Benchmarks execute as a BullMQ job in the queue worker, but
/api/benchmark/status and the 409 double-run guards read the web
process's in-memory BenchmarkService, which never sees the run. Status
always read idle, and a second POST /api/benchmark/run was accepted
mid-flight and queued behind the first.
Status now comes from the queue, the one place both processes can see.
The worker publishes each stage on its job via job.updateProgress(),
and resolveBenchmarkStatus() reports the active job's stage, "starting"
for a job still queued, or the local status for a sync=true run. The
status endpoint and all three run guards read it. If the queue can't be
read they fall back to the local status, as before.
Closes#1326
The post-rerank relevance floor rejects noise but passes coherent
off-topic questions, and it gets worse as the library grows. Adding
Gutenberg prose, the Python tutorial and MDN pages to the eval corpus
took the off-topic leak rate from 22% to 67% at the 0.62 floor.
Score cutoff does not fix it. The weakest correct top hit scores 0.666
while "write me a haiku about autumn leaves" pulls Walden at 0.705.
A cosine floor and a top-vs-median contrast test both cost recall
faster than they cut leaks.
- Add rag.relevanceCheck (default off). After the floor, the tasks
model, or the chat model when none is set, gives one grammar-constrained
on_topic verdict for the whole retrieved set. Off topic means no
context and no citations. Any failure keeps the chunks unjudged.
- Add a Settings > Models toggle recommending an 8B+ tasks model.
On llama3:8b the check cuts off-topic leaks from 67% to 6% for about
5 points of core recall@5 and ~0.6s per turn. On 3B models it rejects
most valid questions, which is why it is opt-in.
- Add 6 distractor documents and an off_topic suite (18 unanswerable
questions, 7 distractor controls) to the eval corpus.
- Report per-tag leak rates and leaked cases with top scores in
eval:retrieval. Add --judge-model to measure the check and --dump to
export pre-floor candidate pools for offline gate simulation.
- Pin the check off in eval:generation so a local setting cannot move
scores.
- Record the distractor sweep on RAG_MIN_FINAL_SCORE. The 0.62 default
stays: 0.65 halves leaks at no measured recall cost but leaves only
0.016 of margin.
The corpus fingerprint changes to b4ebe5dce8699f5d. Retrieval reports
from before this commit are not comparable, and a new baseline is
committed.
Refs #1341
planPrompt() returned the response reserve as num_predict, and the
reserve was clamped by MAX_RESPONSE_RESERVE = 1024. Chat answers
stopped at 1024 output tokens regardless of window size, often
mid-sentence, and the normalized stream chunks dropped Ollama's
done_reason, so neither the UI nor API clients could discern between
a cut-off answer and a finished one.
- Decouple the generation cap from the reserve. num_predict is now the
space left in the window after the prompt, less a 5% (min 64 token)
margin for estimator error, with the reserve as its floor. Raise
MAX_RESPONSE_RESERVE to 8192 so it only bounds prompt hold-back.
- Carry done_reason through all four OllamaService chat paths. Native
forwards Ollama's done_reason; compat maps OpenAI's finish_reason.
- Log length-limited stops in OllamaController with num_predict,
num_ctx and tokens generated.
- Show a truncation notice on cut-off answers, with a Continue button
on the latest one that sends a normal follow-up turn.
Generation evals before and after this change are not length
comparable.
Closes#1342
Chat sent num_ctx, num_predict and nothing else, so every turn decoded at
whatever the backend picked: temperature 0.8, top_p 0.9, no min_p. On a
heavily quantized 1-3B model that is the wandering, repetitive output people
read as "the local model is bad".
Adds `ai.responseStyle` with four profiles. min_p is the lever, not
temperature: it floors relative to the top token, so it truncates hard on a
confident distribution and barely at all on a flat one, which is where small
models start to wander. top_p stays at 1.0 rather than stacked on top of it.
repeat_penalty moves with the style, because a grounded answer legitimately
repeats a part number inside the 64-token window: `focused` relaxes it to
1.05, `creative` tightens it to 1.15.
`auto` is the only style that defers to the model. Plenty of library models
ship author-tuned samplers (qwen3 sets 0.6/0.95/20), so those win key by key
and NOMAD fills only the gap, which in practice is min_p. A style the user
picked by name overrides them, or it would silently do nothing on half
their models.
The compat transport drops min_p, so a profile carries a separate compatTopP.
Passing top_p 1.0 to a backend with no min_p behind it would sample the raw
distribution, which is worse than the 0.9 it replaced.
Resolved in the controller, so the grammar-constrained task calls keep their
temperature 0. An explicit temperature still outranks a profile's, which is
what keeps the eval harness deterministic.
`eval:generation --style` is new and load-bearing: temperature 0 makes min_p,
top_p and top_k inert, so a default run cannot see this change at all.
`--style=off` sends no samplers and no temperature, and is the control.
Verified against Ollama 0.32.9, min_p accepted. 22 unit tests.
Content Explorer hardcoded `lang: 'eng'`, so it could only ever show
about 1,300 of the catalog's ~10,900 books. Adds a language selector
sourced live from the catalog's own language feed, with book counts,
defaulting to English and remembered per browser.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F8Mgg1vd2eKSs8StZiuyMV
* feat(kb): add per-file active/inactive toggle for search inclusion
Implements the per-file toggle agreed on in #1119, in place of disabling
ZIM auto-discovery by default. Any indexed file (ZIM, upload, or other)
can now be excluded from RAG search results instantly, without deleting
or re-embedding its vectors.
- Vectors stay in Qdrant permanently; each point's payload carries an
active boolean. Toggling flips this payload in place, both directions,
with no re-embedding cost.
- Search filter is a denylist (must_not: active == false), not an
allowlist, so a point missing the field entirely is still found by
default -- search correctness never depends on backfill timing.
- embedAndStoreText() looks up a file's existing active state before
writing new points, so retries, force re-embeds, and replaced-content
reindexing never silently reactivate a file the user explicitly
toggled off.
- Applies uniformly to all non-admin_docs buckets (ZIM, uploads, other),
matching how the rest of this pipeline already treats buckets, rather
than special-casing ZIM.
New POST /api/rag/files/active endpoint and KB panel toggle switch,
following the existing updateFileCollection pattern.
Real vector deletion for genuinely deleted/replaced files remains
#1170's separate concern.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* feat(kb): group personal KB uploads by collection with bulk toggle
Groups personal KB uploads into collapsible per-collection header
rows (with an "Uncategorized" bucket for files with no collection) to
reduce clutter in the file table. Each collection header also exposes
a bulk active/inactive toggle to flip every file in that collection at
once.
Also fixes three pre-existing bugs found in the collection-assignment
dropdown while building this: the popover was clipped by table cell
truncation, clipped again by the table wrapper's overflow, and the
combobox query was stale-filtering results on open.
Refs #1193
* fix(kb): widen the modal for the Active column and coerce active to a boolean
Both found by browser-verifying on NOMAD3.
