mirror of
https://github.com/torvalds/linux.git
synced 2026-07-27 09:36:22 +02:00
Linux kernel source tree
e1bf796284
The IOCB_DONTCACHE writeback path in generic_write_sync() calls
filemap_flush_range() on every write, submitting writeback inline in
the writer's context. Perf lock contention profiling shows the
performance problem is not lock contention but the writeback submission
work itself — walking the page tree and submitting I/O blocks the writer
for milliseconds, inflating p99.9 latency from 23ms (buffered) to 93ms
(dontcache).
Replace the inline filemap_flush_range() call with a flusher kick that
drains dirty pages in the background. This moves writeback submission
completely off the writer's hot path.
To avoid flushing unrelated buffered dirty data, add a dedicated
WB_start_dontcache bit and wb_check_start_dontcache() handler that uses
the per-wb WB_DONTCACHE_DIRTY counter to determine how many pages to
write back. The flusher writes back that many pages from the oldest dirty
inodes (not restricted to dontcache-specific inodes). This helps
preserve I/O batching while limiting the scope of expedited writeback.
Like WB_start_all, the WB_start_dontcache bit coalesces multiple
DONTCACHE writes into a single flusher wakeup without per-write
allocations. Use test_and_clear_bit to atomically consume the kick
request before reading the dirty counter and starting writeback, so that
concurrent DONTCACHE writes during writeback can re-set the bit and
schedule a follow-up flusher run.
Read the dirty counter with wb_stat_sum() (aggregating per-CPU batches)
rather than wb_stat() (which reads only the global counter) to ensure
small writes below the percpu batch threshold are visible to the flusher.
In filemap_dontcache_kick_writeback(), set the WB_start_dontcache bit
inside the unlocked_inode_to_wb_begin/end section for correct cgroup
writeback domain targeting, but defer the wb_wakeup() call until after
the section ends, since wb_wakeup() uses spin_unlock_irq() which would
unconditionally re-enable interrupts while the i_pages xa_lock may still
be held under irqsave during a cgroup writeback switch. Pin the wb with
wb_get() inside the RCU critical section before calling wb_wakeup()
outside it, since cgroup bdi_writeback structures are RCU-freed and the
wb pointer could become invalid after unlocked_inode_to_wb_end() drops
the RCU read lock.
Also add WB_REASON_DONTCACHE as a new writeback reason for tracing
visibility.
dontcache-bench results (same host, T6F_SKL_1920GBF, 251 GiB RAM,
xfs on NVMe, fio io_uring):
Buffered and direct I/O paths are unaffected by this patchset. All
improvements are confined to the dontcache path:
Single-stream throughput (MB/s):
Before After Change
seq-write/dontcache 298 897 +201%
rand-write/dontcache 131 236 +80%
Tail latency improvements (seq-write/dontcache):
p99: 135,266 us -> 23,986 us (-82%)
p99.9: 8,925,479 us -> 28,443 us (-99.7%)
Multi-writer (4 jobs, sequential write):
Before After Change
dontcache aggregate (MB/s) 2,529 4,532 +79%
dontcache p99 (us) 8,553 1,002 -88%
dontcache p99.9 (us) 109,314 1,057 -99%
Dontcache multi-writer throughput now matches buffered (4,532 vs
4,616 MB/s).
32-file write (Axboe test):
Before After Change
dontcache aggregate (MB/s) 1,548 3,499 +126%
dontcache p99 (us) 10,170 602 -94%
Peak dirty pages (MB) 1,837 213 -88%
Dontcache now reaches 81% of buffered throughput (was 35%).
Competing writers (dontcache vs buffered, separate files):
Before After
buffered writer 868 433 MB/s
dontcache writer 415 433 MB/s
Aggregate 1,284 866 MB/s
Previously the buffered writer starved the dontcache writer 2:1.
With per-bdi_writeback tracking, both writers now receive equal
bandwidth. The aggregate matches the buffered-vs-buffered baseline
(863 MB/s), indicating fair sharing regardless of I/O mode.
The dontcache writer's p99.9 latency collapsed from 119 ms to
33 ms (-73%), eliminating the severe periodic stalls seen in the
baseline. Both writers now share identical latency profiles,
matching the buffered-vs-buffered pattern.
