mirror of
https://github.com/torvalds/linux.git
synced 2026-10-23 07:11:03 +02:00
4403278e4e
- Make the Intel powerclamp thermal driver reject invalid window_size
values, drop redundant clamp() from duration_set() in it, and
simplify 4 functions in it (Thorsten Blum)
- Add rugged Panther Lake support to the intel_tcc_cooling thermal
driver (Srinivas Pandruvada)
- Fix temperature selection around 0 C in the int340x thermal driver,
drop redundant else from proc_thermal_add() in it, and simplify
slider_def_*_set() in it (Thorsten Blum)
- Drop unbalanced paren from cpu-idle-cooling.rst (Manuel Ebner)
- Use %pe to print error pointers symbolically in the thermal control
code and fix assorted typos in comments in it (Sumeet Pawnikar and
Hemanth Selam)
- Add the Exynos ACPM thermal driver for Google GS101, along with
DT bindings and a MAINTAINERS entry (Tudor Ambarus)
- Add Renesas RZ/G3L thermal sensor support and DT bindings, and move
default calibration values to per-SoC match data (Biju Das)
- Add Qualcomm MSM8952 TSENS support and the corresponding DT binding
compatible (Muzaffer Kadir)
- Document the Qualcomm PMAU0102 Master BandGap temperature monitor
compatible in the DT bindings (Dhruvin Rajpura)
- Extend the QCom TSENS v2 trip temperature limits to the hardware
range of -204°C to +204°C to prevent interrupt storms when operating
beyond the previous software limits (Priyansh Jain)
- Fix temperature threshold map indexing in the QCom SPMI temperature
alarm driver to prevent out-of-bounds reads (Georgi Djakov)
- Describe the additional bus clock required by the Amlogic T7 thermal
sensor and switch the driver to the clk_bulk API to manage multiple
clocks (Ronald Claveau)
- Request the Airoha EN7581 IRQ after thermal zone registration to
prevent the interrupt handler from accessing an unregistered or
already freed thermal zone (Vitaliy Sochnev)
- Fix the Airoha AN7583 ADC mux field mapping, serialize access to the
shared ADC, and verify mux selection to avoid invalid temperature
readings and spurious critical shutdowns (Vitaliy Sochnev)
- Register separate thermal zones for the AN7583 bandgap, GbE and CPU
sensors, and update the DT bindings to use one thermal sensor cell
to select the sensor (Vitaliy Sochnev)
- Fix signed integer overflow in the Renesas RZ/G3E temperature-to-code
conversion, preserve compare interrupt state across runtime PM,
and prevent overlapping temperature conversions (Ovidiu Panait)
- Remove redundant trip window validation and runtime PM
pm_runtime_mark_last_busy() calls from the Renesas RZ/G3E driver
(Ovidiu Panait)
- Propagate reset assertion failures from Renesas RZ/G3E suspend and
attempt to restore power if the sensor was active (Pengpeng Hou)
- Stop the TI bandgap alert IRQ before removing sensor interfaces and
cancel pending alert work to prevent use-after-free on driver removal
(Weigang He)
- Validate Spreadtrum sensor IDs read from the device tree before using
them for register offsets and array indexing (Weigang He)
- Convert the TI OMAP bandgap DT bindings to schema and document the
DRA752 compatible and thermal sensor cells (Bhargav Joshi)
- Use DT property helpers matching the signed temperature and unsigned
hysteresis types defined by the thermal zone bindings (Rob Herring)
- Reuse common error handling code in the power allocator governor
bind callback (Markus Elfring)
- Constify the thermal zone device operations in the i.MX9 driver
(Christophe JAILLET)
- Fix kernel-doc parameter names and firmware node references in the
cooling device registration helpers (Aryan Sinha)
- Correct the documented return value of ti_bandgap_get_sensor_data()
to describe validation errors and potentially NULL stored data
(Karl Mehltretter)
- Ensure NUL-termination when copying the cooling device command-line
