| .. |
|
aacraid
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
aic7xxx
|
aic7xxx: switch to ->show_info()
|
2013-04-09 14:13:26 -04:00 |
|
aic7xxx_old
|
aix7xxx_old: switch to ->show_info()
|
2013-04-09 14:13:28 -04:00 |
|
aic94xx
|
[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
|
2013-05-10 07:47:52 -07:00 |
|
arcmsr
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
arm
|
acornscsi: switch to ->show_info()
|
2013-04-09 14:13:27 -04:00 |
|
be2iscsi
|
[SCSI] be2iscsi: Bump the driver version to 10.0.467.0
|
2013-05-02 08:22:19 -07:00 |
|
bfa
|
SCSI: bfa: Chinook quad port 16G FC HBA claim issue
|
2014-02-06 11:08:17 -08:00 |
|
bnx2fc
|
[SCSI] bnx2fc: Bumped version to 1.0.14
|
2013-05-02 07:32:26 -07:00 |
|
bnx2i
|
treewide: Fix typo in printk and comments
|
2013-04-24 16:43:00 +02:00 |
|
csiostor
|
[SCSI] csiostor: off by one error
|
2013-05-02 07:37:10 -07:00 |
|
cxgbi
|
[SCSI] cxgb4i: Remove the scsi host device when removing device
|
2013-01-30 11:58:06 +11:00 |
|
device_handler
|
[SCSI] scsi_dh_alua: Add module parameter to allow failover to non preferred path without STPG
|
2013-04-11 16:00:31 -07:00 |
|
dpt
|
atomic: use <linux/atomic.h>
|
2011-07-26 16:49:47 -07:00 |
|
fcoe
|
This patch fixes a critical bug that was introduced in 3.9
|
2013-06-26 23:08:22 -07:00 |
|
fnic
|
lseek(fd, n, SEEK_END) does *not* go to eof - n
|
2013-06-16 08:10:53 -10:00 |
|
ibmvscsi
|
[SCSI] ibmvfc: Driver version 1.0.11
|
2013-05-02 11:58:18 -07:00 |
|
isci
|
SCSI: isci: Fix a race condition in the SSP task management path
|
2013-08-04 16:50:40 +08:00 |
|
libfc
|
libfc: extend ex_lock to protect all of fc_seq_send
|
2013-05-10 10:19:23 -07:00 |
|
libsas
|
SCSI: libsas: fix usage of ata_tf_to_fis
|
2013-12-11 22:36:27 -08:00 |
|
lpfc
|
lseek(fd, n, SEEK_END) does *not* go to eof - n
|
2013-06-16 08:10:53 -10:00 |
|
megaraid
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
mpt2sas
|
SCSI: mpt2sas: Fix for issue Missing delay not getting set during system bootup
|
2013-07-25 14:07:31 -07:00 |
|
mpt3sas
|
SCSI: Allow MPT Fusion SAS 3.0 driver to be built into the kernel
|
2013-09-26 17:18:01 -07:00 |
|
mvsas
|
[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
|
2013-05-10 07:47:52 -07:00 |
|
osd
|
block: do not pass disk names as format strings
|
2013-07-13 11:42:26 -07:00 |
|
pcmcia
|
nsp_cs: switch to ->show_info()
|
2013-04-09 14:13:21 -04:00 |
|
pm8001
|
SCSI: pm80xx: fix Adaptec 71605H hang
|
2013-09-07 22:09:58 -07:00 |
|
qla2xxx
|
SCSI: qla2xxx: Properly set the tagging for commands.
