linux/drivers/usb
Badhri Jagan Sridharan 1230868433 usb: typec: tcpm: Honour pSnkStdby requirement during negotiation
>From PD Spec:
The Sink Shall transition to Sink Standby before a positive or
negative voltage transition of VBUS. During Sink Standby
the Sink Shall reduce its power draw to pSnkStdby. This allows
the Source to manage the voltage transition as well as
supply sufficient operating current to the Sink to maintain PD
operation during the transition. The Sink Shall
complete this transition to Sink Standby within tSnkStdby
after evaluating the Accept Message from the Source. The
transition when returning to Sink operation from Sink Standby
Shall be completed within tSnkNewPower. The
pSnkStdby requirement Shall only apply if the Sink power draw
is higher than this level.

The above requirement needs to be met to prevent hard resets
from port partner.

Without the patch: (5V/3A during SNK_DISCOVERY all the way through
explicit contract)
[   95.711984] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[   95.712007] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[   95.712017] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[   95.837190] VBUS on
[   95.882075] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[   95.882082] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS]
[   95.882086] polarity 1
[   95.883151] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0
[   95.883441] enable vbus discharge ret:0
[   95.883445] Requesting mux state 1, usb-role 2, orientation 2
[   95.883776] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
[   95.883879] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS]
[   96.038960] VBUS on
[   96.383939] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms]
[   96.383946] Setting voltage/current limit 5000 mV 3000 mA
[   96.383961] vbus=0 charge:=1
[   96.386044] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
[   96.386309] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS]
[   96.394404] PD RX, header: 0x2161 [1]
[   96.394408]  PDO 0: type 0, 5000 mV, 3000 mA [E]
[   96.394410]  PDO 1: type 0, 9000 mV, 2000 mA []
[   96.394412] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION]
[   96.394416] Setting usb_comm capable false
[   96.395083] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1
[   96.395089] Requesting PDO 1: 9000 mV, 2000 mA
[   96.395093] PD TX, header: 0x1042
[   96.397404] PD TX complete, status: 0
[   96.397424] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION]
[   96.400826] PD RX, header: 0x363 [1]
[   96.400829] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION]
[   96.400832] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION]
[   96.577315] PD RX, header: 0x566 [1]
[   96.577321] Setting voltage/current limit 9000 mV 2000 mA
[   96.578363] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0
[   96.578370] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION]

With the patch:
[  168.398573] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[  168.398605] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[  168.398619] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[  168.522348] VBUS on
[  168.568676] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[  168.568684] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS]
[  168.568688] polarity 1
[  168.569867] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0
[  168.570158] enable vbus discharge ret:0
[  168.570161] Requesting mux state 1, usb-role 2, orientation 2
[  168.570504] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
[  168.570634] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS]
[  169.070689] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms]
[  169.070695] Setting voltage/current limit 5000 mV 3000 mA
[  169.070702] vbus=0 charge:=1
[  169.072719] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
[  169.073145] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS]
[  169.077162] PD RX, header: 0x2161 [1]
[  169.077172]  PDO 0: type 0, 5000 mV, 3000 mA [E]
[  169.077178]  PDO 1: type 0, 9000 mV, 2000 mA []
[  169.077183] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION]
[  169.077191] Setting usb_comm capable false
[  169.077753] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1
[  169.077759] Requesting PDO 1: 9000 mV, 2000 mA
[  169.077762] PD TX, header: 0x1042
[  169.079990] PD TX complete, status: 0
[  169.080013] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION]
[  169.083183] VBUS on
[  169.084195] PD RX, header: 0x363 [1]
[  169.084200] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION]
[  169.084206] Setting standby current 5000 mV @ 500 mA
[  169.084209] Setting voltage/current limit 5000 mV 500 mA
[  169.084220] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION]
[  169.260222] PD RX, header: 0x566 [1]
[  169.260227] Setting voltage/current limit 9000 mV 2000 mA
[  169.261315] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0
[  169.261321] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION]
[  169.261570] AMS POWER_NEGOTIATION finished

Fixes: f0690a25a1 ("staging: typec: USB Type-C Port Manager (tcpm)")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20210414024000.4175263-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14 16:27:29 +02:00
..
atm drivers: usb: atm: use pr_err() and pr_warn() instead of raw printk() 2020-12-09 15:22:51 +01:00
c67x00 usb/c67x00: Replace tasklet with work 2021-01-26 18:36:37 +01:00
cdns3 usb: cdnsp: Fixes issue with Configure Endpoint command 2021-04-12 20:19:23 +08:00
chipidea usb: chipidea: tegra: Silence deferred probe error 2021-03-23 12:50:32 +01:00
class USB: cdc-acm: fix TIOCGSERIAL implementation 2021-04-09 16:08:27 +02:00
common usb: common: move function's kerneldoc next to its definition 2021-03-10 09:37:17 +01:00
core USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 Ethernet 2021-04-14 15:17:53 +02:00
dwc2 usb: dwc2: Add exit clock gating before removing driver 2021-04-13 12:25:12 +02:00
dwc3 usb: dwc3: gadget: Check for disabled LPM quirk 2021-04-14 15:58:33 +02:00
early usb: early: ehci-dbgp: convert to readl_poll_timeout_atomic() 2020-09-25 16:29:09 +02:00
gadget usb: gadget: tegra-xudc: Fix possible use-after-free in tegra_xudc_remove() 2021-04-09 16:02:33 +02:00
host USB:ehci:fix Kunpeng920 ehci hardware problem 2021-04-10 10:45:38 +02:00
image USB: microtek: use set_host_byte() 2020-09-16 12:42:10 +02:00
isp1760 usb: isp1760-hcd: convert to readl_poll_timeout_atomic() 2020-09-25 16:30:05 +02:00
misc usb: misc: usbsevseg: update to use usb_control_msg_send() 2021-03-28 13:41:27 +02:00
mon
mtu3 usb: mtu3: drop CONFIG_OF 2021-03-26 14:47:19 +01:00
musb usb: musb: fix PM reference leak in musb_irq_work() 2021-04-09 16:02:44 +02:00
phy usb: phy: phy-mxs-usb: Use of_device_get_match_data() 2021-01-18 18:35:46 +01:00
renesas_usbhs usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler() 2021-03-23 12:42:15 +01:00
roles usb: roles: Call try_module_get() from usb_role_switch_find_by_fwnode() 2021-04-09 16:07:03 +02:00
serial USB: serial: io_edgeport: fix memory leak in edge_startup 2021-03-09 09:05:37 +01:00
storage usb-storage: Add quirk to defeat Kindle's automatic unload 2021-03-17 21:30:15 +01:00
typec usb: typec: tcpm: Honour pSnkStdby requirement during negotiation 2021-04-14 16:27:29 +02:00
usbip usbip: vudc: fix missing unlock on error in usbip_sockfd_store() 2021-04-12 10:29:50 +02:00
Kconfig
Makefile usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver 2020-12-29 12:36:13 +08:00
usb-skeleton.c