argument in tmon and fix the associated string truncation warning
(Florian Fainelli)
- Fix undefined behavior caused by a signed shift in the tmon thermal
zone binding display (Liu Jing)
- Fix wording in tmon comments (Hemanth Selam)
- Simplify cpufreq_set_cur_state() in the cpufreq_cooling thermal
control driver (Thorsten Blum)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmrWO9cSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1HisH/3xEFIHZG7l+OHCETxNJDq3kC+4g48OM
s7c96CuKI//bhNe0IZ0CBhSskqHAeU8gpxL3PjJOXFBFdrWkPOxjwzOVCOY0JOA6
CZK8JiInyY6zBGXneHrySGD9QvJJ21EoYH0aIKaRAfgQyCHj5ETKa/SxAlNuLkqY
wKMhRdofD+1ZvTe4voV4F9Brb4JUruPAJkMYdG1cU8LV9SVkW9KaEYWsS/ZLm7aC
rY8UexK48vR9o80pR/zI48j5dndhO29PzRV5WeR1GSMcnYxIE7K5W4zTniwj5Zoh
tv8fdC05eFbN2b3IEwaHix5xn7wK+T5KzXhau1aH+YJTSVeaW1gZo+k=
=uhgs
-----END PGP SIGNATURE-----
Merge tag 'thermal-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These are mostly updates of thermal drivers including a new Exynos
ACPM thermal driver for Google GS101, new Renesas RZ/G3L thermal
sensor support, new Qualcomm MSM8952 TSENS support, new Qualcomm
PMAU0102 Master BandGap temperature monitor support in DT bindings,
and new rugged Panther Lake support in intel_tcc_cooling. Moreover,
the AN7583 driver is extended to register separate thermal zones for
bandgap, GbE and CPU (its DT bindings are updated accordingly).
There are also multiple fixes and assorted cleanups, as usual.
Specifics:
- Make the Intel powerclamp thermal driver reject invalid window_size
values, drop redundant clamp() from duration_set() in it, and
simplify 4 functions in it (Thorsten Blum)
- Add rugged Panther Lake support to the intel_tcc_cooling thermal
driver (Srinivas Pandruvada)
- Fix temperature selection around 0 C in the int340x thermal driver,
drop redundant else from proc_thermal_add() in it, and simplify
slider_def_*_set() in it (Thorsten Blum)
- Drop unbalanced paren from cpu-idle-cooling.rst (Manuel Ebner)
- Use %pe to print error pointers symbolically in the thermal control
code and fix assorted typos in comments in it (Sumeet Pawnikar and
Hemanth Selam)
- Add the Exynos ACPM thermal driver for Google GS101, along with DT
bindings and a MAINTAINERS entry (Tudor Ambarus)
- Add Renesas RZ/G3L thermal sensor support and DT bindings, and move
default calibration values to per-SoC match data (Biju Das)
- Add Qualcomm MSM8952 TSENS support and the corresponding DT binding
compatible (Muzaffer Kadir)
- Document the Qualcomm PMAU0102 Master BandGap temperature monitor
compatible in the DT bindings (Dhruvin Rajpura)
- Extend the QCom TSENS v2 trip temperature limits to the hardware
range of -204°C to +204°C to prevent interrupt storms when
operating beyond the previous software limits (Priyansh Jain)
- Fix temperature threshold map indexing in the QCom SPMI temperature
alarm driver to prevent out-of-bounds reads (Georgi Djakov)
- Describe the additional bus clock required by the Amlogic T7
thermal sensor and switch the driver to the clk_bulk API to manage
multiple clocks (Ronald Claveau)
- Request the Airoha EN7581 IRQ after thermal zone registration to
prevent the interrupt handler from accessing an unregistered or
already freed thermal zone (Vitaliy Sochnev)
- Fix the Airoha AN7583 ADC mux field mapping, serialize access to
the shared ADC, and verify mux selection to avoid invalid
temperature readings and spurious critical shutdowns (Vitaliy
Sochnev)
- Register separate thermal zones for the AN7583 bandgap, GbE and CPU
sensors, and update the DT bindings to use one thermal sensor cell
to select the sensor (Vitaliy Sochnev)
- Fix signed integer overflow in the Renesas RZ/G3E
temperature-to-code conversion, preserve compare interrupt state