|
2013-08-04 16:50:41 +08:00 |
|
qla4xxx
|
[SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used
|
2013-05-10 07:47:53 -07:00 |
|
sym53c8xx_2
|
sym53c8xx_2: switch to ->show_info()
|
2013-04-09 14:13:15 -04:00 |
|
ufs
|
[SCSI] ufs: Correct the expected data transfersize
|
2013-05-02 16:16:50 -07:00 |
|
.gitignore
|
|
|
|
3w-9xxx.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
3w-9xxx.h
|
|
|
|
3w-sas.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
3w-sas.h
|
|
|
|
3w-xxxx.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
3w-xxxx.h
|
|
|
|
53c700_d.h_shipped
|
|
|
|
53c700.c
|
Remove all #inclusions of asm/system.h
|
2012-03-28 18:30:03 +01:00 |
|
53c700.h
|
|
|
|
53c700.scr
|
|
|
|
a100u2w.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
a100u2w.h
|
|
|
|
a2091.c
|
switch wd33c93 to ->show_info()
|
2013-04-09 14:13:15 -04:00 |
|
a2091.h
|
|
|
|
a3000.c
|
switch wd33c93 to ->show_info()
|
2013-04-09 14:13:15 -04:00 |
|
a3000.h
|
|
|
|
a4000t.c
|
|
|
|
advansys.c
|
advansys: fix buggered formats - unsigned long != u32 on 64bit
|
2013-04-09 14:13:22 -04:00 |
|
aha152x.c
|
aha152x: switch to ->show_info()
|
2013-04-09 14:13:22 -04:00 |
|
aha152x.h
|
|
|
|
aha1542.c
|
treewide: Put a space between #include and FILE
|
2012-06-28 11:44:36 +02:00 |
|
aha1542.h
|
|
|
|
aha1740.c
|
aha1740: switch to ->show_info()
|
2013-04-09 14:13:23 -04:00 |
|
aha1740.h
|
|
|
|
aic7xxx_old.c
|
aix7xxx_old: switch to ->show_info()
|
2013-04-09 14:13:28 -04:00 |
|
atari_NCR5380.c
|
atari_scsi: switch to ->show_info()
|
2013-04-09 14:13:29 -04:00 |
|
atari_scsi.c
|
atari_scsi: switch to ->show_info()
|
2013-04-09 14:13:29 -04:00 |
|
atari_scsi.h
|
atari_scsi: switch to ->show_info()
|
2013-04-09 14:13:29 -04:00 |
|
atp870u.c
|
atp870u: switch to ->show_info()
|
2013-04-09 14:13:24 -04:00 |
|
atp870u.h
|
|
|
|
BusLogic.c
|
BusLogic: switch to ->show_info()
|
2013-04-09 14:13:19 -04:00 |
|
BusLogic.h
|
BusLogic: switch to ->show_info()
|
2013-04-09 14:13:19 -04:00 |
|
bvme6000_scsi.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
ch.c
|
scsi: convert to idr_alloc()
|
2013-02-27 19:10:18 -08:00 |
|
constants.c
|
[SCSI] add DID_TARGET_FAILURE and DID_NEXUS_FAILURE to hostbyte_table in constants.c
|
2012-09-14 11:58:53 +01:00 |
|
dc395x.c
|
dc395x: switch to ->show_info()
|
2013-04-09 14:13:24 -04:00 |
|
dc395x.h
|
|
|
|
dmx3191d.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
dpt_i2o.c
|
dpt_i2o: switch to ->show_info()
|
2013-04-09 14:13:24 -04:00 |
|
dpti.h
|
|
|
|
dtc.c
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
dtc.h
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
eata_generic.h
|
|
|
|
eata_pio.c
|
eata_pio: switch to ->show_info()
|
2013-04-09 14:13:23 -04:00 |
|
eata_pio.h
|
|
|
|
eata.c
|
|
|
|
esp_scsi.c
|
esp_scsi: Fix tag state corruption when autosensing.
|
2013-10-13 16:08:32 -07:00 |
|
esp_scsi.h
|
esp_scsi: Fix tag state corruption when autosensing.
