Linux kernel source tree
Go to file
Badhri Jagan Sridharan af4cedd719 FROMGIT: usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling
When vbus auto discharge is enabled, TCPM can sometimes be faster than
the TCPC i.e. TCPM can go ahead and move the port to unattached state
(involves disabling vbus auto discharge) before TCPC could effectively
discharge vbus to VSAFE0V. This leaves vbus with residual charge and
increases the decay time which prevents tsafe0v from being met.
This change makes TCPM waits for a maximum of tSafe0V(max) for vbus
to discharge to VSAFE0V before transitioning to unattached state
and re-enable toggling. If vbus discharges to vsafe0v sooner, then,
transition to unattached state
happens right away.

Also, while in SNK_READY, when auto discharge is enabled, drive
disconnect based on vbus turning off instead of Rp disappearing on
CC pins. Rp disappearing on CC pins is almost instanteous compared
to vbus decay.

Sink detach:
[  541.703058] CC1: 3 -> 0, CC2: 0 -> 0 [state SNK_READY, polarity 0, disconnected]
[  541.703331] Setting voltage/current limit 5000 mV 0 mA
[  541.727235] VBUS on
[  541.749650] VBUS off
[  541.749653] pending state change SNK_READY -> SNK_UNATTACHED @ 650 ms [rev3 NONE_AMS]
[  541.749944] VBUS VSAFE0V
[  541.749945] state change SNK_READY -> SNK_UNATTACHED [rev3 NONE_AMS]
[  541.750806] Disable vbus discharge ret:0
[  541.907345] Start toggling
[  541.922799] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]

Source detach:
[ 2555.310414] state change SRC_SEND_CAPABILITIES -> SRC_READY [rev3 POWER_NEGOTIATION]
[ 2555.310675] AMS POWER_NEGOTIATION finished
[ 2555.310679] cc:=3
[ 2593.645886] CC1: 0 -> 0, CC2: 2 -> 0 [state SRC_READY, polarity 1, disconnected]
[ 2593.645919] pending state change SRC_READY -> SNK_UNATTACHED @ 650 ms [rev3 NONE_AMS]
[ 2593.648419] VBUS off
[ 2593.648960] VBUS VSAFE0V
[ 2593.648965] state change SRC_READY -> SNK_UNATTACHED [rev3 NONE_AMS]
[ 2593.649962] Disable vbus discharge ret:0
[ 2593.890322] Start toggling
[ 2593.925663] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0,

