mirror of
https://github.com/torvalds/linux.git
synced 2026-10-17 14:30:03 +02:00
Add support for the NXP IW61x wireless devices. The nxpwifi driver implements a full-MAC design and integrates with cfg80211 for configuration and control, supporting both station (STA) and access point (AP) modes. The driver provides a firmware-based command/event interface using TLV messages, with the core handling command processing, event dispatching, and device lifecycle management. A SDIO transport layer is implemented to support IW61x devices. Key features include: - 802.11n/ac/ax (HT/VHT/HE) capability support - Scan, association, and connection management - Data path handling for TX/RX, including aggregation and reorder - WMM QoS support and traffic prioritization - 802.11h (DFS/TPC) support for regulatory compliance - cfg80211 integration for STA and AP operations - Debugfs and ethtool support - Wake-on-LAN support The driver translates cfg80211 configuration into firmware commands and implements required data path processing in software where needed. Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
788 lines
23 KiB
C
788 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* nxpwifi: association and ad-hoc start/join
|
|
*
|
|
* Copyright 2011-2024 NXP
|
|
*/
|
|
|
|
#include "cfg.h"
|
|
#include "util.h"
|
|
#include "fw.h"
|
|
#include "main.h"
|
|
#include "cmdevt.h"
|
|
#include "wmm.h"
|
|
#include "11n.h"
|
|
#include "11ac.h"
|
|
#include "11ax.h"
|
|
|
|
#define CAPINFO_MASK (~(BIT(15) | BIT(14) | BIT(12) | BIT(11) | BIT(9)))
|
|
|
|
/* Append generic IE as pass-through TLV for join */
|
|
static int
|
|
nxpwifi_cmd_append_generic_ie(struct nxpwifi_private *priv, u8 **buffer)
|
|
{
|
|
int ret_len = 0;
|
|
struct nxpwifi_ie_types_header ie_header;
|
|
|
|
/* Null Checks */
|
|
if (!buffer)
|
|
return 0;
|
|
if (!(*buffer))
|
|
return 0;
|
|
|
|
/*
|
|
* If there is a generic element buffer setup, append it to the return
|
|
* parameter buffer pointer.
|
|
*/
|
|
if (priv->gen_ie_buf_len) {
|
|
nxpwifi_dbg(priv->adapter, INFO,
|
|
"info: %s: append generic element len %d to %p\n",
|
|
__func__, priv->gen_ie_buf_len, *buffer);
|
|
|
|
/* Wrap the generic element buffer with a pass through TLV type */
|
|
ie_header.type = cpu_to_le16(TLV_TYPE_PASSTHROUGH);
|
|
ie_header.len = cpu_to_le16(priv->gen_ie_buf_len);
|
|
memcpy(*buffer, &ie_header, sizeof(ie_header));
|
|
|
|
/*
|
|
* Increment the return size and the return buffer pointer
|
|
* param
|
|
*/
|
|
*buffer += sizeof(ie_header);
|
|
ret_len += sizeof(ie_header);
|
|
|
|
/*
|
|
* Copy the generic element buffer to the output buffer, advance
|
|
* pointer
|
|
*/
|
|
memcpy(*buffer, priv->gen_ie_buf, priv->gen_ie_buf_len);
|
|
|
|
/*
|
|
* Increment the return size and the return buffer pointer
|
|
* param
|
|
*/
|
|
*buffer += priv->gen_ie_buf_len;
|
|
ret_len += priv->gen_ie_buf_len;
|
|
|
|
/* Reset the generic element buffer */
|
|
priv->gen_ie_buf_len = 0;
|
|
}
|
|
|
|
/* return the length appended to the buffer */
|
|
return ret_len;
|
|
}
|
|
|
|
/* Append TSF timestamp (AP TSF and local RX TSF) for reassoc */
|
|
static int
|
|
nxpwifi_cmd_append_tsf_tlv(struct nxpwifi_private *priv, u8 **buffer,
|
|
struct nxpwifi_bssdescriptor *bss_desc)
|
|
{
|
|
struct nxpwifi_ie_types_tsf_timestamp tsf_tlv;
|
|
__le64 tsf_val;
|
|
|
|
/* Null Checks */
|
|
if (!buffer)
|
|
return 0;
|
|
if (!*buffer)
|
|