|
2013-10-13 16:08:32 -07:00 |
|
fdomain.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
fdomain.h
|
|
|
|
FlashPoint.c
|
|
|
|
g_NCR5380_mmio.c
|
|
|
|
g_NCR5380.c
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
g_NCR5380.h
|
|
|
|
gdth_ioctl.h
|
|
|
|
gdth_proc.c
|
gdth: switch to ->show_info()
|
2013-04-09 14:13:16 -04:00 |
|
gdth_proc.h
|
gdth: switch to ->show_info()
|
2013-04-09 14:13:16 -04:00 |
|
gdth.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
gdth.h
|
gdth: switch to ->show_info()
|
2013-04-09 14:13:16 -04:00 |
|
gvp11.c
|
switch wd33c93 to ->show_info()
|
2013-04-09 14:13:15 -04:00 |
|
gvp11.h
|
|
|
|
hosts.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
hpsa_cmd.h
|
[SCSI] hpsa: dial down lockup detection during firmware flash
|
2012-05-10 09:19:39 +01:00 |
|
hpsa.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
hpsa.h
|
[SCSI] hpsa: dial down lockup detection during firmware flash
|
2012-05-10 09:19:39 +01:00 |
|
hptiop.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
hptiop.h
|
[SCSI] hptiop: Support HighPoint RR4520/RR4522 HBA
|
2012-11-27 08:59:43 +04:00 |
|
imm.c
|
imm: switch to ->show_info()
|
2013-04-09 14:13:16 -04:00 |
|
imm.h
|
|
|
|
in2000.c
|
in2000: switch to ->show_info()
|
2013-04-09 14:13:25 -04:00 |
|
in2000.h
|
|
|
|
initio.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
initio.h
|
|
|
|
ipr.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
ipr.h
|
[SCSI] ipr: Avoid target_destroy accessing memory after it was freed
|
2013-05-12 15:07:42 -07:00 |
|
ips.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
ips.h
|
ips: switch to ->show_info()
|
2013-04-09 14:13:27 -04:00 |
|
iscsi_boot_sysfs.c
|
switch ->is_visible() to returning umode_t
|
2012-01-03 22:54:55 -05:00 |
|
iscsi_tcp.c
|
[SCSI] iscsi_tcp: support PF_MEMALLOC/__GFP_MEMALLOC
|
2013-04-11 16:55:04 -07:00 |
|
iscsi_tcp.h
|
|
|
|
jazz_esp.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
Kconfig
|
SCSI: lpfc: Don't force CONFIG_GENERIC_CSUM on
|
2013-08-29 09:47:39 -07:00 |
|
lasi700.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
libiscsi_tcp.c
|
SCSI updates on 20120319
|
2012-03-22 12:55:29 -07:00 |
|
libiscsi.c
|
[SCSI] libiscsi: avoid unnecessary multiple NULL assignments
|
2013-04-11 16:54:01 -07:00 |
|
libsrp.c
|
scsi: Fix up files implicitly depending on module.h inclusion
|
2011-10-31 19:31:24 -04:00 |
|
mac_esp.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
mac_scsi.c
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
mac_scsi.h
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
mac53c94.c
|
Remove all #inclusions of asm/system.h
|
2012-03-28 18:30:03 +01:00 |
|
mac53c94.h
|
|
|
|
Makefile
|
[SCSI] mpt3sas: add new driver supporting 12GB SAS
|
2012-12-01 10:09:17 +00:00 |
|
megaraid.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
megaraid.h
|
megaraid: Don't use create_proc_read_entry()
|
2013-04-29 15:41:57 -04:00 |
|
mesh.c
|
Remove all #inclusions of asm/system.h
|
2012-03-28 18:30:03 +01:00 |
|
mesh.h
|
|
|
|
mvme16x_scsi.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
mvme147.c
|
switch wd33c93 to ->show_info()
|
2013-04-09 14:13:15 -04:00 |
|
mvme147.h
|
|
|
|
mvumi.c
|
[SCSI] mvumi: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b
|
2013-04-15 14:30:44 -06:00 |
|
mvumi.h
|
[SCSI] mvumi: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b
