mirror of
https://github.com/torvalds/linux.git
synced 2026-05-30 01:53:29 +02:00
91c68a7c1d
Testing has revealed that the temperature in the rtp controller of the A10
(sun4i) SoC has a different curve then on the A13 (sun5i) and later models.
Add a new sun5i-a13-ts compatible to differentiate the newer models and
set the curve based on the compatible string.
The new curve is still not ideal on all A10-s, that seems to have to
do with there being a large spread between different A10-s out there,
the new curve us based on callibration results on 4 completely different
models:
raw min raw max temp min temp max stepsize offset
Tong Zhang's hackberry 2402 2680 45.0 80.0 0.125 -255.3
Hansg's Cubieboard 2207 2300 36.0 45.0 0.096 -175.8
Olliver's lime 1 (*): 2258 2537 48.3 87.1 0.139 -265.7
Olliver's lime 2 (*): 2222 2486 46.7 91.7 0.170 -331.0
*) from: http://linux-sunxi.org/Temperature_Calibration
Average all 4: 0.133 -257.0
Average without outliers (middle 2): 0.132 -261.0
Since it is better to slightly overreport the temperature this patch uses
the average of all 4 as curve.
This fixes the temperature reported on the A10 being much higher then
expected.
Reported-by: Tong Zhang <lovewilliam@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
||
|---|---|---|
| .. | ||
| auo_pixcir_ts.txt | ||
| bu21013.txt | ||
| edt-ft5x06.txt | ||
| egalax-ts.txt | ||
| goodix.txt | ||
| lpc32xx-tsc.txt | ||
| mms114.txt | ||
| pixcir_i2c_ts.txt | ||
| sitronix-st1232.txt | ||
| stmpe.txt | ||
| sun4i.txt | ||
| sx8654.txt | ||
| ti-tsc-adc.txt | ||
| touchscreen.txt | ||
| tsc2005.txt | ||
| tsc2007.txt | ||
| zforce_ts.txt | ||