mirror of
https://github.com/torvalds/linux.git
synced 2026-07-28 10:09:10 +02:00
Linux kernel source tree
b731bc5f49
- The rework that uncoupled physical and virtual address spaces inadvertently prevented KASAN shadow mappings from using large pages. Restore large page mappings for KASAN shadows - Add decompressor routine physmem_alloc() that may fail, unlike physmem_alloc_or_die(). This allows callers to implement fallback paths - Allow falling back from large pages to smaller pages (1MB or 4KB) if the allocation of 2GB pages in the decompressor can not be fulfilled - Add to the decompressor boot print support of "%%" format string, width and padding hadnling, length modifiers and decimal conversion specifiers - Add to the decompressor message severity levels similar to kernel ones. Support command-line options that control console output verbosity - Replaces boot_printk() calls with appropriate loglevel- specific helpers such as boot_emerg(), boot_warn(), and boot_debug(). - Collect all boot messages into a ring buffer independent of the current log level. This is particularly useful for early crash analysis - If 'earlyprintk' command line parameter is not specified, store decompressor boot messages in a ring buffer to be printed later by the kernel, once the console driver is registered - Add 'bootdebug' command line parameter to enable printing of decompressor debug messages when needed. That parameters allows message supressing and filtering - Dump boot messages on a decompressor crash, but only if 'bootdebug' command line parameter is enabled - When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages in the same format as regular printk() - Dump physical memory tracking information on boot: online ranges, reserved areas and vmem allocations - Dump virtual memory layout and randomization details - Improve decompression error reporting and dump the message ring buffer in case the boot failed and system halted - Add an exception handler which handles exceptions when FPU control register is attempted to be set to an invalid value. Remove '.fixup' section as result of this change - Use 'A', 'O', and 'R' inline assembly format flags, which allows recent Clang compilers to generate better FPU code - Rework uaccess code so it reads better and generates more efficient code - Cleanup futex inline assembly code - Disable KMSAN instrumention for futex inline assemblies, which contain dereferenced user pointers. Otherwise, shadows for the user pointers would be accessed - PFs which are not initially configured but in standby create only a single-function PCI domain. If they are configured later on, sibling PFs and their child VFs will not be added to their PCI domain breaking SR-IOV expectations. Fix that by allowing initially configured but in standby PFs create multi-function PCI domains - Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid compile errors caused by kernel's own definitions of 'bool', 'false', and 'true' conflicting with the C23 reserved keywords - Fix sclp subsystem failure when a sclp console is not present - Fix misuse of non-NULL terminated strings in vmlogrdr driver - Various other small improvements, cleanups and fixes -----BEGIN PGP SIGNATURE----- iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZ5t0jhccYWdvcmRlZXZA bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8A4wAP91BcHtV4OTmoMsG4JTwiy9wTzI zro9IrBSCLPLED7kfQEAzjEspd5gWMFDnIM/KxXmCNHA/nBTXVh/1F+b1F0z+Q8= =JfEG -----END PGP SIGNATURE----- Merge tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Alexander Gordeev: - The rework that uncoupled physical and virtual address spaces inadvertently prevented KASAN shadow mappings from using large pages. Restore large page mappings for KASAN shadows - Add decompressor routine physmem_alloc() that may fail, unlike physmem_alloc_or_die(). This allows callers to implement fallback paths - Allow falling back from large pages to smaller pages (1MB or 4KB) if the allocation of 2GB pages in the decompressor can not be fulfilled - Add to the decompressor boot print support of "%%" format string, width and padding hadnling, length modifiers and decimal conversion specifiers - Add to the decompressor message severity levels similar to kernel ones. Support command-line options that control console output verbosity - Replaces boot_printk() calls with appropriate loglevel- specific helpers such as boot_emerg(), boot_warn(), and boot_debug(). - Collect all boot messages into a ring buffer independent of the current log level. This is particularly useful for early crash analysis - If 'earlyprintk' command line parameter is not specified, store decompressor boot messages in a ring buffer to be printed later by the kernel, once the console driver is registered - Add 'bootdebug' command line parameter to enable printing of decompressor debug messages when needed. That parameters allows message suppressing and filtering - Dump boot messages on a decompressor crash, but only if 'bootdebug' command line parameter is enabled - When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages in the same format as regular printk() - Dump physical memory tracking information on boot: online ranges, reserved areas and vmem allocations - Dump virtual memory layout and randomization details - Improve decompression error reporting and dump the message ring buffer in case the boot failed and system halted - Add an exception handler which handles exceptions when FPU control register is attempted to be set to an invalid value. Remove '.fixup' section as result of this change - Use 'A', 'O', and 'R' inline assembly format flags, which allows recent Clang compilers to generate better FPU code - Rework uaccess code so it reads better and generates more efficient code - Cleanup futex inline assembly code - Disable KMSAN instrumention for futex inline assemblies, which contain dereferenced user pointers. Otherwise, shadows for the user pointers would be accessed - PFs which are not initially configured but in standby create only a single-function PCI domain. If they are configured later on, sibling PFs and their child VFs will not be added to their PCI domain breaking SR-IOV expectations. Fix that by allowing initially configured but in standby PFs create multi-function PCI domains - Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid compile errors caused by kernel's own definitions of 'bool', 'false', and 'true' conflicting with the C23 reserved keywords - Fix sclp subsystem failure when a sclp console is not present - Fix misuse of non-NULL terminated strings in vmlogrdr driver - Various other small improvements, cleanups and fixes * tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits) s390/vmlogrdr: Use array instead of string initializer s390/vmlogrdr: Use internal_name for error messages s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init() s390/tools: Use array instead of string initializer s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init() s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS s390/bitops: Use correct constraint for arch_test_bit() inline assembly s390/pci: Fix SR-IOV for PFs initially in standby s390/futex: Avoid KMSAN instrumention for user pointers s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline s390/futex: Cleanup futex_atomic_cmpxchg_inatomic() s390/futex: Generate futex atomic op functions s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER s390/uaccess: Use asm goto for put_user()/get_user() s390/uaccess: Remove usage of the oac specifier s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers s390/uaccess: Move put_user() / __put_user() close to put_user() asm code s390/uaccess: Use asm goto for __mvc_kernel_nofault() ... |
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .clippy.toml | ||
| .cocciconfig | ||
| .editorconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.