github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-09-23 22:14:03 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph
master
linux/drivers/iio/adc/ad4691.c
Uwe Kleine-König (The Capable Hub) 995832b2ce Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files) 
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.

Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
2026-07-03 07:38:17 +02:00

2084 lines
62 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2024-2026 Analog Devices, Inc.
* Author: Radu Sabau <radu.sabau@analog.com>
*/
#include <linux/array_size.h>
#include <linux/bitfield.h>
#include <linux/bitmap.h>
#include <linux/cleanup.h>
#include <linux/delay.h>
#include <linux/dev_printk.h>
#include <linux/device/devres.h>
#include <linux/dmaengine.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/kstrtox.h>
#include <linux/limits.h>
#include <linux/math.h>
#include <linux/module.h>
#include <linux/property.h>
#include <linux/pwm.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/string.h>
#include <linux/spi/spi.h>
#include <linux/spi/offload/consumer.h>
#include <linux/spi/offload/provider.h>
#include <linux/types.h>
#include <linux/units.h>
#include <linux/unaligned.h>
#include <linux/iio/buffer.h>
#include <linux/iio/buffer-dma.h>
#include <linux/iio/buffer-dmaengine.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#define AD4691_VREF_uV_MIN 2400000
#define AD4691_VREF_uV_MAX 5250000
#define AD4691_VREF_2P5_uV_MAX 2750000
#define AD4691_VREF_3P0_uV_MAX 3250000
#define AD4691_VREF_3P3_uV_MAX 3750000
#define AD4691_VREF_4P096_uV_MAX 4500000
#define AD4691_CNV_DUTY_CYCLE_NS 380
#define AD4691_CNV_HIGH_TIME_NS 430
/*
* Conservative default for the manual offload periodic trigger. Low enough
* to work safely out of the box across all OSR and channel count combinations.
*/
#define AD4691_OFFLOAD_INITIAL_TRIGGER_HZ (100 * HZ_PER_KHZ)
#define AD4691_SPI_CONFIG_A_REG 0x000
#define AD4691_SW_RESET (BIT(7) | BIT(0))
#define AD4691_STATUS_REG 0x014
#define AD4691_CLAMP_STATUS1_REG 0x01A
#define AD4691_CLAMP_STATUS2_REG 0x01B
#define AD4691_DEVICE_SETUP 0x020
#define AD4691_MANUAL_MODE BIT(2)
#define AD4691_LDO_EN BIT(4)
#define AD4691_REF_CTRL 0x021
#define AD4691_REF_CTRL_MASK GENMASK(4, 2)
#define AD4691_REFBUF_EN BIT(0)
#define AD4691_OSC_FREQ_REG 0x023
#define AD4691_OSC_FREQ_MASK GENMASK(3, 0)
#define AD4691_STD_SEQ_CONFIG 0x025
#define AD4691_SEQ_ALL_CHANNELS_OFF 0x00
#define AD4691_SPARE_CONTROL 0x02A
#define AD4691_MAX_CHANNELS 16
#define AD4691_NOOP 0x00
#define AD4691_ADC_CHAN(ch) ((0x10 + (ch)) << 3)
#define AD4691_EXIT_COMMAND 0x5000
#define AD4691_OSC_EN_REG 0x180
#define AD4691_STATE_RESET_REG 0x181
#define AD4691_STATE_RESET_ALL BIT(0)
#define AD4691_ADC_SETUP 0x182
#define AD4691_ADC_MODE_MASK GENMASK(1, 0)
#define AD4691_CNV_BURST_MODE 0x01
#define AD4691_AUTONOMOUS_MODE 0x02
/*
* ACC_MASK_REG covers both mask bytes via ADDR_DESCENDING SPI: writing a
* 16-bit BE value to 0x185 auto-decrements to 0x184 for the second byte.
*/
#define AD4691_ACC_MASK_REG 0x185
#define AD4691_ACC_DEPTH_IN(n) (0x186 + (n))
#define AD4691_GPIO_MODE1_REG 0x196
#define AD4691_GPIO_MODE2_REG 0x197
#define AD4691_GP_MODE_MASK GENMASK(3, 0)
#define AD4691_GP_MODE_DATA_READY 0x06
#define AD4691_GPIO_READ 0x1A0
#define AD4691_ACC_STATUS_FULL1_REG 0x1B0
#define AD4691_ACC_STATUS_FULL2_REG 0x1B1
#define AD4691_ACC_STATUS_OVERRUN1_REG 0x1B2
#define AD4691_ACC_STATUS_OVERRUN2_REG 0x1B3
#define AD4691_ACC_STATUS_SAT1_REG 0x1B4
#define AD4691_ACC_STATUS_SAT2_REG 0x1BE
#define AD4691_ACC_SAT_OVR_REG(n) (0x1C0 + (n))
#define AD4691_AVG_IN(n) (0x201 + (2 * (n)))
#define AD4691_AVG_STS_IN(n) (0x222 + (3 * (n)))
#define AD4691_ACC_IN(n) (0x252 + (3 * (n)))
#define AD4691_ACC_STS_DATA(n) (0x283 + (4 * (n)))
static const char * const ad4691_supplies[] = { "avdd", "vio" };
enum ad4691_ref_ctrl {
AD4691_VREF_2P5,
AD4691_VREF_3P0,
AD4691_VREF_3P3,
AD4691_VREF_4P096,
AD4691_VREF_5P0
};
struct ad4691_channel_info {
const struct iio_chan_spec *channels __counted_by_ptr(num_channels);
const struct iio_chan_spec *manual_channels __counted_by_ptr(num_channels);
unsigned int num_channels;
};
struct ad4691_chip_info {
const char *name;
unsigned int max_rate;
const struct ad4691_channel_info *sw_info;
const struct ad4691_channel_info *offload_info;
};
/* CNV burst mode channel — exposes oversampling ratio. */
#define AD4691_CHANNEL(ch) \
{ \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) \
| BIT(IIO_CHAN_INFO_SAMP_FREQ) \
| BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.info_mask_shared_by_all_available = \
BIT(IIO_CHAN_INFO_SAMP_FREQ) \
| BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.channel = ch, \
.scan_index = ch, \
.scan_type = { \
.format = 'u', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_BE, \
}, \
}
/*
* Manual mode channel — no oversampling ratio attribute. OSR is not
* supported in manual mode; ACC_DEPTH_IN is not configured during manual
* buffer enable.
*/
#define AD4691_MANUAL_CHANNEL(ch) \
{ \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) \
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.info_mask_shared_by_all_available = \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.channel = ch, \
.scan_index = ch, \
.scan_type = { \
.format = 'u', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_BE, \
}, \
}
/*
* Offload path (bits_per_word=16): the SPI Engine assembles received
* bits into native 16-bit words before DMA, so samples are in
* CPU-native byte order (IIO_CPU). storagebits=16 matches the 16-bit
* DMA word size.
*
* CNV burst offload configures ACC_DEPTH_IN per channel, so the
* oversampling_ratio attribute is exposed. Manual offload does not;
* use AD4691_OFFLOAD_MANUAL_CHANNEL for that path.
*/
#define AD4691_OFFLOAD_CHANNEL(ch) \
{ \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) \
| BIT(IIO_CHAN_INFO_SAMP_FREQ) \
| BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.info_mask_shared_by_all_available = \
BIT(IIO_CHAN_INFO_SAMP_FREQ) \
| BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.channel = ch, \
.scan_index = ch, \
.scan_type = { \
.format = 'u', \
.realbits = 16, \
.storagebits = 16, \
}, \
}
/* Manual offload — same IIO_CPU layout but no oversampling_ratio attribute. */
#define AD4691_OFFLOAD_MANUAL_CHANNEL(ch) \
{ \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) \
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.info_mask_shared_by_all_available = \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.channel = ch, \
.scan_index = ch, \
.scan_type = { \
.format = 'u', \
.realbits = 16, \
.storagebits = 16, \
}, \
}
static const struct iio_chan_spec ad4691_channels[] = {
AD4691_CHANNEL(0),
AD4691_CHANNEL(1),
AD4691_CHANNEL(2),
AD4691_CHANNEL(3),
AD4691_CHANNEL(4),
AD4691_CHANNEL(5),
AD4691_CHANNEL(6),
AD4691_CHANNEL(7),
AD4691_CHANNEL(8),
AD4691_CHANNEL(9),
AD4691_CHANNEL(10),
AD4691_CHANNEL(11),
AD4691_CHANNEL(12),
AD4691_CHANNEL(13),
AD4691_CHANNEL(14),
AD4691_CHANNEL(15),
IIO_CHAN_SOFT_TIMESTAMP(16),
};
static const struct iio_chan_spec ad4693_channels[] = {
AD4691_CHANNEL(0),
AD4691_CHANNEL(1),
AD4691_CHANNEL(2),
AD4691_CHANNEL(3),
AD4691_CHANNEL(4),
AD4691_CHANNEL(5),
AD4691_CHANNEL(6),
AD4691_CHANNEL(7),
IIO_CHAN_SOFT_TIMESTAMP(8),
};
/*
* Offload channel arrays: no IIO_CHAN_SOFT_TIMESTAMP because DMA delivers
* data directly to userspace without a software timestamp.