across runtime PM, and prevent overlapping temperature conversions
(Ovidiu Panait)
- Remove redundant trip window validation and runtime PM
pm_runtime_mark_last_busy() calls from the Renesas RZ/G3E driver
(Ovidiu Panait)
- Propagate reset assertion failures from Renesas RZ/G3E suspend and
attempt to restore power if the sensor was active (Pengpeng Hou)
- Stop the TI bandgap alert IRQ before removing sensor interfaces and
cancel pending alert work to prevent use-after-free on driver
removal (Weigang He)
- Validate Spreadtrum sensor IDs read from the device tree before
using them for register offsets and array indexing (Weigang He)
- Convert the TI OMAP bandgap DT bindings to schema and document the
DRA752 compatible and thermal sensor cells (Bhargav Joshi)
- Use DT property helpers matching the signed temperature and
unsigned hysteresis types defined by the thermal zone bindings (Rob
Herring)
- Reuse common error handling code in the power allocator governor
bind callback (Markus Elfring)
- Constify the thermal zone device operations in the i.MX9 driver
(Christophe JAILLET)
- Fix kernel-doc parameter names and firmware node references in the
cooling device registration helpers (Aryan Sinha)
- Correct the documented return value of ti_bandgap_get_sensor_data()
to describe validation errors and potentially NULL stored data
(Karl Mehltretter)
- Ensure NUL-termination when copying the cooling device command-line
argument in tmon and fix the associated string truncation warning
(Florian Fainelli)
- Fix undefined behavior caused by a signed shift in the tmon thermal
zone binding display (Liu Jing)
- Fix wording in tmon comments (Hemanth Selam)
- Simplify cpufreq_set_cur_state() in the cpufreq_cooling thermal
control driver (Thorsten Blum)"
* tag 'thermal-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
thermal/drivers/rzg3e: Propagate reset assertion failure from suspend
thermal: ti-soc-thermal: Fix the return value in ti_bandgap_get_sensor_data() kernel-doc
thermal/fw: Fix kernel-doc parameter names
thermal/qcom/tsens: Add support for MSM8952 tsens
dt-bindings: thermal: tsens: Add MSM8952
thermal/drivers/amlogic: Switch to clk_bulk API to support multiple clocks
dt-bindings: thermal: amlogic: describe bus clock for t7-thermal
tools/thermal/tmon: Fix string truncation warning in optarg copy
thermal/drivers/airoha: Register a thermal zone per AN7583 sensor
dt-bindings: arm: airoha: Use one thermal sensor cell for AN7583
thermal/drivers/airoha: Serialise access to the shared ADC
thermal/drivers/airoha: Fix AN7583 ADC mux field mapping
thermal/drivers/sprd: validate the sensor id from the device tree
thermal/drivers/ti-soc-thermal: Cancel pending alert work on remove
thermal/drivers/qcom-spmi-temp-alarm: Fix temp_map indexing
thermal: gov_power_allocator: Use common error handling code in power_allocator_bind()
tools/thermal/tmon: Fix signed shift UB in binding display
MAINTAINERS: Add entry for Samsung Exynos ACPM thermal driver
thermal/drivers/samsung: Add Exynos ACPM TMU driver GS101
dt-bindings: thermal: Add Google GS101 TMU
...
|
||
|---|---|---|
| .. | ||
| accounting | ||
| arch | ||
| bootconfig | ||
| bpf | ||
| build | ||
| certs | ||
| cgroup | ||
| counter | ||
| crypto | ||
| debugging | ||
| dma | ||
| docs | ||
| firewire | ||
| firmware | ||
| gpio | ||
| hv | ||
| iio | ||
| include | ||
| kvm/kvm_stat | ||
| laptop | ||
| leds | ||
| lib | ||
| memory-model | ||
| mm | ||
| net | ||
| objtool | ||
| pcmcia | ||
| perf | ||
| platform/x86/amd | ||
| power | ||
| rcu | ||
| sched | ||
| sched_ext | ||
| scripts | ||
| sound | ||
| spi | ||
| testing | ||
| thermal | ||
| time | ||
| tracing | ||
| unittests | ||
| usb | ||
| verification | ||
| virtio | ||
| wmi | ||
| workqueue | ||
| writeback | ||
| Makefile | ||