return 0;
|
|
|
|
memset(&tsf_tlv, 0x00, sizeof(struct nxpwifi_ie_types_tsf_timestamp));
|
|
|
|
tsf_tlv.header.type = cpu_to_le16(TLV_TYPE_TSFTIMESTAMP);
|
|
tsf_tlv.header.len = cpu_to_le16(2 * sizeof(tsf_val));
|
|
|
|
memcpy(*buffer, &tsf_tlv, sizeof(tsf_tlv.header));
|
|
*buffer += sizeof(tsf_tlv.header);
|
|
|
|
/* TSF at the time when beacon/probe_response was received */
|
|
tsf_val = cpu_to_le64(bss_desc->fw_tsf);
|
|
memcpy(*buffer, &tsf_val, sizeof(tsf_val));
|
|
*buffer += sizeof(tsf_val);
|
|
|
|
tsf_val = cpu_to_le64(bss_desc->timestamp);
|
|
|
|
nxpwifi_dbg(priv->adapter, INFO,
|
|
"info: %s: TSF offset calc: %016llx - %016llx\n",
|
|
__func__, bss_desc->timestamp, bss_desc->fw_tsf);
|
|
|
|
memcpy(*buffer, &tsf_val, sizeof(tsf_val));
|
|
*buffer += sizeof(tsf_val);
|
|
|
|
return sizeof(tsf_tlv.header) + (2 * sizeof(tsf_val));
|
|
}
|
|
|
|
/* Compute intersection of two rate sets; rate1 updated in-place */
|
|
static int nxpwifi_get_common_rates(struct nxpwifi_private *priv, u8 *rate1,
|
|
u32 rate1_size, u8 *rate2, u32 rate2_size)
|
|
{
|
|
int ret;
|
|
u8 *ptr = rate1, *tmp;
|
|
u32 i, j;
|
|
|
|
tmp = kmemdup(rate1, rate1_size, GFP_KERNEL);
|
|
if (!tmp)
|
|
return -ENOMEM;
|
|
|
|
memset(rate1, 0, rate1_size);
|
|
|
|
for (i = 0; i < rate2_size && rate2[i]; i++) {
|
|
for (j = 0; j < rate1_size && tmp[j]; j++) {
|
|
/*
|
|
* Check common rate, excluding the bit for
|
|
* basic rate
|
|
*/
|
|
if ((rate2[i] & 0x7F) == (tmp[j] & 0x7F)) {
|
|
*rate1++ = tmp[j];
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
nxpwifi_dbg(priv->adapter, INFO, "info: Tx data rate set to %#x\n",
|
|
priv->data_rate);
|
|
|
|
if (!priv->is_data_rate_auto) {
|
|
while (*ptr) {
|
|
if ((*ptr & 0x7f) == priv->data_rate) {
|
|
ret = 0;
|
|
goto done;
|
|
}
|
|
ptr++;
|
|
}
|
|
nxpwifi_dbg(priv->adapter, ERROR,
|
|
"previously set fixed data rate %#x\t"
|
|
"is not compatible with the network\n",
|
|
priv->data_rate);
|
|
|
|
ret = -EPERM;
|
|
goto done;
|
|
}
|
|
|
|
ret = 0;
|
|
done:
|
|
kfree(tmp);
|
|
return ret;
|
|
}
|
|
|
|
/* Build common rates from BSS descriptor into out_rates */
|
|
static int
|
|
nxpwifi_setup_rates_from_bssdesc(struct nxpwifi_private *priv,
|
|
struct nxpwifi_bssdescriptor *bss_desc,
|
|
u8 *out_rates, u32 *out_rates_size)
|
|
{
|
|
u8 card_rates[NXPWIFI_SUPPORTED_RATES];
|
|
u32 card_rates_size;
|
|
int ret;
|
|
|
|
/* Copy AP supported rates */
|
|
memcpy(out_rates, bss_desc->supported_rates, NXPWIFI_SUPPORTED_RATES);
|
|
/* Get the STA supported rates */
|
|
card_rates_size = nxpwifi_get_active_data_rates(priv, card_rates);
|
|
/* Get the common rates between AP and STA supported rates */
|
|
ret = nxpwifi_get_common_rates(priv, out_rates, NXPWIFI_SUPPORTED_RATES,
|
|
card_rates, card_rates_size);
|
|
if (ret) {
|
|
*out_rates_size = 0;
|
|
nxpwifi_dbg(priv->adapter, ERROR,
|
|
"%s: cannot get common rates\n",
|
|
__func__);
|
|
} else {
|
|
*out_rates_size =
|
|
min_t(size_t, strlen(out_rates), NXPWIFI_SUPPORTED_RATES);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Append WPS IE as pass-through TLV for join */
|
|
static int
|
|
nxpwifi_cmd_append_wps_ie(struct nxpwifi_private *priv, u8 **buffer)
|
|
{
|
|
int ret_len = 0;
|
|
struct nxpwifi_ie_types_header ie_header;
|
|
|
|
if (!buffer || !*buffer)
|
|
return 0;
|
|
|
|
/*
|
|
* If there is a wps element buffer setup, append it to the return
|
|
* parameter buffer pointer.
