mirror of
https://github.com/torvalds/linux.git
synced 2026-11-14 14:17:12 +01:00
98e7dcbb82
SRCU
----
_ Properly handle SRCU readers within IRQ disabled sections in tiny SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture.
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write side
(using full RCU grace period ordering instead of simply full
ordering) as compared to "traditional" non-fast SRCU. But those
srcu-fast flavours are going to be optimized in two different
ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next cycle.
Only the new interfaces are added for now, along with related
torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering) without
waiting for the read side to tell which to use. Also this optimizes
the read side altogether with moving flavour debug checks under debug
config and with removing a costly RmW operation on their first call.
- Make some diagnostic functions tracing safe.
REFSCALE
-------
Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code.
MISCELLANOUS
------
- In order to prepare the layout for nohz_full work deferral to
user exit, the context tracking state must shrink the counter
of transitions to/from RCU not watching. The only possible hazard
is to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption.
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN warnings.
On recent discussions, we also concluded that all those WRITE_ONCE()
and READ_ONCE() on list APIs deserve appropriate comments. Something
to be expected for the next cycle.
- Provide a script to apply several configs to several commits with torture.
- Allow torture to reuse a build directory in order to save needless
rebuild time.
- Various cleanups.
-----BEGIN PGP SIGNATURE-----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=XnUt
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Properly handle SRCU readers within IRQ disabled sections in tiny
SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write
side (using full RCU grace period ordering instead of simply
full ordering) as compared to "traditional" non-fast SRCU. But
those srcu-fast flavours are going to be optimized in two
different ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next
cycle. Only the new interfaces are added for now, along with
related torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering)
without waiting for the read side to tell which to use.
This also optimizes the read side altogether with moving flavour
debug checks under debug config and with removing a costly RmW
operation on their first call.
- Make some diagnostic functions tracing safe
Refscale:
- Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code
Miscellanous:
- In order to prepare the layout for nohz_full work deferral to user
exit, the context tracking state must shrink the counter of
transitions to/from RCU not watching. The only possible hazard is
to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN
warnings. On recent discussions, we also concluded that all those
WRITE_ONCE() and READ_ONCE() on list APIs deserve appropriate
comments. Something to be expected for the next cycle
- Provide a script to apply several configs to several commits with
torture
- Allow torture to reuse a build directory in order to save needless
rebuild time
- Various cleanups"
* tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (29 commits)
refscale: Add SRCU-fast-updown readers
refscale: Exercise DEFINE_STATIC_SRCU_FAST() and init_srcu_struct_fast()
rcutorture: Make srcu{,d}_torture_init() announce the SRCU type
srcu: Create an SRCU-fast-updown API
refscale: Do not disable interrupts for tests involving local_bh_enable()
refscale: Add non-atomic per-CPU increment readers
refscale: Add this_cpu_inc() readers
refscale: Add preempt_disable() readers
refscale: Add local_bh_disable() readers
refscale: Add local_irq_disable() and local_irq_save() readers
torture: Permit negative kvm.sh --kconfig numberic arguments
srcu: Add SRCU_READ_FLAVOR_FAST_UPDOWN CPP macro
rcu: Mark diagnostic functions as notrace
rcutorture: Make TREE04 use CONFIG_RCU_DYNTICKS_TORTURE
rcutorture: Remove redundant rcutorture_one_extend() from rcu_torture_one_read()
rcutorture: Permit kvm-again.sh to re-use the build directory
torture: Add kvm-series.sh to test commit/scenario combination
rcu: use WRITE_ONCE() for ->next and ->pprev of hlist_nulls
locktorture: Fix memory leak in param_set_cpumask()
doc: Update for SRCU-fast definitions and initialization
...
|
||
|---|---|---|
| .. | ||
| accounting | ||
| arch | ||
| bootconfig | ||
| bpf | ||
| build | ||
| certs | ||
| cgroup | ||
| counter | ||
| crypto | ||
| debugging | ||
| docs | ||
| firewire | ||
| firmware | ||
| gpio | ||
| hv | ||
| iio | ||
| include | ||
| kvm/kvm_stat | ||
| laptop | ||
| leds | ||
| lib | ||
| memory-model | ||
| mm | ||
| net | ||
| objtool | ||
| pcmcia | ||
| perf | ||
| power | ||
| rcu | ||
| sched | ||
| sched_ext | ||
| scripts | ||
| sound | ||
| spi | ||
| testing | ||
| thermal | ||
| time | ||
| tracing | ||
| usb | ||
| verification | ||
| virtio | ||
| wmi | ||
| workqueue | ||
| writeback | ||
| Makefile | ||