*/
static const struct iio_chan_spec ad4691_offload_channels[] = {
AD4691_OFFLOAD_CHANNEL(0),
AD4691_OFFLOAD_CHANNEL(1),
AD4691_OFFLOAD_CHANNEL(2),
AD4691_OFFLOAD_CHANNEL(3),
AD4691_OFFLOAD_CHANNEL(4),
AD4691_OFFLOAD_CHANNEL(5),
AD4691_OFFLOAD_CHANNEL(6),
AD4691_OFFLOAD_CHANNEL(7),
AD4691_OFFLOAD_CHANNEL(8),
AD4691_OFFLOAD_CHANNEL(9),
AD4691_OFFLOAD_CHANNEL(10),
AD4691_OFFLOAD_CHANNEL(11),
AD4691_OFFLOAD_CHANNEL(12),
AD4691_OFFLOAD_CHANNEL(13),
AD4691_OFFLOAD_CHANNEL(14),
AD4691_OFFLOAD_CHANNEL(15),
};
static const struct iio_chan_spec ad4693_offload_channels[] = {
AD4691_OFFLOAD_CHANNEL(0),
AD4691_OFFLOAD_CHANNEL(1),
AD4691_OFFLOAD_CHANNEL(2),
AD4691_OFFLOAD_CHANNEL(3),
AD4691_OFFLOAD_CHANNEL(4),
AD4691_OFFLOAD_CHANNEL(5),
AD4691_OFFLOAD_CHANNEL(6),
AD4691_OFFLOAD_CHANNEL(7),
};
static const struct iio_chan_spec ad4691_manual_channels[] = {
AD4691_MANUAL_CHANNEL(0),
AD4691_MANUAL_CHANNEL(1),
AD4691_MANUAL_CHANNEL(2),
AD4691_MANUAL_CHANNEL(3),
AD4691_MANUAL_CHANNEL(4),
AD4691_MANUAL_CHANNEL(5),
AD4691_MANUAL_CHANNEL(6),
AD4691_MANUAL_CHANNEL(7),
AD4691_MANUAL_CHANNEL(8),
AD4691_MANUAL_CHANNEL(9),
AD4691_MANUAL_CHANNEL(10),
AD4691_MANUAL_CHANNEL(11),
AD4691_MANUAL_CHANNEL(12),
AD4691_MANUAL_CHANNEL(13),
AD4691_MANUAL_CHANNEL(14),
AD4691_MANUAL_CHANNEL(15),
IIO_CHAN_SOFT_TIMESTAMP(16),
};
static const struct iio_chan_spec ad4693_manual_channels[] = {
AD4691_MANUAL_CHANNEL(0),
AD4691_MANUAL_CHANNEL(1),
AD4691_MANUAL_CHANNEL(2),
AD4691_MANUAL_CHANNEL(3),
AD4691_MANUAL_CHANNEL(4),
AD4691_MANUAL_CHANNEL(5),
AD4691_MANUAL_CHANNEL(6),
AD4691_MANUAL_CHANNEL(7),
IIO_CHAN_SOFT_TIMESTAMP(8),
};
static const struct iio_chan_spec ad4691_offload_manual_channels[] = {
AD4691_OFFLOAD_MANUAL_CHANNEL(0),
AD4691_OFFLOAD_MANUAL_CHANNEL(1),
AD4691_OFFLOAD_MANUAL_CHANNEL(2),
AD4691_OFFLOAD_MANUAL_CHANNEL(3),
AD4691_OFFLOAD_MANUAL_CHANNEL(4),
AD4691_OFFLOAD_MANUAL_CHANNEL(5),
AD4691_OFFLOAD_MANUAL_CHANNEL(6),
AD4691_OFFLOAD_MANUAL_CHANNEL(7),
AD4691_OFFLOAD_MANUAL_CHANNEL(8),
AD4691_OFFLOAD_MANUAL_CHANNEL(9),
AD4691_OFFLOAD_MANUAL_CHANNEL(10),
AD4691_OFFLOAD_MANUAL_CHANNEL(11),
AD4691_OFFLOAD_MANUAL_CHANNEL(12),
AD4691_OFFLOAD_MANUAL_CHANNEL(13),
AD4691_OFFLOAD_MANUAL_CHANNEL(14),
AD4691_OFFLOAD_MANUAL_CHANNEL(15),
};
static const struct iio_chan_spec ad4693_offload_manual_channels[] = {
AD4691_OFFLOAD_MANUAL_CHANNEL(0),
AD4691_OFFLOAD_MANUAL_CHANNEL(1),
AD4691_OFFLOAD_MANUAL_CHANNEL(2),
AD4691_OFFLOAD_MANUAL_CHANNEL(3),
AD4691_OFFLOAD_MANUAL_CHANNEL(4),
AD4691_OFFLOAD_MANUAL_CHANNEL(5),
AD4691_OFFLOAD_MANUAL_CHANNEL(6),
AD4691_OFFLOAD_MANUAL_CHANNEL(7),
};
static const int ad4691_oversampling_ratios[] = { 1, 2, 4, 8, 16, 32 };
static const struct ad4691_channel_info ad4691_sw_info = {
.channels = ad4691_channels,
.manual_channels = ad4691_manual_channels,
.num_channels = ARRAY_SIZE(ad4691_channels),
};
static const struct ad4691_channel_info ad4693_sw_info = {
.channels = ad4693_channels,
.manual_channels = ad4693_manual_channels,
.num_channels = ARRAY_SIZE(ad4693_channels),
};
static const struct ad4691_channel_info ad4691_offload_info = {
.channels = ad4691_offload_channels,
.manual_channels = ad4691_offload_manual_channels,
.num_channels = ARRAY_SIZE(ad4691_offload_channels),
};
static const struct ad4691_channel_info ad4693_offload_info = {
.channels = ad4693_offload_channels,
.manual_channels = ad4693_offload_manual_channels,
.num_channels = ARRAY_SIZE(ad4693_offload_channels),
};
/*
* Internal oscillator frequency table. Index is the OSC_FREQ_REG[3:0] value.
* Index 0 (1 MHz) is only valid for AD4692/AD4694; AD4691/AD4693 support
* up to 500 kHz and use index 1 as their highest valid rate.
*/
static const int ad4691_osc_freqs_Hz[] = {
[0x0] = 1000000,
[0x1] = 500000,
[0x2] = 400000,
[0x3] = 250000,
[0x4] = 200000,
[0x5] = 167000,
[0x6] = 133000,
[0x7] = 125000,
[0x8] = 100000,
[0x9] = 50000,
[0xA] = 25000,
[0xB] = 12500,
[0xC] = 10000,
[0xD] = 5000,
[0xE] = 2500,
[0xF] = 1250,
};
static const char * const ad4691_gp_names[] = { "gp0", "gp1", "gp2", "gp3" };
static const struct ad4691_chip_info ad4691_chip_info = {
.name = "ad4691",
.max_rate = 500 * HZ_PER_KHZ,
.sw_info = &ad4691_sw_info,
.offload_info = &ad4691_offload_info,
};
static const struct ad4691_chip_info ad4692_chip_info = {
.name = "ad4692",
.max_rate = 1 * HZ_PER_MHZ,
.sw_info = &ad4691_sw_info,
.offload_info = &ad4691_offload_info,
};
static const struct ad4691_chip_info ad4693_chip_info = {
.name = "ad4693",
.max_rate = 500 * HZ_PER_KHZ,
.sw_info = &ad4693_sw_info,
.offload_info = &ad4693_offload_info,
};
static const struct ad4691_chip_info ad4694_chip_info = {
.name = "ad4694",
.max_rate = 1 * HZ_PER_MHZ,
.sw_info = &ad4693_sw_info,
.offload_info = &ad4693_offload_info,
};
struct ad4691_state {
const struct ad4691_chip_info *info;
struct regmap *regmap;
struct spi_device *spi;
struct pwm_device *conv_trigger;
int irq;
int vref_uV;
u32 cnv_period_ns;
/*
* Snapped oscillator frequency (Hz) shared by all channels. Set when
* sampling_frequency or oversampling_ratio is written; written to
* OSC_FREQ_REG at buffer enable and single-shot time so both attributes
* can be set in any order. Reading in_voltage_sampling_frequency
* returns target_osc_freq_Hz / osr — the effective rate given the
* shared oversampling ratio.
*/
u32 target_osc_freq_Hz;
/* Shared oversampling ratio across all channels; always 1 in manual mode. */
unsigned int osr;
/*
* Precomputed effective-rate lists, one row per entry in
* ad4691_oversampling_ratios[]. Populated at probe; read_avail picks
* the row for the current shared OSR. The tables are stable after
* probe so returning a pointer into them from read_avail is race-free.
*/
int samp_freq_avail[ARRAY_SIZE(ad4691_oversampling_ratios)][ARRAY_SIZE(ad4691_osc_freqs_Hz)];
int samp_freq_avail_len[ARRAY_SIZE(ad4691_oversampling_ratios)];
bool manual_mode;
bool irq_enabled;
bool refbuf_en;
bool ldo_en;
/*
* Synchronize access to members of the driver state, and ensure
* atomicity of consecutive SPI operations.
*/
struct mutex lock;
/* NULL when no SPI offload hardware is present. */
struct spi_offload *offload;
struct spi_offload_trigger *offload_trigger;
u64 trigger_hz;
/*
* Per-buffer-enable lifetime resources:
* Manual Mode - a pre-built SPI message that clocks out N+1
* transfers in one go.
* CNV Burst Mode - a pre-built SPI message that clocks out 2*N
* transfers in one go.
*/
struct spi_message scan_msg;
/*
* max 16 + 1 NOOP (manual) or 2*16 + 1 state-reset (CNV burst).
