linux/drivers/input/touchscreen
Greg Kroah-Hartman f62252bf39 First set of IIO new device support, features and cleanups in the 4.19 cycle
The usual mixed bunch.  Particular good to see is the generic
 touch screen driver.  Will be interesting to see if this works
 for other ADCs without major changes.
 
 Core features
 * Channel types
   - New position relative channel type primarily for touch screen
     sensors to feed the generic touchscreen driver.
 
 New device support
 * ad5586
   - Add support for the AD5311R DAC.
 
 * Generic touch screen driver as an IIO consumer.
   - Note this is in input, but due to dependencies is coming through
     the IIO tree.
   - Specific support for this added to the at91-sama5d2 ADC.
   - Various necessary DT bindings added.
 
 Staging Drops
 * ADIS16060 gyro
   - A device with a very odd interface that was never cleanly supported.
     It's now very difficult to get, so unlikely it'll ever be fixed up.
 
 Cleanups and minor features and fixes
 * core
   - Fix y2038 timestamp issues now the core support is in place.
 * 104-quad-8
   - Provide some defines for magic numbers to help readability.
   - Fix an off by one error in register selection
 * ad7606
   - Put in a missing function parameter name in a prototype.
 * adis16023
   - Use generic sign_extend function rather than local version.
 * adis16240
   - Use generic sign_extend funciton rather than local version.
 * at91-sama5d2
   - Drop dependency on HAS_DMA now this is handled elsewhere.  Will
     improve build test coverage.
   - Add oversampling ratio control.  Note there is a minor ABI change
     here to increase the apparent depth to 14 bits so as to allow
     for transparent provision of different oversampling ratios that
     drop the actual bit depth to 13 or 12 bits.
 * hx711
   - Add a MAINTAINERS entry for this device.
 * inv_mpu6050
   - Replace the timestamp fifo 'special' code with generic timestamp
     handling.
   - Switch to using local store of timestamp divider rather than rate
     as that is more helpful for accurate time measurement.
   - Fix an unaligned access that didn't seem to be causing any trouble.
   - Use the fifo overflow bit to track the overflow status rather than
     a software counter.
   - New timestamping mechanism to deal with missed sample interrupts.
 * stm32-adc
   - Drop HAS_DMA build dependency.
 * sun4i-gpadc
   - Select REGMAP_IRQ a very rarely hit build issue fix.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlsxT24RHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogOHRAAllFPJBoq+nVqGAqe6CjSmWhAFdyv/Ey0
 4iDBsdBHrzhxnDuatqzbFhvu9TgqQxMBSbcRfqrGnJrnCFDNcvo1eJcxq13YFPCy
 EitRhu5kUdZ6Ez+OQOjX77wGlPyh8idZnaUkWjowOjnXztkHQjy6IWTbDKFk9bPY
 9fGBpmPDn1xaVPPWh7lZVAdTwCt2i+efG4sGyZyMQODjtM0q2G1MoHm9ioqgg8lN
 hzO7YIrZmLlXRUhapQ2/61uwa/2WMrcGK5v8eCGphEZnPN5lUWrT//w91+BCQpBC
 A9gRFpWblz5qHaRpNhzNbQjUrGvTAeIhF+bdOV2W+oI8CJhTJ0AlNqtUXs2pbaJn
 FO6jGwkC+jOA3XdE4tbiqenuMSZNggXBCgyRMfIK5WuIeBF02w57KHxgefkGTnQe
 Iqc9QDLLfkGDsOoh1l/+TMWjAxfXJLd7d04wYcRIDy6wumTi6GJxUesiQAnyq5eo
 Rg+o8gbfZcnbgzphBRoQjjftFMPeYdr48bCGCmjFjNnIPnemmUZg988gTggl6NST
 mzbFBsAnejmYpT393FPL0K9dLVUq5cRngQMuLVDjR4VnlQEVMyV0O+CsW83iSM36
 3nqpaUOapqsKJT74n62k1YtzJgxr1uoyMS0LGjldAPLDiTgMf9YiPCCihCpiCY89
 K9gE6lzS70A=
 =SvKj
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of IIO new device support, features and cleanups in the 4.19 cycle

The usual mixed bunch.  Particular good to see is the generic
touch screen driver.  Will be interesting to see if this works
for other ADCs without major changes.

Core features
* Channel types
  - New position relative channel type primarily for touch screen
    sensors to feed the generic touchscreen driver.

New device support
* ad5586
  - Add support for the AD5311R DAC.

* Generic touch screen driver as an IIO consumer.
  - Note this is in input, but due to dependencies is coming through
    the IIO tree.
  - Specific support for this added to the at91-sama5d2 ADC.
  - Various necessary DT bindings added.

Staging Drops
* ADIS16060 gyro
  - A device with a very odd interface that was never cleanly supported.
    It's now very difficult to get, so unlikely it'll ever be fixed up.

