Grygorii Strashko 623bfb5818 net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround ... [ Upstream commit c1a8d0a3ac ] Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2018-01-02 20:33:26 +01:00
..
amd.c
aquantia.c	net: phy: aquantia/teranetics: Convert to use module_phy_driver macro	2015-10-14 19:01:16 -07:00
at803x.c	net: phy: at803x: Change error to EINVAL for invalid MAC	2017-12-25 14:22:14 +01:00
bcm-cygnus.c	net: phy: Broadcom Cygnus internal Etherent PHY driver	2015-10-08 04:45:52 -07:00
bcm-phy-lib.c	net: phy: bcm-phy-lib: Fix module license issue	2015-10-18 19:35:10 -07:00
bcm-phy-lib.h	net: phy: Add Broadcom phy library for common interfaces	2015-10-08 04:45:46 -07:00
bcm7xxx.c	net: phy: bcm7xxx: Modified to use global core register defines	2015-10-08 04:45:53 -07:00
bcm63xx.c	net: phy: bcm63xx: Utilize correct config_intr function	2017-02-04 09:45:09 +01:00
bcm87xx.c
broadcom.c	broadcom: fix PHY_ID_BCM5481 entry in the id table	2015-11-23 23:29:27 -05:00
cicada.c
davicom.c
dp83640_reg.h
dp83640.c	net: dp83640: Avoid NULL pointer dereference.	2017-07-21 07:44:54 +02:00
dp83848.c	net: phy: dp83848: Add TI DP83848 Ethernet PHY	2015-10-22 06:37:19 -07:00
dp83867.c	net: phy: dp83867: fix irq generation	2017-08-11 09:08:56 -07:00
et1011c.c
fixed_phy.c	phy: fixed-phy: properly validate phy in fixed_phy_update_state()	2015-09-24 23:04:53 -07:00
icplus.c
Kconfig	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net	2015-10-24 06:54:12 -07:00
lxt.c
Makefile	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net	2015-10-24 06:54:12 -07:00
marvell.c	net: phy: fix marvell phy status reading	2017-06-29 12:48:53 +02:00
mdio_bus.c	net: phy: Add nested variants of mdiobus read/write	2015-10-23 05:57:43 -07:00
mdio-bcm-iproc.c	net: phy: Initialize mdio clock at probe function	2017-06-29 12:48:53 +02:00
mdio-bcm-unimac.c	net: phy: mdio-bcm-unimac: Fix module autoload for OF platform driver	2015-09-21 16:11:20 -07:00
mdio-bitbang.c
mdio-gpio.c	net: mdio-gpio: move platform data header	2015-10-21 19:50:44 -07:00
mdio-moxart.c
mdio-mux-gpio.c
mdio-mux-mmioreg.c	net: phy: mdio: add missing of_node_put	2015-10-26 22:08:12 -07:00
mdio-mux.c	net: phy: mdio-mux: Check return value of mdiobus_alloc()	2015-12-14 14:27:40 -05:00
mdio-octeon.c
mdio-sun4i.c
micrel.c	net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround	2018-01-02 20:33:26 +01:00
microchip.c	add microchip LAN88xx phy driver	2015-09-09 17:19:14 -07:00
national.c
phy_device.c	net: phy: Fix PHY unbind crash	2017-08-11 09:08:55 -07:00
phy.c	Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"	2017-09-27 11:00:11 +02:00
qsemi.c
realtek.c
smsc.c	net: phy: smsc: disable energy detect mode	2015-10-21 06:41:44 -07:00
spi_ks8995.c	spi_ks8995: fix "BUG: key accdaa28 not in .data!"	2017-12-16 10:33:53 +01:00
ste10Xp.c
teranetics.c	net: phy: aquantia/teranetics: Convert to use module_phy_driver macro	2015-10-14 19:01:16 -07:00
vitesse.c	net: phy: vitesse: add support for VSC8601	2015-11-16 14:18:40 -05:00