..
8250
serial: 8250_mxpcie: enable automatic RTS/CTS flow control
2026-08-03 16:51:57 +02:00
jsm
serial: jsm: Drop unused driver_data assigment and redundant zeros
2026-05-11 16:56:03 +02:00
21285.c
altera_jtaguart.c
serial: altera_jtaguart: handle uart_add_one_port() failures
2026-05-22 11:48:23 +02:00
altera_uart.c
amba-pl010.c
amba-pl011.c
serial: amba-pl011: keep console clock enabled for atomic writes
2026-08-03 16:44:58 +02:00
apbuart.c
serial: apbuart: remove check for zero baud rate from uart_get_baud_rate()
2026-05-11 17:19:52 +02:00
apbuart.h
ar933x_uart.c
serial: ar933x: Add polling support
2025-10-22 12:04:43 +02:00
arc_uart.c
atmel_serial.c
tty: atmel_serial: update outdated reference to atmel_tasklet_func()
2026-03-30 17:36:45 +02:00
atmel_serial.h
bcm63xx_uart.c
serial: bcm63xx-uart: silence false positive coccinelle warning on clk_put
2026-07-30 16:58:19 +02:00
clps711x.c
cpm_uart.c
serial: cpm_uart: replace irq_of_parse_and_map with platform_get_irq
2026-07-10 14:40:56 +02:00
cpm_uart.h
digicolor-usart.c
dz.c
serial: dz: Convert to use a platform device
2026-05-22 11:52:34 +02:00
dz.h
earlycon-riscv-sbi.c
earlycon-semihost.c
earlycon.c
serial: uniformize serial port I/O infos display
2026-07-10 14:50:12 +02:00
fsl_linflexuart.c
fsl_lpuart.c
serial: fsl_lpuart: fix rx buffer and DMA map leaks in start_rx_dma
2026-05-11 17:18:43 +02:00
icom.c
serial: icom: remove check for zero baud rate from uart_get_baud_rate()
2026-05-11 17:19:52 +02:00
imx_earlycon.c
imx.c
serial: imx: Remove redundant dev_err()
2026-07-30 16:58:40 +02:00
ip22zilog.c
tty: serial: ip22zilog: Fix section mispatch warning
2026-04-02 15:59:56 +02:00
ip22zilog.h
Kconfig
Linux 7.1-rc6
2026-06-01 18:08:02 +02:00
kgdboc.c
drivers/tty/serial/kgdboc: Use strscpy() to copy strings into arrays
2026-07-10 14:43:24 +02:00
lantiq.c
liteuart.c
lpc32xx_hs.c
ma35d1_serial.c
serial: ma35d1: Fix OF node reference leaks in console init
2026-07-10 14:44:24 +02:00
Makefile
serial: remove drivers for espressif esp32
2026-03-12 15:06:52 +01:00
max310x.c
serial: max310x: remove always included kconfig.h
2026-07-30 16:47:28 +02:00
max3100.c
Merge 7.2-rc3 into tty-next
2026-07-13 07:11:57 +02:00
mcf.c
men_z135_uart.c
tty: serial: men_z135_uart: replace __get_free_page() with kmalloc()
2026-07-07 17:22:10 +02:00
meson_uart.c
milbeaut_usio.c
mpc52xx_uart.c
tty: serial: mpc52xx_uart: add bounds check for psc_num array index
2026-07-10 14:40:11 +02:00
mps2-uart.c
msm_serial.c
serial: msm: Disable DMA for kernel console UART
2026-07-07 17:24:42 +02:00
mux.c
serial: mux: Fix kernel doc for mux_poll()
2025-11-26 13:11:17 +01:00
mvebu-uart.c
serial: mvebu-uart: Remove redundant dev_err()
2026-07-30 16:58:40 +02:00
mxs-auart.c
serial: mxs-auart: replace hardcoded 1 with predefined macro GPIO_LINE_DIRECTION_IN
2026-05-11 16:55:37 +02:00
omap-serial.c
serial: Replace driver usage of UPF_CONS_FLOW
2026-05-11 16:58:38 +02:00
owl-uart.c
pch_uart.c
tty: serial: pch_uart: add check for pci_get_slot()