*/
struct spi_transfer scan_xfers[34];
/*
* CNV burst: 16 AVG_IN addresses = 16. Manual: 16 channel cmds +
* 1 NOOP = 17. Stored as native u16. The non-offload path fills slots
* with put_unaligned_be16() (bits_per_word=8, bytes go out in memory
* order). The offload path assigns native values directly
* (bits_per_word=bpw, SPI reads each slot as a native 16-bit word and
* shifts it out MSB-first).
*/
u16 scan_tx[17] __aligned(IIO_DMA_MINALIGN);
/*
* CNV burst state-reset: 4-byte write [addr_hi, addr_lo,
* STATE_RESET_ALL, OSC_EN=1]. CS is asserted throughout, so
* ADDR_DESCENDING writes byte[3]=1 to OSC_EN_REG (0x180) as a
* deliberate side-write, keeping the oscillator enabled. Shared
* with the offload path (mutually exclusive at probe).
*/
u8 scan_tx_reset[4] __aligned(IIO_DMA_MINALIGN);
/*
* Scan buffer: one BE16 slot per active channel, plus timestamp.
* DMA-aligned because scan_xfers point rx_buf directly into vals[].
*/
IIO_DECLARE_DMA_BUFFER_WITH_TS(__be16, vals, 16);
};
/*
* Configure the given GP pin (0-3) as DATA_READY output.
* GP0/GP1 → GPIO_MODE1_REG, GP2/GP3 → GPIO_MODE2_REG.
* Even pins occupy bits [3:0], odd pins bits [7:4].
*/
static int ad4691_gpio_setup(struct ad4691_state *st, unsigned int gp_num)
{
unsigned int bit_off = gp_num % 2;
unsigned int reg_off = gp_num / 2;
unsigned int shift = 4 * bit_off;
return regmap_update_bits(st->regmap,
AD4691_GPIO_MODE1_REG + reg_off,
AD4691_GP_MODE_MASK << shift,
AD4691_GP_MODE_DATA_READY << shift);
}
static const struct spi_offload_config ad4691_offload_config = {
.capability_flags = SPI_OFFLOAD_CAP_TRIGGER |
SPI_OFFLOAD_CAP_RX_STREAM_DMA,
};
static bool ad4691_offload_trigger_match(struct spi_offload_trigger *trigger,
enum spi_offload_trigger_type type,
u64 *args, u32 nargs)
{
return type == SPI_OFFLOAD_TRIGGER_DATA_READY && nargs == 1 && args[0] <= 3;
}
static int ad4691_offload_trigger_request(struct spi_offload_trigger *trigger,
enum spi_offload_trigger_type type,
u64 *args, u32 nargs)
{
struct ad4691_state *st = spi_offload_trigger_get_priv(trigger);
if (nargs != 1 || args[0] > 3)
return -EINVAL;
return ad4691_gpio_setup(st, args[0]);
}
static int ad4691_offload_trigger_validate(struct spi_offload_trigger *trigger,
struct spi_offload_trigger_config *config)
{
if (config->type != SPI_OFFLOAD_TRIGGER_DATA_READY)
return -EINVAL;
return 0;
}
static const struct spi_offload_trigger_ops ad4691_offload_trigger_ops = {
.match = ad4691_offload_trigger_match,
.request = ad4691_offload_trigger_request,
.validate = ad4691_offload_trigger_validate,
};
static int ad4691_reg_read(void *context, unsigned int reg, unsigned int *val)
{
struct spi_device *spi = context;
u8 tx[2], rx[4];
int ret;
/* Set bit 15 to mark the operation as READ. */
put_unaligned_be16(0x8000 | reg, tx);
switch (reg) {
case 0 ... AD4691_OSC_FREQ_REG:
case AD4691_SPARE_CONTROL ... AD4691_ACC_MASK_REG - 1:
case AD4691_ACC_MASK_REG + 1 ... AD4691_ACC_SAT_OVR_REG(15):
ret = spi_write_then_read(spi, tx, sizeof(tx), rx, 1);
if (ret)
return ret;
*val = rx[0];
return 0;
case AD4691_ACC_MASK_REG:
case AD4691_STD_SEQ_CONFIG:
case AD4691_AVG_IN(0) ... AD4691_AVG_IN(15):
ret = spi_write_then_read(spi, tx, sizeof(tx), rx, 2);
if (ret)
return ret;
*val = get_unaligned_be16(rx);
return 0;
case AD4691_AVG_STS_IN(0) ... AD4691_AVG_STS_IN(15):
case AD4691_ACC_IN(0) ... AD4691_ACC_IN(15):
ret = spi_write_then_read(spi, tx, sizeof(tx), rx, 3);
if (ret)
return ret;
*val = get_unaligned_be24(rx);
return 0;
case AD4691_ACC_STS_DATA(0) ... AD4691_ACC_STS_DATA(15):
ret = spi_write_then_read(spi, tx, sizeof(tx), rx, 4);
if (ret)
return ret;
*val = get_unaligned_be32(rx);
return 0;
default:
return -EINVAL;
}
}
static int ad4691_reg_write(void *context, unsigned int reg, unsigned int val)
{
struct spi_device *spi = context;
u8 tx[4];
put_unaligned_be16(reg, tx);
switch (reg) {
case 0 ... AD4691_OSC_FREQ_REG:
case AD4691_SPARE_CONTROL ... AD4691_ACC_MASK_REG - 1:
case AD4691_ACC_MASK_REG + 1 ... AD4691_GPIO_MODE2_REG:
if (val > U8_MAX)
return -EINVAL;
tx[2] = val;
return spi_write_then_read(spi, tx, 3, NULL, 0);
case AD4691_ACC_MASK_REG:
case AD4691_STD_SEQ_CONFIG:
if (val > U16_MAX)
return -EINVAL;
put_unaligned_be16(val, &tx[2]);
return spi_write_then_read(spi, tx, 4, NULL, 0);
default:
return -EINVAL;
}
}
static bool ad4691_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case AD4691_STATUS_REG:
case AD4691_CLAMP_STATUS1_REG:
case AD4691_CLAMP_STATUS2_REG:
case AD4691_GPIO_READ:
case AD4691_ACC_STATUS_FULL1_REG ... AD4691_ACC_STATUS_SAT2_REG:
case AD4691_ACC_SAT_OVR_REG(0) ... AD4691_ACC_SAT_OVR_REG(15):
case AD4691_AVG_IN(0) ... AD4691_AVG_IN(15):
case AD4691_AVG_STS_IN(0) ... AD4691_AVG_STS_IN(15):
case AD4691_ACC_IN(0) ... AD4691_ACC_IN(15):
case AD4691_ACC_STS_DATA(0) ... AD4691_ACC_STS_DATA(15):
return true;
default:
return false;
}
}
static bool ad4691_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case 0 ... AD4691_OSC_FREQ_REG:
case AD4691_SPARE_CONTROL ... AD4691_ACC_SAT_OVR_REG(15):
case AD4691_STD_SEQ_CONFIG:
return true;
default:
break;
}
/*
* Multi-byte result registers have non-unit strides; only the base
* address of each entry is a valid single-register read.
*/
if (reg >= AD4691_AVG_IN(0) && reg <= AD4691_AVG_IN(15))
return (reg - AD4691_AVG_IN(0)) % 2 == 0;
if (reg >= AD4691_AVG_STS_IN(0) && reg <= AD4691_AVG_STS_IN(15))
return (reg - AD4691_AVG_STS_IN(0)) % 3 == 0;
if (reg >= AD4691_ACC_IN(0) && reg <= AD4691_ACC_IN(15))
return (reg - AD4691_ACC_IN(0)) % 3 == 0;
if (reg >= AD4691_ACC_STS_DATA(0) && reg <= AD4691_ACC_STS_DATA(15))
return (reg - AD4691_ACC_STS_DATA(0)) % 4 == 0;
return false;
}
static bool ad4691_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case 0 ... AD4691_OSC_FREQ_REG:
case AD4691_STD_SEQ_CONFIG:
case AD4691_SPARE_CONTROL ... AD4691_GPIO_MODE2_REG:
return true;
default:
return false;
}
}
static const struct regmap_config ad4691_regmap_config = {
.reg_bits = 16,
.val_bits = 32,
.reg_read = ad4691_reg_read,
.reg_write = ad4691_reg_write,
.volatile_reg = ad4691_volatile_reg,
.readable_reg = ad4691_readable_reg,
.writeable_reg = ad4691_writeable_reg,
.max_register = AD4691_ACC_STS_DATA(15),
.cache_type = REGCACHE_MAPLE,
};
/*
* Index 0 in ad4691_osc_freqs_Hz is 1 MHz — valid only for AD4692/AD4694
* (max_rate == 1 MHz). AD4691/AD4693 cap at 500 kHz so their valid range
* starts at index 1.
*/
static unsigned int ad4691_samp_freq_start(const struct ad4691_chip_info *info)
{
return (info->max_rate == 1 * HZ_PER_MHZ) ? 0 : 1;
}
/*
* Find the largest oscillator table entry that is both <= needed_osc and
* evenly divisible by osr (guaranteeing an integer effective rate on
* read-back). Returns 0 if no such entry exists in the chip's valid range.
