mirror of
https://github.com/torvalds/linux.git
synced 2026-08-01 03:59:40 +02:00
Linux kernel source tree
b9274abe98
says: ==================== net: phy: bcm54811: PHY initialization Proper bcm54811 PHY driver initialization for MII-Lite. The bcm54811 PHY in MLP package must be setup for MII-Lite interface mode by software. Normally, the PHY to MAC interface is selected in hardware by setting the bootstrap pins of the PHY. However, MII and MII-Lite share the same hardware setup and must be distinguished by software, setting appropriate bit in a configuration register. The MII-Lite interface mode is non-standard one, defined by Broadcom for some of their PHYs. The MII-Lite lightness consist in omitting RXER, TXER, CRS and COL signals of the standard MII interface. Absence of COL them makes half-duplex links modes impossible but does not interfere with Broadcom's BroadR-Reach link modes, because they are full-duplex only. To do it in a clean way, MII-Lite must be introduced first, including its limitation to link modes (no half-duplex), because it is a prerequisite for the patch #3 of this series. The patch #4 does not depend on MII-Lite directly but both #3 and #4 are necessary for bcm54811 to work properly without additional configuration steps to be done - for example in the bootloader, before the kernel starts. PATCH 1 - Add MII-Lite PHY interface mode as defined by Broadcom for their two-wire PHYs. It can be used with most Ethernet controllers under certain limitations (no half-duplex link modes etc.). PATCH 2 - Add MII-Lite PHY interface type PATCH 3 - Activation of MII-Lite interface mode on Broadcom bcm5481x PHYs PATCH 4 - Initialize the BCM54811 PHY properly so that it conforms to the datasheet regarding a reserved bit in the LRE Control register, which must be written to zero after every device reset. Ignore the LDS capability bit in LRE Status register on bcm54811. ==================== Link: https://patch.msgid.link/20250708090140.61355-1-kamilh@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .clippy.toml | ||
| .cocciconfig | ||
| .editorconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .pylintrc | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.