|
2013-04-15 14:30:44 -06:00 |
|
NCR_D700.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
NCR_D700.h
|
|
|
|
NCR_Q720.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
NCR_Q720.h
|
|
|
|
ncr53c8xx.c
|
Remove all #inclusions of asm/system.h
|
2012-03-28 18:30:03 +01:00 |
|
ncr53c8xx.h
|
|
|
|
NCR53c406a.c
|
|
|
|
NCR5380.c
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
NCR5380.h
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
nsp32_debug.c
|
|
|
|
nsp32_io.h
|
|
|
|
nsp32.c
|
SCSI: nsp32: use mdelay instead of large udelay constants
|
2013-08-14 22:59:10 -07:00 |
|
nsp32.h
|
|
|
|
osst_detect.h
|
|
|
|
osst_options.h
|
|
|
|
osst.c
|
Remove all #inclusions of asm/system.h
|
2012-03-28 18:30:03 +01:00 |
|
osst.h
|
|
|
|
pas16.c
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
pas16.h
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
pmcraid.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
pmcraid.h
|
scsi: Fix typo in pmcraid.h
|
2012-02-21 11:40:37 +01:00 |
|
ppa.c
|
ppa: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
ppa.h
|
|
|
|
ps3rom.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
qla1280.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
qla1280.h
|
|
|
|
qlogicfas.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
qlogicfas408.c
|
|
|
|
qlogicfas408.h
|
|
|
|
qlogicpti.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
qlogicpti.h
|
|
|
|
raid_class.c
|
|
|
|
script_asm.pl
|
|
|
|
scsi_debug.c
|
Merge branch 'misc' into for-linus
|
2013-05-10 07:53:40 -07:00 |
|
scsi_devinfo.c
|
[SCSI] Disable DIF on Hitachi Ultrastar 15K300
|
2012-09-24 12:11:00 +04:00 |
|
scsi_error.c
|
[SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd
|
2013-05-10 07:47:44 -07:00 |
|
scsi_ioctl.c
|
|
|
|
scsi_lib_dma.c
|
scsi: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required
|
2011-10-31 19:31:23 -04:00 |
|
scsi_lib.c
|
Fix uses of dma_max_pfn() when converting to a limiting address
|
2014-03-07 20:11:26 +08:00 |
|
scsi_logging.h
|
|
|
|
scsi_module.c
|
|
|
|
scsi_netlink.c
|
scsi: replace obsolete NLMSG_* with type safe nlmsg_*
|
2013-03-28 14:27:24 -04:00 |
|
scsi_pm.c
|
PM / Runtime: Rework the "runtime idle" helper routine
|
2014-03-07 12:52:24 +08:00 |
|
scsi_priv.h
|
[SCSI] async: introduce 'async_domain' type
|
2012-07-20 09:05:54 +01:00 |
|
scsi_proc.c
|
fix buffer leak after "scsi: saner replacements for ->proc_info()"
|
2013-05-31 15:16:51 -04:00 |
|
scsi_sas_internal.h
|
|
|
|
scsi_scan.c
|
Merge SCSI misc branch into isci-for-3.6 tag
|
2012-10-02 08:55:12 +01:00 |
|
scsi_sysctl.c
|
|
|
|
scsi_sysfs.c
|
[SCSI] prevent stack buffer overflow in host_reset
|
2012-11-30 09:08:16 +00:00 |
|
scsi_tgt_if.c
|
scsi: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required
|
2011-10-31 19:31:23 -04:00 |
|
scsi_tgt_lib.c
|
|
|
|
scsi_tgt_priv.h
|
|
|
|
scsi_trace.c
|
|
|
|
scsi_transport_api.h
|
|
|
|
scsi_transport_fc_internal.h
|
|
|
|
scsi_transport_fc.c
|
scsi: replace obsolete NLMSG_* with type safe nlmsg_*
|
2013-03-28 14:27:24 -04:00 |
|
scsi_transport_iscsi.c
|
[SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used
|
2013-05-10 07:47:53 -07:00 |
|
scsi_transport_sas.c
|
[SCSI] scsi_transport_sas: add 12GB definitions for mpt3sas
|
2012-12-01 10:08:41 +00:00 |
|
scsi_transport_spi.c
|
