mirror of
https://github.com/torvalds/linux.git
synced 2026-07-28 01:55:51 +02:00
6dc92ba487
Introduce a driver for the networking lanes of the 10G Lynx SerDes block, present on the majority of Layerscape and QorIQ (Freescale/NXP) SoCs. As with the 28G Lynx, the SerDes lanes come pre-initialized out of reset and the consumers use them that way outside the Generic PHY framework (for networking, the static configuration remains for the entire SoC lifetime, whereas for SATA and PCIe, the hardware reconfigures itself automatically for other link speeds). The need for the Generic PHY framework comes specifically for networking use cases where a static lane configuration is not sufficient. For example a network MAC is connected to an SFP cage, where various SFP or SFP+ modules can be connected. Each of them may require a different SerDes protocol (SGMII, 1000Base-X, 10GBase-R), which phylink + sfp-bus are responsible of figuring out. The phylink drivers are: - enetc - felix - dpaa_eth (fman_memac) - dpaa2-eth - dpaa2-switch and they all need to reconfigure the SerDes for the requested link mode, using phy_set_mode_ext() (and phy_validate() to see if it is supported in the first place). Note that SerDes 2 on LS1088A is exclusively non-networking, so there is currently no need for this driver. Therefore we skip matching on its compatible string and do not probe on that device. Co-developed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20260610151952.2141019-16-vladimir.oltean@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|---|---|---|
| .. | ||
| qe | ||
| bman.h | ||
| caam-blob.h | ||
| cpm.h | ||
| dcp.h | ||
| dpaa2-fd.h | ||
| dpaa2-global.h | ||
| dpaa2-io.h | ||
| phy-fsl-lynx.h | ||
| qman.h | ||