mirror of
https://github.com/torvalds/linux.git
synced 2026-07-31 19:47:08 +02:00
Linux kernel source tree
3678b2dd72
Dario Binacchi <dario.binacchi@amarulasolutions.com> says: The series adds support for the basic extended CAN controller (bxCAN) found in many low- to middle-end STM32 SoCs. The driver has been tested on the stm32f469i-discovery board with a kernel version 5.19.0-rc2 in loopback + silent mode: ip link set can0 type can bitrate 125000 loopback on listen-only on ip link set up can0 candump can0 -L & cansend can0 300#AC.AB.AD.AE.75.49.AD.D1 For uboot and kernel compilation, as well as for rootfs creation I used buildroot: make stm32f469_disco_sd_defconfig make but I had to patch can-utils and busybox as can-utils and iproute are not compiled for MMU-less microcotrollers. In the case of can-utils, replacing the calls to fork() with vfork(), I was able to compile the package with working candump and cansend applications, while in the case of iproute, I ran into more than one problem and finally I decided to extend busybox's ip link command for CAN-type devices. I'm still wondering if it was really necessary, but this way I was able to test the driver. Changes in v10: https://lore.kernel.org/all/20230328073328.3949796-1-dario.binacchi@amarulasolutions.com - Fix errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'. Fix the "st,can-primary" description removing the "Note:" word that caused the failure. - Slightly change the note text at the top of the driver module. No functional changes. Changes in v9: https://lore.kernel.org/all/20230327201630.3874028-1-dario.binacchi@amarulasolutions.com - Fix commit description formatting. No semantic changes have been made. - Replace master/slave terms with primary/secondary. - Replace master/slave terms with primary/secondary. - Replace master/slave terms with primary/secondary. Changes in v8: https://lore.kernel.org/all/20230326160325.3771891-1-dario.binacchi@amarulasolutions.com - Do not enable the clock in probe and enable/disable it in open/close. - Return IRQ_NONE if no IRQ is active. Changes in v7: https://lore.kernel.org/all/20230116175152.2839455-1-dario.binacchi@amarulasolutions.com - Add Vincent Mailhol's Reviewed-by tag. - Remove all unused macros for reading/writing the controller registers. - Add CAN_ERR_CNT flag to notify availability of error counter. - Move the "break" before the newline in the switch/case statements. - Print the mnemotechnic instead of the error value in each netdev_err(). - Remove the debug print for timings parameter. - Do not copy the data if CAN_RTR_FLAG is set in bxcan_start_xmit(). - Populate ndev->ethtool_ops with the default timestamp info. Changes in v6: https://lore.kernel.org/all/20230109182356.141849-1-dario.binacchi@amarulasolutions.com - move can1 node before gcan to keep ordering by address. Changes in v5: https://lore.kernel.org/all/20221017164231.4192699-1-dario.binacchi@amarulasolutions.com - Add Rob Herring's Acked-by tag. - Add Rob Herring's Reviewed-by tag. - Put static in front of bxcan_enable_filters() definition. Changes in v4: https://lore.kernel.org/all/20220925175209.1528960-1-dario.binacchi@amarulasolutions.com - Remove "st,stm32f4-bxcan-core" compatible. In this way the can nodes (compatible "st,stm32f4-bxcan") are no longer children of a parent node with compatible "st,stm32f4-bxcan-core". - Add the "st,gcan" property (global can memory) to can nodes which references a "syscon" node containing the shared clock and memory addresses. - Replace the node can@40006400 (compatible "st,stm32f4-bxcan-core") with the gcan@40006600 node ("sysnode" compatible). The gcan node contains clocks and memory addresses shared by the two can nodes of which it's no longer the parent. - Add to can nodes the "st,gcan" property (global can memory) which references the gcan@40006600 node ("sysnode compatibble). - Add "dt-bindings: arm: stm32: add compatible for syscon gcan node" patch. - Drop the core driver. Thus bxcan-drv.c has been renamed to bxcan.c and moved to the drivers/net/can folder. The drivers/net/can/bxcan directory has therefore been removed. - Use the regmap_*() functions to access the shared memory registers. - Use spinlock to protect bxcan_rmw(). - Use 1 space, instead of tabs, in the macros definition. - Drop clock ref-counting. - Drop unused code. - Drop the _SHIFT macros and use FIELD_GET()/FIELD_PREP() directly. - Add BXCAN_ prefix to lec error codes. - Add the macro BXCAN_RX_MB_NUM. - Enable time triggered mode and use can_rx_offload(). - Use readx_poll_timeout() in function with timeouts. - Loop from tail to head in bxcan_tx_isr(). - Check bits of tsr register instead of pkts variable in bxcan_tx_isr(). - Don't return from bxcan_handle_state_change() if skb/cf are NULL. - Enable/disable the generation of the bus error interrupt depending on can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING. - Don't return from bxcan_handle_bus_err() if skb is NULL. - Drop statistics updating from bxcan_handle_bus_err(). - Add an empty line in front of 'return IRQ_HANDLED;' - Rename bxcan_start() to bxcan_chip_start(). - Rename bxcan_stop() to bxcan_chip_stop(). - Disable all IRQs in bxcan_chip_stop(). - Rename bxcan_close() to bxcan_ndo_stop(). - Use writel instead of bxcan_rmw() to update the dlc register. Changes in v3: https://lore.kernel.org/all/20220828133329.793324-1-dario.binacchi@amarulasolutions.com - Remove 'Dario Binacchi <dariobin@libero.it>' SOB. - Add description to the parent of the two child nodes. - Move "patterProperties:" after "properties: in top level before "required". - Add "clocks" to the "required:" list of the child nodes. - Remove 'Dario Binacchi <dariobin@libero.it>' SOB. - Add "clocks" to can@0 node. - Remove 'Dario Binacchi <dariobin@libero.it>' SOB. - Remove a blank line. - Remove 'Dario Binacchi <dariobin@libero.it>' SOB. - Fix the documentation file path in the MAINTAINERS entry. - Do not increment the "stats->rx_bytes" if the frame is remote. - Remove pr_debug() call from bxcan_rmw(). Changes in v2: https://lore.kernel.org/all/20220820082936.686924-1-dario.binacchi@amarulasolutions.com - Change the file name into 'st,stm32-bxcan-core.yaml'. - Rename compatibles: - st,stm32-bxcan-core -> st,stm32f4-bxcan-core - st,stm32-bxcan -> st,stm32f4-bxcan - Rename master property to st,can-master. - Remove the status property from the example. - Put the node child properties as required. - Remove a blank line. - Fix sparse errors. - Create a MAINTAINERS entry. - Remove the print of the registers address. - Remove the volatile keyword from bxcan_rmw(). - Use tx ring algorithm to manage tx mailboxes. - Use can_{get|put}_echo_skb(). - Update DT properties. v1: https://lore.kernel.org/all/20220817143529.257908-1-dario.binacchi@amarulasolutions.com Link: https://lore.kernel.org/all/20230328073328.3949796-1-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> |
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.