mirror of
https://github.com/torvalds/linux.git
synced 2026-06-13 01:08:08 +02:00
05099c58ea
1. Delete unused files 2. Add PCIe udma transfer support 3. Use default Max Payload size setting(128 Bytes) It's safe to use default Max Payload size setting to support most devices Change-Id: I68b60192a90962e03fe52b907a17234e8567e4b4 Signed-off-by: Simon Xue <xxm@rock-chips.com>
52 lines
2.2 KiB
Makefile
52 lines
2.2 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
obj-$(CONFIG_PCIE_CADENCE) += pcie-cadence.o
|
|
obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o
|
|
obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep.o
|
|
obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
|
|
obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
|
|
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
|
|
obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
|
|
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
|
|
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
|
|
obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o
|
|
obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
|
|
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
|
|
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
|
|
obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
|
|
obj-$(CONFIG_PCI_V3_SEMI) += pci-v3-semi.o
|
|
obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
|
|
obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
|
|
obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
|
|
obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
|
|
obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
|
|
obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
|
|
obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
|
|
obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
|
|
obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
|
|
obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
|
|
obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
|
|
obj-$(CONFIG_ROCKCHIP_PCIE_DMA_OBJ) += rockchip-pcie-dma.o
|
|
obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
|
|
obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
|
|
obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
|
|
obj-$(CONFIG_VMD) += vmd.o
|
|
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
|
|
obj-y += dwc/
|
|
|
|
|
|
# The following drivers are for devices that use the generic ACPI
|
|
# pci_root.c driver but don't support standard ECAM config access.
|
|
# They contain MCFG quirks to replace the generic ECAM accessors with
|
|
# device-specific ones that are shared with the DT driver.
|
|
|
|
# The ACPI driver is generic and should not require driver-specific
|
|
# config options to be enabled, so we always build these drivers on
|
|
# ARM64 and use internal ifdefs to only build the pieces we need
|
|
# depending on whether ACPI, the DT driver, or both are enabled.
|
|
|
|
ifdef CONFIG_PCI
|
|
obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
|
|
obj-$(CONFIG_ARM64) += pci-thunder-pem.o
|
|
obj-$(CONFIG_ARM64) += pci-xgene.o
|
|
endif
|