The Active column adds ~57px, which put the table back over the modal width and
reintroduced the exact defect #1198 fixed: the Delete button falls off the right
edge at every viewport. Measured on the box at 1018px of table against 961px of
usable width at max-w-5xl. Widened to 6xl.
MySQL returns tinyint(1) as 0/1 rather than a boolean, and the raw 1 reached the
DOM as aria-checked="1". That is not a valid ARIA value, so a screen reader is
told nothing useful about whether the toggle is on. Coerced in the service so
every consumer sees a real boolean, with a !! guard in Switch as well.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F8Mgg1vd2eKSs8StZiuyMV
* fix(kb): validate the bulk collection toggle's input before sanitising
sanitizeCollectionName ran before the type check, so a form-encoded request
sending collection[] as an array reached .trim() on a non-string and produced
an uncaught TypeError, surfacing as a 500. The vision controller already
guards this the same way.
Also documents why requiring `active` to be a real boolean is load-bearing
rather than mere input hygiene: a cross-site HTML form can only send the string
"true", so that check is what keeps a bulk Qdrant write across every point in
the index out of reach of a form POST from another origin. Worth a comment,
because coercing it would look like a harmless usability fix.
Found in a security review of the release PRs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F8Mgg1vd2eKSs8StZiuyMV
---------
Co-authored-by: John Cortright <jcortright@zscaler.com>
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
"Address" was vague for a field that takes a URL. "No scheme? We'll default
to http://" named a concept most people do not have a word for, and it was not
needed: the live preview already shows http:// appearing the moment someone
types a bare address, which demonstrates the behaviour rather than describing
it. The preview stays, the sentence goes.
The two link tile validation messages follow the same wording. The custom URL
override message is left alone; it belongs to a different feature.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F8Mgg1vd2eKSs8StZiuyMV
A link tile rendered on a flat surface colour, which read as a stark white card
against the filled green app tiles. Tiles now take one of six colours from the
brand palette, chosen when creating or editing one, and the card is tinted from
it.
Tiles stay visually distinct from managed apps regardless of colour: the dashed
border and the external-link marker carry that, not the hue, and the tint is
deliberately light so the distinction survives every option.
Class names are written out in full rather than interpolated, because Tailwind
scans source text for literal class strings and would silently drop a computed
one, leaving the tile untinted. A test asserts that.
Added as a separate migration from the one introducing is_link_tile, since that
has already run on the test box and editing it in place would leave fresh and
upgraded installs with different schemas.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F8Mgg1vd2eKSs8StZiuyMV
Users want things they already run to appear on the dashboard: a NAS, a router
UI, a printer, a Pi, a container they started themselves. Adds a tile they
address themselves, with a name, one URL field, an optional description and an
icon from the curated set.
Chosen over adopting containers from the Docker daemon, which is what community
PR #1239 proposed. Adoption only reaches containers on this Docker host and has
to guess: it took the lowest published host port and assumed http, which picks
the wrong port for anything publishing several (Portainer 8000 against 9443,
Jellyfin 8096 against 8920) and breaks entirely for HTTPS. A tile the user
addresses has no guessing in it, covers the whole LAN rather than one Docker
host, and has no lifecycle that can break.
One URL field rather than separate host, port and path, because people paste
URLs and it gets https and sub-paths for free. A bare "192.168.1.50:8080" gains
http automatically, which is what most LAN devices need. normalizeCustomUrl and
getServiceLink already did exactly this work for the custom app URL override, so
both are reused rather than duplicated.
Stored as a service row with no container behind it: is_link_tile marks it,
custom_url carries the destination, and the service_name is namespaced
nomad_link_* so it can never collide with a curated entry. The seeder only
iterates its own DEFAULT_SERVICES and never prunes unknown rows, so a reseed
cannot touch or remove a tile.
The tile is deliberately styled differently from a managed app, outlined and
dashed with an external-link marker rather than filled, because if it looked the
same users would expect Start, Stop and Update and file bugs when those controls
are not there. Removing a tile arms a confirm first, since it is user-entered
data with no undo.
Icons come from a fixed 36 shared by the picker and the server-side validator,
so the two cannot disagree about what is selectable. DynamicIcon renders nothing
at all for a name it does not know, which would leave a silent hole in a tile.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F8Mgg1vd2eKSs8StZiuyMV
The UI enforces 500 characters but the validator did not, so the API accepted
up to the MySQL TEXT ceiling. The API needs no authentication by design, so an
uncapped free-text column reachable from any page a user visits is a cheap way
to bloat the database. Matches the limit the form already shows.
Found in a security review of the release PRs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F8Mgg1vd2eKSs8StZiuyMV
Salvages @kennethbrewer3's work from #836, which had drifted onto a stale base
(GitHub showed 231 files; the real change is the map UI plus a migration).
Marker visibility (individually and Hide All), per-marker icon and custom hex
colour with contrast-adjusted icon colour, search, sorting and a tree view over
the marker list, coordinate search and fly-to with URL parameters
(?lat=&lng=&zoom=), creating a marker from typed coordinates, and markers
rendered as SVGs anchored to true coordinates rather than approximately.
Name, notes and preset colour already existed; the new columns are
custom_color, icon, icon_color and visible.
Dropped from the original as stale-base noise rather than his work: unrelated
duplicate changes to the Ollama, Docker, download, RAG and ZIM services, the
API reference and getting-started docs, README/FAQ/CONTRIBUTING, the installer
script, and a revert of AppLayout to a version predating the compact sidebar.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F8Mgg1vd2eKSs8StZiuyMV
Closes#1176. Salvages @gabegraves's work from #1178, rebased onto the
RagPipelineService refactor that landed after it was written.
Adds JPEG/PNG/WebP attachments to chat over multipart, leaving text-only JSON
requests on their existing path. Images are normalized server-side to bounded
JPEG with metadata stripped, capped on count/size/pixels/output, and the
temporary uploads are cleaned up on every validation path. They are attached
only to the latest user message, are excluded from RAG, titles, logs and
persisted history, and are never written to storage.
Vision support is resolved per model from what the backend actually reports --
OpenAI-compatible /v1/models metadata, then Ollama /api/show, then llama.cpp
/props -- never inferred from a model name. A model that reports no vision
support has attachments disabled with a visible explanation; a backend that
reports nothing is allowed with a warning and its rejection is translated into
plain compatibility guidance rather than a raw error.
Changes from the original:
- Prompt assembly moved into RagPipelineService in the meantime, so the
controller half is rebuilt against the trace and the multipart-aware
collection filter is now the only one (dev's request.input() version would
have silently dropped the collection on every image request).
- Added a native-path converter. dev split chat into native and OpenAI-compat
paths after this was written; Ollama's native /api/chat does not take OpenAI
content parts, it takes a sibling `images` array of bare base64. Without this
every image request on a native Ollama backend would fail.
- Dropped the model-recommendation change (selectRecommendedModels and the
Qwen3-VL fallback entry). Displacing a recommended model at first-time setup
is a product decision and is being taken separately. The "Supports images"
label in Easy Setup is kept: it describes what is already on offer rather
than changing it.