Cleanups and minor features and fixes
* core
  - Fix y2038 timestamp issues now the core support is in place.
* 104-quad-8
  - Provide some defines for magic numbers to help readability.
  - Fix an off by one error in register selection
* ad7606
  - Put in a missing function parameter name in a prototype.
* adis16023
  - Use generic sign_extend function rather than local version.
* adis16240
  - Use generic sign_extend funciton rather than local version.
* at91-sama5d2
  - Drop dependency on HAS_DMA now this is handled elsewhere.  Will
    improve build test coverage.
  - Add oversampling ratio control.  Note there is a minor ABI change
    here to increase the apparent depth to 14 bits so as to allow
    for transparent provision of different oversampling ratios that
    drop the actual bit depth to 13 or 12 bits.
* hx711
  - Add a MAINTAINERS entry for this device.
* inv_mpu6050
  - Replace the timestamp fifo 'special' code with generic timestamp
    handling.
  - Switch to using local store of timestamp divider rather than rate
    as that is more helpful for accurate time measurement.
  - Fix an unaligned access that didn't seem to be causing any trouble.
  - Use the fifo overflow bit to track the overflow status rather than
    a software counter.
  - New timestamping mechanism to deal with missed sample interrupts.
* stm32-adc
  - Drop HAS_DMA build dependency.
* sun4i-gpadc
  - Select REGMAP_IRQ a very rarely hit build issue fix.
2018-06-26 07:47:37 +08:00
..
88pm860x-ts.c Input: 88pm860x-ts - fix child-node lookup 2018-01-08 17:40:59 -08:00
ad7877.c Input: ad7877 - use managed resource allocations 2018-01-22 16:25:53 -08:00
ad7879-i2c.c
ad7879-spi.c
ad7879.c
ad7879.h
ads7846.c
ar1021_i2c.c
atmel_mxt_ts.c Input: atmel_mxt_ts - fix reset-gpio for level based irqs 2018-05-24 09:56:47 -07:00
auo-pixcir-ts.c Input: auo-pixcir-ts - delete an unnecessary return statement 2018-01-22 16:28:59 -08:00
bcm_iproc_tsc.c
bu21013_ts.c
chipone_icn8318.c
chipone_icn8505.c Input: add support for ChipOne icn8505 based touchscreens 2018-05-09 13:29:35 -07:00
colibri-vf50-ts.c Input: remove unneeded MODULE_VERSION() usage in touchscreen drivers 2018-01-16 16:48:23 -08:00
cy8ctmg110_ts.c
cyttsp_core.c
cyttsp_core.h
cyttsp_i2c_common.c
cyttsp_i2c.c
cyttsp_spi.c
cyttsp4_core.c
cyttsp4_core.h
cyttsp4_i2c.c
cyttsp4_spi.c
da9034-ts.c
da9052_tsi.c Input: da9052_tsi - remove unused mutex 2018-01-22 16:28:03 -08:00
dynapro.c
edt-ft5x06.c Input: edt-ft5x06 - fix error handling for factory mode on non-M06 2018-01-24 14:43:10 -08:00
eeti_ts.c
egalax_ts_serial.c
egalax_ts.c
ektf2127.c
elants_i2c.c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2018-02-01 10:49:58 -08:00
elo.c
exc3000.c
fsl-imx25-tcq.c
fujitsu_ts.c
goodix.c Input: goodix - add new ACPI id for GPD Win 2 touch screen 2018-06-04 13:31:48 -07:00
gunze.c
hampshire.c
hideep.c Input: hideep - fix compile error due to missing include file 2017-12-18 13:40:15 -08:00
hp680_ts_input.c
htcpen.c
ili210x.c
imx6ul_tsc.c
inexio.c
ipaq-micro-ts.c
jornada720_ts.c
Kconfig input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen 2018-06-10 13:26:40 +01:00
lpc32xx_ts.c
mainstone-wm97xx.c
Makefile input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen 2018-06-10 13:26:40 +01:00
max11801_ts.c
mc13783_ts.c
mcs5000_ts.c
melfas_mip4.c Input: remove unneeded MODULE_VERSION() usage in touchscreen drivers 2018-01-16 16:48:23 -08:00
migor_ts.c
mk712.c Input: mk712 - update documentation web link 2018-05-29 16:34:22 -07:00
mms114.c Input: mms114 - add SPDX identifier 2018-02-02 16:04:10 -08:00
mtouch.c
mxs-lradc-ts.c
of_touchscreen.c Input: of_touchscreen - add MODULE_LICENSE 2018-01-10 16:38:12 -08:00
pcap_ts.c
penmount.c
pixcir_i2c_ts.c
raydium_i2c_ts.c Input: raydium_i2c_ts - include hardware version in firmware name 2018-01-05 09:28:39 -08:00
resistive-adc-touch.c input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen 2018-06-10 13:26:40 +01:00
rohm_bu21023.c
s3c2410_ts.c treewide: Switch DEFINE_TIMER callbacks to struct timer_list * 2017-11-21 15:57:05 -08:00
s6sy761.c Input: stmfts, s6sy761 - update my e-mail 2018-03-30 15:31:41 -07:00
silead.c Input: silead - add Chuwi Hi8 support 2018-03-14 09:56:31 -07:00
sis_i2c.c
st1232.c
stmfts.c Input: stmfts, s6sy761 - update my e-mail 2018-03-30 15:31:41 -07:00
stmpe-ts.c
sun4i-ts.c
sur40.c media: add video control handlers using V4L2 control framework 2018-02-14 13:29:55 -05:00
surface3_spi.c
sx8654.c
ti_am335x_tsc.c Input: ti_am335x_tsc - prevent system suspend when TSC is in use 2018-05-30 16:42:12 -07:00
touchit213.c
touchright.c
touchwin.c
tps6507x-ts.c
ts4800-ts.c
tsc40.c
tsc200x-core.c
tsc200x-core.h
tsc2004.c
tsc2005.c
tsc2007_core.c
tsc2007_iio.c
tsc2007.h
ucb1400_ts.c
usbtouchscreen.c Input: usbtouchscreen - add sysfs attribute for 3M MTouch firmware rev 2018-05-15 12:14:16 -07:00
w90p910_ts.c
wacom_i2c.c
wacom_w8001.c
wdt87xx_i2c.c Input: remove unneeded MODULE_VERSION() usage in touchscreen drivers 2018-01-16 16:48:23 -08:00
wm97xx-core.c docs: Fix some broken references 2018-06-15 18:10:01 -03:00
wm831x-ts.c
wm9705.c
wm9712.c
wm9713.c
zet6223.c
zforce_ts.c
zylonite-wm97xx.c