mirror of
https://github.com/torvalds/linux.git
synced 2026-07-30 03:01:41 +02:00
Linux kernel source tree
fbdaffe41a
FUJITA Tomonori says: ==================== net: phy: add Applied Micro QT2025 PHY driver This patchset adds a PHY driver for Applied Micro Circuits Corporation QT2025. The first patch adds Rust equivalent to include/linux/sizes.h, makes code more readable. The 2-5th patches update the PHYLIB Rust bindings. The 4th and 5th patches have been reviewed previously in a different thread [1]. QT2025 PHY support was implemented as a part of an Ethernet driver for Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax, QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks went out of business and the driver wasn't merged into mainline. But it's still distributed with some of the hardware (and also available on some vendor sites). The original driver handles multiple PHY hardware (AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and MV88E2010). I divided the original driver into MAC and PHY drivers and implemented a QT2025 PHY driver in Rust. The MAC driver for Tehuti Networks TN40xx chips was already merged in 6.11-rc1. The MAC and this PHY drivers have been tested with Edimax EN-9320SFP+ 10G network adapter. [1] https://lore.kernel.org/rust-for-linux/20240607052113.69026-1-fujita.tomonori@gmail.com/ v7: - add Trevor as Reviewer to MAINTAINERS file entry - add Trevor Reviewed-by - add/fix comments - replace uppercase hex with lowercase - remove unnecessary code - update the commit message (1st patch) v6: https://lore.kernel.org/netdev/20240820225719.91410-1-fujita.tomonori@gmail.com/ - improve comments - make the logic to load firmware more readable - add Copy trait to reg::{C22 and C45} - add Trevor Reviewed-by v5: https://lore.kernel.org/netdev/20240819005345.84255-1-fujita.tomonori@gmail.com/ - fix the comments (3th patch) - add RUST_FW_LOADER_ABSTRACTIONS dependency - add Andrew and Benno Reviewed-by v4: https://lore.kernel.org/netdev/20240817051939.77735-1-fujita.tomonori@gmail.com/ - fix the comments - add Andrew's Reviewed-by - fix the order of tags - remove wrong endianness conversion v3: https://lore.kernel.org/netdev/20240804233835.223460-1-fujita.tomonori@gmail.com/ - use addr_of_mut!` to avoid intermediate mutable reference - update probe callback's Safety comment - add MODULE_FIRMWARE equivalent - add Alice's Reviewed-by v2: https://lore.kernel.org/netdev/20240731042136.201327-1-fujita.tomonori@gmail.com/ - add comments in accordance with the hw datasheet - unify C22 and C45 APIs - load firmware in probe callback instead of config_init - use firmware API - handle firmware endian - check firmware size - use SZ_*K constants - avoid confusing phy_id variable v1: https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/ ==================== rom: FUJITA Tomonori <fujita.tomonori@gmail.com> To: netdev@vger.kernel.org Cc: rust-for-linux@vger.kernel.org, andrew@lunn.ch, tmgross@umich.edu, miguel.ojeda.sandonis@gmail.com, benno.lossin@proton.me, aliceryhl@google.com Subject: [PATCH net-next v7 0/6] net: phy: add Applied Micro QT2025 PHY driver Date: Sat, 24 Aug 2024 02:06:10 +0000 [thread overview] Message-ID: <20240824020617.113828-1-fujita.tomonori@gmail.com> (raw) This patchset adds a PHY driver for Applied Micro Circuits Corporation QT2025. The first patch adds Rust equivalent to include/linux/sizes.h, makes code more readable. The 2-5th patches update the PHYLIB Rust bindings. The 4th and 5th patches have been reviewed previously in a different thread [1]. QT2025 PHY support was implemented as a part of an Ethernet driver for Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax, QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks went out of business and the driver wasn't merged into mainline. But it's still distributed with some of the hardware (and also available on some vendor sites). The original driver handles multiple PHY hardware (AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and MV88E2010). I divided the original driver into MAC and PHY drivers and implemented a QT2025 PHY driver in Rust. The MAC driver for Tehuti Networks TN40xx chips was already merged in 6.11-rc1. The MAC and this PHY drivers have been tested with Edimax EN-9320SFP+ 10G network adapter. [1] https://lore.kernel.org/rust-for-linux/20240607052113.69026-1-fujita.tomonori@gmail.com/ v7: - add Trevor as Reviewer to MAINTAINERS file entry - add Trevor Reviewed-by - add/fix comments - replace uppercase hex with lowercase - remove unnecessary code - update the commit message (1st patch) v6: https://lore.kernel.org/netdev/20240820225719.91410-1-fujita.tomonori@gmail.com/ - improve comments - make the logic to load firmware more readable - add Copy trait to reg::{C22 and C45} - add Trevor Reviewed-by v5: https://lore.kernel.org/netdev/20240819005345.84255-1-fujita.tomonori@gmail.com/ - fix the comments (3th patch) - add RUST_FW_LOADER_ABSTRACTIONS dependency - add Andrew and Benno Reviewed-by v4: https://lore.kernel.org/netdev/20240817051939.77735-1-fujita.tomonori@gmail.com/ - fix the comments - add Andrew's Reviewed-by - fix the order of tags - remove wrong endianness conversion v3: https://lore.kernel.org/netdev/20240804233835.223460-1-fujita.tomonori@gmail.com/ - use addr_of_mut!` to avoid intermediate mutable reference - update probe callback's Safety comment - add MODULE_FIRMWARE equivalent - add Alice's Reviewed-by v2: https://lore.kernel.org/netdev/20240731042136.201327-1-fujita.tomonori@gmail.com/ - add comments in accordance with the hw datasheet - unify C22 and C45 APIs - load firmware in probe callback instead of config_init - use firmware API - handle firmware endian - check firmware size - use SZ_*K constants - avoid confusing phy_id variable v1: https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/ Signed-off-by: David S. Miller <davem@davemloft.net> rom: FUJITA Tomonori <fujita.tomonori@gmail.com> To: netdev@vger.kernel.org Cc: rust-for-linux@vger.kernel.org, andrew@lunn.ch, tmgross@umich.edu, miguel.ojeda.sandonis@gmail.com, benno.lossin@proton.me, aliceryhl@google.com Subject: [PATCH net-next v7 0/6] net: phy: add Applied Micro QT2025 PHY driver Date: Sat, 24 Aug 2024 02:06:10 +0000 [thread overview] Message-ID: <20240824020617.113828-1-fujita.tomonori@gmail.com> (raw) This patchset adds a PHY driver for Applied Micro Circuits Corporation QT2025. The first patch adds Rust equivalent to include/linux/sizes.h, makes code more readable. The 2-5th patches update the PHYLIB Rust bindings. The 4th and 5th patches have been reviewed previously in a different thread [1]. QT2025 PHY support was implemented as a part of an Ethernet driver for Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax, QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks went out of business and the driver wasn't merged into mainline. But it's still distributed with some of the hardware (and also available on some vendor sites). The original driver handles multiple PHY hardware (AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and MV88E2010). I divided the original driver into MAC and PHY drivers and implemented a QT2025 PHY driver in Rust. The MAC driver for Tehuti Networks TN40xx chips was already merged in 6.11-rc1. The MAC and this PHY drivers have been tested with Edimax EN-9320SFP+ 10G network adapter. [1] https://lore.kernel.org/rust-for-linux/20240607052113.69026-1-fujita.tomonori@gmail.com/ v7: - add Trevor as Reviewer to MAINTAINERS file entry - add Trevor Reviewed-by - add/fix comments - replace uppercase hex with lowercase - remove unnecessary code - update the commit message (1st patch) v6: https://lore.kernel.org/netdev/20240820225719.91410-1-fujita.tomonori@gmail.com/ - improve comments - make the logic to load firmware more readable - add Copy trait to reg::{C22 and C45} - add Trevor Reviewed-by v5: https://lore.kernel.org/netdev/20240819005345.84255-1-fujita.tomonori@gmail.com/ - fix the comments (3th patch) - add RUST_FW_LOADER_ABSTRACTIONS dependency - add Andrew and Benno Reviewed-by v4: https://lore.kernel.org/netdev/20240817051939.77735-1-fujita.tomonori@gmail.com/ - fix the comments - add Andrew's Reviewed-by - fix the order of tags - remove wrong endianness conversion v3: https://lore.kernel.org/netdev/20240804233835.223460-1-fujita.tomonori@gmail.com/ - use addr_of_mut!` to avoid intermediate mutable reference - update probe callback's Safety comment - add MODULE_FIRMWARE equivalent - add Alice's Reviewed-by v2: https://lore.kernel.org/netdev/20240731042136.201327-1-fujita.tomonori@gmail.com/ - add comments in accordance with the hw datasheet - unify C22 and C45 APIs - load firmware in probe callback instead of config_init - use firmware API - handle firmware endian - check firmware size - use SZ_*K constants - avoid confusing phy_id variable v1: https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/ Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> |
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .editorconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.