- Dropped the DEFAULT_QUERY_REWRITE_MODEL download prompt his branch carried,
which dev deleted in d022c2d.
- Removed a duplicate checkModelHasThinking; kept dev's memoized getModelInfo
path, since thinking detection is not part of this feature.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F8Mgg1vd2eKSs8StZiuyMV
Closes#1179.
Surfaces the documents an answer was drawn from as a "Sources" list under the
assistant message, with the archive date where one is known, and persists it so
reopening a past conversation still shows what backed each answer.
Offline there is no second opinion to check an answer against, so provenance is
the only signal the user has that a claim came from a real document rather than
from the model. This is the other half of retrieval being allowed to decline:
one says when nothing relevant was found, this says what was found.
Citations are built from the chunks actually injected into the prompt, not from
everything retrieval returned. A chunk dropped by the budget planner never
reached the model, so citing it would credit the answer to a document it was
not based on -- the exact failure the list exists to prevent.
The archive title and date have been written into the vector payload by the ZIM
ingestion path all along and were simply never read back, so this works on
already-embedded content with no re-embed.
Rebased onto the RagPipelineService refactor, which landed after this was
written: the citation list now comes off the pipeline trace rather than the
inline retrieval block that used to live in the controller. Entries with
neither a path nor a title are skipped rather than shown as "Unknown source" --
a row the user cannot act on makes an answer look sourced when it is not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F8Mgg1vd2eKSs8StZiuyMV
There was one cutoff, Qdrant's score_threshold at 0.3, and nomic scores
unrelated text well above it, so every question retrieved *something*
(nonEmptyRateOnRefusal 1.0) and rag_context wasted four lines asking a 3B
model to "silently judge" relevance. That is a classification a number
should decide, not a micro model.
Adds `RAG_MIN_FINAL_SCORE`, a floor on the post-rerank score, applied before
source diversity. The floor judges relevance, the 0.85^n penalty judges
redundancy. Nothing clears it and nothing is injected. `score_threshold` stays
at 0.3 as the candidate net. Exposed as `rag.minRelevance` with a module-
scoped TTL cache invalidated from `updateSetting`.
The floor is calibrated and the harness was describing the wrong number:
aggregate() bucketed semanticScore, so its percentiles measured raw cosine
while the new knob filters the reranked score. Both axes now, and the gap
matters: recall falls at 0.60 on the semantic axis, 0.66 on the final one.
floor recall@5 precision@5 emptyOnAnswerable nonEmptyOnRefusal
0.00 0.991 0.221 0% 100%
0.62 0.991 0.524 0% 60%
0.66 0.991 0.695 0% 60%
0.67 0.972 0.704 1% 60%
Default 0.62, not the last-lossless 0.66: the refusal win is complete at
0.62 and 28 documents is a thin basis for spending margin. 0.60 is the
honest floor. Three of five refusal goldens are near-corpus by
construction, where declining is the generation tier's job.
Both eval tiers pin the floor to the constant and ignore the setting, for
the same reason the harness never sets skipRetrieval.
4 metrics improved against baseline, no regressions.
Chat was run through Ollama's OpenAI-compatible /v1 endpoint, which has no
context-size field, so the num_ctx we sent was silently discarded and the
entire NUM_CTX_LADDER was dead code. Every conversation ran at the backend
default and was truncated from the middle (where history and
retrieved context actually sit). Measured with identical ~7k-token prompts:
2,060 tokens processed against 7,049 on the native endpoint, and with the
needed fact in the discarded middle the old path hallucinated a plausible
wrong number.
Transport: add a native /api/chat path using the already-installed ollama
package, sending a real options object (num_ctx, num_predict, temperature,
seed) plus keep_alive. The OpenAI path is still used for LM Studio and llama.cpp,
minus the ineffective num_ctx and with include_usage so both paths return
prompt token counts. /api/show is now read for trained context, parameter
size, quantization and any modelfile num_ctx. The <think> stream normalizer
moves to app/utils/think_stream.ts so both transports share it; it gains a
flush() that fixes a dangling partial tag being dropped at end of stream.
Token accounting: replace chars/N with a structural segmenter scaled by a
per-model factor learned by EWMA from the prompt_eval_count every response
already returned and threw away. End-to-end estimator error is 4.6% against
18-20% for a fixed divisor — qwen2.5 converges to k=1.26 where llama3 sits
at 1.00, so no single global constant serves both.
Context window: resolved once per model from trained context, the exact KV
cost derived from GGUF metadata (head_count_kv, not head_count — GQA makes
them differ 4x), and available VRAM, then memoized. Memoization is
load-bearing: asking for a different num_ctx makes Ollama unload and reload
the model, stalling the turn and discarding the KV cache. The floor never
overrides the model's trained ceiling — tinyllama trains to 2048, and a
blind 4096 floor pushes RoPE past anything the weights saw.
Prompt budget: planPrompt allocates explicitly instead of delegating
overflow to silent backend truncation — response reserve, then fixed blocks
(system and current query, never dropped), then RAG chunks whole and
best-first, then history in whole user+assistant turns, evicted newest-first
in blocks with an elision marker. Block eviction keeps the prefix stable for
several turns rather than shifting on every one.
KV-cache ordering: the per-turn retrieved block moves behind history to the
tail, so the stable prefix stays byte-identical turn to turn. At turn 14 of
a long conversation, prefill is 231ms at the tail against 539ms at the front
(~1ms/turn growth against ~25ms). The win is conditional — with a large
retrieved block and short history the two measure the same — so both
orderings ship behind RAG_PLACEMENT. The per-turn query rewrite also moves
to the tasks model; on a single-slot Ollama it was evicting the chat model's
cached prefix on every single turn.
Also: OLLAMA_CONTEXT_LENGTH and OLLAMA_KV_CACHE_TYPE=q8_0 on the container
(q8_0 is treated as headroom, never as a budgeting assumption, since
unsupported architectures fall back to f16 silently), a Context Window
setting in Settings > Models, and budget fields on PipelineTrace.
Eval: golden suites (--suite) so the new long_context goldens cannot move
the aggregates the committed baselines were recorded against, plus budget
and estimator-error metrics through the report path. Retrieval is unchanged
and eval:compare reports no metric outside the tolerance band; the
long_context suite scores correctness 1.000 with historyElided 0.500 (the
two eviction cases, by design). Unit tests 337 -> 386 passing, same 7
pre-existing failures.
Ingest-side CHAR_TO_TOKEN_RATIO is deliberately untouched: changing it
re-chunks the corpus and invalidates retrieval baselines, which belongs in
its own measured change.
Allows users to optionally specify a model to use for ancillary tasks (chat suggestions, chat titles, etc.) instead of strictly using the last used model. This means aesthetic/non-critical work can be passed to a small, lightweight model instead of a heavy reasoning model used for chats.
If a model is not selected in the AI Assistant settings (`/settings/models`), the existing behavior of using the last used model is retained.
