linux/drivers/input/touchscreen
John Keeping d36d2c35fd Input: st1232 - increase "wait ready" timeout
[ Upstream commit 2667f6b7af ]

I have a ST1633 touch controller which fails to probe due to a timeout
waiting for the controller to become ready.  Increasing the minimum
delay to 100ms ensures that the probe sequence completes successfully.

The ST1633 datasheet says nothing about the maximum delay here and the
ST1232 I2C protocol document says "wait until" with no notion of a
timeout.

Since this only runs once during probe, being generous with the timout
seems reasonable and most likely the device will become ready
eventually.

(It may be worth noting that I saw this issue with a PREEMPT_RT patched
kernel which probably has tighter wakeups from usleep_range() than other
preemption models.)

Fixes: f605be6a57 ("Input: st1232 - wait until device is ready before reading resolution")
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18 19:17:01 +01:00
..
88pm860x-ts.c Input: remove dev_err() usage after platform_get_irq() 2019-08-14 10:49:01 -07:00
ad7877.c Input: ad7877 - use new structure for SPI transfer delays 2020-12-10 23:39:15 -08:00
ad7879-i2c.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 2019-05-30 11:25:18 -07:00
ad7879-spi.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 2019-05-30 11:25:18 -07:00
ad7879.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
ad7879.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 2019-05-30 11:25:18 -07:00
ads7846.c Linux 5.11 2021-02-22 21:21:03 -08:00
ar1021_i2c.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
atmel_mxt_ts.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
auo-pixcir-ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
bcm_iproc_tsc.c Input: remove dev_err() usage after platform_get_irq() 2019-08-14 10:49:01 -07:00
bu21013_ts.c Input: bu21013_ts - switch to using standard touchscreen properties 2019-09-02 09:07:38 -07:00
bu21029_ts.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
chipone_icn8318.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
chipone_icn8505.c Input: icn8505 - Switch to firmware_request_platform for retreiving the fw 2020-03-20 14:57:54 +01:00
colibri-vf50-ts.c Input: colibri-vf50-ts - remove unneeded gpio.h header file 2019-10-27 11:14:22 -07:00
cy8ctma140.c Input: add driver for the Cypress CY8CTMA140 touchscreen 2020-05-09 22:26:48 -07:00
cy8ctmg110_ts.c Input: cy8ctmg110_ts - switch to using gpiod API 2021-06-05 20:34:16 -07:00
cyttsp_core.c Input: cyttsp - remove public header 2021-06-01 21:13:11 -07:00
cyttsp_core.h Input: cyttsp - remove public header 2021-06-01 21:13:11 -07:00
cyttsp_i2c_common.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
cyttsp_i2c.c Input: cyttsp - remove public header 2021-06-01 21:13:11 -07:00
cyttsp_spi.c Input: cyttsp - remove public header 2021-06-01 21:13:11 -07:00
cyttsp4_core.c Input: cyttsp4 - move 'cyttsp4_tch_abs_string' to the only file that references it 2020-11-08 22:35:48 -08:00
cyttsp4_core.h Input: cyttsp4 - move 'cyttsp4_tch_abs_string' to the only file that references it 2020-11-08 22:35:48 -08:00
cyttsp4_i2c.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
cyttsp4_spi.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
da9034-ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
da9052_tsi.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
dynapro.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
edt-ft5x06.c Input: edt-ft5x06 - added case for EDT EP0110M09 2021-09-05 19:10:11 -07:00
eeti_ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
egalax_ts_serial.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
egalax_ts.c Input: egalax_ts - add system wakeup support 2018-09-18 15:28:07 -07:00
ektf2127.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
elants_i2c.c Input: elants_i2c - switch to probe_new 2021-05-30 21:53:50 -07:00
elo.c Input: elo - fix an error code in elo_connect() 2021-02-18 14:39:42 -08:00
exc3000.c Input: exc3000 - add type sysfs attribute 2021-03-07 21:56:50 -08:00
fsl-imx25-tcq.c Input: remove dev_err() usage after platform_get_irq() 2019-08-14 10:49:01 -07:00
fujitsu_ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
goodix.c Input: goodix - platform/x86: touchscreen_dmi - Move upside down quirks to touchscreen_dmi.c 2021-05-20 15:17:07 +02:00
gunze.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
hampshire.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
hideep.c Input: hideep - fix the uninitialized use in hideep_nvm_unlock() 2021-06-19 22:36:28 -07:00
hp680_ts_input.c treewide: Add SPDX license identifier for more missed files 2019-05-21 10:50:45 +02:00
htcpen.c isa: Make the remove callback for isa drivers return void 2021-01-26 07:42:27 +01:00
hycon-hy46xx.c Input: add driver for the Hycon HY46XX touchpanel series 2021-04-13 19:08:30 -07:00
ili210x.c Input: ili210x - add missing negation for touch indication on ili210x 2021-05-06 15:10:20 -07:00
ilitek_ts_i2c.c Input: Add support for ILITEK Lego Series 2021-04-09 23:23:01 -07:00