*/
static unsigned int ad4691_find_osc_freq(struct ad4691_state *st,
unsigned int needed_osc,
unsigned int osr)
{
unsigned int start = ad4691_samp_freq_start(st->info);
for (unsigned int i = start; i < ARRAY_SIZE(ad4691_osc_freqs_Hz); i++) {
if ((unsigned int)ad4691_osc_freqs_Hz[i] > needed_osc)
continue;
if (ad4691_osc_freqs_Hz[i] % osr)
continue;
return ad4691_osc_freqs_Hz[i];
}
return 0;
}
/* Write target_osc_freq_Hz to OSC_FREQ_REG. Called at use time. */
static int ad4691_write_osc_freq(struct ad4691_state *st)
{
for (unsigned int i = 0; i < ARRAY_SIZE(ad4691_osc_freqs_Hz); i++) {
if (ad4691_osc_freqs_Hz[i] == st->target_osc_freq_Hz)
return regmap_write(st->regmap, AD4691_OSC_FREQ_REG, i);
}
return -EINVAL;
}
/* Return the index of osr in ad4691_oversampling_ratios[], defaulting to 0. */
static unsigned int ad4691_osr_index(unsigned int osr)
{
for (unsigned int i = 0; i < ARRAY_SIZE(ad4691_oversampling_ratios) - 1; i++) {
if ((unsigned int)ad4691_oversampling_ratios[i] == osr)
return i;
}
return ARRAY_SIZE(ad4691_oversampling_ratios) - 1;
}
/*
* Precompute samp_freq_avail[][]: for each OSR value, list the oscillator
* table entries that divide evenly by that OSR, expressed as effective rates
* (osc_freq / osr). Called once at probe after st->info is set.
*/
static void ad4691_precompute_samp_freq_avail(struct ad4691_state *st)
{
unsigned int start = ad4691_samp_freq_start(st->info);
for (unsigned int i = 0; i < ARRAY_SIZE(ad4691_oversampling_ratios); i++) {
unsigned int osr = ad4691_oversampling_ratios[i];
int n = 0;
for (unsigned int j = start; j < ARRAY_SIZE(ad4691_osc_freqs_Hz); j++) {
if (ad4691_osc_freqs_Hz[j] % osr)
continue;
st->samp_freq_avail[i][n++] = ad4691_osc_freqs_Hz[j] / osr;
}
st->samp_freq_avail_len[i] = n;
}
}
static int ad4691_set_sampling_freq(struct ad4691_state *st, int freq)
{
unsigned int osr, found;
/*
* Read osr under st->lock: osr and target_osc_freq_Hz are modified
* together under the lock; reading after acquiring it ensures we see
* a consistent snapshot with no concurrent write racing us.
*/
guard(mutex)(&st->lock);
osr = st->osr;
if (freq <= 0 || (unsigned int)freq > st->info->max_rate / osr)
return -EINVAL;
found = ad4691_find_osc_freq(st, (unsigned int)freq * osr, osr);
if (!found)
return -EINVAL;
/*
* Store the snapped oscillator frequency; OSC_FREQ_REG is written at
* buffer enable and single-shot time so that sampling_frequency and
* oversampling_ratio can be set in any order.
*/
st->target_osc_freq_Hz = found;
return 0;
}
static int ad4691_read_avail(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
const int **vals, int *type,
int *length, long mask)
{
struct ad4691_state *st = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ: {
unsigned int osr_idx;
/*
* The precomputed tables are stable after probe; only the
* current OSR needs to be read under the lock to pick the
* right row atomically.
*/
guard(mutex)(&st->lock);
osr_idx = ad4691_osr_index(st->osr);
*vals = st->samp_freq_avail[osr_idx];
*type = IIO_VAL_INT;
*length = st->samp_freq_avail_len[osr_idx];
return IIO_AVAIL_LIST;
}
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
*vals = ad4691_oversampling_ratios;
*type = IIO_VAL_INT;
*length = ARRAY_SIZE(ad4691_oversampling_ratios);
return IIO_AVAIL_LIST;
default:
return -EINVAL;
}
}
static int ad4691_single_shot_read(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val)
{
struct ad4691_state *st = iio_priv(indio_dev);
unsigned int reg_val, period_us;
int ret;
guard(mutex)(&st->lock);
/* Use AUTONOMOUS mode for single-shot reads. */
ret = regmap_write(st->regmap, AD4691_STATE_RESET_REG, AD4691_STATE_RESET_ALL);
if (ret)
return ret;
ret = regmap_write(st->regmap, AD4691_STD_SEQ_CONFIG,
BIT(chan->channel));
if (ret)
return ret;
ret = regmap_write(st->regmap, AD4691_ACC_MASK_REG,
~BIT(chan->channel) & GENMASK(15, 0));
if (ret)
return ret;
ret = regmap_write(st->regmap, AD4691_ACC_DEPTH_IN(0), st->osr);
if (ret)
return ret;
ret = ad4691_write_osc_freq(st);
if (ret)
return ret;
ret = regmap_write(st->regmap, AD4691_OSC_EN_REG, 1);
if (ret)
return ret;
/*
* Wait osr + 1 oscillator periods: osr for accumulation, +1 for the
* pipeline margin (one extra period ensures the final result is ready).
*/
period_us = DIV_ROUND_UP((st->osr + 1) * USEC_PER_SEC,
st->target_osc_freq_Hz);
fsleep(period_us);
ret = regmap_write(st->regmap, AD4691_OSC_EN_REG, 0);
if (ret)
return ret;
ret = regmap_read(st->regmap, AD4691_AVG_IN(chan->channel), &reg_val);
if (ret)
return ret;
*val = reg_val;
ret = regmap_write(st->regmap, AD4691_STATE_RESET_REG, AD4691_STATE_RESET_ALL);
if (ret)
return ret;
return IIO_VAL_INT;
}
static int ad4691_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long info)
{
struct ad4691_state *st = iio_priv(indio_dev);
switch (info) {
case IIO_CHAN_INFO_RAW: {
IIO_DEV_ACQUIRE_DIRECT_MODE(indio_dev, claim);
if (IIO_DEV_ACQUIRE_FAILED(claim))
return -EBUSY;
return ad4691_single_shot_read(indio_dev, chan, val);
}
case IIO_CHAN_INFO_SAMP_FREQ: {
/*
* Read target_osc_freq_Hz and osr under st->lock to get a
* consistent snapshot: write_raw for SAMP_FREQ or OSR modifies
* both fields under the lock, so a concurrent read without the
* lock could observe a new oscillator frequency with the old OSR.
*/
guard(mutex)(&st->lock);
*val = st->target_osc_freq_Hz / st->osr;
return IIO_VAL_INT;
}
case IIO_CHAN_INFO_OVERSAMPLING_RATIO: {
guard(mutex)(&st->lock);
*val = st->osr;
return IIO_VAL_INT;
}
case IIO_CHAN_INFO_SCALE:
*val = st->vref_uV / (MICRO / MILLI);
*val2 = chan->scan_type.realbits;
return IIO_VAL_FRACTIONAL_LOG2;
default:
return -EINVAL;
}
}
static int ad4691_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct ad4691_state *st = iio_priv(indio_dev);
IIO_DEV_ACQUIRE_DIRECT_MODE(indio_dev, claim);
if (IIO_DEV_ACQUIRE_FAILED(claim))
return -EBUSY;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
return ad4691_set_sampling_freq(st, val);
case IIO_CHAN_INFO_OVERSAMPLING_RATIO: {
unsigned int old_effective, found, osr_idx;
osr_idx = ad4691_osr_index(val);
if (ad4691_oversampling_ratios[osr_idx] != val)
return -EINVAL;
/*
* Hold st->lock while computing the new oscillator frequency
* and updating both target_osc_freq_Hz and osr atomically:
* read_raw for SAMP_FREQ reads both fields under the lock and
* must see a consistent pair (new osc ↔ new osr).
*
* Snap target_osc_freq_Hz to the largest table entry that is
* both <= old_effective * new_osr and evenly divisible by
* new_osr, preserving an integer read-back of
* in_voltage_sampling_frequency after the OSR change.
*/
guard(mutex)(&st->lock);
old_effective = st->target_osc_freq_Hz / st->osr;
found = ad4691_find_osc_freq(st, old_effective * (unsigned int)val, val);
if (!found)
return -EINVAL;
st->target_osc_freq_Hz = found;
st->osr = val;
return 0;
}
default:
return -EINVAL;
}
}
static int ad4691_reg_access(struct iio_dev *indio_dev, unsigned int reg,
unsigned int writeval, unsigned int *readval)
{
struct ad4691_state *st = iio_priv(indio_dev);
guard(mutex)(&st->lock);
if (readval)
return regmap_read(st->regmap, reg, readval);
return regmap_write(st->regmap, reg, writeval);
}
static int ad4691_set_pwm_freq(struct ad4691_state *st, unsigned int freq)
{
if (!freq)
return -EINVAL;
st->cnv_period_ns = DIV_ROUND_UP(NSEC_PER_SEC, freq);
return 0;
}
static int ad4691_sampling_enable(struct ad4691_state *st, bool enable)
{
struct pwm_state conv_state = {
.period = st->cnv_period_ns,
.duty_cycle = AD4691_CNV_DUTY_CYCLE_NS,
.polarity = PWM_POLARITY_NORMAL,
.enabled = enable,
};
return pwm_apply_might_sleep(st->conv_trigger, &conv_state);
}
/*
* ad4691_enter_conversion_mode - Switch the chip to its buffer conversion mode.
*
* Configures the ADC hardware registers for the mode selected at probe
* (CNV_BURST or MANUAL). Called from buffer preenable before starting
* sampling. The chip is in AUTONOMOUS mode during idle (for read_raw).