The submit flow discarded the real failure reason and always returned the
generic "Failed to submit benchmark results." to the UI. The most common
cause is the leaderboard's one-per-hour rate limit (HTTP 429), which left
users with no idea why their submission failed or that retrying shortly
would also fail.
- benchmark_controller: return a clear, actionable message. Name the rate
limit explicitly on 429; otherwise pass through the underlying detail
(repository error or a service validation message like "already
submitted"), falling back to the generic only when we have nothing.
- benchmark_service: attach the raw upstream `detail` to the thrown error so
the controller can surface it.
The frontend already renders the server `error` string, so no client change
is needed.
* feat(drug-reference): offline FDA drug labels, conditions, and remedies
Adds an offline medical-reference feature with three coupled layers:
- Drug Reference: full-text search over openFDA drug-label indications,
a detail page per label, and a side-by-side single-drug comparison view.
A two-phase background pipeline downloads the openFDA label parts to the
storage volume (resumable) and ingests them into the search table.
- Conditions ("When to use what"): a curated spine of first-aid situations
that maps each situation to matching OTC drugs, each linking back to its
Drug Reference detail page.
- Curated remedies: hand-authored natural and home-remedy entries drawn from
US-government public-domain sources (NCCIH, CDC, MedlinePlus, FDA), shown
with their source links and the same safety disclaimers as the rest of the
feature.
The drug-reference and conditions layers are intentionally coupled: the drug
detail page shows the situations a drug treats, and the conditions controller
reads the same drug_labels table.
Safety surfaces ship as written. The amber SafetyBanner ("informational only,
not medical advice, not an FDA endorsement, not a drug-interaction checker, in
an emergency call emergency services") renders on the condition pages and the
search page; the detail and comparison pages carry their own "not a cross-drug
interaction checker" callout; and every page carries the openFDA CC0 source
citation and no-FDA-affiliation footer.
Wiring on this branch:
- start/routes.ts: the /drug-reference and /conditions page GETs plus their
/api/* groups.
- commands/queue/work.ts: the drug-download and drug-ingest queues, both at
concurrency 1. The two drug queues get a per-queue stall override
(lockDuration 1_800_000, maxStalledCount 3) because each part is one long
stream; every other queue keeps the existing 300000 default.
- inertia/pages/home.tsx: Drug Reference and "When to use what" tiles. The
icon and display_order are a starting point, open to change.
- types/kv_store.ts: the two drugReference.* keys the pipeline reads and writes.
- package.json: yauzl and stream-json (plus their @types), used by the ingest
job to stream the label JSON out of the downloaded zips.
The app reads the conditions and remedy data from the compiled TS constants in
app/data/; the repo-root collections/*.json files are the browseable mirrors.
The natural-remedies standalone test reads collections/natural_remedies.json to
assert the two stay in sync, so that file is also a test fixture.
The four standalone tests pass (drug_interactions, drug_ingest_status,
conditions, natural_remedies). tsc reports no errors in the feature code.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* chore(drug-reference): drop a fork-internal comment reference
* fix(drug-reference): address review — defer FULLTEXT, fallback remedies prop, strip fork refs
- migration: wrap the FULLTEXT ALTER in this.defer so it runs after the
deferred createTable (was silently swallowed, index never created)
- controller: add remedies:[] to the index() error fallback (required prop)
- strip fork-internal issue/spec references from ported comments
- tsconfig: exclude tests/standalone (node --experimental-strip-types only)
- correct the varchar(768) byte-math comment; extend remedy-spine test
* fix(drug-reference): make the interaction comparison readable at five drugs
The comparison view laid its columns out on an equal-fraction CSS grid
(repeat(N, minmax(0, 1fr))), so each added drug shrank every column; at the
five-drug maximum the FDA interaction text was squeezed into unreadable slivers.
Lay the columns out with flex instead: full-width and stacked on phones, then
fixed-width columns that scroll sideways from the sm: breakpoint up, so they
never shrink below a readable width. Theme the columns with the same palette as
the rest of the page (they were on stock gray), and give the headers a fixed
min-height so columns line up when drug names wrap.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(collections): route a 'dataset' tier resource to the drug pipeline
Add an optional `type` discriminator to SpecResource ('zim' | 'dataset',
absent == 'zim'), so the tier installer can carry a DB-ingested resource
alongside ZIM files. ZimService.downloadCategoryTier branches on it: a
'dataset' resource dispatches the existing FDA download+ingest pipeline
instead of RunDownloadJob, guarded against duplicate dispatch by the drug
ingest status. Every existing manifest entry has no `type` and keeps the
exact ZIM path.
Widen InstalledResource.resource_type to include 'dataset' and exclude
dataset rows from the ZIM/map catalog-update scan (datasets aren't
filename-versioned; their freshness path is separate). No dataset rows are
written yet: the InstalledResource 'dataset' row on ingest-ready, the
manifest entry, install-gating, and the downloads-aggregator integration
are follow-up commits.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(drug-reference): rework into an opt-in medicine-standard tier dataset
Reshapes the offline FDA drug reference from a built-in feature into curated
content installed by selecting the Medicine / Standard tier, per maintainer
direction.
- install-state: the ingest writes an installed_resources 'dataset' row on
ready (version = the openFDA export_date), threaded installer to download to
ingest; the tier-status math and the home-tile gate read it. Manual ingests
write no row, so install-state stays tied to the curated path.
- manifest: declare the dataset in the medicine-standard tier (runtime fetches
the remote manifest, so this also needs to land upstream).
- install-gating: the drug-reference home tiles render only when installed.
- uninstall: DrugReferenceService.uninstall() stops the two drug queues, deletes
the on-disk parts, truncates drug_labels (schema kept), clears the KV markers,
and drops the install row. Best-effort, logged, scoped to drug data only.
- downloads: the download phase reports the canonical {percent, downloadedBytes,
totalBytes} shape as one drug-data card in the Active Downloads aggregator with
cancel/remove; the heavy ingest stays in the IngestStatus surface with an
Indexing handoff on the card.
- auto-update: a daily DrugAutoUpdateJob compares the manifest export_date and
re-downloads when newer, gated on installed + no active job.
typecheck clean; the drug standalone suites pass. Three points are flagged in
code for the maintainer: the InstalledResource 'dataset' approach, the tier
home, and the export_date string format.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(downloads): keep the drug download card live across all parts
The Active Downloads card filtered to the deterministic jobId, but the
download's continuations run under auto-generated jobIds (only part 0 uses the
deterministic one). So the card tracked part 0 and then vanished while parts
2..N kept downloading. The queue is concurrency 1, so collapse to whichever
single part is in flight and report the deterministic jobId: one card tracks
aggregate progress through the whole download and cancel/remove still routes.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(drug-reference): co-locate a persistent safety note with affirmative remedy guidance
Add RemedySafetyNote at the head of every natural-remedy section — the two on
Drug Reference and the one on "When to use what" — so the "informational only,
not medical advice, seek real medical care in an emergency" framing appears with
the guidance itself, not only in the page-top banner. Replaces the terse
per-section caveat with the same amber alert language as SafetyBanner.