|
|
*/
|
|
if (priv->wps_ie_len) {
|
|
nxpwifi_dbg(priv->adapter, CMD,
|
|
"cmd: append wps element %d to %p\n",
|
|
priv->wps_ie_len, *buffer);
|
|
|
|
/* Wrap the generic element buffer with a pass through TLV type */
|
|
ie_header.type = cpu_to_le16(TLV_TYPE_PASSTHROUGH);
|
|
ie_header.len = cpu_to_le16(priv->wps_ie_len);
|
|
memcpy(*buffer, &ie_header, sizeof(ie_header));
|
|
*buffer += sizeof(ie_header);
|
|
ret_len += sizeof(ie_header);
|
|
|
|
memcpy(*buffer, priv->wps_ie, priv->wps_ie_len);
|
|
*buffer += priv->wps_ie_len;
|
|
ret_len += priv->wps_ie_len;
|
|
}
|
|
|
|
kfree(priv->wps_ie);
|
|
priv->wps_ie_len = 0;
|
|
return ret_len;
|
|
}
|
|
|
|
/* Append WPA/WPA2 RSN IE TLV */
|
|
static int nxpwifi_append_rsn_ie_wpa_wpa2(struct nxpwifi_private *priv,
|
|
u8 **buffer)
|
|
{
|
|
struct nxpwifi_ie_types_rsn_param_set *rsn_ie_tlv;
|
|
int rsn_ie_len;
|
|
|
|
if (!buffer || !(*buffer))
|
|
return 0;
|
|
|
|
rsn_ie_tlv = (struct nxpwifi_ie_types_rsn_param_set *)(*buffer);
|
|
rsn_ie_tlv->header.type = cpu_to_le16((u16)priv->wpa_ie[0]);
|
|
rsn_ie_tlv->header.type =
|
|
cpu_to_le16(le16_to_cpu(rsn_ie_tlv->header.type) & 0x00FF);
|
|
rsn_ie_tlv->header.len = cpu_to_le16((u16)priv->wpa_ie[1]);
|
|
rsn_ie_tlv->header.len = cpu_to_le16(le16_to_cpu(rsn_ie_tlv->header.len)
|
|
& 0x00FF);
|
|
if (le16_to_cpu(rsn_ie_tlv->header.len) <= (sizeof(priv->wpa_ie) - 2))
|
|
memcpy(rsn_ie_tlv->rsn_ie, &priv->wpa_ie[2],
|
|
le16_to_cpu(rsn_ie_tlv->header.len));
|
|
else
|
|
return -ENOMEM;
|
|
|
|
rsn_ie_len = sizeof(rsn_ie_tlv->header) +
|
|
le16_to_cpu(rsn_ie_tlv->header.len);
|
|
*buffer += rsn_ie_len;
|
|
|
|
return rsn_ie_len;
|
|
}
|
|
|
|
/* Build 802.11 association command and required TLVs */
|
|
int nxpwifi_cmd_802_11_associate(struct nxpwifi_private *priv,
|
|
struct host_cmd_ds_command *cmd,
|
|
struct nxpwifi_bssdescriptor *bss_desc)
|
|
{
|
|
struct nxpwifi_adapter *adapter = priv->adapter;
|
|
struct host_cmd_ds_802_11_associate *assoc = &cmd->params.associate;
|
|
struct nxpwifi_ie_types_host_mlme *host_mlme_tlv;
|
|
struct nxpwifi_ie_types_ssid_param_set *ssid_tlv;
|
|
struct nxpwifi_ie_types_phy_param_set *phy_tlv;
|
|
struct nxpwifi_ie_types_ss_param_set *ss_tlv;
|
|
struct nxpwifi_ie_types_rates_param_set *rates_tlv;
|
|
struct nxpwifi_ie_types_auth_type *auth_tlv;
|
|
struct nxpwifi_ie_types_sae_pwe_mode *sae_pwe_tlv;
|
|
struct nxpwifi_ie_types_chan_list_param_set *chan_tlv;
|
|
u8 rates[NXPWIFI_SUPPORTED_RATES];
|
|
u32 rates_size;
|
|
u16 tmp_cap;
|
|
u8 *pos;
|
|
int rsn_ie_len = 0;
|
|
int ret;
|
|
|
|
pos = (u8 *)assoc;
|
|
|
|
cmd->command = cpu_to_le16(HOST_CMD_802_11_ASSOCIATE);
|
|
|
|
/* Save so we know which BSS Desc to use in the response handler */
|
|
priv->attempted_bss_desc = bss_desc;
|
|
|
|
memcpy(assoc->peer_sta_addr,
|
|
bss_desc->mac_address, sizeof(assoc->peer_sta_addr));
|
|
pos += sizeof(assoc->peer_sta_addr);
|
|
|
|
/* Set the listen interval */
|
|
assoc->listen_interval = cpu_to_le16(priv->listen_interval);
|
|
/* Set the beacon period */
|
|
assoc->beacon_period = cpu_to_le16(bss_desc->beacon_period);
|
|
|
|
pos += sizeof(assoc->cap_info_bitmap);
|
|
pos += sizeof(assoc->listen_interval);
|
|
pos += sizeof(assoc->beacon_period);
|
|
pos += sizeof(assoc->dtim_period);
|
|
|
|
host_mlme_tlv = (struct nxpwifi_ie_types_host_mlme *)pos;
|
|
host_mlme_tlv->header.type = cpu_to_le16(TLV_TYPE_HOST_MLME);
