mirror of
https://github.com/torvalds/linux.git
synced 2026-07-31 03:27:03 +02:00
Linux kernel source tree
9c13e8d0c2
Thomas Petazzoni says: ==================== net: mvpp2: add initial support for PPv2.2 The goal of this patch series is to add basic support for PPv2.2 in the existing mvpp2 driver. mvpp2 currently supported the PPv2.1 version of the IP, used in the 32 bits Marvell Armada 375 SoC. PPv2.2 is an evolution of this IP block, used in the 64 bits Marvell Armada 7K/8K SoCs. In order to ease the review, the introduction of PPv2.2 support has been made into multiple small commits, with the final commit adding the compatible string that makes the PPv2.2 support actually usable. The series remain fully bisectable. People interested in testing the code will find the full series (plus a few Device Tree patches) at: https://github.com/MISL-EBU-System-SW/mainline-public/tree/4.11/mvpp2.2-support-v3 I'd like to thank Stefan Chulski and Marcin Wojtas, who helped me a lot in the development of this patch series, by reviewing the patches, and giving lots of useful hints to debug the driver on PPv2.2. Thanks as well to Russell King for reviewing previous iterations of this series, and providing suggestions and fixes. Changes between v2 and v3: - Rebased on v4.11-rc1. - Add patch "net: mvpp2: fix DMA address calculation in mvpp2_txq_inc_put()", to properly take into account the "packet offset" field of the TX descriptors. Without this, we were getting DMA_API_DEBUG warnings that we are unmapping DMA mappings with a non-mapped DMA address. - In patch "net: mvpp2: add and use accessors for TX/RX descriptors", add a function named mvpp2_txdesc_offset_get(), which is needed for the DMA address calculation fix. - In patch "net: mvpp2: add and use accessors for TX/RX descriptors", fix the calculation of tx_desc physical address and packet offset in mvpp2_tx_frag_process(). The offset was assigned into the buffer physical address, and the physical address to the packet offset, which meant the fragment process was completely broken. - In patch "net: mvpp2: adjust the allocation/free of BM pools for PPv2.2" fix how MVPP22_BM_ADDR_HIGH_VIRT_RLS_MASK is used. This mask is already shifted. So the value should be shifted before being masked and not the opposite. - Add a new patch "net: mvpp2: set dma mask and coherent dma mask on PPv2.2", to set the DMA mask and DMA coherent mask. By setting the DMA mask to 40 bits we avoid using bounce buffers when network packets are above the 4 GB limit. The coherent mask remains set to 32 bits, because the BM pools must all have the same high 32 bits in their addresses. - Use "dma" instead of "phys" where appropriate, as suggested by Russell King. - Use the "cookie" field of the RX descriptor to store the physical address instead of the virtual address, and then use phys_to_virt() to get the virtual address. This allows to work around the limit that the "cookie" field only has 40 bits, which is not sufficient to store a virtual address on 64 bits platforms. This was suggested by Russell King. As part of this change, also got rid of all the compile time conditionals on CONFIG_ARCH_DMA_ADDR_T_64BIT, to get better compile-time coverage. - In patch "net: mvpp2: handle misc PPv2.1/PPv2.2 differences": * Instead of calling mvpp21_port_power_up(port) only on PPv2.1, remove this function, and call its relevant parts directly from ->probe(). Only mvpp2_port_fc_adv_enable() is PPv2.1 specific. Reported by Russell King. * Add a mvpp22_port_mii_set() function that properly initializes SGMII support on PPv2.2. Code provided by Russell King. - In patch "net: mvpp2: handle register mapping and access for PPv2.2": * Adjust the code to match the change of the DT binding in terms of mapping the second register area on PPv2.2. * Rework the register accessors to remove the get_cpu()/put_cpu(), and instead use separate accessors for global registers vs. per-CPU registers. - Add a few new patches removing dead/unused/useless code: net: mvpp2: remove support for buffer header net: mvpp2: remove unused register definition MVPP2_TXQ_THRESH_REG net: mvpp2: remove mvpp2_txq_pend_desc_num_get() function - Fix a number of checkpatch warnings. Changes between v1 and v2: - Made a separate series from the set of patches doing preparation changes/fixes to the mvpp2 driver. - Rebased on top of v4.10-rc1. - Update Kconfig text of the mvpp2 driver to mention the support for Armada 7K and 8K (PPv2.2). ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| firmware | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel ============ This file was moved to Documentation/admin-guide/README.rst Please notice that there are several guides for kernel developers and users. These guides can be rendered in a number of formats, like HTML and PDF. In order to build the documentation, use ``make htmldocs`` or ``make pdfdocs``. There are various text files in the Documentation/ subdirectory, several of them using the Restructured Text markup notation. See Documentation/00-INDEX for a list of what is contained in each file. Please read the Documentation/process/changes.rst file, as it contains the requirements for building and running the kernel, and information about the problems which may result by upgrading your kernel.