linux/include
Douglas Anderson 7ed49e1bf5 mmc: core: API to temporarily disable retuning for SDIO CRC errors
commit 0a55f4ab96 upstream.

Normally when the MMC core sees an "-EILSEQ" error returned by a host
controller then it will trigger a retuning of the card.  This is
generally a good idea.

However, if a command is expected to sometimes cause transfer errors
then these transfer errors shouldn't cause a re-tuning.  This
re-tuning will be a needless waste of time.  One example case where a
transfer is expected to cause errors is when transitioning between
idle (sometimes referred to as "sleep" in Broadcom code) and active
state on certain Broadcom WiFi SDIO cards.  Specifically if the card
was already transitioning between states when the command was sent it
could cause an error on the SDIO bus.

Let's add an API that the SDIO function drivers can call that will
temporarily disable the auto-tuning functionality.  Then we can add a
call to this in the Broadcom WiFi driver and any other driver that
might have similar needs.

NOTE: this makes the assumption that the card is already tuned well
enough that it's OK to disable the auto-retuning during one of these
error-prone situations.  Presumably the driver code performing the
error-prone transfer knows how to recover / retry from errors.  ...and
after we can get back to a state where transfers are no longer
error-prone then we can enable the auto-retuning again.  If we truly
find ourselves in a case where the card needs to be retuned sometimes
to handle one of these error-prone transfers then we can always try a
few transfers first without auto-retuning and then re-try with
auto-retuning if the first few fail.

Without this change on rk3288-veyron-minnie I periodically see this in
the logs of a machine just sitting there idle:
  dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25 11:35:53 +08:00
..
acpi
asm-generic x86/unwind/orc: Fix ORC unwind table alignment 2019-03-23 20:10:10 +01:00
clocksource
crypto crypto: speck - remove Speck 2018-11-13 11:08:46 -08:00
drm drm: add fallback override/firmware EDID modes workaround 2019-06-19 08:18:07 +02:00
dt-bindings ARM: SoC: late updates 2018-08-25 14:12:36 -07:00
keys keys: Fix dependency loop between construction record and auth key 2019-03-23 20:09:48 +01:00
kvm KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock 2019-03-23 20:09:42 +01:00
linux mmc: core: API to temporarily disable retuning for SDIO CRC errors 2019-06-25 11:35:53 +08:00
math-emu
media media: vb2: add waiting_in_dqbuf flag 2019-05-31 06:46:04 -07:00
memory
misc
net tcp: add tcp_min_snd_mss sysctl 2019-06-17 19:51:56 +02:00
pcmcia pcmcia: remove long deprecated pcmcia_request_exclusive_irq() function 2018-08-18 12:30:42 -07:00
ras
rdma IB/rxe: Revise the ib_wr_opcode enum 2018-11-13 11:08:43 -08:00
scsi scsi: fcoe: make use of fip_mode enum complete 2019-04-05 22:33:04 +02:00
soc soc: fsl: qbman: add APIs to retrieve the probing status 2018-09-27 15:43:35 -05:00
sound ALSA: compress: Fix stop handling on compressed capture streams 2019-02-12 19:47:23 +01:00
target scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough 2019-01-26 09:32:38 +01:00
trace rxrpc: Fix client call connect/disconnect race 2019-04-20 09:16:05 +02:00
uapi tcp: tcp_fragment() should apply sane memory limits 2019-06-17 19:51:56 +02:00
video udlfb: introduce a rendering mutex 2019-05-25 18:23:30 +02:00
xen Revert "xen/balloon: Mark unallocated host memory as UNUSABLE" 2018-12-17 09:24:39 +01:00