*/
static int ad4691_enter_conversion_mode(struct ad4691_state *st)
{
int ret;
if (st->manual_mode)
return regmap_update_bits(st->regmap, AD4691_DEVICE_SETUP,
AD4691_MANUAL_MODE, AD4691_MANUAL_MODE);
ret = ad4691_write_osc_freq(st);
if (ret)
return ret;
ret = regmap_update_bits(st->regmap, AD4691_ADC_SETUP,
AD4691_ADC_MODE_MASK, AD4691_CNV_BURST_MODE);
if (ret)
return ret;
return regmap_write(st->regmap, AD4691_STATE_RESET_REG,
AD4691_STATE_RESET_ALL);
}
static int ad4691_transfer(struct ad4691_state *st, u16 cmd)
{
u8 buf[2];
put_unaligned_be16(cmd, buf);
return spi_write_then_read(st->spi, buf, sizeof(buf), NULL, 0);
}
/*
* ad4691_exit_conversion_mode - Return the chip to AUTONOMOUS mode.
*
* Called from buffer postdisable to restore the chip to the
* idle state used by read_raw. Clears the sequencer and resets state.
*/
static int ad4691_exit_conversion_mode(struct ad4691_state *st)
{
if (st->manual_mode)
return ad4691_transfer(st, AD4691_EXIT_COMMAND);
return regmap_update_bits(st->regmap, AD4691_ADC_SETUP,
AD4691_ADC_MODE_MASK, AD4691_AUTONOMOUS_MODE);
}
static int ad4691_manual_buffer_preenable(struct iio_dev *indio_dev)
{
struct ad4691_state *st = iio_priv(indio_dev);
unsigned int k, i;
int ret;
memset(st->scan_xfers, 0, sizeof(st->scan_xfers));
memset(st->scan_tx, 0, sizeof(st->scan_tx));
spi_message_init(&st->scan_msg);
k = 0;
iio_for_each_active_channel(indio_dev, i) {
/*
* Channel-select command occupies the first (high) byte of the
* 16-bit DIN frame; the second byte is a don't-care zero pad.
* put_unaligned_be16() writes [cmd, 0x00] in memory so the
* SPI controller sends the command byte first on the wire.
*/
put_unaligned_be16((u16)(AD4691_ADC_CHAN(i) << 8), &st->scan_tx[k]);
st->scan_xfers[k].tx_buf = &st->scan_tx[k];
/*
* The pipeline means xfer[0] receives the residual from the
* previous sequence, not a valid sample. Discard it (rx_buf=NULL)
* to avoid aliasing vals[0] across two concurrent DMA mappings.
* xfer[1] (or the NOOP when only one channel is active) writes
* the real ch[0] result to vals[0]. Subsequent transfers write
* into vals[k-1] so each result lands at the next dense slot.
*/
st->scan_xfers[k].rx_buf = (k == 0) ? NULL : &st->vals[k - 1];
st->scan_xfers[k].len = sizeof(*st->scan_tx);
st->scan_xfers[k].cs_change = 1;
st->scan_xfers[k].cs_change_delay.value = AD4691_CNV_HIGH_TIME_NS;
st->scan_xfers[k].cs_change_delay.unit = SPI_DELAY_UNIT_NSECS;
spi_message_add_tail(&st->scan_xfers[k], &st->scan_msg);
k++;
}
/* Final NOOP transfer retrieves the last channel's result. */
st->scan_xfers[k].tx_buf = &st->scan_tx[k]; /* scan_tx[k] == 0 == NOOP */
st->scan_xfers[k].rx_buf = &st->vals[k - 1];
st->scan_xfers[k].len = sizeof(*st->scan_tx);
spi_message_add_tail(&st->scan_xfers[k], &st->scan_msg);
ret = spi_optimize_message(st->spi, &st->scan_msg);
if (ret)
return ret;
ret = ad4691_enter_conversion_mode(st);
if (ret) {
spi_unoptimize_message(&st->scan_msg);
return ret;
}
return 0;
}
static int ad4691_manual_buffer_postdisable(struct iio_dev *indio_dev)
{
struct ad4691_state *st = iio_priv(indio_dev);
int ret;
ret = ad4691_exit_conversion_mode(st);
spi_unoptimize_message(&st->scan_msg);
return ret;
}
static const struct iio_buffer_setup_ops ad4691_manual_buffer_setup_ops = {
.preenable = ad4691_manual_buffer_preenable,
.postdisable = ad4691_manual_buffer_postdisable,
};
static int ad4691_cnv_burst_buffer_preenable(struct iio_dev *indio_dev)
{
struct ad4691_state *st = iio_priv(indio_dev);
unsigned int acc_mask, std_seq_config;
unsigned int k, i;
int ret;
memset(st->scan_xfers, 0, sizeof(st->scan_xfers));
memset(st->scan_tx, 0, sizeof(st->scan_tx));
spi_message_init(&st->scan_msg);
/*
* Each AVG_IN read needs two transfers: a 2-byte address write phase
* followed by a 2-byte data read phase. CS toggles between channels
* (cs_change=1 on the read phase of all but the last channel).
*/
k = 0;
iio_for_each_active_channel(indio_dev, i) {
put_unaligned_be16(0x8000 | AD4691_AVG_IN(i), &st->scan_tx[k]);
st->scan_xfers[2 * k].tx_buf = &st->scan_tx[k];
st->scan_xfers[2 * k].len = sizeof(*st->scan_tx);
spi_message_add_tail(&st->scan_xfers[2 * k], &st->scan_msg);
st->scan_xfers[2 * k + 1].rx_buf = &st->vals[k];
st->scan_xfers[2 * k + 1].len = sizeof(*st->scan_tx);
st->scan_xfers[2 * k + 1].cs_change = 1;
spi_message_add_tail(&st->scan_xfers[2 * k + 1], &st->scan_msg);
k++;
}
/*
* Append a 4-byte state-reset transfer [addr_hi, addr_lo,
* STATE_RESET_ALL, OSC_EN=1]. CS is asserted throughout, so
* ADDR_DESCENDING writes byte[3]=1 to OSC_EN_REG (0x180) as a
* deliberate side-write, keeping the oscillator enabled.
* STATE_RESET_ALL starts the next burst; the hardware does not
* accumulate new conversions until after a STATE_RESET pulse, so
* no in-progress data is lost. No cs_change here — CS must
* deassert normally at end of message to frame the next command.
*/
put_unaligned_be16(AD4691_STATE_RESET_REG, st->scan_tx_reset);
st->scan_tx_reset[2] = AD4691_STATE_RESET_ALL;
st->scan_tx_reset[3] = 1;
st->scan_xfers[2 * k].tx_buf = st->scan_tx_reset;
st->scan_xfers[2 * k].len = sizeof(st->scan_tx_reset);
spi_message_add_tail(&st->scan_xfers[2 * k], &st->scan_msg);
ret = spi_optimize_message(st->spi, &st->scan_msg);
if (ret)
return ret;
std_seq_config = bitmap_read(indio_dev->active_scan_mask, 0,
iio_get_masklength(indio_dev)) & GENMASK(15, 0);
ret = regmap_write(st->regmap, AD4691_STD_SEQ_CONFIG, std_seq_config);
if (ret)
goto err_unoptimize;
acc_mask = ~std_seq_config & GENMASK(15, 0);
ret = regmap_write(st->regmap, AD4691_ACC_MASK_REG, acc_mask);
if (ret)
goto err_unoptimize;
ret = regmap_write(st->regmap, AD4691_ACC_DEPTH_IN(0), st->osr);
if (ret)
goto err_unoptimize;
ret = ad4691_enter_conversion_mode(st);
if (ret)
goto err_unoptimize;
return 0;
err_unoptimize:
spi_unoptimize_message(&st->scan_msg);
return ret;
}
static int ad4691_cnv_burst_buffer_postenable(struct iio_dev *indio_dev)
{
struct ad4691_state *st = iio_priv(indio_dev);
int ret;
/*
* Start the PWM and unmask the IRQ here in postenable, not in
* preenable. The IIO core attaches the trigger poll function between
* preenable and postenable; enabling sampling or unmasking the IRQ
* before that point risks a DATA_READY assertion landing before the
* poll function is registered. iio_trigger_poll() would drop the
* event, disable_irq_nosync() would fire, and enable_irq() would
* never be called, leaving the IRQ permanently masked.
*/
ret = ad4691_sampling_enable(st, true);
if (ret)
return ret;
enable_irq(st->irq);
st->irq_enabled = true;
return 0;
}
static int ad4691_cnv_burst_buffer_predisable(struct iio_dev *indio_dev)
{
struct ad4691_state *st = iio_priv(indio_dev);
if (st->irq_enabled) {
disable_irq(st->irq);
st->irq_enabled = false;
}
return ad4691_sampling_enable(st, false);
}
static int ad4691_cnv_burst_buffer_postdisable(struct iio_dev *indio_dev)
{
struct ad4691_state *st = iio_priv(indio_dev);
int ret;
ret = ad4691_exit_conversion_mode(st);
spi_unoptimize_message(&st->scan_msg);
return ret;
}
static const struct iio_buffer_setup_ops ad4691_cnv_burst_buffer_setup_ops = {
.preenable = ad4691_cnv_burst_buffer_preenable,
.postenable = ad4691_cnv_burst_buffer_postenable,
.predisable = ad4691_cnv_burst_buffer_predisable,
.postdisable = ad4691_cnv_burst_buffer_postdisable,
};
static int ad4691_manual_offload_buffer_postenable(struct iio_dev *indio_dev)
{
struct ad4691_state *st = iio_priv(indio_dev);
struct device *dev = regmap_get_device(st->regmap);
struct spi_device *spi = to_spi_device(dev);
struct spi_offload_trigger_config config = {
.type = SPI_OFFLOAD_TRIGGER_PERIODIC,
};
unsigned int bpw = indio_dev->channels[0].scan_type.realbits;
unsigned int bit, k;
int ret;
ret = ad4691_enter_conversion_mode(st);
if (ret)
return ret;
memset(st->scan_xfers, 0, sizeof(st->scan_xfers));
memset(st->scan_tx, 0, sizeof(st->scan_tx));
/*
* N+1 transfers for N channels. Each CS-low period triggers
* a conversion AND returns the previous result (pipelined).