[SCSI] scsi_transport_spi: fix for unbalanced reference counting
|
2012-05-10 09:06:12 +01:00 |
|
scsi_transport_srp_internal.h
|
|
|
|
scsi_transport_srp.c
|
IB/srp: Allow SRP disconnect through sysfs
|
2012-11-30 17:40:33 -08:00 |
|
scsi_typedefs.h
|
|
|
|
scsi.c
|
SCSI: Don't attempt to send extended INQUIRY command if skip_vpd_pages is set
|
2013-08-14 22:59:04 -07:00 |
|
scsi.h
|
|
|
|
scsicam.c
|
fs: move code out of buffer.c
|
2012-01-03 22:54:07 -05:00 |
|
sd_dif.c
|
[SCSI] sd_dif: problem with verify of type 1 protection information (PI)
|
2013-05-02 15:37:03 -07:00 |
|
sd.c
|
SCSI: sd: Reduce buffer size for vpd request
|
2014-01-15 15:28:53 -08:00 |
|
sd.h
|
SCSI: sd: Update WRITE SAME heuristics
|
2013-07-25 14:07:30 -07:00 |
|
ses.c
|
[SCSI] ses: requesting a fault indication
|
2011-06-29 12:14:25 -05:00 |
|
sg.c
|
aio: don't include aio.h in sched.h
|
2013-05-07 20:16:25 -07:00 |
|
sgiwd93.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
sim710.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
sni_53c710.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
sr_ioctl.c
|
scsi: Fix up files implicitly depending on module.h inclusion
|
2011-10-31 19:31:24 -04:00 |
|
sr_vendor.c
|
|
|
|
sr.c
|
block_device_operations->release() should return void
|
2013-05-07 02:16:21 -04:00 |
|
sr.h
|
[SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise
|
2011-07-21 14:15:58 -07:00 |
|
st_options.h
|
|
|
|
st.c
|
[SCSI] st: Take additional queue ref in st_probe
|
2013-04-06 11:14:20 +01:00 |
|
st.h
|
[SCSI] st: raise device limit
|
2012-09-14 17:59:29 +01:00 |
|
stex.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
storvsc_drv.c
|
SCSI: Disable WRITE SAME for RAID and virtual host adapter drivers
|
2013-12-11 22:36:28 -08:00 |
|
sun_esp.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
sun3_NCR5380.c
|
sun3_scsi: add ->show_info()
|
2013-05-04 14:50:16 -04:00 |
|
sun3_scsi_vme.c
|
Remove all #inclusions of asm/system.h
|
2012-03-28 18:30:03 +01:00 |
|
sun3_scsi.c
|
sun3_scsi: add ->show_info()
|
2013-05-04 14:50:16 -04:00 |
|
sun3_scsi.h
|
sun3_scsi: add ->show_info()
|
2013-05-04 14:50:16 -04:00 |
|
sun3x_esp.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
sym53c416.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
sym53c416.h
|
|
|
|
t128.c
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
t128.h
|
NCR5830: switch to ->show_info()
|
2013-04-09 14:13:17 -04:00 |
|
tmscsim.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
tmscsim.h
|
|
|
|
u14-34f.c
|
Remove all #inclusions of asm/system.h
|
2012-03-28 18:30:03 +01:00 |
|
ultrastor.c
|
Remove all #inclusions of asm/system.h
|
2012-03-28 18:30:03 +01:00 |
|
ultrastor.h
|
|
|
|
virtio_scsi.c
|
virtio-scsi: Fix hotcpu_notifier use-after-free with virtscsi_freeze
|
2014-02-06 11:08:17 -08:00 |
|
vmw_pvscsi.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
vmw_pvscsi.h
|
[SCSI] vmw_pvscsi: Try setting host->max_id as suggested by the device.
|
2012-03-27 08:26:36 +01:00 |
|
wd33c93.c
|
switch wd33c93 to ->show_info()
|
2013-04-09 14:13:15 -04:00 |
|
wd33c93.h
|
switch wd33c93 to ->show_info()
|
2013-04-09 14:13:15 -04:00 |
|
wd7000.c
|
wd7000: switch to ->show_info()
|
2013-04-09 14:13:15 -04:00 |
|
zalon.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |
|
zorro7xx.c
|
Drivers: scsi: remove __dev* attributes.
|
2013-01-03 15:57:01 -08:00 |