linux/drivers/gpu/nova-core/falcon/fsp.rs
Gary Guo 99676aed1f gpu: nova-core: move lifetime to Bar0
Currently Nova code uses `&'a Bar0` a lot. This is `&'a Mmio`, where `Mmio`
represents an owned MMIO region; this type only exists as a target for
`Deref` so `Bar` and `IoMem` can share code and should be avoided to be
named directly. The upcoming I/O projection series would make `Io` trait
much simpler to implement, and thus the owned MMIO type would be removed
in favour of direct `Io` implementation on `Bar` and `IoMem`.

Add lifetime parameter to `Bar0<'a>` and change it to be alias of `&'a
pci::Bar<'a, ..>`. This also prepares Nova core so that when I/O projection
series land, this could be changed to using a MMIO view type directly which
avoids double indirection.

Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260602170416.2268531-1-gary@kernel.org
[ Rebase onto latest drm-rust-next (Blackwell enablement). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2026-06-03 22:10:51 +02:00

172 lines
5.2 KiB
Rust

// SPDX-License-Identifier: GPL-2.0
// SPDX-FileCopyrightText: Copyright (c) 2026 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
//! FSP (Foundation Security Processor) falcon engine for Hopper/Blackwell GPUs.
//!
//! The FSP falcon handles secure boot and Chain of Trust operations
//! on Hopper and Blackwell architectures, replacing SEC2's role.
use kernel::{
io::{
poll::read_poll_timeout,
register::{
Array,
RegisterBase,
WithBase, //
},
Io, //
},
prelude::*,
time::Delta,
};
use crate::{
driver::Bar0,
falcon::{
Falcon,
FalconEngine,
PFalcon2Base,
PFalconBase, //
},
num,
regs, //
};
/// FSP message timeout in milliseconds.
const FSP_MSG_TIMEOUT_MS: i64 = 2000;
/// Type specifying the `Fsp` falcon engine. Cannot be instantiated.
pub(crate) struct Fsp(());
impl RegisterBase<PFalconBase> for Fsp {
const BASE: usize = 0x8f2000;
}
impl RegisterBase<PFalcon2Base> for Fsp {
const BASE: usize = 0x8f3000;
}
impl FalconEngine for Fsp {}
impl Falcon<Fsp> {
/// Writes `data` to FSP external memory at offset `0`.
///
/// `data` is interpreted as little-endian 32-bit words. Returns `EINVAL`
/// if the `data` length is not 4-byte aligned.
fn write_emem(&mut self, bar: Bar0<'_>, data: &[u8]) -> Result {
if data.len() % 4 != 0 {
return Err(EINVAL);
}
// Begin a write burst at offset `0`, auto-incrementing on each write.
bar.write(
WithBase::of::<Fsp>(),
regs::NV_PFALCON_FALCON_EMEMC::zeroed().with_aincw(true),
);
for chunk in data.chunks_exact(4) {
let value = u32::from_le_bytes([chunk[0], chunk[1], chunk[2], chunk[3]]);
// Write the next 32-bit `value`; hardware advances the offset.
bar.write(
WithBase::of::<Fsp>(),
regs::NV_PFALCON_FALCON_EMEMD::zeroed().with_data(value),
);
}
Ok(())
}
/// Reads FSP external memory from offset `0` into `data`.
///
/// `data` is stored as little-endian 32-bit words. Returns `EINVAL` if
/// the `data` length is not 4-byte aligned.
fn read_emem(&mut self, bar: Bar0<'_>, data: &mut [u8]) -> Result {
if data.len() % 4 != 0 {
return Err(EINVAL);
}
// Begin a read burst at offset `0`, auto-incrementing on each read.
bar.write(
WithBase::of::<Fsp>(),
regs::NV_PFALCON_FALCON_EMEMC::zeroed().with_aincr(true),
);
for chunk in data.chunks_exact_mut(4) {
// Read the next 32-bit word; hardware advances the offset.
let value = bar.read(regs::NV_PFALCON_FALCON_EMEMD::of::<Fsp>()).data();
chunk.copy_from_slice(&value.to_le_bytes());
}
Ok(())
}
/// Poll FSP for incoming data.
///
/// Returns the size of available data in bytes, or 0 if no data is available.
///
/// The FSP message queue is not circular. Pointers are reset to 0 after each
/// message exchange, so `tail >= head` is always true when data is present.
fn poll_msgq(&self, bar: Bar0<'_>) -> u32 {
let head = bar.read(regs::NV_PFSP_MSGQ_HEAD::at(0)).val();
let tail = bar.read(regs::NV_PFSP_MSGQ_TAIL::at(0)).val();
if head == tail {
return 0;
}
// TAIL points at last DWORD written, so add 4 to get total size.
tail.saturating_sub(head).saturating_add(4)
}
/// Writes `packet` to FSP EMEM and updates the queue pointers to notify FSP.
///
/// Returns `EINVAL` if `packet` is empty or its length is not 4-byte aligned.
pub(crate) fn send_msg(&mut self, bar: Bar0<'_>, packet: &[u8]) -> Result {
if packet.is_empty() {
return Err(EINVAL);
}
self.write_emem(bar, packet)?;
// Update queue pointers. TAIL points at the last DWORD written.
let tail_offset = u32::try_from(packet.len() - 4).map_err(|_| EINVAL)?;
bar.write(
Array::at(0),
regs::NV_PFSP_QUEUE_TAIL::zeroed().with_address(tail_offset),
);
bar.write(
Array::at(0),
regs::NV_PFSP_QUEUE_HEAD::zeroed().with_address(0),
);
Ok(())
}
/// Reads the next message from FSP EMEM into a newly-allocated buffer and resets the queue
/// pointers.
///
/// Returns `ETIMEDOUT` if no message was available until timeout, or a regular error code if a
/// memory allocation error occurred.
pub(crate) fn recv_msg(&mut self, bar: Bar0<'_>) -> Result<KVec<u8>> {
let msg_size = read_poll_timeout(
|| Ok(self.poll_msgq(bar)),
|&size| size > 0,
Delta::from_millis(10),
Delta::from_millis(FSP_MSG_TIMEOUT_MS),
)
.map(num::u32_as_usize)?;
let mut buffer = KVec::<u8>::new();
buffer.resize(msg_size, 0, GFP_KERNEL)?;
self.read_emem(bar, &mut buffer)?;
// Reset message queue pointers after reading.
bar.write(Array::at(0), regs::NV_PFSP_MSGQ_TAIL::zeroed().with_val(0));
bar.write(Array::at(0), regs::NV_PFSP_MSGQ_HEAD::zeroed().with_val(0));
Ok(buffer)
}
}