Addresses the upstream #1040 review request that the disclaimer be unmistakable
and present wherever affirmative self-care guidance appears, not a one-time banner.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(drug-reference): fold dataset freshness into the content-auto-update path
The drug dataset auto-updated on its own daily cron that ignored the
contentAutoUpdate.* master switch, so it would refresh even with content
auto-update turned off, and it didn't ride the content-update path the way
ZIMs and maps do.
Move the export_date freshness/apply orchestration onto
DrugReferenceService.attemptAutoUpdate(), add
ContentAutoUpdateService.attemptDrugDataset() gated on the same enabled +
window config, and have the hourly ContentAutoUpdateJob drive both. Retire
the standalone DrugAutoUpdateJob. The ZIM/map attempt() path is unchanged.
Addresses the upstream #1040 request to wire the openFDA export_date check
into the content updater so the dataset updates alongside ZIMs and maps.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(drug-reference): strengthen the remedy note to consult a clinician before combining with meds
Widen the affirmative-remedy safety note from "talk to a clinician before use"
to explicitly cover using a remedy AND combining one with a medication the user
already takes — the interaction case is the higher-risk path for an off-grid
user self-treating.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(drug-reference): gate affirmative remedy content behind an off-by-default flag
Add drugReference.remediesEnabled (default off), independent of the tier
install. When off, the server emits no remedy data at any boundary — the
drug-reference page prop, conditions show, and the /api/conditions/drugs
situation search — and the "Natural" filter is hidden, so installing the
medicine-standard tier lights up the verbatim FDA label search and the
condition-to-OTC matching but not the hand-authored self-care and herbal
sections. No user-facing toggle: it is flipped on after a clinician content-pass.
Implements the upstream #1040 split-by-risk request: the regulated label content
ships with the tier; the authored remedy guidance stays gated until sign-off.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Co-authored-by: Jake Turner <52841588+jakeaturner@users.noreply.github.com>
Shows a dismissible dashboard banner to users who submitted a benchmark under
v1 scoring but don't yet have a Score v2 result, nudging them to re-run so the
community leaderboard gets their v2 number.
- Show logic (benchmark_service.shouldShowRerunBanner): has a result with
submitted_to_repository=true AND no result with nomad_score_v2 AND the
dismiss KV isn't set. Self-clears two ways — dismiss sets the KV, and any v2
run gives a result a nomad_score_v2 so the condition flips off on its own.
- New GET /api/benchmark/rerun-banner + useBenchmarkRerunBanner hook (mirrors
useUpdateAvailable), rendered as a dismissible Alert on the dashboard with a
"Re-run benchmark" CTA to /settings/benchmark.
- New KV key benchmark.rerunBannerDismissed (boolean) in both KV_STORE_SCHEMA
and the SETTINGS_KEYS whitelist (the PATCH /system/settings validator enum);
dismiss writes it via the existing updateSetting endpoint + invalidates the
query.
Sibling to the Score v2 app client (#1094); stacked on it for the
nomad_score_v2 column. Browser-verified on the NOMAD3 dev env: show/dismiss/
reload-persist/self-clear-on-v2 all correct.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
An install that never went online while visiting /maps never provisions
world.pmtiles (it is lazily extracted from the internet), leaving the map
blank/grey offline outside any downloaded regional extracts.
Detect the world basemap's presence on disk and surface it to the UI so:
- /maps shows a clear notice explaining the base map isn't downloaded and
how to fix it, instead of a silent grey screen.
- /settings/maps offers an explicit "Download Base Map" action (~15 MB) to
provision it deliberately while online.
Adds MapService.checkWorldBasemapExists() / provisionWorldBasemap(), a
POST /maps/setup-world-basemap endpoint, and threads worldBasemapExists
through the maps page props.
Refs #1030
Co-authored-by: Cursor <cursoragent@cursor.com>
* feat(AI): per-model thinking toggle with global default (off)
Stop forcing thinking on for every capable model. Adds a global default
(ai.autoThinking, ships OFF) and a per-model override in the chat window,
shown only for thinking-capable models and remembered client-side.
The /v1 (OpenAI-compat) endpoint ignores `think`; reasoning_effort is the
real lever. The controller resolves per-request preference -> global default
-> OFF (gated on capability), and the service maps that to reasoning_effort
('none' to suppress on a capable model, 'medium' for gpt-oss, unset to let a
capable model default thinking on). A new thinkingCapable flag keeps
non-Ollama backends from ever receiving reasoning_effort.
installed-models is enriched with a `thinking` flag (checkModelHasThinking,
now memoized) so the picker knows which models get the toggle.
Stacks on #1078 (reasoning-field read + client-disconnect abort).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(AI): thinking toggle as NOMAD Switch + info tooltip
Address review feedback on the per-model thinking control:
- Use the shared Switch component (matches AI Assistant settings) instead
of a raw checkbox.
- Label "Thinking:" with a colon to match the adjacent "Model:" label.
- Add an InfoTooltip explaining what thinking does and where the default
lives. Extend InfoTooltip with optional `position` ('top'|'bottom') and
`align` ('center'|'right') so it opens downward and expands leftward from
the right-edge header slot instead of being clipped/crushed against the
viewport edge. Defaults preserve existing (benchmark page) behavior.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(creator-packs): backend rail for gated creator content packs
Phase 1 of Creator Packs: the app-side download rail for per-creator
video ZIMs served from the private R2 bucket behind the entitlement
Worker. No UI yet (Phase 2).
- Thread optional requestHeaders through the download util + job so the
ZIM fetch can carry `Authorization: Bearer <APP_KEY>` on both the HEAD
probe and the GET stream (Worker streams the ZIM directly, gated).
- Add resourceMetadata.skip_embedding and gate the RAG/EmbedFileJob
branch on it so video ZIMs are never sent to the knowledge base.
- New creator_packs ManifestType + creatorPacksSpecSchema (display
metadata only, no url) + CollectionManifestService wiring and
getCreatorPacksWithStatus() status join.
- collections/creator-packs.json catalog with the two seed packs.
- CreatorPackService.installPack: ensure Kiwix (auto-install if absent),
resolve the stable Worker URL, dispatch the gated download with
skip_embedding. Typed result codes.
- CreatorPacksController + GET/POST /api/creator-packs routes.
- CREATOR_PACKS_APP_KEY / CREATOR_PACKS_WORKER_BASE env (release-injected
key; app degrades to a clear not_configured error when unset).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(creator-packs): Phase 2 UI — Content Explorer, settings page, wizard step
Adds the three user-facing surfaces for Creator Packs on top of the Phase 1
backend rail. All surfaces HIDE entirely on builds without the release-injected
key (configured=false) so a fork never shows a broken install button.
- Backend: CreatorPackService.isConfigured() + `configured` flag on the
GET /api/creator-packs response; /settings/creator-packs route + controller
action.
- api client + useCreatorPacks hook (shared cached source of configured/packs/
downloads for every surface) + CreatorPackCard (status badges, art fallback,
update pill) + CreatorPacksSection (install-on-click grid + confirm modal with
the license note), reused by the Content Explorer block and settings page.
