie30_avdd0v75: regulator-pcie30-avdd0v75 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "pcie30_avdd0v75";
|
||||
vin-supply = <&avdd_0v75_s0>;
|
||||
};
|
||||
|
||||
vbus5v0_typec_pwr_en: regulator-vbus5v0-typec-pwr-en {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&pca9555 12 GPIO_ACTIVE_HIGH>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-name = "vbus5v0_typec_pwr_en";
|
||||
};
|
||||
|
||||
vcc12v_dcin: regulator-vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-name = "vcc12v_dcin";
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_vcc3v3_en>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_host3: regulator-vcc5v0-host3 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&pca9555 7 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc5v0_host3";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_sys";
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: regulator-vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_usb";
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_fan_pwr_en: regulator-vcc-fan-pwr-en {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&pca9555 11 GPIO_ACTIVE_HIGH>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_fan_pwr_en";
|
||||
};
|
||||
|
||||
vcc_hub_reset: regulator-vcc-hub-reset {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&pca9555 4 GPIO_ACTIVE_HIGH>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_hub_reset";
|
||||
};
|
||||
|
||||
vcc_hub3_reset: regulator-vcc-hub3-reset {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&pca9555 6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-always-on;
|
||||
regulator-name = "vcc_hub3_reset";
|
||||
};
|
||||
|
||||
vcc_sata_pwr_en: regulator-vcc-sata-pwr-en {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&pca9555 10 GPIO_ACTIVE_HIGH>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_sata_pwr_en";
|
||||
};
|
||||
};
|
||||
|
||||
&avcc_1v8_s0 {
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
phy-mode = "rgmii-rxid";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus>;
|
||||
tx_delay = <0x45>;
|
||||
rx_delay = <0x4a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii-rxid";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1_miim
|
||||
&gmac1_tx_bus2
|
||||
&gmac1_rx_bus2
|
||||
&gmac1_rgmii_clk
|
||||
&gmac1_rgmii_bus>;
|
||||
tx_delay = <0x42>;
|
||||
rx_delay = <0x4f>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
sram-supply = <&vdd_gpu_mem_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0_in {
|
||||
hdmi0_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi0>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_out {
|
||||
hdmi0_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi0_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdptxphy_hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* in the Firefly BSP source this was confusingly called an
|
||||
* "ES8388" - it actually seems to be an ES8323 and the drivers
|
||||
* for that work best
|
||||
*/
|
||||
es8323: audio-codec@11 {
|
||||
compatible = "everest,es8323";
|
||||
reg = <0x11>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c6m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
pca9555: gpio@21 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
usbc0: usb-typec@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usbc0_int>;
|
||||
vbus-supply = <&vbus5v0_typec_pwr_en>;
|
||||
|
||||
usb_con: connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
data-role = "dual";
|
||||
op-sink-microwatt = <1000000>;
|
||||
power-role = "dual";
|
||||
sink-pdos =
|
||||
<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
||||
source-pdos =
|
||||
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
try-power-role = "source";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
usbc0_orien_sw: endpoint {
|
||||
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
usbc0_role_sw: endpoint {
|
||||
remote-endpoint = <&dwc3_0_role_switch>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
|
||||
dp_altmode_mux: endpoint {
|
||||
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_0_rst>;
|
||||
reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_rst>;
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
dp {
|
||||
dp1_hpd: dp1-hpd {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
sys_led_pin: sys-led-pin {
|
||||
rockchip,pins =
|
||||
<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie2 {
|
||||
pcie2_0_rst: pcie2-0-rst {
|
||||
rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie3 {
|
||||
pcie3_rst: pcie3-rst {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie3_vcc3v3_en: pcie3-vcc3v3-en {
|
||||
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
hp_detect: hp-detect {
|
||||
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
headphone_amplifier_en: headphone-amplifier-en {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
speaker_amplifier_en: speaker-amplifier-en {
|
||||
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usbc0_int: usbc0-int {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm15 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm15m2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* uart/232/485 */
|
||||
&uart0 {
|
||||
pinctrl-0 = <&uart0m2_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-0 = <&uart1m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* usb enable */
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
usb-role-switch;
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dwc3_0_role_switch: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&usbc0_role_sw>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host2_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
orientation-switch;
|
||||
sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usbdp_phy0_orientation_switch: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&usbc0_orien_sw>;
|
||||
};
|
||||
|
||||
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&dp_altmode_mux>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
rockchip,dp-lane-mux = <2 3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vcc_1v8_s0 {
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* for fan when deep sleep */
|
||||
&vdd_log_s0 {
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* display generator */
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi0_in_vp0>;
|
||||
};
|
||||
};
|
||||
802
arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts
Normal file
802
arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts
Normal file
|
|
@ -0,0 +1,802 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
model = "H96 Max V58 TV Box";
|
||||
compatible = "haochuangyi,h96-max-v58", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdhci;