|
|
host_mlme_tlv->header.len = cpu_to_le16(sizeof(host_mlme_tlv->host_mlme));
|
|
host_mlme_tlv->host_mlme = 1;
|
|
pos += sizeof(host_mlme_tlv->header) + sizeof(host_mlme_tlv->host_mlme);
|
|
|
|
ssid_tlv = (struct nxpwifi_ie_types_ssid_param_set *)pos;
|
|
ssid_tlv->header.type = cpu_to_le16(WLAN_EID_SSID);
|
|
ssid_tlv->header.len = cpu_to_le16((u16)bss_desc->ssid.ssid_len);
|
|
memcpy(ssid_tlv->ssid, bss_desc->ssid.ssid,
|
|
le16_to_cpu(ssid_tlv->header.len));
|
|
pos += sizeof(ssid_tlv->header) + le16_to_cpu(ssid_tlv->header.len);
|
|
|
|
phy_tlv = (struct nxpwifi_ie_types_phy_param_set *)pos;
|
|
phy_tlv->header.type = cpu_to_le16(WLAN_EID_DS_PARAMS);
|
|
phy_tlv->header.len = cpu_to_le16(sizeof(phy_tlv->fh_ds.ds_param_set));
|
|
memcpy(&phy_tlv->fh_ds.ds_param_set,
|
|
&bss_desc->phy_param_set.ds_param_set.current_chan,
|
|
sizeof(phy_tlv->fh_ds.ds_param_set));
|
|
pos += sizeof(phy_tlv->header) + le16_to_cpu(phy_tlv->header.len);
|
|
|
|
ss_tlv = (struct nxpwifi_ie_types_ss_param_set *)pos;
|
|
ss_tlv->header.type = cpu_to_le16(WLAN_EID_CF_PARAMS);
|
|
ss_tlv->header.len = cpu_to_le16(sizeof(ss_tlv->cf_ibss.cf_param_set));
|
|
pos += sizeof(ss_tlv->header) + le16_to_cpu(ss_tlv->header.len);
|
|
|
|
/* Get the common rates supported between the driver and the BSS Desc */
|
|
ret = nxpwifi_setup_rates_from_bssdesc(priv, bss_desc,
|
|
rates, &rates_size);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Save the data rates into Current BSS state structure */
|
|
priv->curr_bss_params.num_of_rates = rates_size;
|
|
memcpy(&priv->curr_bss_params.data_rates, rates, rates_size);
|
|
|
|
/* Setup the Rates TLV in the association command */
|
|
rates_tlv = (struct nxpwifi_ie_types_rates_param_set *)pos;
|
|
rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES);
|
|
rates_tlv->header.len = cpu_to_le16((u16)rates_size);
|
|
memcpy(rates_tlv->rates, rates, rates_size);
|
|
pos += sizeof(rates_tlv->header) + rates_size;
|
|
nxpwifi_dbg(adapter, INFO, "info: ASSOC_CMD: rates size = %d\n",
|
|
rates_size);
|
|
|
|
/* Add the Authentication type */
|
|
auth_tlv = (struct nxpwifi_ie_types_auth_type *)pos;
|
|
auth_tlv->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE);
|
|
auth_tlv->header.len = cpu_to_le16(sizeof(auth_tlv->auth_type));
|
|
if (priv->sec_info.wep_enabled)
|
|
auth_tlv->auth_type =
|
|
cpu_to_le16((u16)priv->sec_info.authentication_mode);
|
|
else
|
|
auth_tlv->auth_type = cpu_to_le16(NL80211_AUTHTYPE_OPEN_SYSTEM);
|
|
|
|
pos += sizeof(auth_tlv->header) + le16_to_cpu(auth_tlv->header.len);
|
|
|
|
if (priv->sec_info.authentication_mode == WLAN_AUTH_SAE) {
|
|
auth_tlv->auth_type = cpu_to_le16(NXPWIFI_AUTHTYPE_SAE);
|
|
if (bss_desc->bcn_rsnx_ie &&
|
|
bss_desc->bcn_rsnx_ie->datalen &&
|
|
(bss_desc->bcn_rsnx_ie->data[0] &
|
|
WLAN_RSNX_CAPA_SAE_H2E)) {
|
|
sae_pwe_tlv =
|
|
(struct nxpwifi_ie_types_sae_pwe_mode *)pos;
|
|
sae_pwe_tlv->header.type =
|
|
cpu_to_le16(TLV_TYPE_SAE_PWE_MODE);
|
|
sae_pwe_tlv->header.len =
|
|
cpu_to_le16(sizeof(sae_pwe_tlv->pwe[0]));
|
|
sae_pwe_tlv->pwe[0] = bss_desc->bcn_rsnx_ie->data[0];
|
|
pos += sizeof(sae_pwe_tlv->header) +
|
|
sizeof(sae_pwe_tlv->pwe[0]);
|
|
}
|
|
}
|
|
|
|
if (IS_SUPPORT_MULTI_BANDS(adapter) &&
|
|
!(ISSUPP_11NENABLED(adapter->fw_cap_info) &&
|
|
!bss_desc->disable_11n &&
|
|
(priv->config_bands & BAND_GN ||
|
|
priv->config_bands & BAND_AN) &&
|
|
bss_desc->bcn_ht_cap)) {