The per-bdi_writeback dirty tracking dramatically reduces peak dirty
pages in dontcache workloads, with the 32-file test dropping from
1.8 GB to 213 MB. Dontcache sequential write throughput triples and
multi-writer throughput reaches parity with buffered I/O, with tail
latencies collapsing by 1-2 orders of magnitude.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260511-dontcache-v7-3-2848ddce8090@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .clippy.toml | ||
| .cocciconfig | ||
| .editorconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .pylintrc | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel ============ The Linux kernel is the core of any Linux operating system. It manages hardware, system resources, and provides the fundamental services for all other software. Quick Start ----------- * Report a bug: See Documentation/admin-guide/reporting-issues.rst * Get the latest kernel: https://kernel.org * Build the kernel: See Documentation/admin-guide/quickly-build-trimmed-linux.rst * Join the community: https://lore.kernel.org/ Essential Documentation ----------------------- All users should be familiar with: * Building requirements: Documentation/process/changes.rst * Code of Conduct: Documentation/process/code-of-conduct.rst * License: See COPYING Documentation can be built with make htmldocs or viewed online at: https://www.kernel.org/doc/html/latest/ Who Are You? ============ Find your role below: * New Kernel Developer - Getting started with kernel development * Academic Researcher - Studying kernel internals and architecture * Security Expert - Hardening and vulnerability analysis * Backport/Maintenance Engineer - Maintaining stable kernels * System Administrator - Configuring and troubleshooting * Maintainer - Leading subsystems and reviewing patches * Hardware Vendor - Writing drivers for new hardware * Distribution Maintainer - Packaging kernels for distros * AI Coding Assistant - LLMs and AI-powered development tools For Specific Users ================== New Kernel Developer -------------------- Welcome! Start your kernel development journey here: * Getting Started: Documentation/process/development-process.rst * Your First Patch: Documentation/process/submitting-patches.rst * Coding Style: Documentation/process/coding-style.rst * Build System: Documentation/kbuild/index.rst * Development Tools: Documentation/dev-tools/index.rst * Kernel Hacking Guide: Documentation/kernel-hacking/hacking.rst * Core APIs: Documentation/core-api/index.rst Academic Researcher ------------------- Explore the kernel's architecture and internals: * Researcher Guidelines: Documentation/process/researcher-guidelines.rst * Memory Management: Documentation/mm/index.rst * Scheduler: Documentation/scheduler/index.rst * Networking Stack: Documentation/networking/index.rst * Filesystems: Documentation/filesystems/index.rst * RCU (Read-Copy Update): Documentation/RCU/index.rst * Locking Primitives: Documentation/locking/index.rst * Power Management: Documentation/power/index.rst Security Expert --------------- Security documentation and hardening guides: * Security Documentation: Documentation/security/index.rst * LSM Development: Documentation/security/lsm-development.rst * Self Protection: Documentation/security/self-protection.rst * Reporting Vulnerabilities: Documentation/process/security-bugs.rst * CVE Procedures: Documentation/process/cve.rst * Embargoed Hardware Issues: Documentation/process/embargoed-hardware-issues.rst * Security Features: Documentation/userspace-api/seccomp_filter.rst Backport/Maintenance Engineer ----------------------------- Maintain and stabilize kernel versions: * Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst * Backporting Guide: Documentation/process/backporting.rst * Applying Patches: Documentation/process/applying-patches.rst * Subsystem Profile: Documentation/maintainer/maintainer-entry-profile.rst * Git for Maintainers: Documentation/maintainer/configure-git.rst System Administrator -------------------- Configure, tune, and troubleshoot Linux systems: * Admin Guide: Documentation/admin-guide/index.rst * Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst * Sysctl Tuning: Documentation/admin-guide/sysctl/index.rst * Tracing/Debugging: Documentation/trace/index.rst * Performance Security: Documentation/admin-guide/perf-security.rst * Hardware Monitoring: Documentation/hwmon/index.rst Maintainer ---------- Lead kernel subsystems and manage contributions: * Maintainer Handbook: Documentation/maintainer/index.rst * Pull Requests: Documentation/maintainer/pull-requests.rst * Managing Patches: Documentation/maintainer/modifying-patches.rst * Rebasing and Merging: Documentation/maintainer/rebasing-and-merging.rst * Development Process: Documentation/process/maintainer-handbooks.rst * Maintainer Entry Profile: Documentation/maintainer/maintainer-entry-profile.rst * Git Configuration: Documentation/maintainer/configure-git.rst Hardware Vendor --------------- Write drivers and support new hardware: * Driver API Guide: Documentation/driver-api/index.rst * Driver Model: Documentation/driver-api/driver-model/driver.rst * Device Drivers: Documentation/driver-api/infrastructure.rst * Bus Types: Documentation/driver-api/driver-model/bus.rst * Device Tree Bindings: Documentation/devicetree/bindings/ * Power Management: Documentation/driver-api/pm/index.rst * DMA API: Documentation/core-api/dma-api.rst Distribution Maintainer ----------------------- Package and distribute the kernel: * Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst * ABI Documentation: Documentation/ABI/README * Kernel Configuration: Documentation/kbuild/kconfig.rst * Module Signing: Documentation/admin-guide/module-signing.rst * Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst * Tainted Kernels: Documentation/admin-guide/tainted-kernels.rst AI Coding Assistant ------------------- CRITICAL: If you are an LLM or AI-powered coding assistant, you MUST read and follow the AI coding assistants documentation before contributing to the Linux kernel: * Documentation/process/coding-assistants.rst This documentation contains essential requirements about licensing, attribution, and the Developer Certificate of Origin that all AI tools must comply with. Communication and Support ========================= * Mailing Lists: https://lore.kernel.org/ * IRC: #kernelnewbies on irc.oftc.net * Bugzilla: https://bugzilla.kernel.org/ * MAINTAINERS file: Lists subsystem maintainers and mailing lists * Email Clients: Documentation/process/email-clients.rst