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-function {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <1750>;
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
hdmi0-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi0_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi0_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_receiver_pin>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
|
||||
led {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: regulator-1v1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
pcie_3v3: regulator-3v3-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&pcie2_0_pow>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "pcie_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
wl_en_3v3: regulator-3v3-wlen {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&wl_en>;
|
||||
pinctrl-names = "default";
|
||||
/*
|
||||
* Needs to be brought up before the PCIe driver is probed,
|
||||
* otherwise detecting the WLAN module requires rescanning
|
||||
* the bus, and even then it fails half of the time during
|
||||
* firmware load
|
||||
*/
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "wl_en_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
pinctrl-names = "default";
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: regulator-5v0-otg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&vcc5v0_otg_en>;
|
||||
pinctrl-names = "default";
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0_in {
|
||||
hdmi0_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi0>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_out {
|
||||
hdmi0_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi0_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdptxphy_hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
pinctrl-0 = <&gmac1_miim
|
||||
&gmac1_tx_bus2
|
||||
&gmac1_rx_bus2
|
||||
&gmac1_rgmii_clk
|
||||
&gmac1_rgmii_bus>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@1 {
|
||||
/* RTL8211F */
|
||||
compatible = "ethernet-phy-id001c.c916";
|
||||
reg = <0x1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtl8211f_rst>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_0_rst>;
|
||||
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
pcie@0,0 {
|
||||
reg = <0x200000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
device_type = "pci";
|
||||
bus-range = <0x20 0x2f>;
|
||||
|
||||
wifi: wifi@0,0 {
|
||||
compatible = "pci14e4,449d";
|
||||
reg = <0x210000 0 0 0 0>;
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "lpo";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
ir_receiver_pin: ir-receiver-pin {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_pins: led-pins {
|
||||
rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie2 {
|
||||
pcie2_0_rst: pcie2-0-rst {
|
||||
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_0_pow: pcie2-0-pow {
|
||||
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
rtl8211f {
|
||||
rtl8211f_rst: rtl8211f-rst {
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_otg_en: vcc5v0-otg-en {
|
||||
rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifibt {
|
||||
wl_en: wl-en {
|
||||
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
wl_wake_host: wl-wake-host {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
bt_en: bt-en {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
bt_wake: bt-wake {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
bt_wake_host: bt-wake-host {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
spi-max-frequency = <1000000>;
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-name = "vdd_log_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-name = "pldo6_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
phy-supply = <&vcc5v0_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart9 {
|
||||
pinctrl-0 = <&uart9m0_xfer &uart9m0_ctsn &uart9m0_rtsn>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-0 = <&bt_en>, <&bt_wake_host>, <&bt_wake>;
|
||||
pinctrl-names = "default";
|
||||
shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi0_in_vp0>;
|
||||
};
|
||||
};
|
||||
151
arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
Normal file
151
arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
Normal file
|
|
@ -0,0 +1,151 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3588-orangepi-5.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi 5 Max";
|
||||
compatible = "xunlong,orangepi-5-max", "rockchip,rk3588";
|
||||
|
||||
vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
/* USB_OTG_PWREN */
|
||||
gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_otg_pwren>;
|
||||
regulator-name = "vcc5v0_usb30_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&headphone_amp {
|
||||
/* PHONE_CTL */
|
||||
enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&analog_sound {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_detect>;
|
||||
simple-audio-card,aux-devs = <&headphone_amp>;
|
||||
simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
simple-audio-card,routing =
|
||||
"Headphones", "LOUT1",
|
||||
"Headphones", "ROUT1",
|
||||
"LINPUT1", "Microphone Jack",
|
||||
"RINPUT1", "Microphone Jack",
|
||||
"LINPUT2", "Onboard Microphone",
|
||||
"RINPUT2", "Onboard Microphone";
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Microphone Jack",
|
||||
"Microphone", "Onboard Microphone",
|
||||
"Headphone", "Headphones";
|
||||
};
|
||||
|
||||
&fan {
|
||||
/* FAN_CTL_H */
|
||||
pwms = <&pwm9 0 50000 0>;
|
||||
};
|
||||
|
||||
&hym8563 {
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtc_int_l>;
|
||||
};
|
||||
|
||||
&led_blue_pwm {
|
||||
/* PWM_LED1 */
|
||||
pwms = <&pwm4 0 25000 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&led_green_pwm {
|
||||
/* PWM_LED2 */
|
||||
pwms = <&pwm5 0 25000 0>;
|
||||
};
|
||||
|
||||
/* phy2 */
|
||||
&pcie2x1l1 {
|
||||
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie_eth>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hym8563 {
|
||||
rtc_int_l: hym8563-int {
|
||||
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
hp_detect: hp-detect {
|
||||
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb_host_pwren: usb-host-pwren {
|
||||
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm4m0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm5m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm9 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm9m2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspim2_pins>;
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb30_otg>;
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb20>;
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
/* pcie eth. not a real regulator. 33VAUX */
|
||||
&vcc3v3_pcie_eth {
|
||||
/* Ethernet_power_en */