|
|
/*
|
|
* Append a channel TLV for the channel the attempted AP was
|
|
* found on
|
|
*/
|
|
chan_tlv = (struct nxpwifi_ie_types_chan_list_param_set *)pos;
|
|
chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
|
|
chan_tlv->header.len =
|
|
cpu_to_le16(sizeof(struct nxpwifi_chan_scan_param_set));
|
|
|
|
memset(chan_tlv->chan_scan_param, 0x00,
|
|
sizeof(struct nxpwifi_chan_scan_param_set));
|
|
chan_tlv->chan_scan_param[0].chan_number =
|
|
(bss_desc->phy_param_set.ds_param_set.current_chan);
|
|
nxpwifi_dbg(adapter, INFO, "info: Assoc: TLV Chan = %d\n",
|
|
chan_tlv->chan_scan_param[0].chan_number);
|
|
|
|
chan_tlv->chan_scan_param[0].band_cfg =
|
|
nxpwifi_band_to_radio_type((u8)bss_desc->bss_band);
|
|
|
|
nxpwifi_dbg(adapter, INFO, "info: Assoc: TLV Band = %d\n",
|
|
chan_tlv->chan_scan_param[0].band_cfg);
|
|
pos += sizeof(chan_tlv->header) +
|
|
sizeof(struct nxpwifi_chan_scan_param_set);
|
|
}
|
|
|
|
if (!priv->wps.session_enable) {
|
|
if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled)
|
|
rsn_ie_len = nxpwifi_append_rsn_ie_wpa_wpa2(priv, &pos);
|
|
|
|
if (rsn_ie_len == -ENOMEM)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (ISSUPP_11NENABLED(adapter->fw_cap_info) &&
|
|
!bss_desc->disable_11n &&
|
|
(priv->config_bands & BAND_GN ||
|
|
priv->config_bands & BAND_AN))
|
|
nxpwifi_cmd_append_11n_tlv(priv, bss_desc, &pos);
|
|
|
|
if (ISSUPP_11ACENABLED(adapter->fw_cap_info) &&
|
|
!bss_desc->disable_11n && !bss_desc->disable_11ac &&
|
|
(priv->config_bands & BAND_GAC ||
|
|
priv->config_bands & BAND_AAC))
|
|
nxpwifi_cmd_append_11ac_tlv(priv, bss_desc, &pos);
|
|
|
|
if (ISSUPP_11AXENABLED(adapter->fw_cap_ext) &&
|
|
nxpwifi_11ax_bandconfig_allowed(priv, bss_desc))
|
|
nxpwifi_cmd_append_11ax_tlv(priv, bss_desc, &pos);
|
|
|
|
/* Append vendor specific element TLV */
|
|
nxpwifi_cmd_append_vsie_tlv(priv, NXPWIFI_VSIE_MASK_ASSOC, &pos);
|
|
|
|
nxpwifi_wmm_process_association_req(priv, &pos, &bss_desc->wmm_ie,
|
|
bss_desc->bcn_ht_cap);
|
|
|
|
if (priv->wps.session_enable && priv->wps_ie_len)
|
|
nxpwifi_cmd_append_wps_ie(priv, &pos);
|
|
|
|
nxpwifi_cmd_append_generic_ie(priv, &pos);
|
|
|
|
nxpwifi_cmd_append_tsf_tlv(priv, &pos, bss_desc);
|
|
|
|
nxpwifi_11h_process_join(priv, &pos, bss_desc);
|
|
|
|
cmd->size = cpu_to_le16((u16)(pos - (u8 *)assoc) + S_DS_GEN);
|
|
|
|
/* Set the Capability info at last */
|
|
tmp_cap = bss_desc->cap_info_bitmap;
|
|
|
|
if (priv->config_bands == BAND_B)
|
|
tmp_cap &= ~WLAN_CAPABILITY_SHORT_SLOT_TIME;
|
|
|
|
tmp_cap &= CAPINFO_MASK;
|
|
nxpwifi_dbg(adapter, INFO,
|
|
"info: ASSOC_CMD: tmp_cap=%4X CAPINFO_MASK=%4lX\n",
|
|
tmp_cap, CAPINFO_MASK);
|
|
assoc->cap_info_bitmap = cpu_to_le16(tmp_cap);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const char *assoc_failure_reason_to_str(u16 cap_info)
|
|
{
|
|
switch (cap_info) {
|
|
case CONNECT_ERR_AUTH_ERR_STA_FAILURE:
|
|
return "CONNECT_ERR_AUTH_ERR_STA_FAILURE";
|
|
case CONNECT_ERR_AUTH_MSG_UNHANDLED:
|
|
return "CONNECT_ERR_AUTH_MSG_UNHANDLED";
|
|
case CONNECT_ERR_ASSOC_ERR_TIMEOUT:
|
|
return "CONNECT_ERR_ASSOC_ERR_TIMEOUT";
|
|
case CONNECT_ERR_ASSOC_ERR_AUTH_REFUSED:
|
|
return "CONNECT_ERR_ASSOC_ERR_AUTH_REFUSED";
|
|
case CONNECT_ERR_STA_FAILURE:
|
|
return "CONNECT_ERR_STA_FAILURE";
|
|
}
|
|
|
|
return "Unknown connect failure";
|
|
}
|
|
|
|
/*
|
|
* Handle association command response.
