mirror of
https://github.com/torvalds/linux.git
synced 2026-09-21 12:20:02 +02:00
6f616757dd
The "usxgmii" phy-mode that the Felix switch ports support on LS1028A is not quite USXGMII, it is defined by the USXGMII multiport specification document as 10G-QXGMII. It uses the same signaling as USXGMII, but it multiplexes 4 ports over the link, resulting in a maximum speed of 2.5G per port. This change is needed in preparation for the lynx-10g SerDes driver on LS1028A, which will make a more clear distinction between usxgmii (supported on lane 0) and 10g-qxgmii (supported on lane 1). These protocols have their configuration in different PCCR registers (PCCRB vs PCCR9). Continue parsing and supporting single-port-per-lane USXGMII when found in the device tree as usual (because it works), but add support for 10G-QXGMII too. Using phy-mode = "10g-qxgmii" will be required when modifying the device trees to specify a "phys" phandle to the SerDes lane. The result when the "phys" phandle is present but the phy-mode is wrong is undefined. The only PHY driver in known use with this phy-mode, AQR412C, will gain logic to transition from "usxgmii" to "10g-qxgmii" in a future change. Prepare the driver by also setting PHY_INTERFACE_MODE_10G_QXGMII in supported_interfaces when PHY_INTERFACE_MODE_USXGMII is there, to prevent breakage with existing device trees. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250903130730.2836022-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|---|---|---|
| .. | ||
| b53 | ||
| hirschmann | ||
| lantiq | ||
| microchip | ||
| mv88e6xxx | ||
| ocelot | ||
| qca | ||
| realtek | ||
| sja1105 | ||
| xrs700x | ||
| bcm_sf2_cfp.c | ||
| bcm_sf2_regs.h | ||
| bcm_sf2.c | ||
| bcm_sf2.h | ||
| dsa_loop_bdinfo.c | ||
| dsa_loop.c | ||
| dsa_loop.h | ||
| Kconfig | ||
| ks8995.c | ||
| lan9303_i2c.c | ||
| lan9303_mdio.c | ||
| lan9303-core.c | ||
| lan9303.h | ||
| Makefile | ||
| mt7530-mdio.c | ||
| mt7530-mmio.c | ||
| mt7530.c | ||
| mt7530.h | ||
| mv88e6060.c | ||
| mv88e6060.h | ||
| rzn1_a5psw.c | ||
| rzn1_a5psw.h | ||
| vitesse-vsc73xx-core.c | ||
| vitesse-vsc73xx-platform.c | ||
| vitesse-vsc73xx-spi.c | ||
| vitesse-vsc73xx.h | ||