|
||||
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic,
|
||||
* both regulators share the same enable gpio
|
||||
*/
|
||||
&vcc5v0_usb20 {
|
||||
/* USB_HOST_PWREN */
|
||||
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_host_pwren>;
|
||||
};
|
||||
60
arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
Normal file
60
arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
Normal file
|
|
@ -0,0 +1,60 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3588-orangepi-5-compact.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi 5 Max";
|
||||
compatible = "xunlong,orangepi-5-max", "rockchip,rk3588";
|
||||
|
||||
hdmi0-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi0_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi0_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0_in {
|
||||
hdmi0_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi0>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_out {
|
||||
hdmi0_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi0_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdptxphy_hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
|
||||
usb {
|
||||
usb_otg_pwren: usb-otg-pwren {
|
||||
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi0_in_vp0>;
|
||||
};
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
805
arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
Normal file
805
arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
Normal file
|
|
@ -0,0 +1,805 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Ondřej Jirman <megi@xff.cz>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
adc-keys-0 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-maskrom {
|
||||
label = "Mask Rom";
|
||||
linux,code = <KEY_SETUP>;
|
||||
press-threshold-microvolt = <2000>;
|
||||
};
|
||||
};
|
||||
|
||||
recovery_button: adc-keys-1 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
status = "disabled";
|
||||
|
||||
button-recovery {
|
||||
label = "Recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <2000>;
|
||||
};
|
||||
};
|
||||
|
||||
speaker_amp: speaker-audio-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
sound-name-prefix = "Speaker Amp";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
headphone_amp: headphones-audio-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
sound-name-prefix = "Headphones Amp";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_blue_gpio: led {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 70 75 80 100>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
pwm-leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
led_blue_pwm: led-1 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
linux,default-trigger = "heartbeat";
|
||||
max-brightness = <255>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
led_green_pwm: led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <2>;
|
||||
max-brightness = <255>;
|
||||
};
|
||||
};
|
||||
|
||||
rfkill {
|
||||
compatible = "rfkill-gpio";
|
||||
label = "rfkill-pcie-wlan";
|
||||
radio-type = "wlan";
|
||||
shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
analog_sound: sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "Analog";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,bitclock-master = <&daicpu>;
|
||||
simple-audio-card,frame-master = <&daicpu>;
|
||||
/*TODO: SARADC_IN3 is used as MIC detection / key input */
|
||||
|
||||
daicpu: simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
system-clock-frequency = <12288000>;
|
||||
};
|
||||
|
||||
daicodec: simple-audio-card,codec {
|
||||
sound-dai = <&es8388>;
|
||||
system-clock-frequency = <12288000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie_eth";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <50000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_wf: regulator-vcc3v3-wf {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc3v3_wf";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <50000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_usb20: regulator-vcc5v0-usb20 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
regulator-name = "vcc5v0_usb20";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
/* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
|
||||
es8388: audio-codec@11 {
|
||||
compatible = "everest,es8388";
|
||||
reg = <0x11>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
AVDD-supply = <&vcc_3v3_s0>;
|
||||
DVDD-supply = <&vcc_1v8_s0>;
|
||||
HPVDD-supply = <&vcc_3v3_s0>;
|
||||
PVDD-supply = <&vcc_1v8_s0>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2_2ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s2m0_lrck
|
||||
&i2s2m0_sclk
|
||||
&i2s2m0_sdi
|
||||
&i2s2m0_sdo>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&package_thermal {
|
||||
polling-delay = <1000>;
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&package_fan0>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map1 {
|
||||
trip = <&package_fan1>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
|
||||
trips {
|
||||
package_fan0: package-fan0 {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
package_fan1: package-fan1 {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
status = "okay";
|
||||
|
||||
spi_flash: flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <100000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
spi-max-frequency = <1000000>;
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vdd2_ddr_s3>;
|
||||
vcc14-supply = <&vdd2_ddr_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: dcdc-reg1 {
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: dcdc-reg2 {
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-name = "vdd_log_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <825000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: dcdc-reg4 {
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <825000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* shorted to avcc_1v8_s0 on the board */
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-name = "pldo6_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
/*
|
||||
* The schematic mentions that actual setting
|
||||
* should be 0.8375V. RK3588 datasheet specifies
|
||||
* maximum as 0.825V. So we set datasheet max
|
||||
* here.
|
||||
*/
|
||||
regulator-min-microvolt = <825000>;
|
||||
regulator-max-microvolt = <825000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
phy-supply = <&vcc5v0_usb20>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_usb20>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -774,6 +774,15 @@ &tsadc {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb_otg0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -796,6 +805,15 @@ &usb_host0_ohci {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user