|
|
* Parse cap_info/status_code/AID and copy IEs, update connection state,
|
|
* WMM and HT/HE parameters, queues and filters. On failure, return the
|
|
* IEEE status code or a mapped timeout error.
|
|
*/
|
|
int nxpwifi_ret_802_11_associate(struct nxpwifi_private *priv,
|
|
struct host_cmd_ds_command *resp)
|
|
{
|
|
struct nxpwifi_adapter *adapter = priv->adapter;
|
|
int ret = 0;
|
|
struct ieee_types_assoc_rsp *assoc_rsp;
|
|
struct nxpwifi_bssdescriptor *bss_desc;
|
|
bool enable_data = true;
|
|
u16 cap_info, status_code, aid;
|
|
const u8 *ie_ptr;
|
|
struct ieee80211_ht_operation *assoc_resp_ht_oper;
|
|
struct ieee80211_mgmt *hdr;
|
|
|
|
if (!priv->attempted_bss_desc) {
|
|
nxpwifi_dbg(adapter, ERROR,
|
|
"%s: failed, association terminated by host\n",
|
|
__func__);
|
|
goto done;
|
|
}
|
|
|
|
hdr = (struct ieee80211_mgmt *)&resp->params;
|
|
if (!memcmp(hdr->bssid, priv->attempted_bss_desc->mac_address,
|
|
ETH_ALEN))
|
|
assoc_rsp = (struct ieee_types_assoc_rsp *)&hdr->u.assoc_resp;
|
|
else
|
|
assoc_rsp = (struct ieee_types_assoc_rsp *)&resp->params;
|
|
|
|
cap_info = le16_to_cpu(assoc_rsp->cap_info_bitmap);
|
|
status_code = le16_to_cpu(assoc_rsp->status_code);
|
|
aid = le16_to_cpu(assoc_rsp->a_id);
|
|
|
|
if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
|
|
nxpwifi_dbg(adapter, ERROR,
|
|
"invalid AID value 0x%x; bits 15:14 not set\n", aid);
|
|
|
|
aid &= ~(BIT(15) | BIT(14));
|
|
|
|
priv->assoc_rsp_size = min(le16_to_cpu(resp->size) - S_DS_GEN,
|
|
sizeof(priv->assoc_rsp_buf));
|
|
|
|
assoc_rsp->a_id = cpu_to_le16(aid);
|
|
memcpy(priv->assoc_rsp_buf, &resp->params, priv->assoc_rsp_size);
|
|
|
|
if (status_code) {
|
|
adapter->dbg.num_cmd_assoc_failure++;
|
|
nxpwifi_dbg(adapter, ERROR,
|
|
"ASSOC_RESP: failed,\t"
|
|
"status code=%d err=%#x a_id=%#x\n",
|
|
status_code, cap_info,
|
|
le16_to_cpu(assoc_rsp->a_id));
|
|
|
|
nxpwifi_dbg(adapter, ERROR, "assoc failure: reason %s\n",
|
|
assoc_failure_reason_to_str(cap_info));
|
|
if (cap_info == CONNECT_ERR_ASSOC_ERR_TIMEOUT) {
|
|
if (status_code == NXPWIFI_ASSOC_CMD_FAILURE_AUTH) {
|
|
ret = WLAN_STATUS_AUTH_TIMEOUT;
|
|
nxpwifi_dbg(adapter, ERROR,
|
|
"ASSOC_RESP: AUTH timeout\n");
|
|
} else {
|
|
ret = WLAN_STATUS_UNSPECIFIED_FAILURE;
|
|
nxpwifi_dbg(adapter, ERROR,
|
|
"ASSOC_RESP: UNSPECIFIED failure\n");
|
|
}
|
|
|
|
priv->assoc_rsp_size = 0;
|
|
} else {
|
|
ret = status_code;
|
|
}
|
|
|
|
goto done;
|
|
}
|
|
|
|
/* Send a Media Connected event, according to the Spec */
|
|
priv->media_connected = true;
|
|
|
|
adapter->ps_state = PS_STATE_AWAKE;
|
|
adapter->pps_uapsd_mode = false;
|
|
adapter->tx_lock_flag = false;
|
|
|
|
/* Set the attempted BSSID Index to current */
|
|
bss_desc = priv->attempted_bss_desc;
|
|
|
|
nxpwifi_dbg(adapter, INFO, "info: ASSOC_RESP: %s\n",
|
|
bss_desc->ssid.ssid);
|
|
|
|
/* Make a copy of current BSSID descriptor */
|
|
memcpy(&priv->curr_bss_params.bss_descriptor,
|
|
bss_desc, sizeof(struct nxpwifi_bssdescriptor));
|
|
|
|
/* Update curr_bss_params */
|
|
priv->curr_bss_params.bss_descriptor.channel =
|
|
bss_desc->phy_param_set.ds_param_set.current_chan;