- Content Explorer: Creator Packs section before Additional Content.
- Settings: new /settings/creator-packs manage page + conditional nav item.
- Easy Setup wizard: new Creator Packs step after Content. Replaces the fragile
hardcoded AI-skip math with a computed activeSteps list so the two optional
steps (Creator Packs + AI) navigate correctly in every on/off combination;
selection state, storage projection, review summary, and finish-install wired.
Browser-tested on NOMAD3 across all surfaces (configured + fork paths), incl.
live install→download→cancel and AI-on/off wizard renumbering.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(creator-packs): use branded pack banners on the cards
Replace the generic colored-block cards with the branded 1060x175 banners we
build into each pack ZIM, shown on both the settings page and the Easy Setup
wizard step (and the Content Explorer block, via the shared card).
- Bundle the seed-pack banners as local webp under admin/public/creator-packs/
so they render offline (no external image dependency, matching the existing
/rogue-support-banner.webp convention).
- CreatorPackCard is now banner-forward: the banner is the hero, with a compact
status/metadata footer (videos · size, Installed/Downloading/Selected/Install,
update pill). Falls back to a simple header if an image is ever missing.
- Prefer an optional catalog `banner_url` (future remote creators) over the
bundled-by-id path; add banner_url to the CreatorPack type + validator.
- Widen the card grids to 1–2 columns since banners are wide.
Browser-tested on NOMAD3: banners render on the settings page and wizard step;
selection/installed/downloading states and storage projection still correct.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(creator-packs): Phase 3 — uninstall, license, release key-injection
Completes the Creator Packs feature.
- Uninstall: CreatorPackService.uninstallPack reuses ZimService.delete (removes
the ZIM, drops it from the Kiwix library, clears the InstalledResource) behind
DELETE /api/creator-packs/:id. A trash control on installed cards appears only
on the settings "manage" surface (allowUninstall) — never on the Content
Explorer block or the wizard — with a danger confirm modal.
- License: draft "Project NOMAD Creator Pack License v1.0" at
collections/creator-pack-license.md (marked DRAFT — pending legal review;
personal-use, no-redistribution, official-channel-only, creators retain
copyright). The install modal links to it ("View license").
- Release key-injection: Dockerfile ARG/ENV CREATOR_PACKS_APP_KEY in the runtime
stage (empty default → source/CI builds ship unconfigured and hide the UI) +
build-primary-image.yml passes it from the CREATOR_PACKS_APP_KEY CI secret.
NOTE FOR JAKE: add that repo secret = the entitlement Worker's key.
- Update flow was already functional (installed-with-update cards → "Update
pack"); verified.
Browser-tested on NOMAD3: uninstall round-trip (file + DB row + kiwix library
cleaned, then reinstalled), settings-only uninstall control, install-modal
license link, and the "Update available" pill via a temporary catalog bump.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(downloads): clean up header merge logic
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: jakeaturner <jturner@cosmistack.com>
* feat(rag): add subject/collection organization to knowledge base
- Add nullable collection field to KbIngestState, propagated through the
embed job, RAG service, and Qdrant point payloads (indexed for filtering)
- Add upload-time category selection and per-file collection reassignment
in the Knowledge Base modal, with a filterable Stored Files table
- Add a 'Search in' collection filter to the chat interface, threaded
through to searchSimilarDocuments as an optional Qdrant filter
- Fix .docx extraction: previously routed through raw-text extraction
(garbage output for a ZIP-based XML format); adds a proper mammoth-based
extractor and a dedicated 'docx' file-type case
* feat(rag): support dynamic KB collection creation, rename, and removal
Extends collection organization with a Manage Collections UI: collections
are created on the fly when a file is assigned to a new name, can be
renamed (bulk-updates every tagged file and Qdrant point), and can be
removed (reassigns tagged files back to Uncategorized rather than
deleting anything).
* fix(rag): use dynamic collections query in chat search filter
chat/index.tsx still imported the static KB_COLLECTIONS constant for its
'Search in' dropdown, inconsistent with KnowledgeBaseModal.tsx which already
uses the live getKnowledgeCollections() query. Renamed/added collections
via the new Manage Collections UI weren't reflected in the chat filter.
* feat(rag): broaden preset tags and add creatable collection combobox
Replaces the survival-specific preset list with general-purpose starter
tags (recipes, diy, health, technology, finance, travel, hobbies,
reference, survival, energy) so the Knowledge Base reads well for
home-lab/reference use, not just prepping.
Adds sanitizeCollectionName() (trim, lowercase, length cap) applied on
every write path server-side, and a dependency-free CollectionCombobox
component replacing the plain <select> + window.prompt pattern for
tagging — autocompletes against presets + tags already in use, with a
'+ Create' option for anything new.
* chore(rag): remove .docx fix from this branch, split into #1100
Per review feedback, the .docx extraction fix is unrelated to the
collections feature and can merge independently. Moved to a standalone
PR (Crosstalk-Solutions/project-nomad#1100) off dev.
* chore: remove unrelated diff noise (lockfile, comments, indentation)
---------
Co-authored-by: John Cortright <jcortright@zscaler.com>
Two defects made chat hang forever with thinking-capable models on the OpenAI-compat
(/v1) path, which NOMAD uses for both local and remote Ollama:
1. Field mismatch. chatStream()/chat() read `delta.thinking` / `message.thinking`,
but Ollama's /v1 endpoint emits thinking tokens as `reasoning`. All thinking output
was silently dropped, so the SSE stream was nothing but empty content+thinking chunks
and never reached done. Now read `thinking ?? reasoning` in both paths (the inline
<think>-tag parser for other backends is unchanged).
2. No abort on client disconnect. When the user gave up and closed the chat, the
upstream generation kept decoding server-side. With Ollama's default
OLLAMA_NUM_PARALLEL=1 that abandoned request occupied the only slot, so every later
chat/RAG request queued behind it and the whole assistant appeared dead. The
controller now wires an AbortController to the response 'close' event and threads the
signal into the OpenAI SDK request, so a disconnect aborts the upstream generation.
Verified on NOMAD2 (qwen3:0.6b, which reports the `thinking` capability and emits
`reasoning` on /v1): before, the stream was endless empty chunks; after, thinking streams
visibly and reaches done. On disconnect, Ollama's decode counter freezes and the server
logs `cancel task` / `slot release`, freeing the slot for the next request.
Note: thinking is still force-on for capable models here; a user-facing per-model
thinking toggle (default off) is a planned follow-up.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Previously, failed downloads showed only an alert icon and a dismiss (X)
button — the user had no way to retry or reach the resource page without
manually re-adding the download and finding the source URL elsewhere.