2026-07-10 14:42:58 +02:00
pic32_uart.c
serial: pic32_uart: update include to use pic32.h from platform_data
2026-01-30 15:29:08 +01:00
pmac_zilog.c
pmac_zilog.h
pxa.c
serial: Replace driver usage of UPF_CONS_FLOW
2026-05-11 16:58:38 +02:00
qcom_geni_serial.c
serial: qcom-geni: Use geni_se_set_perf_level() for baud rate perf level
2026-08-03 16:47:21 +02:00
rda-uart.c
rp2.c
tty: serial: rp2: Use named initializer for pci_device_id::driver_data
2026-07-07 14:27:24 +02:00
rsci.c
serial: rsci: remove check for zero baud rate from uart_get_baud_rate()
2026-07-30 16:58:08 +02:00
rsci.h
serial: sh-sci: Add support for RZ/G3L RSCI
2026-03-30 17:36:58 +02:00
sa1100.c
samsung_tty.c
Linux 7.1-rc6
2026-06-01 18:08:02 +02:00
sb1250-duart.c
sc16is7xx_i2c.c
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
2026-07-03 07:38:17 +02:00
sc16is7xx_spi.c
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
2026-07-03 07:38:17 +02:00
sc16is7xx.c
Merge 7.2-rc5 into tty-next
2026-07-27 08:58:54 +02:00
sc16is7xx.h
serial: sc16is7xx: use KBUILD_MODNAME
2025-10-28 15:25:41 +01:00
sccnxp.c
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
2026-07-03 07:38:17 +02:00
serial_base_bus.c
driver core: Replace dev->of_node_reused with dev_of_node_reused()
2026-04-26 23:50:20 +02:00
serial_base.h
serial_core.c
serial: core: display 32 for MEM32 and MEM32BE UPIO types
2026-07-17 12:59:56 +02:00
serial_ctrl.c
serial_mctrl_gpio.c
serial: mctrl_gpio: Remove redundant dev_err()
2026-07-30 16:58:40 +02:00
serial_mctrl_gpio.h
serial_port.c
serial_txx9.c
serial: Replace driver usage of UPF_CONS_FLOW
2026-05-11 16:58:38 +02:00
serial-tegra.c
sh-sci-common.h
serial: sh-sci: Add support for RZ/G3L RSCI
2026-03-30 17:36:58 +02:00
sh-sci.c
serial: sh-sci: remove check for zero baud rate from uart_get_baud_rate()
2026-07-30 16:58:10 +02:00
sifive.c
sprd_serial.c
serial: sprd: Remove redundant dev_err()
2026-07-30 16:58:40 +02:00
st-asc.c
stm32-usart.c
stm32-usart.h
suncore.c
sunhv.c
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
2026-02-21 17:09:51 -08:00
sunplus-uart.c
sunsab.c
Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses
2026-02-22 08:26:33 -08:00
sunsab.h
sunsu.c
serial: Replace driver usage of UPF_CONS_FLOW
2026-05-11 16:58:38 +02:00
sunzilog.c
sunzilog.h
tegra-tcu.c
tegra-utc.c
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
2026-07-03 07:38:17 +02:00
timbuart.c
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
2026-02-21 17:09:51 -08:00
timbuart.h
uartlite.c
serial: uartlite: fix PM runtime usage count underflow on probe
2026-03-12 15:30:51 +01:00
ucc_uart.c
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
2026-02-21 17:09:51 -08:00
vt8500_serial.c
xilinx_uartps.c
serial: xilinx_uartps: Drop unused include
2026-03-30 17:36:34 +02:00
zs.c
serial: zs: Convert to use a platform device
2026-05-22 11:52:34 +02:00
zs.h
serial: zs: Convert to use a platform device
2026-05-22 11:52:34 +02:00
55edf8511f