|
|
|
|
priv->curr_bss_params.band = (u8)bss_desc->bss_band;
|
|
|
|
if (bss_desc->wmm_ie.element_id == WLAN_EID_VENDOR_SPECIFIC)
|
|
priv->curr_bss_params.wmm_enabled = true;
|
|
else
|
|
priv->curr_bss_params.wmm_enabled = false;
|
|
|
|
if ((priv->wmm_required || bss_desc->bcn_ht_cap) &&
|
|
priv->curr_bss_params.wmm_enabled)
|
|
priv->wmm_enabled = true;
|
|
else
|
|
priv->wmm_enabled = false;
|
|
|
|
priv->curr_bss_params.wmm_uapsd_enabled = false;
|
|
|
|
priv->curr_bss_params.wmm_uapsd_enabled = priv->wmm_enabled &&
|
|
(bss_desc->wmm_ie.qos_info & IEEE80211_WMM_IE_AP_QOSINFO_UAPSD);
|
|
|
|
/* Store the bandwidth information from assoc response */
|
|
ie_ptr = cfg80211_find_ie(WLAN_EID_HT_OPERATION, assoc_rsp->ie_buffer,
|
|
priv->assoc_rsp_size
|
|
- sizeof(struct ieee_types_assoc_rsp));
|
|
if (ie_ptr) {
|
|
assoc_resp_ht_oper = (struct ieee80211_ht_operation *)(ie_ptr
|
|
+ sizeof(struct element));
|
|
priv->assoc_resp_ht_param = assoc_resp_ht_oper->ht_param;
|
|
priv->ht_param_present = true;
|
|
} else {
|
|
priv->ht_param_present = false;
|
|
}
|
|
|
|
nxpwifi_dbg(adapter, INFO,
|
|
"info: ASSOC_RESP: curr_pkt_filter is %#x\n",
|
|
priv->curr_pkt_filter);
|
|
if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled)
|
|
priv->wpa_is_gtk_set = false;
|
|
|
|
if (priv->wmm_enabled) {
|
|
/* Don't re-enable carrier until we get the WMM_GET_STATUS event */
|
|
enable_data = false;
|
|
} else {
|
|
/* Since WMM is not enabled, setup the queues with the defaults */
|
|
nxpwifi_wmm_setup_queue_priorities(priv, NULL);
|
|
nxpwifi_wmm_setup_ac_downgrade(priv);
|
|
}
|
|
|
|
if (enable_data)
|
|
nxpwifi_dbg(adapter, INFO,
|
|
"info: post association, re-enabling data flow\n");
|
|
|
|
/* Reset SNR/NF/RSSI values */
|
|
priv->data_rssi_last = 0;
|
|
priv->data_nf_last = 0;
|
|
priv->data_rssi_avg = 0;
|
|
priv->data_nf_avg = 0;
|
|
priv->bcn_rssi_last = 0;
|
|
priv->bcn_nf_last = 0;
|
|
priv->bcn_rssi_avg = 0;
|
|
priv->bcn_nf_avg = 0;
|
|
priv->rxpd_rate = 0;
|
|
priv->rxpd_htinfo = 0;
|
|
|
|
nxpwifi_save_curr_bcn(priv);
|
|
|
|
adapter->dbg.num_cmd_assoc_success++;
|
|
|
|
nxpwifi_dbg(adapter, MSG, "assoc: associated with %pM\n",
|
|
priv->attempted_bss_desc->mac_address);
|
|
|
|
/* Add the ra_list here for infra mode as there will be only 1 ra always */
|
|
nxpwifi_ralist_add(priv,
|
|
priv->curr_bss_params.bss_descriptor.mac_address);
|
|
|
|
netif_carrier_on(priv->netdev);
|
|
nxpwifi_wake_up_net_dev_queue(priv->netdev, adapter);
|
|
|
|
if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled)
|
|
priv->scan_block = true;
|
|
else
|
|
priv->port_open = true;
|
|
|
|
done:
|
|
/* Need to indicate IOCTL complete */
|
|
if (adapter->curr_cmd->wait_q_enabled) {
|
|
if (ret)
|
|
adapter->cmd_wait_q.status = -1;
|
|
else
|
|
adapter->cmd_wait_q.status = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Associate to the specified BSS (STA only) */
|
|
int nxpwifi_associate(struct nxpwifi_private *priv,
|
|
struct nxpwifi_bssdescriptor *bss_desc)
|
|
{
|
|
/*
|
|
* Return error if the adapter is not STA role or table entry
|
|
* is not marked as infra.
