Tushar Dave 5a4cebe94b e1000e: NIC goes up and immediately goes down ... commit b7ec70be01 upstream. Found that commit d478eb44 was a bad commit. If the link partner is transmitting codeword (even if NULL codeword), then the RXCW.C bit will be set so check for RXCW.CW is unnecessary. Ref: RH BZ 840642 Reported-by: Fabio Futigami <ffutigam@redhat.com> Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> CC: Marcelo Ricardo Leitner <mleitner@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2012-08-15 12:04:30 -07:00
..
82571.c	e1000e: NIC goes up and immediately goes down	2012-08-15 12:04:30 -07:00
defines.h	e1000e: disable jumbo frames on 82579 when MACsec enabled in EEPROM	2011-03-11 02:23:21 -08:00
e1000.h	e1000e: Avoid wrong check on TX hang	2012-04-02 09:27:18 -07:00
es2lan.c	e1000e: implement ethtool set_phys_id	2011-04-27 02:05:53 -07:00
ethtool.c	net/igb/e1000/e1000e: more robust ethtool duplex/speed configuration	2011-04-29 14:03:03 -07:00
hw.h	e1000e: implement ethtool set_phys_id	2011-04-27 02:05:53 -07:00
ich8lan.c	e1000e: workaround for packet drop on 82579 at 100Mbps	2011-10-16 14:14:55 -07:00
lib.c	e1000e: alternate MAC address does not work on device id 0x1060	2011-08-15 18:31:42 -07:00
Makefile	e1000e: update Copyright for 2011	2011-01-14 02:04:01 -08:00
netdev.c	e1000e: Avoid wrong check on TX hang	2012-04-02 09:27:18 -07:00
param.c	e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs	2011-01-14 02:06:23 -08:00
phy.c	e1000e: convert short duration msleep() to usleep_range()	2011-04-13 19:17:06 -07:00