* TX: [AD4691_ADC_CHAN(n), 0x00]
* RX: [data_hi, data_lo] (storagebits=16, shift=0)
* Transfer 0 RX is garbage; transfers 1..N carry real data.
* scan_tx is reused for TX commands (mutually exclusive with the
* non-offload triggered-buffer path).
*
* bits_per_word=bpw: the SPI controller reads tx_buf as a native
* 16-bit word and shifts it out MSB-first. Store the exact 16-bit
* value we want on the wire as a plain native u16 — no endianness
* macro — so the wire bytes are correct on both LE and BE hosts.
* The channel-select command is a single byte; shift it to the MSB
* position so SPI sends it first, with a zero pad in the LSB.
*/
k = 0;
iio_for_each_active_channel(indio_dev, bit) {
st->scan_tx[k] = AD4691_ADC_CHAN(bit) << 8;
st->scan_xfers[k].tx_buf = &st->scan_tx[k];
st->scan_xfers[k].len = sizeof(*st->scan_tx);
st->scan_xfers[k].bits_per_word = bpw;
st->scan_xfers[k].cs_change = 1;
st->scan_xfers[k].cs_change_delay.value = AD4691_CNV_HIGH_TIME_NS;
st->scan_xfers[k].cs_change_delay.unit = SPI_DELAY_UNIT_NSECS;
/* First transfer RX is garbage — skip it. */
if (k > 0)
st->scan_xfers[k].offload_flags = SPI_OFFLOAD_XFER_RX_STREAM;
k++;
}
/* Final NOOP transfer retrieves the last channel's result. */
st->scan_xfers[k].tx_buf = &st->scan_tx[k]; /* scan_tx[k] == 0 == NOOP */
st->scan_xfers[k].len = sizeof(*st->scan_tx);
st->scan_xfers[k].bits_per_word = bpw;
st->scan_xfers[k].offload_flags = SPI_OFFLOAD_XFER_RX_STREAM;
k++;
spi_message_init_with_transfers(&st->scan_msg, st->scan_xfers, k);
st->scan_msg.offload = st->offload;
ret = spi_optimize_message(spi, &st->scan_msg);
if (ret)
goto err_exit_conversion;
config.periodic.frequency_hz = st->trigger_hz;
ret = spi_offload_trigger_enable(st->offload, st->offload_trigger, &config);
if (ret)
goto err_unoptimize;
return 0;
err_unoptimize:
spi_unoptimize_message(&st->scan_msg);
err_exit_conversion:
ad4691_exit_conversion_mode(st);
return ret;
}
static int ad4691_manual_offload_buffer_predisable(struct iio_dev *indio_dev)
{
struct ad4691_state *st = iio_priv(indio_dev);
spi_offload_trigger_disable(st->offload, st->offload_trigger);
spi_unoptimize_message(&st->scan_msg);
return ad4691_exit_conversion_mode(st);
}
static const struct iio_buffer_setup_ops ad4691_manual_offload_buffer_setup_ops = {
.postenable = ad4691_manual_offload_buffer_postenable,
.predisable = ad4691_manual_offload_buffer_predisable,
};
static int ad4691_cnv_burst_offload_buffer_postenable(struct iio_dev *indio_dev)
{
struct ad4691_state *st = iio_priv(indio_dev);
struct device *dev = regmap_get_device(st->regmap);
struct spi_device *spi = to_spi_device(dev);
struct spi_offload_trigger_config config = {
.type = SPI_OFFLOAD_TRIGGER_DATA_READY,
};
unsigned int bpw = indio_dev->channels[0].scan_type.realbits;
unsigned int acc_mask, std_seq_config;
unsigned int bit, k;
int ret;
std_seq_config = bitmap_read(indio_dev->active_scan_mask, 0,
iio_get_masklength(indio_dev)) & GENMASK(15, 0);
ret = regmap_write(st->regmap, AD4691_STD_SEQ_CONFIG, std_seq_config);
if (ret)
return ret;
acc_mask = ~std_seq_config & GENMASK(15, 0);
ret = regmap_write(st->regmap, AD4691_ACC_MASK_REG, acc_mask);
if (ret)
return ret;
ret = regmap_write(st->regmap, AD4691_ACC_DEPTH_IN(0), st->osr);
if (ret)
return ret;
ret = ad4691_enter_conversion_mode(st);
if (ret)
return ret;
memset(st->scan_xfers, 0, sizeof(st->scan_xfers));
memset(st->scan_tx, 0, sizeof(st->scan_tx));
/*
* Each AVG_IN register read uses two transfers:
* TX: [reg_hi | 0x80, reg_lo] (address phase, CS stays asserted)
* RX: [data_hi, data_lo] (bpw-wide data phase, storagebits=16)
* Both TX and RX use bits_per_word=bpw: the SPI controller reads tx_buf
* as a native 16-bit word and shifts it out MSB-first. Store the exact
* 16-bit wire value as a plain native u16 — no endianness macro — so the
* wire bytes are correct on both LE and BE hosts. The read-address
* (0x8000 | reg) is already the 16-bit value we want on the wire.
* scan_tx is reused for TX addresses (mutually exclusive with the
* non-offload triggered-buffer path).
*/
k = 0;
iio_for_each_active_channel(indio_dev, bit) {
st->scan_tx[k] = 0x8000 | AD4691_AVG_IN(bit);
/* TX: address phase, CS stays asserted into data phase */
st->scan_xfers[2 * k].tx_buf = &st->scan_tx[k];
st->scan_xfers[2 * k].len = sizeof(*st->scan_tx);
st->scan_xfers[2 * k].bits_per_word = bpw;
/* RX: data phase, CS toggles after to delimit the next register op */
st->scan_xfers[2 * k + 1].len = sizeof(*st->scan_tx);
st->scan_xfers[2 * k + 1].bits_per_word = bpw;
st->scan_xfers[2 * k + 1].offload_flags = SPI_OFFLOAD_XFER_RX_STREAM;
st->scan_xfers[2 * k + 1].cs_change = 1;
k++;
}
/*
* State reset: single 4-byte write [addr_hi, addr_lo, STATE_RESET_ALL,
* OSC_EN=1]. ADDR_DESCENDING writes byte[3]=1 to OSC_EN_REG (0x180) as
* a deliberate side-write, keeping the oscillator enabled.
* scan_tx_reset is shared with the non-offload path (len=4 here vs
* len=3 there) since the two paths are mutually exclusive at probe.
*/
put_unaligned_be16(AD4691_STATE_RESET_REG, st->scan_tx_reset);
st->scan_tx_reset[2] = AD4691_STATE_RESET_ALL;
st->scan_tx_reset[3] = 1;
st->scan_xfers[2 * k].tx_buf = st->scan_tx_reset;
st->scan_xfers[2 * k].len = sizeof(st->scan_tx_reset);
/*
* 4-byte u8 buffer assembled with put_unaligned_be16(); leave
* bits_per_word at the default (8) so bytes go out in memory order.
*/
spi_message_init_with_transfers(&st->scan_msg, st->scan_xfers, 2 * k + 1);
st->scan_msg.offload = st->offload;
ret = spi_optimize_message(spi, &st->scan_msg);
if (ret)
goto err_exit_conversion;
ret = spi_offload_trigger_enable(st->offload, st->offload_trigger, &config);
if (ret)
goto err_unoptimize;
ret = ad4691_sampling_enable(st, true);
if (ret)
goto err_disable_trigger;
return 0;
err_disable_trigger:
spi_offload_trigger_disable(st->offload, st->offload_trigger);
err_unoptimize:
spi_unoptimize_message(&st->scan_msg);
err_exit_conversion:
ad4691_exit_conversion_mode(st);
return ret;
}
static int ad4691_cnv_burst_offload_buffer_predisable(struct iio_dev *indio_dev)
{
struct ad4691_state *st = iio_priv(indio_dev);
ad4691_sampling_enable(st, false);
spi_offload_trigger_disable(st->offload, st->offload_trigger);
spi_unoptimize_message(&st->scan_msg);
return ad4691_exit_conversion_mode(st);
}
static const struct iio_buffer_setup_ops ad4691_cnv_burst_offload_buffer_setup_ops = {
.postenable = ad4691_cnv_burst_offload_buffer_postenable,
.predisable = ad4691_cnv_burst_offload_buffer_predisable,
};
static ssize_t sampling_frequency_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad4691_state *st = iio_priv(indio_dev);
if (st->manual_mode && st->offload)
return sysfs_emit(buf, "%llu\n", READ_ONCE(st->trigger_hz));
return sysfs_emit(buf, "%lu\n", NSEC_PER_SEC / st->cnv_period_ns);
}
static ssize_t sampling_frequency_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad4691_state *st = iio_priv(indio_dev);
unsigned int freq;
int ret;
ret = kstrtouint(buf, 10, &freq);
if (ret)
return ret;
IIO_DEV_ACQUIRE_DIRECT_MODE(indio_dev, claim);
if (IIO_DEV_ACQUIRE_FAILED(claim))
return -EBUSY;
if (st->manual_mode && st->offload) {
struct spi_offload_trigger_config config = {
.type = SPI_OFFLOAD_TRIGGER_PERIODIC,
.periodic = { .frequency_hz = freq },
};
ret = spi_offload_trigger_validate(st->offload_trigger, &config);
if (ret)
return ret;
WRITE_ONCE(st->trigger_hz, config.periodic.frequency_hz);
return len;
}
ret = ad4691_set_pwm_freq(st, freq);
if (ret)
return ret;
return len;
}
static IIO_DEVICE_ATTR_RW(sampling_frequency, 0);
static const struct iio_dev_attr *ad4691_buffer_attrs[] = {
&iio_dev_attr_sampling_frequency,
NULL
};
static irqreturn_t ad4691_irq(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct ad4691_state *st = iio_priv(indio_dev);
/*
* Disable the IRQ before calling iio_trigger_poll(). The IRQ is
* re-enabled via the trigger .reenable callback, which the IIO core
* calls inside iio_trigger_notify_done() once use_count reaches zero.
