linux/include
Wolfram Sang 5e63b85a48 memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode
commit fff53a551d upstream.

This patch fixes 2 problems:
[1] The output warning logs and data loss when performing
mount/umount then remount the device with jffs2 format.
[2] The access width of SMWDR[0:1]/SMRDR[0:1] register is wrong.

This is the sample warning logs when performing mount/umount then
remount the device with jffs2 format:
jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x031c51d4:
Read 0x00034e00, calculated 0xadb272a7

The reason for issue [1] is that the writing data seems to
get messed up.
Data is only completed when the number of bytes is divisible by 4.
If you only have 3 bytes of data left to write, 1 garbage byte
is inserted after the end of the write stream.
If you only have 2 bytes of data left to write, 2 bytes of '00'
are added into the write stream.
If you only have 1 byte of data left to write, 2 bytes of '00'
are added into the write stream. 1 garbage byte is inserted after
the end of the write stream.

To solve problem [1], data must be written continuously in serial
and the write stream ends when data is out.

Following HW manual 62.2.15, access to SMWDR0 register should be
in the same size as the transfer size specified in the SPIDE[3:0]
bits in the manual mode enable setting register (SMENR).
Be sure to access from address 0.

So, in 16-bit transfer (SPIDE[3:0]=b'1100), SMWDR0 should be
accessed by 16-bit width.
Similar to SMWDR1, SMDDR0/1 registers.
In current code, SMWDR0 register is accessed by regmap_write()
that only set up to do 32-bit width.

To solve problem [2], data must be written 16-bit or 8-bit when
transferring 1-byte or 2-byte.

Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com>
[wsa: refactored to use regmap only via reg_read/reg_write]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922091007.5516-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18 14:03:47 +01:00
..
acpi ACPI: fix NULL pointer dereference 2021-08-08 09:05:23 +02:00
asm-generic vmlinux.lds.h: Handle clang's module.{c,d}tor sections 2021-08-18 08:59:18 +02:00
clocksource clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFG 2021-07-14 16:56:12 +02:00
crypto crypto: public_key: fix overflow during implicit conversion 2021-09-18 13:40:08 +02:00
drm drm: protect drm_master pointers in drm_lease.c 2021-09-18 13:40:19 +02:00
dt-bindings clk: imx8mq: remove SYS PLL 1/2 clock gates 2021-07-14 16:56:20 +02:00
keys certs: Add EFI_CERT_X509_GUID support for dbx entries 2021-06-30 08:47:30 -04:00
kunit
kvm
linux bpf: Prevent increasing bpf_jit_limit above max 2021-11-18 14:03:42 +01:00
math-emu
media media: subdev: disallow ioctl for saa6588/davinci 2021-07-19 09:45:02 +02:00
memory memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode 2021-11-18 14:03:47 +01:00
misc
net net: multicast: calculate csum of looped-back and forwarded packets 2021-11-18 14:03:43 +01:00
pcmcia
ras
rdma
scsi scsi: iscsi: Fix conn use after free during resets 2021-07-20 16:05:41 +02:00
soc firmware: raspberrypi: Keep count of all consumers 2021-09-15 09:50:41 +02:00
sound ALSA: hda: intel: Allow repeatedly probing on codec configuration errors 2021-10-27 09:56:54 +02:00
target scsi: target: core: Add cmd length set before cmd complete 2021-03-17 17:06:25 +01:00
trace erofs: fix up erofs_lookup tracepoint 2021-09-30 10:11:00 +02:00
uapi fq_codel: reject silly quantum parameters 2021-09-22 12:28:05 +02:00
vdso
video
xen