imx6ul_tsc.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
inexio.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
ipaq-micro-ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
iqs5xx.c Input: iqs5xx - make reset GPIO optional 2021-03-25 11:14:10 -07:00
jornada720_ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
Kconfig Input: Fix spelling mistake in Kconfig "Modul" -> "Module" 2021-09-03 23:49:55 -07:00
lpc32xx_ts.c Input: lpc32xx_ts - convert to use BIT() 2021-03-20 19:48:37 -07:00
mainstone-wm97xx.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
Makefile Input: add driver for the Hycon HY46XX touchpanel series 2021-04-13 19:08:30 -07:00
max11801_ts.c Input: Use fallthrough pseudo-keyword 2020-07-07 11:25:54 -07:00
mc13783_ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
mcs5000_ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
melfas_mip4.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
migor_ts.c Input: migor_ts - convert to SPDX identifiers 2018-11-12 11:52:05 -08:00
mk712.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
mms114.c Input: mms114 - support MMS134S 2021-09-06 23:33:26 -07:00
msg2638.c Input: add MStar MSG2638 touchscreen driver 2021-04-09 23:22:38 -07:00
mtouch.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
mxs-lradc-ts.c Input: mxs-lradc-ts - use devm_platform_ioremap_resource() 2019-07-24 12:48:47 +03:00
pcap_ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
penmount.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
pixcir_i2c_ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
raspberrypi-ts.c input: raspberrypi-ts: Release firmware handle when not needed 2021-03-22 17:59:51 +01:00
raydium_i2c_ts.c Linux 5.11 2021-02-22 21:21:03 -08:00
resistive-adc-touch.c Input: resistive-adc-touch - fix division by zero error on z1 == 0 2021-10-15 22:11:03 -07:00
rohm_bu21023.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 2019-06-05 17:36:37 +02:00
s3c2410_ts.c ARM: s3c: adc: move header to linux/soc/samsung 2020-08-19 21:44:11 +02:00
s6sy761.c Input: s6sy761 - fix coordinate read bit shift 2021-03-07 15:14:25 -08:00
silead.c Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state 2021-04-09 22:42:20 -07:00
sis_i2c.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 2019-06-05 17:36:37 +02:00
st1232.c Input: st1232 - increase "wait ready" timeout 2021-11-18 19:17:01 +01:00
stmfts.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
stmpe-ts.c Input: stmpe-ts - add description for 'prop' struct member 2021-01-19 19:03:18 -08:00
sun4i-ts.c Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register 2020-01-10 14:42:52 -08:00
sur40.c Input: sur40 - fix an error code in sur40_probe() 2021-02-16 20:39:53 -08:00
surface3_spi.c Input: surface3_spi - remove set but unused variable 'timestamp' 2021-01-19 19:03:16 -08:00
sx8654.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
ti_am335x_tsc.c Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev' 2019-02-19 10:38:19 -08:00
touchit213.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
touchright.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
touchwin.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
tps6507x-ts.c Input: tsc6507x-ts - switch to using polled mode of input devices 2019-10-29 17:13:41 -07:00
ts4800-ts.c Input: ts4800-ts - switch to using polled mode of input devices 2019-10-29 17:13:40 -07:00
tsc40.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 315 2019-06-05 17:37:05 +02:00
tsc200x-core.c Input: tsc200x-core - use kobj_to_dev() 2021-06-19 22:36:23 -07:00
tsc200x-core.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
tsc2004.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
tsc2005.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
tsc2007_core.c Input: tsc2007 - make use of device properties 2021-03-15 17:12:04 -07:00
tsc2007_iio.c iio: remove explicit IIO device parent assignment 2020-06-14 11:49:59 +01:00
tsc2007.h Input: tsc2007 - convert to GPIO descriptors 2021-03-15 17:12:02 -07:00
ucb1400_ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
usbtouchscreen.c Input: usbtouchscreen - fix control-request directions 2021-05-24 20:56:11 -07:00
wacom_i2c.c Input: wacom_i2c - switch to using managed resources 2021-03-25 11:14:09 -07:00
wacom_w8001.c Input: wacom_w8001 - allocate additional space for 'phys' 2019-08-20 12:03:46 -07:00
wdt87xx_i2c.c Input: wdt87xx_i2c - replace mdelay() with msleep() in wdt87xx_resume() 2018-07-27 11:59:05 -07:00
wm97xx-core.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
wm831x-ts.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
wm9705.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
wm9712.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
wm9713.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
zet6223.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
zforce_ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
zinitix.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
zylonite-wm97xx.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00