Linux kernel source tree
Go to file
Robert Hancock 9e2bc267e7 net: axienet: Use NAPI for TX completion path
This driver was using the TX IRQ handler to perform all TX completion
tasks. Under heavy TX network load, this can cause significant irqs-off
latencies (found to be in the hundreds of microseconds using ftrace).
This can cause other issues, such as overrunning serial UART FIFOs when
using high baud rates with limited UART FIFO sizes.

Switch to using a NAPI poll handler to perform the TX completion work
to get this out of hard IRQ context and avoid the IRQ latency impact.
A separate poll handler is used for TX and RX since they have separate
IRQs on this controller, so that the completion work for each of them
stays on the same CPU as the interrupt.

Testing on a Xilinx MPSoC ZU9EG platform using iperf3 from a Linux PC
through a switch at 1G link speed showed no significant change in TX or
RX throughput, with approximately 941 Mbps before and after. Hard IRQ
time in the TX throughput test was significantly reduced from 12% to
below 1% on the CPU handling TX interrupts, with total hard+soft IRQ CPU
usage dropping from about 56% down to 48%.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13 12:22:11 +01:00
arch Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-05-12 16:15:30 -07:00
block Revert "block: release rq qos structures for queue without disk" 2022-05-02 10:06:40 -06:00
certs Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
crypto for-5.18/64bit-pi-2022-03-25 2022-03-26 12:01:35 -07:00
Documentation Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-05-12 16:15:30 -07:00
drivers net: axienet: Use NAPI for TX completion path 2022-05-13 12:22:11 +01:00
fs Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-05-12 16:15:30 -07:00
include inet: add READ_ONCE(sk->sk_bound_dev_if) in INET_MATCH() 2022-05-13 12:17:25 +01:00
init Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
ipc fs: allocate inode by using alloc_inode_sb() 2022-03-22 15:57:03 -07:00
kernel Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-05-12 16:15:30 -07:00
lib Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-05-12 16:15:30 -07:00
LICENSES LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers 2021-12-16 14:33:10 +01:00
mm mm/readahead: Fix readahead with large folios 2022-05-05 00:47:29 -04:00
net inet: add READ_ONCE(sk->sk_bound_dev_if) in INET_MATCH() 2022-05-13 12:17:25 +01:00
samples samples/bpf: Reduce the sampling interval in xdp1_user 2022-04-20 14:58:29 -07:00
scripts objtool: Enable unreachable warnings for CLANG LTO 2022-04-19 21:58:48 +02:00
security hardening updates for v5.18-rc1-fix1 2022-03-31 11:43:01 -07:00
sound ASoC: Fixes for v5.18 2022-05-08 10:49:25 +02:00
tools selftests: fib_nexthops: Make the test more robust 2022-05-13 11:59:32 +01:00
usr Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
virt Merge branch 'kvm-fixes-for-5.18-rc5' into HEAD 2022-04-29 12:39:34 -04:00
.clang-format genirq/msi: Make interrupt allocation less convoluted 2021-12-16 22:22:20 +01:00
.cocciconfig
.get_maintainer.ignore
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore .gitignore: ignore only top-level modules.builtin 2021-05-02 00:43:35 +09:00
.mailmap Networking fixes for 5.18-rc7, including fixes from wireless, 2022-05-12 11:51:45 -07:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: replace a Microchip AT91 maintainer 2022-02-09 11:30:01 +01:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-05-12 16:15:30 -07:00
Makefile Linux 5.18-rc6 2022-05-08 13:54:17 -07:00
README

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.