|
|
*/
|
|
if ((GET_BSS_ROLE(priv) != NXPWIFI_BSS_ROLE_STA) ||
|
|
bss_desc->bss_mode != NL80211_IFTYPE_STATION)
|
|
return -EINVAL;
|
|
|
|
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) &&
|
|
!bss_desc->disable_11n && !bss_desc->disable_11ac &&
|
|
priv->config_bands & BAND_AAC)
|
|
nxpwifi_set_11ac_ba_params(priv);
|
|
else
|
|
nxpwifi_set_ba_params(priv);
|
|
|
|
/*
|
|
* Clear any past association response stored for application
|
|
* retrieval
|
|
*/
|
|
priv->assoc_rsp_size = 0;
|
|
|
|
return nxpwifi_send_cmd(priv, HOST_CMD_802_11_ASSOCIATE,
|
|
HOST_ACT_GEN_SET, 0, bss_desc, true);
|
|
}
|
|
|
|
/* Send deauth to disconnect from an infrastructure BSS */
|
|
static int nxpwifi_deauthenticate_infra(struct nxpwifi_private *priv, u8 *mac)
|
|
{
|
|
u8 mac_address[ETH_ALEN];
|
|
int ret;
|
|
|
|
if (!mac || is_zero_ether_addr(mac))
|
|
memcpy(mac_address,
|
|
priv->curr_bss_params.bss_descriptor.mac_address,
|
|
ETH_ALEN);
|
|
else
|
|
memcpy(mac_address, mac, ETH_ALEN);
|
|
|
|
ret = nxpwifi_send_cmd(priv, HOST_CMD_802_11_DEAUTHENTICATE,
|
|
HOST_ACT_GEN_SET, 0, mac_address, true);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Disconnect from the current BSS (STA/P2P/AP) */
|
|
int nxpwifi_deauthenticate(struct nxpwifi_private *priv, u8 *mac)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (!priv->media_connected)
|
|
return 0;
|
|
|
|
priv->auth_flag = 0;
|
|
priv->auth_alg = WLAN_AUTH_NONE;
|
|
priv->host_mlme_reg = false;
|
|
priv->mgmt_frame_mask = 0;
|
|
|
|
ret = nxpwifi_send_cmd(priv, HOST_CMD_MGMT_FRAME_REG,
|
|
HOST_ACT_GEN_SET, 0,
|
|
&priv->mgmt_frame_mask, false);
|
|
if (ret) {
|
|
nxpwifi_dbg(priv->adapter, ERROR,
|
|
"could not unregister mgmt frame rx\n");
|
|
return ret;
|
|
}
|
|
|
|
switch (priv->bss_mode) {
|
|
case NL80211_IFTYPE_STATION:
|
|
ret = nxpwifi_deauthenticate_infra(priv, mac);
|
|
if (ret)
|
|
cfg80211_disconnected(priv->netdev, 0, NULL, 0,
|
|
true, GFP_KERNEL);
|
|
break;
|
|
case NL80211_IFTYPE_AP:
|
|
ret = nxpwifi_send_cmd(priv, HOST_CMD_UAP_BSS_STOP,
|
|
HOST_ACT_GEN_SET, 0, NULL, true);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Deauthenticate/disconnect from all BSS. */
|
|
void nxpwifi_deauthenticate_all(struct nxpwifi_adapter *adapter)
|
|
{
|
|
struct nxpwifi_private *priv;
|
|
int i;
|
|
|
|
for (i = 0; i < adapter->priv_num; i++) {
|
|
priv = adapter->priv[i];
|
|
nxpwifi_deauthenticate(priv, NULL);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(nxpwifi_deauthenticate_all);
|
|
|
|
/* Convert band to radio type used in channel TLV. */
|
|
u8 nxpwifi_band_to_radio_type(u16 config_bands)
|
|
{
|
|
if (config_bands & BAND_A || config_bands & BAND_AN ||
|
|
config_bands & BAND_AAC || config_bands & BAND_AAX)
|
|
return HOST_SCAN_RADIO_TYPE_A;
|
|
|
|
return HOST_SCAN_RADIO_TYPE_BG;
|
|
}
|