Fixes: f321a02cae ("usb: typec: tcpm: Implement enabling Auto Discharge disconnect support")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20210225101104.1680697-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit ff04213171cf329d6a3e0d844e4a6672c84d0398
 https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-next)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I688ea245671a8d1b4bd52d5c04fce73a75b8a535
2021-03-02 08:24:53 +01:00
android ANDROID: GKI: Update abi_gki_aarch64_qcom for zram and zsmalloc 2021-03-01 19:48:30 +00:00
arch ANDROID: GKI: defconfig: disable CONFIG_ION 2021-03-01 23:02:14 +00:00
block UPSTREAM: block/keyslot-manager: introduce devm_blk_ksm_init() 2021-02-23 08:10:56 +01:00
certs .gitignore: add SPDX License Identifier 2020-03-25 11:50:48 +01:00
crypto UPSTREAM: crypto: blake2b - update file comment 2021-02-23 08:06:20 +01:00
Documentation Merge remote-tracking branch 'aosp/upstream-f2fs-stable-linux-5.10.y' into android12-5.10 2021-03-01 19:06:56 -08:00
drivers FROMGIT: usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling 2021-03-02 08:24:53 +01:00
fs Merge remote-tracking branch 'aosp/upstream-f2fs-stable-linux-5.10.y' into android12-5.10 2021-03-01 19:06:56 -08:00
include Merge remote-tracking branch 'aosp/upstream-f2fs-stable-linux-5.10.y' into android12-5.10 2021-03-01 19:06:56 -08:00
init ANDROID: modules: introduce the MODULE_SCMVERSION config 2021-02-23 16:42:21 -08:00
ipc ipc: adjust proc_ipc_sem_dointvec definition to match prototype 2020-09-05 12:14:29 -07:00
kernel ANDROID: sched/rt: Only enable RT sync for SMP targets 2021-03-01 18:50:27 +00:00
lib UPSTREAM: lib/vsprintf: no_hash_pointers prints all addresses as unhashed 2021-02-25 21:37:05 +00:00
LICENSES LICENSES/deprecated: add Zlib license text 2020-09-16 14:33:49 +02:00
mm UPSTREAM: kfence: report sensitive information based on no_hash_pointers 2021-03-01 18:11:05 +01:00
net This is the 5.10.19 stable release 2021-02-26 10:21:27 +01:00
samples samples/bpf: Fix possible hang in xdpsock with multiple threads 2020-12-30 11:53:49 +01:00
scripts This is the 5.10.19 stable release 2021-02-26 10:21:27 +01:00
security Merge 5.10.17 into android12-5.10 2021-02-18 11:21:01 +01:00
sound BACKPORT: UPSTREAM: amba: Make the remove callback return void 2021-03-01 12:52:06 -08:00
tools ANDROID: Incremental fs: Build merkle tree when enabling verity 2021-03-01 16:16:01 +00:00
usr Merge branch 'work.fdpic' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2020-08-07 13:29:39 -07:00
virt KVM: Use kvm_pfn_t for local PFN variable in hva_to_pfn_remapped() 2021-02-26 10:13:01 +01:00
.clang-format RDMA 5.10 pull request 2020-10-17 11:18:18 -07:00
.cocciconfig
.get_maintainer.ignore
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore FROMLIST: kbuild: lto: fix module versioning 2020-12-16 08:56:32 -08:00
.mailmap mailmap: add two more addresses of Uwe Kleine-König 2020-12-06 10:19:07 -08:00
build.config.aarch64 ANDROID: enable LLVM_IAS=1 for clang's integrated assembler for aarch64 2020-11-10 12:14:17 -08:00
build.config.allmodconfig ANDROID: Disable dynamic ftrace for allmodconfig builds 2020-12-16 08:56:36 -08:00
build.config.allmodconfig.aarch64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.allmodconfig.arm ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.allmodconfig.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.amlogic ANDROID: GKI: amlogic: add DTB overlays 2021-02-12 10:08:04 +01:00
build.config.arm ANDROID: ARM: Use zImage instead of Image 2020-11-13 15:56:44 +00:00
build.config.common ANDROID: clang: update to 12.0.1 2021-01-26 04:19:57 +00:00
build.config.db845c ANDROID: db845c: Use FRAGMENT_CONFIG 2021-02-10 06:08:17 +00:00
build.config.gki ANDROID: gki: Removed cf modules from gki_defconfig 2020-02-01 00:27:50 +00:00
build.config.gki_kasan ANDROID: build_config: drop CONFIG_KASAN_PANIC_ON_WARN 2021-02-15 19:08:31 +01:00
build.config.gki_kasan.aarch64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.gki_kasan.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.gki-debug.aarch64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.gki-debug.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.gki.aarch64 ANDROID: Add hikey960 build infrastructure file 2021-02-18 23:59:34 +00:00
build.config.gki.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.hikey960 ANDROID: Add hikey960 build infrastructure file 2021-02-18 23:59:34 +00:00
build.config.x86_64 ANDROID: x86: Add objtool to MAKE_GOALS 2021-01-28 22:19:23 +00:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: Move Jason Cooper to CREDITS 2020-11-30 10:20:34 +01:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS UPSTREAM: HID: playstation: initial DualSense USB support. 2021-02-25 19:28:20 +00:00
Makefile This is the 5.10.19 stable release 2021-02-26 10:21:27 +01:00
README
README.md ANDROID: README: Add requirement for "Bug:" tag for FROMLIST 2020-05-01 15:36:12 -07:00

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)