This commit adds:
- POST /api/downloads/jobs/:jobId/retry endpoint (controller + service)
- retryDownloadJob() API method on the frontend
- Failed-state UI in ActiveDownloads.tsx now shows:
- Retry button (re-dispatches the original download job)
- 'Download page' external link (when the download URL is an HTTP(S) URL)
- Loading state on the retry button while the request is in-flight
- Screenshots documenting before/after UI
Co-authored-by: eizus <hello@cdr.xyz>
Rebuilt on top of dev's RFC #883 state-machine UI rather than the now-defunct
StoredFile shape:
- Extend StoredFileInfo with fileName/size/uploadedAt/isUserUpload
- Populate metadata from on-disk stats in RagService.getStoredFiles
- Add fileSourceSchema validator + getFileContent/downloadFile endpoints
scoped to the uploads directory only (tighter than the original PR — matches
docs_service traversal pattern)
- KnowledgeBaseModal: sortable Size and Uploaded columns; View/Download
buttons on upload-bucket rows; new FileViewerModal for in-browser text
preview. Bucket grouping preserved — sort applies within each bucket.
- Use formatBytes from ~/lib/util rather than redefining
Curated catalog apps could be installed, stopped, and force-reinstalled,
but never removed — the only path off a device was manual docker + DB
surgery. Custom apps already had delete; this adds the equivalent for
curated apps.
POST /api/system/services/uninstall stops and removes the app's
container (optionally its image, same best-effort semantics as custom
app delete) and flips the record back to not-installed so the card
returns to the available catalog. Host bind-mount data is deliberately
left on disk, so a later reinstall picks the app back up where it left
off — unlike force-reinstall, which clears volumes.
Guards: custom apps are rejected (use delete), dependency services are
rejected, and uninstalling a not-installed app is a 409.
UI: installed curated cards get an Uninstall action in the card menu,
with a confirm modal that explains data is preserved and offers the
same remove-image checkbox as custom app delete.
Let users override an app's "Open" link with a reverse-proxy or
local-DNS address (e.g. https://jellyfin.myhomelab.net). Falls back to
the default host+port when unset. Metadata-only — no container changes.
Adds a self-update path for the NOMAD admin/core image that runs without a
human in the loop, gated by layered safety checks. Recreation remains the
sidecar's job; this only decides *whether* to update now and requests it.
An hourly job (AutoUpdateJob) evaluates a side-effect-free decision pipeline
(AutoUpdateService.evaluate):
- opt-in: disabled by default
- in a user-configured local-time window (handles midnight wrap)
- an eligible release: same major (major bumps stay manual), strictly newer,
past a configurable cool-off, GA only (no drafts/prereleases), strict semver
- pre-flight: sidecar present, no in-flight system update / downloads / app
installs, and sufficient host disk (estimated from the registry manifest)
When all pass, it drives SystemUpdateService.requestUpdate() with a vetted tag.
Failure backoff auto-disables after 3 genuine update-request failures; transient
release-lookup errors are skips (offline-first appliances are routinely without
connectivity). Re-enabling clears the backoff state.
Settings UI exposes the toggle, window, and cool-off, with live status (eligible
target, in/out of window, last result/error). A `node ace auto-update:dry-run`
command exercises the full pipeline — and a deterministic --scenarios suite the
pure decision logic — without ever triggering an update.
New KVStore keys under autoUpdate.* hold config + last-run state.
Adds a user-facing trigger to rebuild the Kiwix library index from the
ZIM files currently on disk. Covers the sideload case: a user copies a
.zim onto the box (USB, SSH, network share) outside NOMAD's download
flow, and Kiwix has no way to discover it without regenerating the
library index.
Reuses the existing native KiwixLibraryService.rebuildFromDisk() (which
also extracts embedded favicons natively), so no kiwix-tools container
and no icon-patch step are needed. In library mode (--monitorLibrary)
kiwix-serve hot-reloads the XML automatically; only legacy glob-mode
containers are restarted.
- KiwixLibraryService.rebuildFromDisk now returns the book count; adds
getBookCount() for the before/after delta
- ZimService.rescanLibrary() orchestrates rebuild + legacy restart
- POST /api/zim/rescan-library + ZimController.rescanLibrary
- "Rescan Library" button on the Content Manager page (shown when Kiwix
is installed) with a success toast reporting books found
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Users often saw the assistant disclaim ("Sorry, I couldn't find specific
context regarding X, but here's a general answer...") even when material
that directly answered the query was embedded. Two compounding causes,
both on the read/generation side:
1. The rag_context system prompt explicitly authorized the hedge: it told
the model to fall back to general knowledge and "acknowledge the
limitations," and mandated "According to the information available..."
citations that pushed small models into meta-commentary preambles.
Rewrote it to treat the retrieved context as the primary, authoritative
source, lead with the answer, fall back to general knowledge *silently*,
and never emit "couldn't find specific context" phrasing, while still allowing
the model itself to make some "sanity-check" decisions if the retrieved context
seems wildly incorrect or unrelated to the user's query.
2. The injected context labeled each block with a raw relevance score
(e.g. "Relevance: 42.3%"). nomic-embed cosine scores for genuinely
relevant passages sit ~0.4-0.6, so the number primed the model to
distrust correct context. Dropped the model-visible score (it stays in
the logs) and replaced it with a neutral source-title label.
Also added a conservative, score-scaled heading boost in rerankResults:
when query keywords match a chunk's section/article title (ZIM metadata we
already fetch), nudge its rank. Same diminishing-returns shape as the
existing boosts and gated behind the existing semantic-quality threshold,
so it can't promote a weak match.
Scope note: this removes the visible hedge and improves ranking of
already-retrieved chunks. It does NOT fix retrieval recall — diluted
1500-token chunks that never reach dense search's top-k are unaffected.
That's a follow-up (smaller chunks + BM25/RRF hybrid).
Surfaces NOMAD's previously-silent model-stacking behavior and enforces a
"one chat model in VRAM at a time" invariant (the embedding model is
always exempt). Addresses Chris's NOMAD3 testing observation that
switching the dropdown in the chat header was invisibly slow on low-VRAM
hardware because the prior model was never unloaded — Ollama would
either evict it under memory pressure or load the new one on CPU after
the runner choked.
Three integration points all funnel through one new helper:
- **User changes the model dropdown** in an active chat session →
confirm modal "Switch to {newModel}? Switching to {newModel} will
start a new chat. Your current conversation stays available in the
sidebar." On confirm, fire `keep_alive: 0` against the previous chat
model, clear active session, set the new selection. Cancel snaps the
visible dropdown back to the previous value (no popup state leaks
into `selectedModel`).
- **User clicks a session in the sidebar** → no popup (system-initiated).
Restore the session's stored model into the dropdown and fire
`unloadChatModels(targetModel)` so anything that isn't the target
gets the unload hint.
- **Chat page first mount** → page-load normalization. Anything stacked
from a prior session gets the unload hint with the current selected
model as the target-to-preserve. Guarded by a ref so it only fires
once per page lifetime; gated on `selectedModel` being populated.
Backend surface is a single new helper and a single new route:
`OllamaService.unloadAllChatModelsExcept(targetModel: string | null)`
→ queries `/api/ps`, filters out (a) the embedding model name
(hardcoded `nomic-embed-text:v1.5` to avoid the RagService circular
import) and (b) `targetModel`, fires `POST /api/generate` with empty
prompt + `keep_alive: 0` in parallel against everything else.