* Re-enabling here (before notify_done) would race: a DATA_READY
* between enable_irq() and notify_done() calls iio_trigger_poll()
* while use_count > 0, dropping the event and permanently masking
* the IRQ.
*/
disable_irq_nosync(st->irq);
iio_trigger_poll(indio_dev->trig);
return IRQ_HANDLED;
}
static void ad4691_trigger_reenable(struct iio_trigger *trig)
{
struct ad4691_state *st = iio_trigger_get_drvdata(trig);
enable_irq(st->irq);
}
static const struct iio_trigger_ops ad4691_trigger_ops = {
.reenable = ad4691_trigger_reenable,
.validate_device = iio_trigger_validate_own_device,
};
static void ad4691_read_scan(struct iio_dev *indio_dev, s64 ts)
{
struct ad4691_state *st = iio_priv(indio_dev);
int ret;
guard(mutex)(&st->lock);
ret = spi_sync(st->spi, &st->scan_msg);
if (ret) {
dev_err_ratelimited(regmap_get_device(st->regmap),
"SPI scan failed: %d\n", ret);
return;
}
/*
* rx_buf pointers in scan_xfers point directly into scan.vals, so no
* copy is needed. The scan_msg already includes a STATE_RESET at the
* end (appended in preenable), so no explicit reset is needed here.
*/
iio_push_to_buffers_with_ts(indio_dev, st->vals, sizeof(st->vals), ts);
}
static irqreturn_t ad4691_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
ad4691_read_scan(indio_dev, pf->timestamp);
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
/*
* CNV burst mode: only allow our own trigger (driven by DATA_READY IRQ).
* Manual mode: external triggers (e.g. iio-trig-hrtimer) must be allowed
* because manual mode has no DATA_READY IRQ to fire the internal trigger.
* iio_trigger_ops.validate_device = iio_trigger_validate_own_device is
* correct in both modes — it prevents other devices from hijacking our
* internal trigger; the distinction here is only for iio_info.validate_trigger.
*/
static const struct iio_info ad4691_cnv_burst_info = {
.read_raw = ad4691_read_raw,
.write_raw = ad4691_write_raw,
.read_avail = ad4691_read_avail,
.debugfs_reg_access = ad4691_reg_access,
.validate_trigger = iio_validate_own_trigger,
};
static const struct iio_info ad4691_manual_info = {
.read_raw = ad4691_read_raw,
.write_raw = ad4691_write_raw,
.read_avail = ad4691_read_avail,
.debugfs_reg_access = ad4691_reg_access,
};
static int ad4691_pwm_setup(struct ad4691_state *st)
{
struct device *dev = regmap_get_device(st->regmap);
st->conv_trigger = devm_pwm_get(dev, "cnv");
if (IS_ERR(st->conv_trigger))
return dev_err_probe(dev, PTR_ERR(st->conv_trigger),
"Failed to get CNV PWM\n");
return ad4691_set_pwm_freq(st, st->info->max_rate);
}
static int ad4691_regulator_setup(struct ad4691_state *st)
{
struct device *dev = regmap_get_device(st->regmap);
int ret;
ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(ad4691_supplies),
ad4691_supplies);
if (ret)
return dev_err_probe(dev, ret, "Failed to get and enable supplies\n");
/*
* vdd-supply and ldo-in-supply are mutually exclusive:
* vdd-supply present → external 1.8V VDD; disable internal LDO.
* vdd-supply absent → enable internal LDO fed from ldo-in-supply.
* Having both simultaneously is strongly inadvisable per the datasheet.
*/
if (device_property_present(dev, "vdd-supply")) {
ret = devm_regulator_get_enable(dev, "vdd");
if (ret)
return dev_err_probe(dev, ret,
"Failed to get and enable VDD\n");
} else if (device_property_present(dev, "ldo-in-supply")) {
ret = devm_regulator_get_enable(dev, "ldo-in");
if (ret)
return dev_err_probe(dev, ret,
"Failed to get and enable LDO-IN\n");
st->ldo_en = true;
} else {
return dev_err_probe(dev, -EINVAL,
"missing one of vdd-supply, ldo-in-supply\n");
}
if (device_property_present(dev, "ref-supply")) {
st->vref_uV = devm_regulator_get_enable_read_voltage(dev, "ref");
if (st->vref_uV < 0)
return dev_err_probe(dev, st->vref_uV,
"Failed to get REF supply voltage\n");
} else if (device_property_present(dev, "refin-supply")) {
st->vref_uV = devm_regulator_get_enable_read_voltage(dev, "refin");
if (st->vref_uV < 0)
return dev_err_probe(dev, st->vref_uV,
"Failed to get REFIN supply voltage\n");
st->refbuf_en = true;
} else {
return dev_err_probe(dev, -EINVAL,
"missing one of ref-supply, refin-supply\n");
}
if (st->vref_uV < AD4691_VREF_uV_MIN || st->vref_uV > AD4691_VREF_uV_MAX)
return dev_err_probe(dev, -EINVAL,
"vref(%d) must be in the range [%u...%u]\n",
st->vref_uV, AD4691_VREF_uV_MIN,
AD4691_VREF_uV_MAX);
return 0;
}
static int ad4691_reset(struct ad4691_state *st)
{
struct device *dev = regmap_get_device(st->regmap);
struct reset_control *rst;
int ret;
rst = devm_reset_control_get_optional_exclusive(dev, NULL);
if (IS_ERR(rst))
return dev_err_probe(dev, PTR_ERR(rst), "Failed to get reset\n");
if (rst) {
/*
* Assert the reset line to guarantee a clean reset pulse on
* every probe, including driver reloads where the line may
* already be deasserted (reset_control_put() does not
* re-assert on release). tRESETL (minimum pulse width) = 10 ns
* (Table 5); kernel function-call overhead alone exceeds this,
* so no explicit delay is needed between assert and deassert.
*/
reset_control_assert(rst);
ret = reset_control_deassert(rst);
if (ret)
return ret;
} else {
/* No hardware reset available, fall back to software reset. */
ret = regmap_write(st->regmap, AD4691_SPI_CONFIG_A_REG,
AD4691_SW_RESET);
if (ret)
return ret;
}
/*
* Wait 300 µs (Table 5) for the device to complete its internal reset
* sequence before accepting SPI commands.
*/
fsleep(300);
return 0;
}
static int ad4691_config(struct ad4691_state *st)
{
struct device *dev = regmap_get_device(st->regmap);
enum ad4691_ref_ctrl ref_val;
unsigned int val;
int ret;
/*
* Determine buffer conversion mode from DT: if a PWM is provided it
* drives the CNV pin (CNV_BURST_MODE); otherwise CNV is tied to CS
* and each SPI transfer triggers a conversion (MANUAL_MODE).
* Both modes idle in AUTONOMOUS mode so that read_raw can use the
* internal oscillator without disturbing the hardware configuration.
*/
if (device_property_present(dev, "pwms")) {
st->manual_mode = false;
ret = ad4691_pwm_setup(st);
if (ret)
return ret;
} else {
st->manual_mode = true;
}
switch (st->vref_uV) {
case AD4691_VREF_uV_MIN ... AD4691_VREF_2P5_uV_MAX:
ref_val = AD4691_VREF_2P5;
break;
case AD4691_VREF_2P5_uV_MAX + 1 ... AD4691_VREF_3P0_uV_MAX:
ref_val = AD4691_VREF_3P0;
break;
case AD4691_VREF_3P0_uV_MAX + 1 ... AD4691_VREF_3P3_uV_MAX:
ref_val = AD4691_VREF_3P3;
break;
case AD4691_VREF_3P3_uV_MAX + 1 ... AD4691_VREF_4P096_uV_MAX:
ref_val = AD4691_VREF_4P096;
break;
case AD4691_VREF_4P096_uV_MAX + 1 ... AD4691_VREF_uV_MAX:
ref_val = AD4691_VREF_5P0;
break;
default:
return dev_err_probe(dev, -EINVAL,
"Unsupported vref voltage: %d uV\n",
st->vref_uV);
}
val = FIELD_PREP(AD4691_REF_CTRL_MASK, ref_val);
if (st->refbuf_en)
val |= AD4691_REFBUF_EN;
ret = regmap_write(st->regmap, AD4691_REF_CTRL, val);
if (ret)
return dev_err_probe(dev, ret, "Failed to write REF_CTRL\n");
ret = regmap_assign_bits(st->regmap, AD4691_DEVICE_SETUP,
AD4691_LDO_EN, st->ldo_en);
if (ret)
return dev_err_probe(dev, ret, "Failed to write DEVICE_SETUP\n");
/*
* Set the internal oscillator to the highest rate this chip supports.
* Index 0 (1 MHz) exceeds the 500 kHz max of AD4691/AD4693, so those
* chips start at index 1 (500 kHz).
