mirror of
https://github.com/torvalds/linux.git
synced 2026-06-05 13:06:59 +02:00
0a5ef95923
Currently, the time it took a PCI device to become ready after reset is
only printed if it was longer than 1000ms ('PCI_RESET_WAIT'). However,
for debugging purposes it is useful to know this time even if it was
shorter. For example, with the device I am working on, hardware
engineers asked to verify that it becomes ready on the first try (no
delay).
To that end, add a debug level print that can be enabled using dynamic
debug. Example:
# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
# dmesg -c | grep ready
# echo "file drivers/pci/pci.c +p" > /sys/kernel/debug/dynamic_debug/control
# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
# dmesg -c | grep ready
[ 396.060335] mlxsw_spectrum4 0000:01:00.0: ready 0ms after bus reset
# echo "file drivers/pci/pci.c -p" > /sys/kernel/debug/dynamic_debug/control
# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
# dmesg -c | grep ready
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|---|---|---|
| .. | ||
| controller | ||
| endpoint | ||
| hotplug | ||
| msi | ||
| pcie | ||
| switch | ||
| access.c | ||
| ats.c | ||
| bus.c | ||
| doe.c | ||
| ecam.c | ||
| host-bridge.c | ||
| iov.c | ||
| irq.c | ||
| Kconfig | ||
| Makefile | ||
| mmap.c | ||
| of_property.c | ||
| of.c | ||
| p2pdma.c | ||
| pci-acpi.c | ||
| pci-bridge-emul.c | ||
| pci-bridge-emul.h | ||
| pci-driver.c | ||
| pci-label.c | ||
| pci-mid.c | ||
| pci-pf-stub.c | ||
| pci-stub.c | ||
| pci-sysfs.c | ||
| pci.c | ||
| pci.h | ||
| probe.c | ||
| proc.c | ||
| quirks.c | ||
| remove.c | ||
| rom.c | ||
| search.c | ||
| setup-bus.c | ||
| setup-irq.c | ||
| setup-res.c | ||
| slot.c | ||
| syscall.c | ||
| vc.c | ||
| vgaarb.c | ||
| vpd.c | ||
| xen-pcifront.c | ||