Returns the names that were hinted. Best-effort: network or Ollama
errors are logged and swallowed so callers don't fail on housekeeping.
`POST /api/ollama/unload-chat-models` → thin wrapper validating
`{ targetModel?: string | null }`.
Why `keep_alive: 0` is safe against in-flight inference: per Ollama's
scheduler semantics, the hint sets the post-completion eviction timer
to zero — the runner is not terminated. If Session A is mid-response
on gemma when Session B fires the unload, gemma stays resident until
A's request completes, then evicts. The user-visible worst case is the
race where A's longer-running request re-extends the timer back to the
default and the unload is no-op'd; the next transition (or page reload)
gets another chance, and Ollama's own LRU catches up under memory
pressure regardless. Robust in-flight tracking deferred to a follow-up
if we see stale-state in the wild.
Base `rc`: v1.40.0 will inherit everything from rc.6 via the backmerge.
Frontend tests deferred to a follow-up PR; existing inertia tsconfig
errors are pre-existing and unrelated.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Return a discriminated `EmbedSingleFileResult` from `RagService.embedSingleFile`
with `code: 'not_found' | 'inflight' | 'delete_failed' | 'dispatch_failed'` on
failure. `RagController.embedFile` now maps those codes to the correct status
instead of collapsing every failure to 409:
- not_found → 404
- inflight → 409
- delete_failed → 500
- dispatch_failed → 500
The `code` is also included in the JSON body so clients can branch without
string-matching `error`.
Closes the Manual-mode UX dead-end: after toggling 'Auto-index new content
for AI?' to Manual, a freshly-downloaded ZIM (or any pending_decision file)
had no UI path to opt in for embedding short of the global Sync Storage /
Re-embed All bulk actions. Per RFC #883 §5, each Stored Files row now
carries a state pill and an adaptive single-button action.
State pill (left of any existing warning chips):
- 'Indexed' — green; row had chunks in Qdrant or state row is 'indexed'
- 'Not Indexed' — neutral; state is pending_decision or browse_only
- 'Failed' — red
- 'Stalled' — amber
- admin_docs collapsed row has no pill ('Managed by NOMAD' carries it)
Adaptive action button (paired with the existing Delete button per row):
- pending_decision → 'Index' (force=false)
- browse_only → 'Index' (force=true)
- failed / stalled → 'Retry' (force=true)
- indexed + warning chip → 'Re-embed' (force=true; confirm modal first)
- indexed healthy / null → no action button (bulk Re-embed All covers it)
Backend: GET /api/rag/files now returns
{ files: Array<{ source, state, chunksEmbedded }> }
instead of a flat string[]. State + chunk-count come from a single
KbIngestState query unioned into the existing Qdrant-derived source list
(no new round trips). New POST /api/rag/files/embed validates the source is
known, refuses if any inflight job already targets the same filePath
(prevents double-click duplicate-chunk hazard), pre-deletes Qdrant points
when force=true, then dispatches via the existing _dispatchEmbedJobsFor
helper used by reembedAll.
Per-file Re-embed (force=true on an already-indexed file) routes through a
StyledModal confirmation since it deletes existing vectors before queueing
a fresh job — same destructive-action weight as Delete's inline confirm but
heavier since it affects search until the rebuild finishes.
Folds in PR #907's blank-screen fix because my new render needs the same
generic restored: `<StyledTable<KbFileGroup>>` and `record.displayName`
(instead of the unresolved `sourceToDisplayName(record.source)` that ships
in rc.5 and ReferenceErrors on modal open). PR #907 also adds title
tooltips on the three bulk-action buttons; those tooltips are NOT included
here — let PR #907 land first or independently for that part.
Multi-select bulk-opt-in deferred per discussion: most Manual-mode users
ingest 1-2 files at a time, the existing global toggle covers the bulk
case, and checkboxes would expand scope past what rc.6 should hold. Will
file a follow-up issue for an 'Index N pending files' single-click button
once this lands.
Tests-in-PR scope was limited to keeping `kb_file_grouping.spec.ts` green
after the StoredFileInfo[] signature change (added asInfos() wrapper).
Dedicated unit tests for embedSingleFile (unknown source / inflight refused
/ force=true delete-then-dispatch) and the new state-pill rendering will
land in a follow-up PR alongside Playwright coverage of the row actions.
Verification path: NOMAD3 currently runs project-nomad-admin:integration-
rc6-preview (PRs #907 + #908 atop rc.5). After this branch is built into a
new integration tag, I'll re-run targeted Playwright UAT on the KB modal
covering: state pill rendering per state, Index click on pending_decision
opts in cleanly, Retry on failed re-dispatches successfully, Re-embed
confirmation modal copy + delete-then-dispatch on the military-medicine
partial-stall row, and Delete flow untouched.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When a user opens AI Chat with content available but no global ingest
policy yet recorded, surface a one-time banner above the chat header
asking how they want new content handled:
- 'Index existing content' -> sets rag.defaultIngestPolicy=Always and
triggers a sync so pending_decision files queue immediately
- 'Maybe later' -> sets policy=Manual; existing and future content
waits in pending_decision until the user opts in from the KB modal
After either button is clicked the banner never reappears, because both
write the policy KV (the same one #894 manages via the KB modal toggle).
There is intentionally no 'dismiss without deciding' X — that would just
re-show the banner forever.
Backend
- New GET /api/rag/policy-prompt-state returns
{shouldPrompt, hasContent, totalFiles}
- RagService.getPolicyPromptState() reads KVStore('rag.defaultIngestPolicy')
and counts kb_ingest_state rows; shouldPrompt is true only when policy
is null AND scanner has seen >=1 file (avoids prompting on empty NOMADs)
Frontend
- New KbPolicyPromptBanner component (~120 LOC) handles the two-button
decision flow with optimistic loading state, success/error toasts, and
invalidates kbPolicyPromptState + ingestPolicy + embed-jobs + storedFiles
on success
- Mounted in components/chat/index.tsx as the first child of the main
content column so it sits above the chat title bar without taking space
when shouldPrompt is false (renders nothing)
- Reads aiAssistantName from Inertia page props so banner copy matches
the user's chosen assistant name
Stacks on feat/kb-policy-toggle (#894) because the policy KV mechanism
it writes through is introduced there. Both can land in rc.5; this PR
auto-rebases to rc once #894 merges.
Existing users on first upgrade to v1.32.0 will see this banner on first
chat visit post-upgrade — an explicit opt-in moment for content that was
already on disk. New users see it the first time they have curated
content downloaded.
`computeFileWarnings()` previously caught all errors and returned an empty
map, which the frontend rendered as "every file is healthy" — reintroducing
exactly the silent-failure mode this surface exists to expose.
Return `{ ok, warnings }`; flip `ok: false` from the catch. KB modal renders
an inline amber notice under the Stored Files header when `ok === false`,
leaving per-row warning rendering untouched. Transient failures self-heal on
the next 30s poll; no toast spam.