*/
ret = regmap_write(st->regmap, AD4691_OSC_FREQ_REG,
ad4691_samp_freq_start(st->info));
if (ret)
return dev_err_probe(dev, ret, "Failed to write OSC_FREQ\n");
st->target_osc_freq_Hz = ad4691_osc_freqs_Hz[ad4691_samp_freq_start(st->info)];
ret = regmap_update_bits(st->regmap, AD4691_ADC_SETUP,
AD4691_ADC_MODE_MASK, AD4691_AUTONOMOUS_MODE);
if (ret)
return dev_err_probe(dev, ret, "Failed to write ADC_SETUP\n");
ad4691_precompute_samp_freq_avail(st);
return 0;
}
static int ad4691_setup_triggered_buffer(struct iio_dev *indio_dev,
struct ad4691_state *st)
{
struct device *dev = regmap_get_device(st->regmap);
struct iio_trigger *trig;
unsigned int i;
int irq, ret;
/*
* Manual mode exposes channels without the oversampling_ratio attribute
* because ACC_DEPTH_IN is not configured in manual mode.
*/
if (st->manual_mode)
indio_dev->channels = st->info->sw_info->manual_channels;
else
indio_dev->channels = st->info->sw_info->channels;
indio_dev->num_channels = st->info->sw_info->num_channels;
indio_dev->info = st->manual_mode ? &ad4691_manual_info : &ad4691_cnv_burst_info;
/*
* Manual mode relies on an external trigger (e.g. iio-trig-hrtimer);
* no internal trigger is needed or registered.
*/
if (st->manual_mode)
return devm_iio_triggered_buffer_setup(dev, indio_dev,
iio_pollfunc_store_time,
ad4691_trigger_handler,
&ad4691_manual_buffer_setup_ops);
/*
* CNV burst mode: allocate an internal trigger driven by the
* DATA_READY IRQ on the GP pin.
*/
trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name,
iio_device_id(indio_dev));
if (!trig)
return -ENOMEM;
trig->ops = &ad4691_trigger_ops;
iio_trigger_set_drvdata(trig, st);
ret = devm_iio_trigger_register(dev, trig);
if (ret)
return dev_err_probe(dev, ret, "IIO trigger register failed\n");
indio_dev->trig = iio_trigger_get(trig);
/*
* The GP pin named in interrupt-names asserts at end-of-conversion.
* The IRQ handler fires the IIO trigger so the trigger handler can
* read and push the sample to the buffer. The IRQ is kept disabled
* until the buffer is enabled.
*/
irq = -ENXIO;
for (i = 0; i < ARRAY_SIZE(ad4691_gp_names); i++) {
irq = fwnode_irq_get_byname(dev_fwnode(dev),
ad4691_gp_names[i]);
if (irq > 0 || irq == -EPROBE_DEFER)
break;
}
if (irq < 0)
return dev_err_probe(dev, irq, "failed to get GP interrupt\n");
st->irq = irq;
ret = ad4691_gpio_setup(st, i);
if (ret)
return ret;
/*
* The handler only calls disable_irq_nosync() and iio_trigger_poll(),
* both safe in hardirq context, so register as a hard IRQ handler.
* IRQF_NO_AUTOEN keeps it disabled until the buffer is enabled.
*/
ret = devm_request_irq(dev, irq, ad4691_irq, IRQF_NO_AUTOEN,
indio_dev->name, indio_dev);
if (ret)
return ret;
return devm_iio_triggered_buffer_setup_ext(dev, indio_dev,
iio_pollfunc_store_time,
ad4691_trigger_handler,
IIO_BUFFER_DIRECTION_IN,
&ad4691_cnv_burst_buffer_setup_ops,
ad4691_buffer_attrs);
}
static int ad4691_setup_offload(struct iio_dev *indio_dev,
struct ad4691_state *st,
struct spi_offload *spi_offload)
{
struct device *dev = regmap_get_device(st->regmap);
struct dma_chan *rx_dma;
int ret;
st->offload = spi_offload;
/*
* CNV burst offload exposes oversampling_ratio (ACC_DEPTH_IN is
* configured per channel at buffer enable). Manual offload does not
* configure ACC_DEPTH_IN, so it uses a separate channel array
* without the oversampling_ratio attribute. Both paths use IIO_CPU
* (no .endianness annotation) because bits_per_word=16 causes the
* SPI Engine to produce native 16-bit DMA words.
*/
if (st->manual_mode)
indio_dev->channels = st->info->offload_info->manual_channels;
else
indio_dev->channels = st->info->offload_info->channels;
indio_dev->num_channels = st->info->offload_info->num_channels;
/*
* Offload path uses DMA directly; no IIO trigger is involved, so
* external triggers are not restricted (no validate_trigger).
*/
indio_dev->info = &ad4691_manual_info;
if (st->manual_mode) {
st->offload_trigger =
devm_spi_offload_trigger_get(dev, st->offload,
SPI_OFFLOAD_TRIGGER_PERIODIC);
if (IS_ERR(st->offload_trigger))
return dev_err_probe(dev, PTR_ERR(st->offload_trigger),
"Failed to get periodic offload trigger\n");
st->trigger_hz = AD4691_OFFLOAD_INITIAL_TRIGGER_HZ;
} else {
struct spi_offload_trigger_info trigger_info = {
.fwnode = dev_fwnode(dev),
.ops = &ad4691_offload_trigger_ops,
.priv = st,
};
ret = devm_spi_offload_trigger_register(dev, &trigger_info);
if (ret)
return dev_err_probe(dev, ret,
"Failed to register offload trigger\n");
st->offload_trigger =
devm_spi_offload_trigger_get(dev, st->offload,
SPI_OFFLOAD_TRIGGER_DATA_READY);
if (IS_ERR(st->offload_trigger))
return dev_err_probe(dev, PTR_ERR(st->offload_trigger),
"Failed to get DATA_READY offload trigger\n");
}
rx_dma = devm_spi_offload_rx_stream_request_dma_chan(dev, st->offload);
if (IS_ERR(rx_dma))
return dev_err_probe(dev, PTR_ERR(rx_dma),
"Failed to get offload RX DMA channel\n");
if (st->manual_mode)
indio_dev->setup_ops = &ad4691_manual_offload_buffer_setup_ops;
else
indio_dev->setup_ops = &ad4691_cnv_burst_offload_buffer_setup_ops;
ret = devm_iio_dmaengine_buffer_setup_with_handle(dev, indio_dev, rx_dma,
IIO_BUFFER_DIRECTION_IN);
if (ret)
return ret;
indio_dev->buffer->attrs = ad4691_buffer_attrs;
return 0;
}
static int ad4691_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct spi_offload *spi_offload;
struct iio_dev *indio_dev;
struct ad4691_state *st;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
st->spi = spi;
st->info = spi_get_device_match_data(spi);
if (!st->info)
return -ENODEV;
st->osr = 1;
ret = devm_mutex_init(dev, &st->lock);
if (ret)
return ret;
st->regmap = devm_regmap_init(dev, NULL, spi, &ad4691_regmap_config);
if (IS_ERR(st->regmap))
return dev_err_probe(dev, PTR_ERR(st->regmap),
"Failed to initialize regmap\n");
ret = ad4691_regulator_setup(st);
if (ret)
return ret;
ret = ad4691_reset(st);
if (ret)
return ret;
ret = ad4691_config(st);
if (ret)
return ret;
spi_offload = devm_spi_offload_get(dev, spi, &ad4691_offload_config);
ret = PTR_ERR_OR_ZERO(spi_offload);
if (ret == -ENODEV)
spi_offload = NULL;
else if (ret)
return dev_err_probe(dev, ret, "Failed to get SPI offload\n");
indio_dev->name = st->info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
if (spi_offload)
ret = ad4691_setup_offload(indio_dev, st, spi_offload);
else
ret = ad4691_setup_triggered_buffer(indio_dev, st);
if (ret)
return ret;
return devm_iio_device_register(dev, indio_dev);
}
static const struct of_device_id ad4691_of_match[] = {
{ .compatible = "adi,ad4691", .data = &ad4691_chip_info },
{ .compatible = "adi,ad4692", .data = &ad4692_chip_info },
{ .compatible = "adi,ad4693", .data = &ad4693_chip_info },
{ .compatible = "adi,ad4694", .data = &ad4694_chip_info },
{ }
};
MODULE_DEVICE_TABLE(of, ad4691_of_match);
static const struct spi_device_id ad4691_id[] = {
{ .name = "ad4691", .driver_data = (kernel_ulong_t)&ad4691_chip_info },
{ .name = "ad4692", .driver_data = (kernel_ulong_t)&ad4692_chip_info },
{ .name = "ad4693", .driver_data = (kernel_ulong_t)&ad4693_chip_info },
{ .name = "ad4694", .driver_data = (kernel_ulong_t)&ad4694_chip_info },
{ }
};
MODULE_DEVICE_TABLE(spi, ad4691_id);
static struct spi_driver ad4691_driver = {
.driver = {
.name = "ad4691",
.of_match_table = ad4691_of_match,
},
.probe = ad4691_probe,
.id_table = ad4691_id,
};
module_spi_driver(ad4691_driver);
MODULE_AUTHOR("Radu Sabau <radu.sabau@analog.com>");
MODULE_DESCRIPTION("Analog Devices AD4691 Family ADC Driver");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS("IIO_DMA_BUFFER");
MODULE_IMPORT_NS("IIO_DMAENGINE_BUFFER");
Reference in New Issue View Git Blame Copy Permalink